This paper describes the design method of a broadband CMOS stacked power amplifier using harmonic control over wide bandwidths in a 0.11,$mu $m standard CMOS process. The high-efficiency can be obtained over wide bandwidths by designing a load impedance circuit as purely reactive as possible to the harmonics with broadband fundamental matching, which is based on continuous Class-F mode of operation. Furthermore, the stacked topology overcomes the low breakdown voltage limit of CMOS transistor and increases output impedance. With a 5-V supply and a fixed matching circuitry, the suggested power amplifier (PA) achieves a saturated output power of over 26.7,dBm and a drain efficiency of over 38% from 1.6,GHz to 2.2,GHz. In W-CDMA modulation signal measurements, the PA generates linear power and power added efficiency of over 23.5,dBm and 33% (@ACLR $=-33$,dBc).

The next generation wireless broadcasting systems combining with MIMO technology has drawn much attention recently. Considering the coexistence of receivers equipped with different numbers of antennas in these systems, there exists the special requirement to maximize the transmission rate for receivers having more antennas, while guaranteeing the normal rate for receivers having less antennas. In this letter, superposition coding is proposed to fulfill this requirement and the concept of broadcast cluster is introduced, wherein the optimized power allocation parameters are derived. The BER simulations for multiple services are provided to verify the significant SNR performance gap between receivers with various numbers of receive antennas.

In this paper, we propose a novel method for road sign detection and recognition in complex scene real world images. Our algorithm consists of four basic steps. First, we employ a regional contrast based bottom-up visual saliency method to highlight the traffic sign regions, which usually have dominant color contrast against the background. Second, each type of traffic sign has special color distribution, which can be explored by top-down visual saliency to enhance the detection precision and to classify traffic signs into different categories. A bag-of-words (BoW) model and a color name descriptor are employed to compute the special-class distribution. Third, the candidate road sign blobs are extracted from the final saliency map, which are generated by combining the bottom-up and the top-down saliency maps. Last, the color and shape cues are fused in the BoW model to express blobs, and a support vector machine is employed to recognize road signs. Experiments on real world images show a high success rate and a low false hit rate and demonstrate that the proposed framework is applicable to prohibition, warning and obligation signs. Additionally, our method can be applied to achromatic signs without extra processing.

This paper presents an efficient multi-service allocation scheme for the digital television terrestrial broadcasting systems in which the fixed service is modulated by orthogonal frequency division multiplexing and quadrature amplitude modulation (OFDM/QAM) with larger FFT size and the added mobile service is modulated by OFDM and offset quadrature amplitude modulation (OQAM) with smaller FFT size. The two different types of services share one 8MHz broadcasting channel. The isotropic orthogonal transform algorithm (IOTA) is chosen as the shaping filter for OQAM because of its isotropic convergence in time and frequency domain and the proper FFT size is selected to maximum the transmission capacity under mobile environment. The corresponding transceiver architecture is also proposed and analyzed. Simulations show that the newly added mobile service generates much less out-of-band interference to the fixed service and has a better performance under fast fading wireless channels.

High-speed wireless access technologies have evolved over the last years setting new challenges for TCP. That is, to effectively utilize the available network resources and to minimize the effects of wireless channel errors on TCP performance. This paper introduces a new TCP variant, called TCP-BIAD aiming at enhancing TCP performance in broadband wireless access networks. We provide analytical expressions for evaluating the stability, throughput, fairness and friendliness properties of our proposal, and we validate our results by means of computer simulations. Initial results presented in this paper show that this approach achieves high network utilization levels in a wide range of network conditions, while maintaining an adequately fair and friendly behavior with respect to coexisting TCP flows.

This paper assesses the main challenges associated with the propagation and channel modeling of broadband radio systems in a complex environment of high speed and metropolitan railways. These challenges comprise practical simulation, modeling interferences, radio planning, test trials and performance evaluation in different railway scenarios using Long Term Evolution (LTE) as test case. This approach requires several steps; the first is the use of a radio propagation simulator based on ray-tracing techniques to accurately predict propagation. Besides the radio propagation simulator, a complete test bed has been constructed to assess LTE performance, channel propagation conditions and interference with other systems in real-world environments by means of standard-compliant LTE transmissions. Such measurement results allowed us to evaluate the propagation and performance of broadband signals and to test the suitability of LTE radio technology for complex railway scenarios.

Recently, there are many Japanese citizens living abroad in Asia, including developing countries. However, not many studies have been conducted regarding their mental health. The purpose of this study was to see what kinds of stress people experience when living abroad. Japanese workers living abroad, including some who are married to foreign nationals, and their families were asked seven questions in a survey, and they provided answers to questions in agreement with the intent and purpose of this study. Morphological analysis of the results and category classification by word class was carried out. This category was arranged by word classes. Additionally, the tendencies of responses were categorized according to the KJ method. In response to the question, “Do you have any trouble because of cultural differences?” these responses were classified according to common features. A fuzzy cluster analysis was carried out based on this information. Meaningful clusters were obtained by fuzzy cluster analysis. Differences in the values of stress and family culture can best be described by fuzzy cluster analysis.

