We proposed and demonstrated a novel wavelength stabilization technique for dense wavelength division multiplexing (DWDM) systems using dithering-induced AM cancellation which improves both wavelength stability and data transmission performance. Our wavelength stabilization technique consists of an optical frequency discriminating function and a function for canceling AM components induced by frequency dithering of the light source. The frequency discrimination in this technique is based on an FM-AM conversion effect, obtained by interaction from frequency dithering of the light with the bandpass characteristic of an arrayed-waveguide grating (AWG) multiplexer. The AM cancellation function was added to suppress optical frequency discriminating errors occurring due to AM components induced by frequency dithering in this wavelength stabilization architecture. In this scheme, an electro-absorption (EA) modulator is employed not only for modulating high-speed data traffic but also for suppressing AM components induced by frequency dithering on the light signal. Since the EA modulator is usually used for modulating high-speed data traffic, dedicated optical devices are not required for suppressing the AM components. The wavelength stability of a light source can therefore be enhanced with simple architecture. In the demonstration, a reduction of fluctuations within 50 MHz versus changes in the modulation index, and long-term stability within 320 MHz after more than 60 hours was achieved in 10 Gbit/s NRZ transmission. We also confirmed that the proposed AM cancellation technique effectively reduces the transmission penalties due to frequency dithering in 10 Gbit/s NRZ data transmission performance.

Three dimensional model based coding methods are proposed as next generation image coding methods. These new representations need 3D reconstruction techniques. This paper presents a method that extracts the surfaces of static objects that occlude other objects from a spatiotemporal image captured with straight-line camera motion. We propose the concept of occlusion types and show that the occlusion types are restricted to only eight patterns. Furthermore, we show occlusion type pairs contain information that confirms the existence of surfaces. Occlusion information gives strong cues for segmentation and representation. The method can estimate not only the 3D positions of edge points but also the surfaces bounded by the edge points. We show that combinations of occlusion types contain information that can confirm surface existence. The method was tested successfully on real images by reconstructing flat and curved surfaces. Videos can be hierarchically structured with the method. The method makes various applications possible, such as object selective image communication and object selective video editing.

Generalized Multi-protocol Label Switching (GMPLS) technologies are expected a key technology that creates high-performance Internet backbone networks. There were many GMPLS interoperability trials. However, most of them reported the successful results only. How to set up a trial network and how to test it was generally not discussed. In this paper, as a kind of tutorial, detailed GMPLS field trials in the National Institute of Information and Communications Technology (NICT) Kei-han-na Info-Communication Open Laboratory, Interoperability Working Group (WG) are reported. The interoperability WG is aiming at the leading edge GMPLS protocol based Inter-Carrier Interface that utilizes wide-bandwidth, cost-effective photonic technology to implement IP-centric managed networks. The interoperability WG is a consortium for researching the GMPLS protocol and advancing a de facto standard in this area. Its experimental results, new ideas, and protocols are submitted to standardization bodies such as the International Telecommunications Union-Telecommunication standardization sector (ITU-T), the Internet Engineering Task Force (IETF), and the Optical Internetworking Forum (OIF). This paper introduces the activities of the interoperability WG; they include a nationwide GMPLS field trial using the JGN II network with multi-vendor, multi-switching-capable equipment and a GMPLS multi routing area trial that used a multi-vendor lambda-switching-capable network.

This paper describes the circuit design and measurement results of a new GaAs-HBT RF power detector proposed for use in WiMAX and wireless LAN transmitter applications. The detector, which is based on a simple current-mirror topology, occupies a small die area. It is, therefore, not only easy to implement together with a GaAs-HBT power amplifier, but can also offer approximately logarithmic (linear-in-dB) characteristics. Because it can also be driven with small voltage amplitudes, it is suitable for base-terminal monitoring at an HBT power stage. When the detector is used as a base-terminal power monitor, an appropriate base resistance added to the detection HBT effectively suppresses frequency dispersion of the detected voltage characteristics. Measurements of a prototype detector incorporated into a single-stage HBT power amplifier fabricated on the same die are as follows. The detector is capable of delivering a detected voltage of 0.35-2.5 V with a slope of less than 0.17 V/dB over a 4-to-24-dBm output power range at 3.5 GHz while drawing a current of less than 1.8 mA from a 2.85-V supply. While satisfying a log conformance error of less than 1 dB over an amplifier output power range from 4 dBm to 24 dBm, it can also suppress the detected power dispersion within 0.18 dB at approximately 15 dBm of output power over a 3.1-3.9-GHz-wide frequency range. This dispersion value is approximately one-tenth that of a conventional collector-terminal-monitor-type diode detector.

