In recent years, location-based technologies for ubiquitous environments have aimed to realize services tailored to each purpose based on information about an individual's current location. To establish such advanced location-based services, an estimation technology that can accurately recognize and predict the movements of people and objects is necessary. Although global positioning system (GPS) has already been used as a standard for outdoor positioning technology and many services have been realized, several techniques using conventional wireless sensors such as Wi-Fi, RFID, and Bluetooth have been considered for indoor positioning technology. However, conventional wireless indoor positioning is prone to the effects of noise, and the large range of estimated indoor locations makes it difficult to identify human activities precisely. We propose a method to mine user activity patterns from time-series data of user's locationss in an indoor environment using ultra-wideband (UWB) sensors. An UWB sensor is useful for indoor positioning due to its high noise immunity and measurement accuracy, however, to our knowledge, estimation and prediction of human indoor activities using UWB sensors have not yet been addressed. The proposed method consists of three steps: 1) obtaining time-series data of the user's location using a UWB sensor attached to the user, and then estimating the areas where the user has stayed; 2) associating each area of the user's stay with a nearby landmark of activity and assigning indoor activities; and 3) mining the user's activity patterns based on the user's indoor activities and their transitions. We conducted experiments to evaluate the proposed method by investigating the accuracy of estimating the user's area of stay using a UWB sensor and observing the results of activity pattern mining applied to actual laboratory members over 30-days. The results showed that the proposed method is superior to a comparison method, Time-based clustering algorithm, in estimating the stay areas precisely, and that it is possible to reveal the user's activity patterns appropriately in the actual environment.

Aiming at the problem of “energy hole” caused by random distribution of nodes in large-scale wireless sensor networks (WSNs), this paper proposes an adaptive energy-efficient balanced uneven clustering routing protocol (AEBUC) for WSNs. The competition radius is adaptively adjusted based on the node density and the distance from candidate cluster head (CH) to base station (BS) to achieve scale-controlled adaptive optimal clustering; in candidate CHs, the energy relative density and candidate CH relative density are comprehensively considered to achieve dynamic CH selection. In the inter-cluster communication, based on the principle of energy balance, the relay communication cost function is established and combined with the minimum spanning tree method to realize the optimized inter-cluster multi-hop routing, forming an efficient communication routing tree. The experimental results show that the protocol effectively saves network energy, significantly extends network lifetime, and better solves the “energy hole” problem.

Recent studies have shown that concurrent transmission with precise time synchronization enables reliable and efficient flooding for wireless networks. However, most of them require all nodes in the network to forward packets a fixed number of times to reach the destination, which leads to unnecessary energy consumption in both one-to-one and many-to-one communication scenarios. In this letter, we propose G1M address this issue by reducing redundant packet forwarding in concurrent transmissions. The evaluation of G1M shows that compared with LWB, the average energy consumption of one-to-one and many-to-one transmission is reduced by 37.89% and 25%, respectively.

Nowadays, in various wireless sensor networks, both aperiodically generated packets like event detections and periodically generated ones for environmental, machinery, vital monitoring, etc. are transferred. Thus, packet loss caused by collision should be suppressed among aperiodic and periodic packets. In addition, some packets for wireless applications such as factory IoT must be transferred within permissible end-to-end delays, in addition to improving packet loss. In this paper, we propose transmission timing control of both aperiodic and periodic packets at an upper layer of medium access control (MAC). First, to suppress packet loss caused by collision, transmission timings of aperiodic and periodic packets are distributed on the time axis. Then, transmission timings of delay-bounded packets with permissible delays are assigned within the bounded periods so that transfer within their permissible delays is possible to maximally satisfy their permissible delays. Such control at an upper layer has advantages of no modification to the MAC layer standardized by IEEE 802.11, 802.15.4, etc. and low sensor node cost, whereas existing approaches at the MAC layer rely on MAC modifications and time synchronization among all sensor nodes. Performance evaluation verifies that the proposed transmission timing control improves packet loss rate regardless of the presence or absence of packet's periodicity and permissible delay, and restricts average transfer delay of delay-bounded packets within their permissible delays comparably to a greedy approach that transmits delay-bounded packets to the MAC layer immediately when they are generated at an upper layer.

In wireless sensor networks (WSNs), wireless power transfer (WPT) has been studied as an energy-harvesting technique for prolonging their network lifetime. The WPT can supply power resources to sensor nodes (SNs) wirelessly, however, the reception (harvesting) power at SNs depends on their distance from a WPT equipment (WPTE), leading to the location-dependent non-uniformity in the reception power among SNs. For the fixed-located WPTE, SNs distant from the WPTE suffer from insufficient reception power. To handle this problem, this paper proposes a novel network structure introducing multiple hybrid access points (HAPs), which equip two functions of conventional cluster head function, including data collection and relay transmission, and WPT function. Then, these HAPs take terms providing both functions. By periodically rotating the HAP providing the WPT function, the location of the WPTE can be changed, which reduces the non-uniformity in the SN reception power. Also, this paper proposes a clustering scheme based on the residual power at SNs to reduce their power depletion under the proposed network structure. The evaluation results through computer simulation show that the proposed system reduces the non-uniformity in the SN reception power and the power depletion at the SNs and then improves the data collection rate, compared with the conventional systems.

