Intelligent reconfigurable surfaces (IRS) have attracted much attention from both industry and academia due to their performance improving capability and low complexity for 6G wireless communication systems. In this letter, we introduce an IRS-assisted space-time line code (STLC) technique. The STLC was introduced as a promising technique to acquire the optimal diversity gain in 1×2 single-input multiple-output (SIMO) channel without channel state information at receiver (CSIR). Using the cosine similarity theorem, we propose a novel phase-steering technique for the proposed IRS-assisted STLC technique. We also mathematically characterize the proposed IRS-assisted STLC technique in terms of outage probability and bit-error rate (BER). Based on computer simulations, it is shown that the results of analysis shows well match with the computer simulation results for various communication scenarios.

In this letter, we propose an energy beamforming empowered relaying scheme for a batteryless IoT network, where wireless-powered relays are deployed between the hybrid access point (HAP) and batteryless IoT devices to assist the uplink information transmission from the devices to the HAP. In particular, the HAP first exploits energy beamforming to efficiently transmit radio frequency (RF) signals to transfer energy to the relays and as the incident signals to enable the information backscattering of batteryless IoT devices. Then, each relay uses the harvested energy to forward the decoded signals from its corresponding batteryless IoT device to the HAP, where the maximum-ratio combing is used for further performance improvement. To maximize the network sum-rate, the joint optimization of energy beamforming vectors at the HAP, network time scheduling, power allocation at the relays, and relection coefficient at the users is investigated. As the formulated problem is non-convex, we propose an alternating optimization algorithm with the variable substitution and semi-definite relaxation (SDR) techniques to solve it efficiently. Specifically, we prove that the obtained energy beamforming matrices are always rank-one. Numerical results show that compared to the benchmark schemes, the proposed scheme can achieve a significant sum-rate gain.

In this paper, we report the recent progress in visible light positioning and communication systems using light-emitting diodes (LEDs). Due to the wide deployment of LEDs for indoor illumination, visible light positioning (VLP) and visible light communication (VLC) using existing LEDs fixtures have attracted great attention in recent years. Here, we review our recent works on visible light positioning and communication, including image sensor-based VLP, photodetector-based VLP, integrated VLC and VLP (VLCP) systems, and heterogeneous radio frequency (RF) and VLC (RF/VLC) systems.

With the development of network technology, next-generation networks must satisfy many new requirements for network functions and performance. The processing of overlong packet fields is one of the requirements and is also the basis for ID-based routing and content lookup, and packet field addition/deletion mechanisms. The current SDN switches do not provide good support for the processing of overlong fields. In this paper, we propose a series of optimization mechanisms for protocol-oblivious instructions, in which we address the problem of insufficient support for overlong data in existing SDN switches by extending the bit width of instructions and accelerating them using SIMD instruction sets. We also provide an intermediate representation of the protocol-oblivious instruction set to improve the efficiency of storing and reading instruction blocks, and further reduce the execution time of instruction blocks by preprocessing them. The experiments show that our approach improves the performance of overlong data processing by 56%. For instructions involving packet field addition and deletion, the improvement in performance reaches 455%. In normal forwarding scenarios, our solution reduces the packet forwarding latency by around 30%.

This study examined whether distance learning in a first-year PBL courses in the first unit of instruction improves the effectiveness of subsequent group work learning over face-to-face learning. The first-year PBL consisted of three units: an input unit, a group work unit and an outcomes presentation unit. In 2017/2018, the input unit was conducted in the classroom with face-to-face learning. In 2017, a workshop was held in addition to face-to-face learning in classroom. In 2020/2021, the input unit was conducted with distance learning. In the years, approximately 100 people completed the questionnaire. A preliminary check confirmed that the average score of students' self-assessment of their own social skills were not significantly different among the four years. Analysis showed that in 2018, the perceived efficacy in the group work unit depended on learners' high social skills. Alternatively, in 2017/2020/2021, the perceived efficacy in group work was not dependent on learners' social skills. This suggests that distance learning and face-to-face learning with workshop learning, instead of full face-to-face learning for the units placed before the group work unit facilitates the learning efficacy of the group work unit, even for students with social skill concerns.

