Massive multiple input and multiple output (Massive MIMO) is a key technique to achieve high system capacity and user data rate for the fifth generation (5G) radio access network (RAN). To implement Massive MIMO in 5G, how much Massive MIMO meets our expectation with various user equipment (UEs) in different environments should be carefully addressed. We focused on using Massive MIMO in the low super-high-frequency (SHF) band, which is expected to be used for 5G commercial bands relatively soon. We previously developed a prototype low-SHF-band centralized-RAN Massive MIMO system that has a flexible active antenna system (AAS)-unit configuration and facilitates advanced radio coordination features, such as coordinated beamforming (CB) coordinated multi-point (CoMP). In this study, we conduct field trials to evaluate downlink (DL) multi-user (MU)-MIMO performance by using our prototype system in outdoor and indoor environments. The results indicate that about 96% of the maximum total DL system throughput can be achieved with 1 AAS unit outdoors and 2 AAS units indoors. We also investigate channel capacity based on the real propagation channel estimation data measured by the prototype system. Compared with without-CB mode, the channel capacity of with-CB mode increases by a maximum of 80% and 104%, respectively, when the location of UEs are randomly selected in the outdoor and indoor environments. Furthermore, the results from the field trial of with-CB mode with eight UEs indicate that the total DL system throughput and user data rate can be significantly improved.

By incorporating cloud computing capabilities to provide radio access functionalities, Cloud Radio Access Networks (CRANs) are considered to be a key enabling technology of future 5G and beyond communication systems. In CRANs, centralized radio resource allocation optimization is performed over a large number of small cells served by simple access points, the Remote Radio Heads (RRHs). However, the fronthaul links connecting each RRH to the cloud introduce delays and entail imperfect Channel State Information (CSI) knowledge at the cloud processors. In order to satisfy the stringent latency requirements envisioned for 5G applications, the concept of Fog Radio Access Networks (FogRANs) has recently emerged for providing cloud computing at the edge of the network. Although FogRAN may alleviate the latency and CSI quality issues of CRAN, its distributed nature degrades network interference mitigation and global system performance. Therefore, we investigate the design of tailored user pre-scheduling and beamforming for FogRANs. In particular, we propose a hybrid algorithm that exploits both the centralized feature of the cloud for globally-optimized pre-scheduling using imperfect global CSIs, and the distributed nature of FogRAN for accurate beamforming with high quality local CSIs. The centralized phase enables the interference patterns over the global network to be considered, while the distributed phase allows for latency reduction, in line with the requirements of FogRAN applications. Simulation results show that our proposed algorithm outperforms the baseline algorithm under imperfect CSIs, jointly in terms of throughput, energy efficiency, as well as delay.

Temporal behavior is a primary aspect of business process executions. Herein, we propose a temporal outlier detection and analysis method for business processes. Particularly, the method performs correlation analysis between the execution times of traces and activities to determine the type of activities that significantly influences the anomalous temporal behavior of a trace. To this end, we describe the modeling of temporal behaviors considering different control-flow patterns of business processes. Further, an execution time matrix with execution times of activities in all traces is constructed by using the event logs. Based on this matrix, we perform temporal outlier detection and correlation-based analysis.

We have developed a novel array configuration based on the combination of sum and difference co-arrays. There have been many studies on array antenna configurations that enhance the degree of freedom (DOF) of an array, but the maximum DOF of the difference co-array configuration is often limited. With our proposed array configuration, called “sum and difference composite co-array”, we aim to further enhance the DOF by combining the concept of sum co-array and difference co-array. The performance of the proposed array configuration is evaluated through computer simulated beamforming*.

In this letter, the differential uniformity of power function f(x)=xe over GF(3m) is studied, where m≥3 is an odd integer and $e=rac{3^m-3}{4}$. It is shown that Δf≤3 and the power function is not CCZ-equivalent to the known ones. Moreover, we consider a family of ternary cyclic code C(1,e), which is generated by mω(x)mωe(x). Herein, ω is a primitive element of GF(3m), mω(x) and mωe(x) are minimal polynomials of ω and ωe, respectively. The parameters of this family of cyclic codes are determined. It turns out that C(1,e) is optimal with respect to the Sphere Packing bound.