In vehicular ad hoc networks, the efficient and reliable dissemination of emergency messages in a highly mobile environment under dense or sparse network is a significant challenge. This paper proposes a new vehicular broadcast protocol, called ACK-CAST, that can operate effectively in both dense and sparse network scenarios. ACK-CAST relies on acknowledgment messages from one-hop neighbors to select the next rebroadcasting vehicle. Simulation results show that ACK-CAST outperforms the SERVUS protocol in terms of the end-to-end delay, message delivery ratio and network overhead.

Introducing inter-satellite ranging and communication links in a Global Navigation Satellite System (GNSS) can improve its performance. In view of the highly dynamic characteristics and the rapid but reliable acquisition requirement of inter-satellite link (ISL) signal of navigation constellation, we utilize navigation data, which is the special resource of navigation satellites, to assist signal acquisition. In this paper, we introduce a method that uses the navigation data for signal acquisition from three aspects: search space, search algorithm, and detector structure. First, an iteration method to calculate the search space is presented. Then the most efficient algorithm is selected by comparing the computation complexity of different search algorithms. Finally, with the navigation data, we also propose a method to guarantee the detecting probability constant by adjusting the non-coherent times. An analysis shows that with the assistance of navigation data, we can reduce the computing cost of ISL signal acquisition significantly, as well effectively enhancing acquisition speed and stabling the detection probability.

This paper addresses a broadcast control problem of multi-agent systems with quantized measurements, where each agent moves based on the common broadcasted signal and tries to minimize a given quadratic performance index. The problem is solved by introducing dither type random movements to the agents' action which reduce the degradation caused by quantized measurements. A broadcast controller is derived and it is proven that the controller approximately achieves given tasks with probability 1. The effectiveness of the proposed controller is demonstrated by numerical simulation.

This paper proposes a vanishing point-based road detection method. Firstly, a vanishing point is detected using a texture-based method proposed in a recent study. After that, a histogram is generated for detecting two road borders. The road area is defined as the region between the two road borders and below the vanishing point. The experimental results demonstrate that our method performs well in general road images.

After the disclosure of the RC4 algorithm in 1994, a number of keystream biases of RC4 were reported, e.g., Mantin and Shamir showed that the second byte of the keystream is biased to 0, Sepehrdad et al. found that the l-th byte of the keystream is biased to -l, and Maitra et al. showed that 3rd to 255th bytes of the keystream are also biased to 0, where l is the keylength in byte. However, it is unknown that which bias is strongest in each byte of initial bytes. This paper comprehensively analyzes initial keystream biases of RC4. In particular, we introduce several new biases in the initial (1st to 257th) bytes of the RC4 keystream, which are substantially stronger than known biases. Combining the new biases with the known ones, a complete list of strongest single-byte biases in the first 257bytes of the RC4 keystream is constructed for the first time. Then, we show that our set of these biases are applicable to plaintext recovery attacks, key recovery attacks and distinguishing attacks.

This paper proposes an improved color barycenter model (CBM) and its separation for automatic road sign (RS) detection. The previous version of CBM can find out the colors of RS, but the accuracy is not high enough for separating the magenta and blue regions and the influence of number with the same color are not considered. In this paper, the improved CBM expands the barycenter distribution to cylindrical coordinate system (CCS) and takes the number of colors at each position into account for clustering. Under this distribution, the color information can be represented more clearly for analyzing. Then aim to the characteristic of barycenter distribution in CBM (CBM-BD), a constrained clustering method is presented to cluster the CBM-BD in CCS. Although the proposed clustering method looks like conventional K-means in some part, it can solve some limitations of K-means in our research. The experimental results show that the proposed method is able to detect RS with high robustness.

In this letter, we present a novel interference-aware clustering scheme for cell broadcasting service. The proposed approach is based on a genetic algorithm for re-clustering. Using the genetic algorithm, the suggested method efficiently re-clusters the user nodes when the relays fail in receiving the cell broadcasting message from the base station. The simulation results exhibit that the proposed clustering scheme can maintain much higher capacity than the conventional clustering scheme in the cases of relay outage. The re-clustering method based on genetic algorithm also shows lower complexity than the re-clustering approach based on exhaustive search.

