Here, we present a novel spectroscopic imaging method based on the boundary-extraction scheme for wide-beam terahertz (THz) three-dimensional imaging. Optical-lens-focusing systems for THz subsurface imaging generally require the depth of the object from the surface to be input beforehand to achieve the desired azimuth resolution. This limitation can be alleviated by incorporating a wide-beam THz transmitter into the synthetic aperture to automatically change the focusing depth in the post-signal processing. The range point migration (RPM) method has been demonstrated to have significant advantages in terms of imaging accuracy over the synthetic-aperture method. Moreover, in the RPM scheme, spectroscopic information can be easily associated with each scattering center. Thus, we propose an RPM-based terahertz spectroscopic imaging method. The finite-difference time-domain-based numerical analysis shows that the proposed algorithm provides accurate target boundary imaging associated with each frequency-dependent characteristic.

In this letter, we propose a novel wireless power transfer (WPT) scheme in the radiative near-field (Fresnel) region, which based on machine vision and dynamically reconfigurable holographic metasurface aperture capable of focusing power to multiple spots simultaneously without any information feedback. The states of metamaterial elements, formed by tunable meander line resonators, is determined using holographic design principles, in which the interference pattern of reference mode and the desired radiated field pattern leads to the required phase distribution over the surface of the aperture. The three-dimensional position information of mobile point sources is determined by machine visual localization, which can be used to obtain the aperture field. In contrast to the existing research studies, the proposed scheme is not only designed to achieve free multi-focuses, but also with machine vision, low-dimensionality, high transmission efficiency, real-time continuous reconfigurability and so on. The accuracy of the analysis is confirmed using numerical simulation.

We numerically investigate that optimal robust onion-like networks can emerge even with the constraint of surface growth in supposing a spatially embedded transportation or communication system. To be onion-like, moderately long links are necessary in the attachment through intermediations inspired from a social organization theory.

With the existing of coverage holes, the Quality of Service (such as event response, package delay, and the life time et al.) of a Wireless Sensor Network (WSN) may become weaker. In order to recover the holes, one can locate them by identifying the boundary nodes on their edges. Little effort has been made to distinguish the boundary nodes in a model where wireless sensors are randomly deployed on a three-dimensional surface. In this paper, we propose a distributed method which contains three steps in succession. It first projects the 1-hop neighborhood of a sensor to the plane. Then, it sorts the projected nodes according to their angles and finds out if there exists any ring formed by them. At last, the algorithm validates a circle to confirm that it is a ring surrounding the node. Our solution simulates the behavior of rotating a semicircle plate around a sensor under the guidance of its neighbors. Different from the existing results, our method transforms a three-dimensional problem into a two-dimensional one and maintaining its original topology, and it does not rely on any complex Hamiltonian Cycle finding to test the existence of a circle in the neighborhood of a sensor. Simulation results show our method outperforms others at the correctness and effectiveness in identifying the nodes on the edges of a three-dimensional WSN.

The electric properties of a field-effect transistor not only depend on gate surface sidewall but also on channel orientation when applying channel stain engineering. The change of the gate surface and channel orientation through the rotated FinFETs provides the capability to compare the orientation dependence of performance and reliability. This study characterized the <100> and <110> channels of FinFETs on the same wafer under tensile and compressive stresses by cutting the wafer into rectangular silicon pieces and evaluated their piezoresistance coefficients. The piezoresistance coefficients of the <100> and <110> silicon under tensile and compressive stresses were first evaluated based on the current setup. Tensile stresses enhance the mobilities of both <100> and <110> channels, whereas compressive stresses degrade them. Electrical characterization revealed that the threshold voltage variation and drive current degradation of the {100} surface were significantly higher than those of {110} for positive bias temperature instability and hot carrier injection with equal gate and drain voltage (VG=VD). By contrast, insignificant difference is noted for the subthreshold slope degradation. These findings imply that a higher ratio of bulk defect trapping is generated by gate voltage on the <100> surface than that on the <110> surface.

Copper (Cu) electroless plating was conducted on planar and microstructured polydimethylsiloxane (PDMS) substrates. In this study, organic thin films terminated with nitrogen (N)-containing groups, e.g. poly (dimethylaminoethyl methacrylate) brush (PDMAEMA), aminopropyl trimethoxysilane monolayer (APTES), and polydopamine (PDA) were used to anchor palladium (Pd) catalyst. While electroless plating was successfully promoted on all sample surfaces, PDMAEMA was found to achieve the best adhesion strength to the PDMS surfaces, compared to APTES- and PDA-covered PDMS substrates, due to covalent bonding, anchoring effects of polymer chains as well as high affinity of N atoms to Pd species. Our process was also successfully applied to the electroless plating of microstructured PDMS substrates.