Efficient road-lane detection is expected to be achievable by application of the Hough transform (HT) which realizes high-accuracy straight-line extraction from images. The main challenge for HT-hardware implementation in actual applications is the trade-off optimization between accuracy maximization, power-dissipation reduction and real-time requirements. We report a HT-hardware architecture for road-lane detection with parallelized voting procedure, local maximum algorithm and FPGA-prototype implementation. Parallelization of the global design is realized on the basis of θ-value discretization in the Hough space. Four major hardware modules are developed for edge detection in the original video frames, computation of the characteristic edge-pixel values (ρ,θ) in Hough-space, voting procedure for each (ρ,θ) pair with parallel local-maximum-based peak voting-point extraction in Hough space to determine the detected straight lines. Implementation of a prototype system for real-time road-lane detection on a low-cost DE1 platform with a Cyclone II FPGA device was verified to be possible. An average detection speed of 135 frames/s for VGA (640x480)-frames was achieved at 50 MHz working frequency.

This paper presents a rigorous analysis of the electromagnetic scattering and transmission of misaligned dual metallic grating screens. The Fourier transform and the mode-matching technique are employed to obtain an analytical solution. Numerical results show that misaligned dual metal grating screens exhibit asymmetric scattering and transmission properties with respect to the scattering and transmission angles. Parametric studies are conducted in terms of the lateral displacement and vertical distance between the dual metallic grating screens. For validation, the proposed method is compared with a numerical simulation and good agreement has been achieved.

This letter presents an efficient hybrid direction of arrival (DOA) estimation scheme for massive uniform linear array. In this scheme, the DOA estimator based on a discrete Fourier transform (DFT) is first applied to acquire coarse initial DOA estimates for single data snapshot. And then, the fine DOA is accurately estimated through using the iterative search estimator within a very small region. It iteratively searches for correct DOA vector by minimizing the objective function using a Taylor series approximation of the DOA vector with the one initially estimated. Since the proposed scheme does not need to perform eigen-decomposition and spectrum search while maintaining better DOA estimates, it also has low complexity and real-time capability. Simulation results are presented to demonstrate the efficiency of the proposed scheme.

Since the hardware resource of a single FPGA is limited, one idea to scale the performance of FPGA-based HPC applications is to expand the design space with multiple FPGAs. This paper presents a scalable architecture of a deeply pipelined stream computing platform, where available parallelism and inter-FPGA link characteristics are investigated to achieve a scaled performance. For a practical exploration of this vast design space, a performance model is presented and verified with the evaluation of a tsunami simulation application implemented on Intel Arria 10 FPGAs. Finally, scalability analysis is performed, where speedup is achieved when increasing the computing pipeline over multiple FPGAs while maintaining the problem size of computation. Performance is scaled with multiple FPGAs; however, performance degradation occurs with insufficient available bandwidth and large pipeline overhead brought by inadequate data stream size. Tsunami simulation results show that the highest scaled performance for 8 cascaded Arria 10 FPGAs is achieved with a single pipeline of 5 stream processing elements (SPEs), which obtained a scaled performance of 2.5 TFlops and a parallel efficiency of 98%, indicating the strong scalability of the multi-FPGA stream computing platform.

In content oriented networks (CON), routers in a network are generally equipped with local cache storages and store incoming contents temporarily. Efficient utilization of total cache storage in networks is one of the most important technical issues in CON, as it can reduce content server load, content download latency and network traffic. Performance of networked cache is reported to strongly depend on both cache decision and content request routing. In this paper, we evaluate several combinations of these two strategies. Especially for routing, we take up off-path cache routing, Breadcrumbs, as one of the content request routing proposals. Our performance evaluation results show that off-path cache routing, Breadcrumbs, suffers low performance with cache decisions which generally has high performance with shortest path routing (SPR), and obtains excellent performance with TERC (Transparent En-Route Cache) which is well-known to have low performance with widely used SPR. Our detailed evaluation results in two network environments, emerging CONs and conventional IP, show these insights hold in both of these two network environments.