This paper describes a 3.5 V operation InGaP HBT MMIC power amplifier module for use in GSM/EDGE dual-mode, 900/1800/1900 MHz triple band handset applications. Conventional GSM amplifiers have a high linear gain of 40 dB or more to realize efficiency operation in large gain compression state exceeding at least 5 dB. On the other hand, an EDGE amplifier needs a linear operation to prevent signal distortion. This means that a high linear gain amplifier cannot be applied to the EDGE amplifier, because the high gain leads to the high noise power in the receive band (Rx-noise). In order to solve this problem, we have changed the linear gain of the amplifier between GSM and EDGE mode. In EDGE mode, the stage number of the amplifier changes from three to two. To reduce a high gain, the first stage transistors in the amplifier is bypassed through the diode switches. This newly proposed bypass circuit enables a high gain in GSM mode and a low gain in EDGE, thus allowing the amplifier to operate with high efficiency in both modes while satisfying the Rx-noise specification. In conclusion, with diode switches and a band select switch built on the MMIC, the module delivers a Pout of 35.5 dBm and a PAE of about 50% for GSM900, a 33.4 dBm Pout and a 45% PAE for GSM1800/1900. While satisfying an error vector magnitude (EVM) of less than 4% and a receive-band noise power of less than -85 dBm/100 kHz, the module also delivers a 29.5 dBm Pout and a PAE of over 25% for EDGE900, a 28.5 dBm Pout and a PAE of over 25% for EDGE1800/1900.

This paper describes circuit design and measurement results of a newly proposed GaAs-HBT step-gain amplifier configuration and its application to a 3.3-3.6 GHz WiMAX power amplifier module for use in customer premises equipment. The step-gain amplifier implemented using only a usual HBT process is based on a current-mirror-based, base-collector diode switches and a passive attenuator core for the purpose of bypassing a power-gain stage. The stage allows an individual design approach in terms of gain and attenuation levels as well as large operating current reduction in the attenuation state. To confirm the effectiveness of the proposed step-gain amplifier, a prototype of the amplifier was designed and fabricated, and then a WiMAX power amplifier module was also designed and fabricated as an application example of the proposed configuration to an amplifier product. Measurements are as follows. For a 3.5-V power supply and a 3.5-GHz non-modulated signal, the step-gain amplifier delivers 23.7 dBm of 1-dB gain compressed output power and 10.7 dB of linear gain in the amplification state. In the attenuation state, the amplifier exhibits 21 dBm of 1-dB gain expanded input power, -9.7 dB of gain, and 15 mA of current dissipation while keeping the gain stage switched off and maintaining input and output return loss of less than -10 dB at a 3.5-GHz band. The WiMAX amplifier operating with a 5-V supply voltage and a 64-QAM modulated signal is capable of delivering a 28.5-dBm linear output power, a 37-39 dB gain, and 15% of PAE over a wide frequency range from 3.3 to 3.6 GHz in the high-gain state while keeping error vector magnitude as low as 2.5%. This amplifier, which incorporates the proposed step-gain configuration into its interstage, enables a 24-dB gain reduction and a 45-mA large quiescent current reduction in the low-gain state.

The dynamic spectral broadening factor of an InGaAsP/InP electroabsorption light modulator has been characterized from optical power spectra under large-signal sinusoidal modulation. The value decreased with increasing an operating electric field in the modulator. The estimated value for full modulation was 2.3.