In this study, we have proposed a millimeter-wave (MMW) single-pixel imaging (SPI) system with a liquid-crystal (LC) mask cell. The LC cell functions as an electrically switchable mask based on the change in absorption properties, which depend on the orientation of the LC. We investigated the influence of noise on the measured and estimated data (reconstructed image). The proposed system exhibited moderate robustness against random noise (that were added) compared to raster scan-based and Hadamard matrix-based SPI systems. Finally, the results of some demonstrative experiments were introduced to ensure the applicability of the constructed MMW-SPI system, and steps for improving the reconstructed image quality were discussed.

During the COVID-19 pandemic there was a rapid shift to emergency remote teaching practices and online tools for education have already gained further attention. While eLearning initiatives are developed and its implementation at scale are widely discussed, this research focuses on the utilization of data which can be logged in such eLearning systems. We demonstrate the need and potential of utilizing learning logs to create services supporting sustainable quality improvement of education. Learning and Evidence Analytics Framework (LEAF), is the overarching technology framework with affordances to adopt evidence-based practices for education. It aims to promote learning for all by introducing data-driven services for personalized approaches.

Contemporary development projects benefit from code review as it improves the quality of a project. Large ecosystems of inter-dependent projects like OpenStack generate a large number of reviews, which poses new challenges for collaboration (improving patches, fixing defects). Review tools allow developers to link between patches, to indicate patch dependency, competing solutions, or provide broader context. We hypothesize that such patch linkage may also simulate cross-collaboration. With a case study of OpenStack, we take a first step to explore collaborations that occur after a patch linkage was posted between two patches (i.e., cross-patch collaboration). Our empirical results show that although patch linkage that requests collaboration is relatively less prevalent, the probability of collaboration is relatively higher. Interestingly, the results also show that collaborative contributions via patch linkage are non-trivial, i.e, contributions can affect the review outcome (such as voting) or even improve the patch (i.e., revising). This work opens up future directions to understand barriers and opportunities related to this new kind of collaboration, that assists with code review and development tasks in large ecosystems.

Currently, NDN-based VANETs protocols have several problems with packet overhead of rebroadcasting, control packet, and the accuracy of next-hop selection due to the dynamic topology. To deal with these problems in this paper, we propose a robust and lightweight forwarding protocol in Vehicular ad-hoc Named Data Networking. The concept of our forwarding protocol is adopting a packet-free approach. A vehicle collects its neighbor's visual identification by a pair of cameras (front and rear) to assign a unique visual ID for each node. Based on these IDs, we construct a hop-by-hop FIB-based forwarding strategy effectively. Furthermore, the Face duplication [1] in the wireless environment causes an all-broadcast problem. We add the visual information to Face to distinguish the incoming and outgoing Face to prevent broadcast-storm and make FIB and PIT work more accurate and efficiently. The performance evaluation results focusing on the communication overhead show that our proposal has better results in overall network traffic costs and Interest satisfaction ratio than previous works.