Broadcasting is an essential function in almost all wireless networks. Because of the dynamic nature of environment, broadcasting in cognitive radio ad hoc networks is a great challenge. Cognitive radio network technology has been well studied for more than a decade as a new way to improve the spectral efficiency of wireless networks and numerous precious works have been proposed. However, very few existing works consider how to broadcast messages in cognitive radio networks that operate in multichannel environments and none of these provides a full broadcast mechanism. Therefore, in this paper, we propose a broadcasting mechanism for multichannel cognitive radio ad hoc networks. Then, we analyze the mechanism regarding the speed of message dissemination, number of transmissions, fraction of the users that receive the broadcast message and so forth.

Due to vehicle movement and lossy wireless channels, providing a reliable and efficient multi-hop broadcast service in vehicular ad hoc networks (VANETs) is a well-known challenging problem. In this paper, we propose BR-NB (broadcast with neighbor information), a fuzzy logic based multi-hop broadcast protocol for VANETs. BR-NB achieves a low overhead by using only a subset of neighbor nodes to relay data packets. For the relay node selection, BR-NB jointly considers multiple metrics of the inter-vehicle distance, vehicle mobility and link quality by employing fuzzy logic. Since the expected coverage and vehicle mobility are inferred from the two-hop neighbor information which can be acquired from the hello message exchange, BR-NB is independent of position information. BR-NB provides a practical and portable solution for broadcast services in VANETs. We use computer simulations and real-world experiments to evaluate the performance of BR-NB.

Ultra-high luminance lamps emitting white light with a well-scattered blue spectrum from InGaN/GaN laser diodes and a phosphor-converted yellow spectrum show speckle contrast values as low as LED. Spectral behavior of the laser diodes is analyzed to find the reason why such low values are obtained. As a result, the PWM-driven, multi-longitudinal mode with dynamically broadened line-width is found to have a great effect on reducing speckle contrast. Despite using the lasers, such speckle-free lamps are considered to be very suitable for high-luminance and other various lighting applications.

This paper investigates space and polarization multiplexing for multichannel transmission in a 120-GHz band wireless link system. The 120-GHz-band wireless equipment employs Cassegrain antennas with a gain of about 49dBi and cross-polar discrimination of 23dB. When each of two 120-GHz wireless links transmits a 10-Gbit/s data signal in the same direction over a distance of 800m, a bit error rate (BER) of below 10-12 is obtained when the receivers are set 30m apart. When forward error correction and polarization multiplexing are used for each wireless link, we can set two wireless links within 1m of each other and obtain a BER below 10-12. Moreover, we have experimentally shown that the rain attenuation of V- and H-polarization 120-GHz-band signal is almost the same.

In this paper, we propose a novel baseband (BB) phase shifter (PS) using a fixed-gain-amplifier (FGA) matrix. The proposed BB PS consists of 5 stages of a vector synthesis type FGA matrix with in-phase/quadrature-phase (I/Q) input/output interfaces. In order to achieve low gain variation between phase shift states, 3rd to 5th stages are designed to have a phase shift of +φi and -φi (i=3,4,5). To change between +φi and -φi phase shift states, two FGAs with DC bias in-phase/out-phase switches are used. The two FGAs have the same gain, therefore ideally no gain variation can be achieved. Using this configuration, phase shift error and gain variation caused by process mismatch and temperature variation can be reduced. Fabricated 5-bit BB PS has 3-dB bandwidth of 1.05GHz, root-mean-square (rms) phase errors lower than 2.2°, rms gain variations lower than 0.42dB. Power consumption of the PS core and output buffer are 4.9mW and 14.3mW, respectively. 1-dB compression output power is -12.5dBm. The fabricated PS shows that the total phase shift error and gain variation are within the required accuracy of a 5-bit PS with no requirement of calibration.

Variable-rate linear network codes are investigated in this paper, which are referred to as linear network codes that can support a demanded range of transmission rates on a common netowrk. A new kind of linear network code, called as strict linear broadcast, is defined. Compared with general linear broadcast, it imposes more rigid constraints on the global encoding kernels, but does not require larger finite field size for construction. Then, an efficient scheme is proposed to construct variable-rate linear broadcasts based on the strict linear broadcast. Instead of construcing a fix-rate linear broadcast for each demanded transmission rate, this scheme implements variable-rate linear broadcasts with a single-rate strict linear broadcast. Every node in the network, including the source node, needs to store only one local encoding kernel. When transmission rate varies, the coding operations performed on every network node remain unchanged. Thus, small storage space and no kernel-swithching operations are required on any network code. Furthermore, by combining the strict linear broadcast with a special source-data packetization strategy, a hierarchical broadcast scheme is proposed. With this scheme, multi-rate service can be provided by a single-rate strict linear broadcast to heterogeneous receivers, even at variable transmission rate. Thus, the variable-rate linear broadcasts constructed in this paper are also applicable to the network with heterogeneous receivers.