Implementation issues on generalized multi-protocol label switching (GMPLS) -based photonic switching networks are experimentally analyzed. A resilient control plane architecture using in-fiber and out-of-fiber control channels is proposed to resolve issues of establishing the control plane in out-of-band networks. The resilient control plane is demonstrated in a photonic cross-connect (PXC) -based GMPLS network involving a 1,000 km transmission line. Fast signaling for provisioning and restoration operation is accomplished by implementing in-fiber control channels as primary, and the out-of-fiber control channels effectively operate as secondary and restore messaging of the control information between neighbors. The control channel protection is initiated by the link management protocol (LMP). Using the test bed, optical layer routing operation is investigated to assess the effects on the signal quality of wavelength paths, and transparent routing of the wavelength paths over one-hop and two-hops route is demonstrated within 1 dB difference regarding the Q factor. Stable operation of loss of light (LOL) -triggered restoration is demonstrated by setting the optical level threshold 5 dB higher than the amplified spontaneous emission (ASE) noise level.

This paper addresses the task of assigning labels of fine-grained named entity (NE) types to Wikipedia articles. Information of NE types are useful when extracting knowledge of NEs from natural language text. It is common to apply an approach based on supervised machine learning to named entity classification. However, in a setting of classifying into fine-grained types, one big challenge is how to alleviate the data sparseness problem since one may obtain far fewer instances for each fine-grained types. To address this problem, we propose two methods. First, we introduce a multi-task learning framework, in which NE type classifiers are all jointly trained with a neural network. The neural network has a hidden layer, where we expect that effective combinations of input features are learned across different NE types. Second, we propose to extend the input feature set by exploiting the hyperlink structure of Wikipedia. While most of previous studies are focusing on engineering features from the articles' contents, we observe that the information of the contexts the article is mentioned can also be a useful clue for NE type classification. Concretely, we propose to learn article vectors (i.e. entity embeddings) from Wikipedia's hyperlink structure using a Skip-gram model. Then we incorporate the learned article vectors into the input feature set for NE type classification. To conduct large-scale practical experiments, we created a new dataset containing over 22,000 manually labeled articles. With the dataset, we empirically show that both of our ideas gained their own statistically significant improvement separately in classification accuracy. Moreover, we show that our proposed methods are particularly effective in labeling infrequent NE types. We've made the learned article vectors publicly available. The labeled dataset is available if one contacts the authors.

At present, the global Internet consists of many ASes. Each AS pays a pre-determined connection fee to another AS for connecting its network with that AS's network. The connection fee type charging may be rational in case of transferring the best-effort type traffic. However, usage charging is necessary to transferring the resource guaranteed type traffic such as the Intserv traffic and the Diffserv traffic. In this case, each AS pays a per-flow fee to another AS every time it routes a flow into another AS. The per-flow fee paid by each AS becomes a part of the cost for that AS. Thus, each AS needs to select a route with the lowest price to improve its own profit. In this paper, we call such an inter-AS routing scheme a price-based inter-AS routing scheme. When each AS has a request to route an inter-AS flow, it can select an inter-AS route with the lowest price to improve its own profit by this routing scheme. Cost-dependent pricing scheme is suitable for the price-based inter-AS routing scheme because it can reduce frequency of price information exchange between ASes. However, in the cost-dependent pricing scheme, profit in each AS depends on the distribution of path costs in that AS. Generally, ASes with narrow ranges of path costs cannot obtain sufficient profits compared to ASes with wide ranges of path costs. Thus, we propose a routing policy for ASes with narrow ranges of path costs to improve their profits efficiently and evaluate its effect using a simple routing model.

This paper proposes a new method that can robustly recover 3D structure and 3D motion of 3D moving objects from a few multi-views. It recovers 3D feature points by obtaining intersections of back-projection lines which are connected from the camera's optical centers thorough projected feature points on the image planes corresponding to the different cameras. We show that our method needs only six views to suppress false 3D feature points in most cases by discussing the relation between the occurrence probability of false 3D feature points and the number of views. This discussion gives us a criterion to design the optimal multi-camera system for recovering 3D structure and 3D motion of 3D moving objects. An experimental multi-camera system is constructed to confirm the validity of our method. This system can take images from six different views at once and record motion image sequence from each view over a period of a few seconds. It is tested successfully on recovering the 3D structure of Vinus's plaster head and on recovering the 3D structure and 3D motion of a moving hand.