Low Power Wide Area Network (LPWAN) is designed for low-bandwidth, low-power, long-distance, large-scale connected IoT applications and realistic for networking in an emergency or restricted situation, so it has been proposed as an attractive communication technology to handle unexpected situations that occur during and/or after a disaster. However, the traditional LPWAN with its default protocol will reduce the communication efficiency in disaster situation because a large number of users will send and receive emergency information result in communication jams and soaring error rates. In this paper, we proposed a LPWAN based decentralized network structure as an extension of our previous Disaster Information Sharing System (DISS). Our network structure is powered by Named Node Networking (3N) which is based on the Information-Centric Networking (ICN). This network structure optimizes the excessive useless packet forwarding and path optimization problems with node name routing (NNR). To verify our proposal, we conduct a field experiment to evaluate the efficiency of packet path forwarding between 3N+LPWA structure and ICN+LPWA structure. Experimental results confirm that the load of the entire data transmission network is significantly reduced after NNR optimized the transmission path.

In order to solve the problem in Automatic Identification System (AIS) that the signal in the target slot cannot be correctly received due to partial overlap of signals in adjacent time slots, the paper introduces a new criterion: maximum expected signal power (MESP) and proposes a novel beamforming algorithm based on generalized singular value decomposition (GSVD) and orthogonal projection. The algorithm employs GSVD to estimate the signal subspace, and adopts orthogonal projection to project the received signal onto the orthogonal subspace of the non-target signal. Then, beamforming technique is used to maximize the output power of the target signal on the basis of MESP. Theoretical analysis and simulation results show the effectiveness of the proposed algorithm.

Inter-channel crosstalk is one of the crucial issues in multichannel optical systems. Conventional studies assume that the crosstalk and the main signals have identical format. The present study, in contrast, considers different signal formats for the main and crosstalk lights, and shows that bit error degradation is different depending on the modulation format. Statistical properties of the crosstalk are also investigated. The result quantitatively confirms that a crosstalk light whose signal distribution is closer to a Gaussian profile causes larger degradation.

Saliency quality assessment aims at estimating the objective quality of a saliency map without access to the ground-truth. Existing works typically evaluate saliency quality by utilizing information from saliency maps to assess its compactness and closedness while ignoring the information from image content which can be used to assess the consistence and completeness of foreground. In this letter, we propose a novel multi-information fusion network to capture the information from both the saliency map and image content. The key idea is to introduce a siamese module to collect information from foreground and background, aiming to assess the consistence and completeness of foreground and the difference between foreground and background. Experiments demonstrate that by incorporating image content information, the performance of the proposed method is significantly boosted. Furthermore, we validate our method on two applications: saliency detection and segmentation. Our method is utilized to choose optimal saliency map from a set of candidate saliency maps, and the selected saliency map is feeded into an segmentation algorithm to generate a segmentation map. Experimental results verify the effectiveness of our method.

In this paper, a scramble phase assisting weighted-type fractional Fourier transform (SPA-WFRFT) based system is proposed to guarantee the communication's security. The original transmitting signal is divided into two parts. The first part is modulated by WFRFT and subsequently makes up the constellation beguiling. The other part is used to generate the scramble phase and also to assist in the encryption of the WFRFT modulated signal dynamically. The novel constellation optimal model is built and solved through the genetic algorithm (GA) for the constellation beguiling. And the double pseudo scheme is implemented for the scramble phase generation. Theoretical analyses show that excellent security performances and high spectral efficiency can be attained. Final simulations are carried out to evaluate the performances of the SPA-WFRFT based system, and demonstrate that the proposed system can effectively degrade the unauthorized receivers' bit error rate (BER) performance while maintaining its own communication quality.