Wireless sensor networks provide long-term monitoring of the environment, but sensors are powered by small batteries. Using a mobile charger (MC) to replenish energy of sensors is one promising solution to prolong their usage time. Many approaches have been developed to find the MC's moving path, and they assume that sensors have a fixed sensing rate (SR) and prefer to fully charge sensors. In practice, sensors can adaptively adjust their SRs to meet application demands or save energy. Besides, due to the fully charging policy, some sensors with low energy may take long to wait for the MC's service. Thus, the paper formulates a path and charge (P&C) problem, which asks how to dispatch the MC to visit sensors with adaptive SRs and decide their charging time, such that both survivability and throughput of sensors can be maximized. Then, we propose an efficient P&C scheduling (EPCS) algorithm, which builds the shortest path to visit each sensor. To make the MC fast move to charge the sensors near death, some sensors with enough energy are excluded from the path. Moreover, EPCS adopts a floating charging mechanism based on the ratio of workable sensors and their energy depletion. Simulation results verify that EPCS can significantly improve the survivability and throughput of sensors.

Energy efficiency is one of the critical issues for Wireless Sensor Networks (WSN). IEEE 802.15.4 beacon-enabled MAC protocol achieves low energy consumption by having periodical inactive portions, where nodes run in low power. However, IEEE 802.15.4 beacon-enabled protocol cannot respond to dynamic changes in the number of sensor nodes and data rates in WSN because its duty cycle is fixed and immutable. In this paper, we propose a dynamic superframe duration adaptation scheme based on the Markov chain-based analysis methods for IEEE 802.15.4 beacon-enabled protocol. The proposed methods are flexible enough to accommodate changes in the number of sensor nodes and differences in data rates in WSNs while maintaining low latency and low energy consumption despite slight degradation in packet delivery ratio.

As an emerging technology, device-free localization (DFL) using wireless sensor networks to detect targets not carrying any electronic devices, has spawned extensive applications, such as security safeguards and smart homes or hospitals. Previous studies formulate DFL as a classification problem, but there are still some challenges in terms of accuracy and robustness. In this paper, we exploit a generalized thresholding algorithm with parameter p as a penalty function to solve inverse problems with sparsity constraints for DFL. The function applies less bias to the large coefficients and penalizes small coefficients by reducing the value of p. By taking the distinctive capability of the p thresholding function to measure sparsity, the proposed approach can achieve accurate and robust localization performance in challenging environments. Extensive experiments show that the algorithm outperforms current alternatives.

This study proposes a design method for a rectifier circuit that can be rapidly charged by focusing on the design-load value of the circuit and the load fluctuation of a storage capacitor. The design-load value is suitable for rapidly charging the capacitor. It can be obtained at the lowest reflection condition and estimated according to the circuit design. This is a conventional method for designing the rectifier circuit using the optimum load. First, we designed rectifier circuits for the following three cases. The first circuit design uses a load set to 10 kΩ. The second design uses a load of 30 kΩ that is larger than the optimum load. The third design utilizes a load of 3 kΩ. Then, we measure the charging time to design the capacitor on each circuit. Consequently, the results show that the charge time could be shortened by employing the design-load value lower than that used in the conventional design. Finally, we discuss herein whether this design method can be applied regardless of the rectifier circuit topology.

In this paper, the effective Long Range (LoRa) based wireless sensor network is designed and implemented to provide the remote data sensing functions for the planned smart agricultural recycling rapid processing factory. The proposed wireless sensor network transmits the sensing data from various sensors, which measure the values of moisture, viscosity, pH, and electrical conductivity of agricultural organic wastes for the production and circulation of organic fertilizers. In the proposed wireless sensor network design, the LoRa transceiver module is used to provide data transmission functions at the sensor node, and the embedded platform by Raspberry Pi module is applied to support the gateway function. To design the cloud data server, the MySQL methodology is applied for the database management system with Apache software. The proposed wireless sensor network for data communication between the sensor node and the gateway supports a simple one-way data transmission scheme and three half-duplex two-way data communication schemes. By experiments, for the one-way data transmission scheme under the condition of sending one packet data every five seconds, the packet data loss rate approaches 0% when 1000 packet data is transmitted. For the proposed two-way data communication schemes, under the condition of sending one packet data every thirty seconds, the average packet data loss rates without and with the data-received confirmation at the gateway side can be 3.7% and 0%, respectively.