A 100 W, low distortion AlGaAs/GaAs heterostructure FET has been developed for CDMA cellular base stations. This FET employs the longest gate finger ever reported of 800 µm to shrink the chip size. The size of the chip and the package are miniaturized to 1.242.6 mm2 and 17.4 24.0 mm2, respectively. The developed FET exhibits 100 W (50 dBm) saturation output power, and 11.5 dB power gain at 1 dB gain compression at 2.1 GHz. The third-order intermodulation distortion and the power-added efficiency under the two-tone test condition (Δf=1 MHz) are -35 dBc and 24%, respectively at 42 dBm output power, that is 8 dB back off from the saturation power.

Progress in WDM transmission technology and the development of optical cross-connect systems has made optical backbone networks a reality. The conventional planning methodologies for such optical backbone networks calculate optimum light-path arrangements to minimize the network cost under the condition that the number of demanded light-paths is given in advance. However, the light-path demand varies according to the light-path prices. Thus, a new planning methodology for the optical backbone networks is necessary to optimize the light-path prices and to maximize the profit obtained from the network. This paper proposes a new planning methodology for the survivable optical networks. This methodology is based on economic theory for competitive markets involving plural kinds of commodities. Using this methodology, the optimum light-path prices can be decided to maximize the obtained profit. A numerical example is presented to show that the obtained profit can be improved by preparing various light-path classes with different recovery modes and introducing an appropriate light-path pricing according to the reliability of each light-path class.

Feasibility of 20 Gbit/s single channel transoceanic soliton transmission systems with a simple EDFA repeaters configuration has been studied. Both a simple and versatile soliton pulse generator and a polarization insensitive optical demultiplexer, which can provide a almost square shape optical gate with duration of full bit time period, have been proposed and demonstrated by using sinusoidally modulated electroabsorption modulators. The optical time-division multiplexing/demultiplexing scheme using the optical demultiplexer results in drastic improvement of bit error rate characteristics. We have experimentally confirmed that the use of alternating-amplitude solitons is an efficient way to mitigate not only soliton-soliton interaction but also Gordon-Haus timing jitter constraints in multi-ten Gbit/s soliton transmission. Timing jitter reduction using relatively wide band optical filter bas been investigated in 20 Gbit/s loop experiments and single-carrier, single-polarization 20 Gbit/s soliton data transmission over 11500 km with bit error rate of below 10-9 has been experimentally demonstrated, using the modulator-based soliton source, the optical demultiplexer, the alternation-amplitude solitons, and wide-band optical filters. Obtained 230 Tbit/skm transmission capacity shows the feasibility of 20 Gbit/s single channel soliton transoceanic systems using fully practical technologies.

Integration of the IP/MPLS network and the WDM optical mesh network is a promising approach to realizing an efficient backbone network. Because of the great volumes of traffic carried, the social cost incurred by a failure will be extremely high, so survivability is very important in the backbone network. In survivable IP/MPLS over WDM backbone networks, cooperation of the optical level fault recovery and the IP/MPLS level fault recovery is essential. This paper analyzes cost characteristics of the optical level fault recovery and the IP/MPLS level fault recovery. A mathematical programming method is proposed to minimize the initial network cost when the IP/MPLS level fault recovery is utilized in the survivable IP/MPLS over WDM networks. Using this method, the initial network cost needed for the IP/MPLS level fault recovery is compared with that for the optical level fault recovery. The initial network cost for the LSP (Label Switched Path) protection scheme is smaller than that for the shared light-path protection scheme and larger than that for the pre-plan type light-path restoration scheme. The LSP protection scheme is suitable for the best-effort type traffic while the shared light-path protection scheme may be suitable for the bandwidth guaranteed type traffic.