This paper gives an overview on the design process of modulated metasurface (MTS) antennas and focus on their performance in terms of efficiency and bandwidth. The basic concept behind MTS antennas is that the MTS imposes the impedance boundary conditions (IBCs) seen by a surface wave (SW) propagating on it. The MTS having a spatially modulated equivalent impedance transforms the SW into a leaky wave with controlled amplitude, phase and polarization. MTS antennas are hence highly customizable in terms of performances by simply changing the IBCs imposed by the MTS, without affecting the overall structure. The MTS can be configured for high gain (high aperture efficiency) with moderate bandwidth, for wide bandwidth with moderate aperture efficiency, or for a trade-off performance for bandwidth and aperture efficiency. The design process herein described relies on a generalized form of the Floquet wave theorem adiabatically applied to curvilinear locally periodic IBCs. Several technological solutions can be adopted to implement the IBCs defined by the synthesis process, from sub-wavelength patches printed on a grounded slab at microwave frequencies, to a bed of nails structure for millimeter waves: in any case, the resulting device has light weight and a low profile.

Photophysical properties of water-soluble porphyrin were studied in aqueous solutions with/without DNA and in DNA solid films. Ultrathin films were prepared from aqueous DNA solutions by a spin-coating method on glass or on gold nanoparticles (AuNPs). Remarkable enhancement of phosphorescence was observed for porphyrin immobilized in DNA films spin-coated on AuNPs, which was attributed to the electric field enhancement and the increased radiative rate by localized surface plasmon resonance of AuNPs.

On surfaces of tris-(8-hydroxyquinolate) aluminum (Alq) and tris(7-propyl-8-hydroxyquinolinato) aluminum (Al7p) thin-films, positive and negative polarization charges appear, respectively, owing to spontaneous orientation of these polar molecules. Alq is a typical electron transport material where electrons are injected from cathode. Because the polarization charge exists at the Alq/cathode interface, it is likely that it affects the electron injection process because of Coulomb interaction. In order to evaluate an impact of polarization charge on electron injection from cathode, electron only devices (EODs) composed of Alq or Al7p were prepared and evaluated by displacement current measurement. We found that Alq-EOD has lower resistance than Al7p-EOD, indicating that the positive polarization charge at Alq/cathode interface enhances the electron injection due to Coulomb attraction, while the electron injection is suppressed by the negative polarization charge at the Al7p/Al interface. These results clearly suggest that it is necessary to design organic semiconductor devices by taking polarization charge into account.

In this work, we report the in situ growth of gold nanoparticles (AuNPs) for the improvement of a transmission surface plasmon resonance (T-SPR) sensor to detect human immunoglobulin G (IgG). Human IgG was immobilized on an activated self-assembled monolayer of 11-mercaptoundecanoic on a gold-coated grating substrate. The T-SPR system was also used to monitor the construction of sensor chips as well as the binding of IgG and anti-IgG conjugated with AuNPs. After specific adsorption with IgG, the T-SPR signal was further enhanced by the in situ growth of AuNPs bound with anti-IgG. Using AuNP conjugation and in situ growth of bound AuNPs, the sensitivity of the IgG immunosensor was improved by two orders of magnitude compared with that without conjugated AuNPs.

Surface light field advances conventional light field rendering techniques by utilizing geometry information. Using surface light field, real-world objects with complex appearance could be faithfully represented. This capability could play an important role in many VR/AR applications. However, an accurate geometric model is needed for surface light field sampling and processing, which limits its wide usage since many objects of interests are difficult to reconstruct with their usually very complex appearances. We propose a novel two-step optimization framework to reduce the dependency of accurate geometry. The key insight is to treat surface light field sampling as a multi-view multi-texture optimization problem. Our approach can deal with both model inaccuracy and image to model misalignment, making it possible to create high-fidelity surface light field models without using high-precision special hardware.

Dual-motor driving servo systems are widely used in many military and civil fields. Since backlash nonlinearity affects the dynamic performance and steady-state tracking accuracy of these systems, it is necessary to study a control strategy to reduce its adverse effects. We first establish the state-space model of a system. To facilitate the design of the controller, we simplify the model based on the state-space model. Then, we design an adaptive controller combining a projection algorithm with dynamic surface control applied to a dual-motor driving servo system, which we believe to be the first, and analyze its stability. Simulation results show that projection algorithm-based dynamic surface control has smaller tracking error, faster tracking speed, and better robustness and stability than mere dynamic surface control. Finally, the experimental analysis validates the effectiveness of the proposed control algorithm.

In small-aperture high frequency surface wave radar, the main-lobe clutter all can be seen as a more severe space spread clutter under the influence of the smaller array aperture. It compromises the detection performance of moving vessels, especially when the target is submerged in the clutter. To tackle this issue, an improved spread clutter estimated canceller, combining spread clutter estimated canceller, adaptive selection strategy of the optimal training samples and rotating spatial beam method, is presented to suppress main-lobe clutter in both angle domain and range domain. According to the experimental results, the proposed algorithm is shown to have far superior clutter suppression performance based on the real data.

We present a system to improve the robustness of real-time 3D surface reconstruction by utilizing non-inertial localization sensor. Benefiting from such sensor, our easy-to-build system can effectively avoid tracking drift and lost comparing with conventional dense tracking and mapping systems. To best fusing the sensor, we first adopt a hand-eye calibration and performance analysis for our setup and then propose a novel optimization framework based on adaptive criterion function to improve the robustness as well as accuracy. We apply our system to several challenging reconstruction tasks, which show significant improvement in scanning robustness and reconstruction quality.