In this paper, we advocate applying the concept of content-based wake-up to distributed estimation in wireless sensor networks employing wake-up receivers. With distributed estimation, where sensing data of multiple nodes are used for estimating a target observation, the energy consumption can be reduced by ensuring that only a subset of nodes in the network transmit their data, such that the collected data can guarantee the required estimation accuracy. In this case, a sink needs to selectively wake up those sensor nodes whose data can contribute to the improvement of estimation accuracy. In this paper, we propose wake-up signaling called estimative sampling (ES) that can selectively activate the desired nodes by using content-based wake-up control. The ES method includes a mechanism that dynamically searches for the desired nodes over a distribution of sensing data. With numerical results obtained by computer simulations, we show that the distributed estimation with ES method achieves lower energy consumption than conventional identity-based wake-up while satisfying the required accuracy. We also show that the proposed dynamic mechanism finely controls the trade-off between delay and energy consumption to complete the distributed estimation.

To tackle the distributed power optimization problems in wireless sensor networks localization systems, we model the problem as a hierarchical game, i.e. a multi-leader multi-follower Stackelberg game. Existing researches focus on the power allocation of anchor nodes for ranging signals or the power management of agent nodes for cooperative localization, individually. However, the power optimizations for different nodes are indiscerptible due to the common objective of localization accuracy. So it is a new challenging task when the power allocation strategies are considered for anchor and agent nodes simultaneously. To cope with this problem, a hierarchical game is proposed where anchor nodes are modeled as leaders and agent nodes are modeled as followers. Then, we prove that games of leaders and followers are both potential games, which guarantees the Nash equilibrium (NE) of each game. Moreover, the existence of Stackelberg equilibrium (SE) is proved and achieved by the best response dynamics. Simulation results demonstrate that the proposed algorithm can have better localization accuracy compared with the decomposed algorithm and uniform strategy.

In the statistic en-route filtering, each report generation node must collect a certain number of endorsements from its neighboring nodes. However, at some point, a node may fail to collect an insufficient number of endorsements since some of its neighboring nodes may have dead batteries. This letter presents a report generation method that can enhance the generation process of sensing reports under such a situation. Simulation results show the effectiveness of the proposed method.

Mobile wireless sensor networks (WSNs) are facing threats from malicious nodes that disturb packet transmissions, leading to poor mobile WSN performance. Existing studies have proposed a number of methods, such as decision tree-based classification methods and reputation based methods, to detect these malicious nodes. These methods assume that the malicious nodes follow only pre-defined attack models and have no learning ability. However, this underestimation of the capability of malicious node is inappropriate due to recent rapid progresses in machine learning technologies. In this study, we design reinforcement learning-based malicious nodes, and define a novel observation space and sparse reward function for the reinforcement learning. We also design an adaptive learning method to detect these smart malicious nodes. We construct a robust classifier, which is frequently updated, to detect these smart malicious nodes. Extensive experiments show that, in contrast to existing attack models, the developed malicious nodes can degrade network performance without being detected. We also investigate the performance of our detection method, and confirm that the method significantly outperforms the state-of-the-art methods in terms of detection accuracy and false detection rate.

To solve the problem of the self-deployment of heterogeneous directional wireless sensor networks in 3D space, this paper proposes a weighted Voronoi diagram-based self-deployment algorithm (3DV-HDDA) in 3D space. To improve the network coverage ratio of the monitoring area, the 3DV-HDDA algorithm uses the weighted Voronoi diagram to move the sensor nodes and introduces virtual boundary torque to rotate the sensor nodes, so that the sensor nodes can reach the optimal position. This work also includes an improvement algorithm (3DV-HDDA-I) based on the positions of the centralized sensor nodes. The difference between the 3DV-HDDA and the 3DV-HDDA-I algorithms is that in the latter the movement of the node is determined by both the weighted Voronoi graph and virtual force. Simulations show that compared to the virtual force algorithm and the unweighted Voronoi graph-based algorithm, the 3DV-HDDA and 3DV-HDDA-I algorithms effectively improve the network coverage ratio of the monitoring area. Compared to the virtual force algorithm, the 3DV-HDDA algorithm increases the coverage from 75.93% to 91.46% while the 3DV-HDDA-I algorithm increases coverage from 76.27% to 91.31%. When compared to the unweighted Voronoi graph-based algorithm, the 3DV-HDDA algorithm improves the coverage from 80.19% to 91.46% while the 3DV-HDDA-I algorithm improves the coverage from 72.25% to 91.31%. Further, the energy consumption of the proposed algorithms after 60 iterations is smaller than the energy consumption using a virtual force algorithm. Experimental results demonstrate the accuracy and effectiveness of the 3DV-HDDA and the 3DV-HDDA-I algorithms.