Many autocorrelation-based frequency estimation algorithms have been proposed. However, some of them cannot construct a strict linear prediction (LP) property among the adjacent autocorrelation lags, which affects the estimators' performance. To improve the precision of frequency estimation, two novel autocorrelation based frequency estimation methods of the real sinusoid signal in additive white Gaussian noise (AWGN) are proposed in this paper. Firstly, a simple method is introduced to transform the real sinusoid signal into the noncircular signal. Secondly, the autocorrelation of the noncircular signal is analyzed and a strict LP property is constructed among the adjacent autocorrelation lags of the noncircular signal. Thirdly, the least squares (LS) and reformed Pisarenko harmonic decomposer (RPHD) frameworks are employed to improve estimation accuracy. The simulation results match well with the theoretical values. In addition, computer simulations demonstrate that the proposed algorithm provides high estimation accuracy and good noise suppression capability.

A number of all-optical signal processing schemes based on nonlinear optical effects have been proposed and demonstrated for use in future photonic networks. Since various modulation formats have been developed for optical communication systems, all-optical converters between different modulation formats will be a key technology to connect networks transparently and efficiently. This paper reviews our recent works on all-optical modulation format conversion technologies in order to highlight the fundamental principles and applications in variety of all-optical signal processing schemes.

This study presents a joint dictionary learning approach for speech emotion recognition named locality preserved joint nonnegative matrix factorization (LP-JNMF). The learned representations are shared between the learned dictionaries and annotation matrix. Moreover, a locality penalty term is incorporated into the objective function. Thus, the system's discriminability is further improved.

Massive multiple-input multiple-output (MIMO) realizes simultaneous transmission to a large number of mobile stations (MSs) and improves frequency utilization efficiency. It is drawing attention as the key technology of the fifth-generation (5G) mobile communication systems. The 5G system is going to be implemented in a high frequency band and massive MIMO beamforming (BF) is applied to compensate propagation loss. In the conventional BF scheme, a transmit beam is selected based on the power of received signals over subcarriers. The signal on a different subcarrier is transmitted with a different directivity. To improve the accuracy of beam selection, this paper proposes a transmit beam selection scheme for massive MIMO. The proposed scheme calculates the expected responses of the signals over the subcarriers based on the relative directivity between a base station (BS) and a MS. The MS calculates the correlation between the received signals and each of the expected response sequences. It then selects the beam with the highest correlation value. It is shown in this paper that the proposed scheme can improve the average signal-to-noise ratio of a received signal by about 1.5dB as compared with that of the power based search scheme. It is also shown that the proposed scheme with limited response coefficients can reduce the computational complexity by a factor of 1/100 while it still increases the average SNR by about 1.0dB.

A novel algorithm is proposed for estimating the direction of arrival (DOA) of linear frequency modulated (LFM) signals for the uniform circular array (UCA). Firstly, the UCA is transformed into an equivalent virtual uniform linear array (ULA) using the mode-space algorithm. Then, the short time Fourier transform (STFT) of each element's output is worked out. We can obtain the spatial time-frequency distribution matrix of the virtual ULA by selecting the single-source time-frequency (t-f) points in the t-f plane and then get the signal subspace of the array. The characteristics nature of the Bessel function allow us to obtain the multiple invariance (MI) of the virtual ULA. So the multiple rotational invariant equation of the array can be obtained and its closed-form solution can be worked out using the multi-least-squares (MLS) criterion. Finally, the two dimensional (2-D) DOA estimation of LFM signals for UCA can be obtained. Numerical simulation results illustrate that the UCA-STFT-MI-ESPRIT algorithm proposed in this paper can improve the estimation precision greatly compared with the traditional ESPRIT-like algorithms and has much lower computational complexity than the MUSIC-like algorithms.