The mean, median, and mode are usually calculated from univariate observations as the most basic representative values of a random variable. To measure the spread of the distribution, the standard deviation, interquartile range, and modal interval are also calculated. When we analyze continuous relations between a pair of random variables from bivariate observations, regression analysis is often used. By minimizing appropriate costs evaluating regression errors, we estimate the conditional mean, median, and mode. The conditional standard deviation can be estimated if the bivariate observations are obtained from a Gaussian process. Moreover, the conditional interquartile range can be calculated for various distributions by the quantile regression that estimates any conditional quantile (percentile). Meanwhile, the study of the modal interval regression is relatively new, and spline regression models, known as flexible models having the optimality on the smoothness for bivariate data, are not yet used. In this paper, we propose a modal interval regression method based on spline quantile regression. The proposed method consists of two steps. In the first step, we divide the bivariate observations into bins for one random variable, then detect the modal interval for the other random variable as the lower and upper quantiles in each bin. In the second step, we estimate the conditional modal interval by constructing both lower and upper quantile curves as spline functions. By using the spline quantile regression, the proposed method is widely applicable to various distributions and formulated as a convex optimization problem on the coefficient vectors of the lower and upper spline functions. Extensive experiments, including settings of the bin width, the smoothing parameter and weights in the cost function, show the effectiveness of the proposed modal interval regression in terms of accuracy and visual shape for synthetic data generated from various distributions. Experiments for real-world meteorological data also demonstrate a good performance of the proposed method.

When a disaster hits a network, network service disruptions can occur even if the network facilities have survived and battery and power generators are provided. This is because in the event of a disaster, the power supply will not be restarted within the lifetime of the battery or oil transportation will not be restarted before running out of oil and power will be running out. Therefore, taking a power grid into account is important. This paper proposes a polynomial-time algorithm to identify the critical location C*D of a communications network Nc when a disaster hits. Electrical power grid Np supplies power to the nodes of Nc, and a link in Nc is disconnected when a node or a link in Nc or Np fails. Here, the disaster area is modeled as co-centric disks and the failure probability is higher in the inner disk than the outer one. The location of the center of the disaster with the greatest expected number of disconnected links in Nc is taken as the critical location C*D.

In this paper, we proposed the phase disturbing device using randomly-fluctuated liquid crystal (LC) alignment to reduce the speckle noise generated in holographic displays. Some parameters corresponding to the alignment fluctuation of thick LC layer were quantitatively evaluated, and we clarified the effect of the LC alignment fluctuation with the parameters on speckle noise reduction.

This paper focuses on the “data collection period” for training a better Just-In-Time (JIT) defect prediction model — the early commit data vs. the recent one —, and conducts a large-scale comparative study to explore an appropriate data collection period. Since there are many possible machine learning algorithms for training defect prediction models, the selection of machine learning algorithms can become a threat to validity. Hence, this study adopts the automatic machine learning method to mitigate the selection bias in the comparative study. The empirical results using 122 open-source software projects prove the trend that the dataset composed of the recent commits would become a better training set for JIT defect prediction models.

This paper proposes a novel approach to low complexity soft input decoding for lattice reduction-aided MIMO receivers. The proposed approach feeds a soft input decoder with soft signals made from hard decision signals generated by using a lattice reduction-aided linear detector. The soft signal is a weighted-sum of some candidate vectors that are near by the hard decision signal coming out from the lattice reduction-aided linear detector. This paper proposes a technique to adjust the weight adapt to the channel for the higher transmission performance. Furthermore, we propose to introduce a coefficient that is used for the weights in order to enhance the transmission performance. The transmission performance is evaluated in a 4×4 MIMO channel. When a linear MMSE filter or a serial interference canceller is used as the linear detector, the proposed technique achieves about 1.0dB better transmission performance at the BER of 10-5 than the decoder fed with the hard decision signals. In addition, the low computational complexity of the proposed technique is quantitatively evaluated.

Aiming at the problem of spatial focus regions distribution dispersion and dislocation in feature pyramid networks and insufficient feature dependency acquisition in both spatial and channel dimensions, this paper proposes a spatial-temporal aggregated shuffle attention for video instance segmentation (STASA-VIS). First, an mixed subsampling (MS) module to embed activating features from the low-level target area of feature pyramid into the high-level is designed, so as to aggregate spatial information on target area. Taking advantage of the coherent information in video frames, STASA-VIS uses the first ones of every 5 video frames as the key-frames and then propagates the keyframe feature maps of the pyramid layers forward in the time domain, and fuses with the non-keyframe mixed subsampled features to achieve time-domain consistent feature aggregation. Finally, STASA-VIS embeds shuffle attention in the backbone to capture the pixel-level pairwise relationship and dimensional dependencies among the channels and reduce the computation. Experimental results show that the segmentation accuracy of STASA-VIS reaches 41.2%, and the test speed reaches 34FPS, which is better than the state-of-the-art one stage video instance segmentation (VIS) methods in accuracy and achieves real-time segmentation.