In this study, the electromagnetic scatterings from conducting bodies have been investigated via a surface equivalence theorem. When one formulates equivalent electric and magnetic currents from geometrical optics (GO) reflected field in the illuminated surface and GO incident field in the shadowed surface, it has been found that the asymptotically derived radiation fields are found to be the same as those formulated from physical optics (PO) approximation.

A lens-integrated surface-emitting DFB laser and its application to low-cost single-mode optical sub-assemblies (OSAs) are discussed. By using the LISEL, high-efficient optical coupling with reduced number of optical components and non-hermetic packaging are demonstrated. Designing the integrated lens of LISELs makes it possible to achieve passive alignment optical coupling to an SMF without the need for an additional lens. For SiP coupling, the light-emission angle from the LISEL can be controlled by the mirror angle and by displacing the lens. The capability for a low coupling loss of 3.9 dB between the LISEL and a grating coupler on the SiP platform was demonstrated. The LISEL with facet-free structure, integrating DBR mirror, PD, and window structure on its end facet, showed the same lasing performance as the conventional laser with AR facet coating. A storage test (200-hour saturated pressure-cooker test (PCT) at 138°C and 85% RH.) showed that the lasing characteristics did not degrade with high-humidity, demonstrating the potential for applying non-hermetic packaging. Our results indicate that the LISEL is one of the promising light sources for creating cost-effective OSAs.

In this study, the effect of nitrogen-doped (N-doped) LaB6 bottom-contact electrodes and interfacial layer (IL) on n-type pentacene-based organic field-effect transistor (OFET) was investigated. The scaled OFET was fabricated by using photolithography for bottom-contact electrodes. A 20-nm-thick N-doped LaB6 bottom-contact electrodes were formed on SiO2/n+-Si(100) substrate by RF sputtering followed by the surface treatment with sulfuric acid and hydrogen peroxide mixture (SPM) followed by diluted hydrofluoric acid (DHF; 1% HF) at room temperature (RT). Then, a 1.2-nm-thick N-doped LaB6 IL was deposited at RT. Finally, a 10-nm-thick pentacene film was deposited at 100°C followed by the Al back-gate electrode formation by using thermal evaporation. The current of electron injection was observed in the air due to the effect of surface treatment and N-doped LaB6 IL.

In this study, the effect of atomically flat Si(100) surface on Hf-based Metal-Oxide-Nitride-Oxide-Silicon (MONOS) structure was investigated. After the atomically flat Si(100) surface formation by annealing at 1050/60min in Ar/4%H2 ambient, HfO2(O)/HfN1.0(N)/HfO2(O) structure with thickness of 10/3/2nm, respectively, was in-situ deposited by electron cyclotron resonance (ECR) plasma sputtering. The memory window (MW) of Al/HfO2/HfN1.0/HfO2/p-Si(100) diodes was increased from 1.0V to 2.5V by flattening of Si(100) surface. The program and erase (P/E) voltage/time were set as 10V/5s and -8V/5s, respectively. Furthermore, it was found that the gate current density after the 103P/E cycles was decreased one order of magnitude by flattening of Si(100) surface in Ar/4.0%H2 ambient.

This paper deals with the scattering of a cylindrical wave by a perfectly conductive periodic surface. This problem is equivalent to finding the Green's function G(x,z|xs,zs), where (x,z) and (xs,zs) are the observation and radiation source positions above the periodic surface, respectively. It is widely known that the Green's function satisfies the reciprocity: G(x,z|xs,zs)=G(xs,zs|x,z), where G(xs,zs|x,z) is named the reversal Green's function in this paper. So far, there is no numerical method to synthesize the Green's function with the reciprocal property in the grating theory. By combining the shadow theory, the reciprocity theorem for scattering factors and the average filter introduced previously, this paper gives a new numerical method to synthesize the Green's function with reciprocal property. The reciprocity means that any properties of the Green's function can be obtained from the reversal Green's function. Taking this fact, this paper obtains several new formulae on the radiation and scattering from the reversal Green's function, such as a spectral representation of the Green's function, an asymptotic expression of the Green's function in the far region, the angular distribution of radiation power, the total power of radiation and the relative error of power balance. These formulae are simple and easy to use. Numerical examples are given for a very rough periodic surface. Several properties of the radiation and scattering are calculated for a transverse magnetic (TM) case and illustrated in figures.

This paper newly proposes a fast computation technique on the method of image Green's function for p-characteristic calculations, when a plane wave with the transverse wavenumber p is incident on a periodic rough surface having perfect conductivity. In the computation of p-characteristics, based on a spectral domain periodicity of the periodic image Green's function, the image integral equation for a given incidence p maintains the same form for other particular incidences except for the excitation term. By means of a quadrature method, such image integral equations lead to matrix equations. Once the first given matrix equation is performed by a solution procedure as calculations of its matrix elements and its inverse matrix, the other matrix equations for other particular incidences no longer need such a solution procedure. Thus, the total CPU time for the computation of p-characteristics is largely reduced in complex shaped surface cases, huge roughness cases or large period cases.