End-to-end delay, aiming to realize how much time it will take for a traffic load generated by a Mobile Node (MN) to reach Sink Node (SN), is a principal objective of most new trends in a Wireless Sensor Network (WSN). It has a direct link towards understanding the minimum time delay expected where the packet sent by MN can take to be received by SN. Most importantly, knowing the average minimum transmission time limit is a crucial piece of information in determining the future output of the network and the kind of technologies implemented. In this paper, we take network load and transmission delay issues into account in estimating the Average Minimum Time Limit (AMTL) needed for a health operating cognitive WSN. To further estimate the AMTL based on network load, an end-to-end delay analysis mechanism is presented and considers the total delay (service, queue, ACK, and MAC). This work is proposed to answer the AMTL needed before implementing any cognitive based WSN algorithms. Various time intervals and cogitative channel usage with different application payload are used for the result analysis. Through extensive simulations, our mechanism is able to identify the average time intervals needed depending on the load and MN broadcast interval in any cognitive WSN.

Distributing codes to specific target sensors in order to fix bugs and/or install a new application is an important management task in WSNs (Wireless Sensor Networks). For the energy efficient dissemination of such codes to specific target sensors, it is required to select the minimum required number of forwarders with the fewest control messages. In this paper, we propose a novel RPL (Routing Protocol for Low-power and lossy networks)-based tree construction scheme for target-specific code dissemination, which is called R-TCS. The main idea of R-TCS is that by leveraging the data collection tree created by a standard routing protocol RPL, it is possible to construct the code dissemination tree with the minimum numbers of non-target sensors and control messages. Since by creating a data collection tree each sensor exchanges RPL messages with the root of the tree, every sensor knows which sensors compose its upwards route, i.e. the route towards the root, and downwards route, i.e. the route towards the leaves. Because of these properties, a target sensor can select the upward route that contains the minimum number of non-target sensors. In addition, a sensor whose downward routes do not contain a target sensor is not required to transmit redundant control messages which are related to the code dissemination operation. In this way, R-TCS can reduce the energy consumption which typically happens in other target-specific code dissemination schemes by the transmission of control messages. In fact, various performance evaluation results obtained by means of computer simulations show that R-TCS reduces by at least 50% energy consumption as compared to the other previous known target-specific code dissemination scheme under the condition where ratio of target sensors is 10% of all sensors.

In wireless multi-hop networks such as ad hoc networks and sensor networks, backoff-based opportunistic routing protocols, which make a forwarding decision based on backoff time, have been proposed. In the protocols, each potential forwarder calculates the backoff time based on the product of a weight and global scaling factor. The weight prioritizes potential forwarders and is calculated based on hop counts to the destination of a sender and receiver. The global scaling factor is a predetermined value to map the weight to the actual backoff time. However, there are three common issues derived from the global scaling factor. First, it is necessary to share the predetermined global scaling factor with a centralized manner among all terminals properly for the backoff time calculation. Second, it is almost impossible to change the global scaling factor during the networks are being used. Third, it is difficult to set the global scaling factor to an appropriate value since the value differs among each local surrounding of forwarders. To address the aforementioned issues, this paper proposes a novel decentralized local scaling factor control without relying on a predetermined global scaling factor. The proposed method consists of the following three mechanisms: (1) sender-centric local scaling factor setting mechanism in a decentralized manner instead of the global scaling factor, (2) adaptive scaling factor control mechanism which adapts the local scaling factor to each local surrounding of forwarders, and (3) mitigation mechanism for excessive local scaling factor increases for the local scaling factor convergence. Finally, this paper evaluates the backoff-based opportunistic routing protocol with and without the proposed method using computer simulations.

We propose a distributed blind equalization method for wireless sensor networks, in which a source sends data and each node performs time-domain equalization to estimate the data from a received signal that is affected by inter-symbol interference. The equalization can be performed distributively based on the mutually referenced equalization principle. Even if the nodes in the network are not fully connected to each other, the average consensus technique enables us to perform the equalization of all channels.

The flexibility of wireless communication makes it more and more widely used in industrial scenarios. To satisfy the strict real-time requirements of industry, various wireless methods especially based on the time division multiple access protocol have been introduced. In this work, we first conduct a mathematical analysis of the network model and the problem of minimum packet loss. Then, an optimal Real-time Scheduling algorithm based on Backtracking method (RSBT) for industrial wireless sensor networks is proposed; this yields a scheduling scheme that can achieve the lowest network packet loss rate. We also propose a suboptimal Real-time Scheduling algorithm based on Urgency and Concurrency (RSUC). Simulation results show that the proposed algorithms effectively reduce the rate of the network packet loss and the average response time of data flows. The real-time performance of the RSUC algorithm is close to optimal, which confirms the computation efficiency of the algorithm.