We have proposed and demonstrated a novel optical regenerator architecture employing electroabsorption modulators as wavelength converters. The employment of EA modulators is advantageous for high-speed operation and flexibility in the bit-rate for the pulse regeneration. In addition, the EA modulator-wavelength-converter acts also as a photo diode for clock extraction. Compensation of the optical SNR and Q-factor has been demonstrated, even in cascaded noise load. Furthermore, against dispersion loading, we have confirmed that waveform recovery and Q-factor improvement is obtained by midway insertion of the optical regenerator. The proposed architecture will offer a wide-band-electronics-free optical regenerator in multi-tens of gigabit per second WDM networks.

This paper describes, for the first time, an experimental study on the layout design considerations of GaAs HBT MMIC switchable-amplifier-chain-based power amplifiers (SWPAs) for CDMA handsets. The transient response of the quiescent current and output power (Pout) in GaAs HBT power amplifiers that consist of a main chain and a sub-chain is often affected by a thermal coupling between power stages and their bias circuits in the same chain or a thermal coupling between power stages and/or their bias circuits in different chains. In particular, excessively strong thermal coupling inside the MMIC SWPA causes failure in 3GPP-compliant inner loop power control tests. An experimental study reveals that both the preheating in the main/sub-chains and appropriate thermal coupling inside the main chain are very effective in reducing the turn-on delay for the two-parallel-amplifier-chain topology; for example, i) the sub-power stage is arranged near the main power stage, ii) the sub-driver stage is placed near the main driver stage and iii) the main driver bias circuit is placed near the main power stage and the sub-power stage. The SWPA operating in Band 9 (1749.9 to 1784.9 MHz), which was designed and fabricated from the foregoing considerations, shows a remarkable improvement in the Pout turn-on delay: a reduced power level error of 0.74 dB from turn-off to turn-on in the sub-amplifier chain and a reduced power level error of over 0.30 dB from turn-off to turn-on in the main amplifier chain. The main RF power measurements conducted with a 3.4-V supply voltage and a Band 9 WCDMA HSDPA modulated signal are as follows. The SWPA delivers a Pout of 28.5 dBm, a power gain (Gp) of 28 dB, and a PAE of 39% while restricting the ACLR1 to less than -40 dBc in the main amplifier chain. In the sub-amplifier chain, 17 dBm of Pout, 23.5 dB of Gp, and 27% of PAE are obtained at the same ACLR1 level.

A novel method is proposed to retrieve image sequences with the goal of forecasting complex and time-varying natural patterns. To that end, we introduce a framework called Memory-Based Forecasting; it provides forecast information based on the temporal development of past retrieved sequences. This paper targets the radar echo patterns in weather radar images, and aims to realize an image retrieval method that supports weather forecasters in predicting local precipitation. To characterize the radar echo patterns, an appearance-based representation of the echo pattern, and its velocity field are employed. Temporal texture features are introduced to represent local pattern features including non-rigid complex motion. Furthermore, the temporal development of a sequence is represented as paths in eigenspaces of the image features, and a normalized distance between two sequences in the eigenspace is proposed as a dissimilarity measure that is used in retrieving similar sequences. Several experiments confirm the good performance of the proposed retrieval scheme, and indicate the predictability of the image sequence.

The effectiveness of periodic dispersion compensation on single-channel 40 Gbit/s soliton transmission system was experimentally investigated. This technique requires just the dispersion compensation fibers and wideband optical filters in the transmission line, which has no difficulty to be used in the practical system. By using polarization-division-multiplexing together with periodic dispersion compensation, single-channel 40 Gbit/s transmission over 4700 km was demonstrated. Single-polarization 40 Gbit/s transmission experiments, which are more suitable for system implementation and compatible with WDM were also conducted. We investigated the transmission characteristics and pulse dynamics in different dispersion maps and in the optimized dispersion map, single-channel, single-polarization 40 Gbit/s transmission over 6300 km was successfully demonstrated.