Recent developments in engineering applications of stochastic resonance have expanded to various fields, especially biomedicine. Deterministic chaos generates a phenomenon known as chaotic resonance, which is similar to stochastic resonance. However, engineering applications of chaotic resonance are limited owing to the problems in controlling chaos, despite its uniquely high sensitivity to weak signal responses. To tackle these problems, a previous study proposed “reduced region of orbit” (RRO) feedback methods, which cause chaotic resonance using external feedback signals. However, this evaluation was conducted under noise-free conditions. In actual environments, background noise and measurement errors are inevitable in the estimation of RRO feedback strength; therefore, their impact must be elucidated for the application of RRO feedback methods. In this study, we evaluated the chaotic resonance induced by the RRO feedback method in chaotic neural systems in the presence of stochastic noise. Specifically, we focused on the chaotic resonance induced by RRO feedback signals in a neural system composed of excitatory and inhibitory neurons, a typical neural system wherein chaotic resonance is observed in the presence of additive noise and feedback signals including the measurement error (called contaminant noise). It was found that for a relatively small noise strength, both types of noise commonly degenerated the degree of synchronization in chaotic resonance induced by RRO feedback signals, although these characteristics were significantly different. In contrast, chaos-chaos intermittency synchronization was observed for a relatively high noise strength owing to the noise-induced attractor merging bifurcation for both types of noise. In practical neural systems, the influence of noise is unavoidable; therefore, this study highlighted the importance of the countermeasures for noise in the application of chaotic resonance and utilization of noise-induced attractor merging bifurcation.

There have been lots of previous studies on fluency evaluation of spontaneous speech. However, most of them focus on lexical cues, and little emphasis is placed on how diverse acoustic features and deep end-to-end models contribute to improving the performance. In this paper, we describe multi-layer neural network to investigate not only lexical features extracted from transcription, but also consider utterance-level acoustic features from audio data. We also conduct the experiments to investigate the performance of end-to-end approaches with mel-spectrogram in this task. As the speech fluency evaluation task, we evaluate our proposed method in two binary classification tasks of fluent speech detection and disfluent speech detection. Speech data of around 10 seconds duration each with the annotation of the three classes of “fluent,” “neutral,” and “disfluent” is used for evaluation. According to the two way splits of those three classes, the task of fluent speech detection is defined as binary classification of fluent vs. neutral and disfluent, while that of disfluent speech detection is defined as binary classification of fluent and neutral vs. disfluent. We then conduct experiments with the purpose of comparative evaluation of multi-layer neural network with diverse features as well as end-to-end models. For the fluent speech detection, in the comparison of utterance-level disfluency-based, prosodic, and acoustic features with multi-layer neural network, disfluency-based and prosodic features only are better. More specifically, the performance improved a lot when removing all of the acoustic features from the full set of features, while the performance is damaged a lot if fillers related features are removed. Overall, however, the end-to-end Transformer+VGGNet model with mel-spectrogram achieves the best results. For the disfluent speech detection, the multi-layer neural network using disfluency-based, prosodic, and acoustic features without fillers achieves the best results. The end-to-end Transformer+VGGNet architecture also obtains high scores, whereas it is exceeded by the best results with the multi-layer neural network with significant difference. Thus, unlike in the fluent speech detection, disfluency-based and prosodic features other than fillers are still necessary in the disfluent speech detection.

Recently, deep learning for image generation with a guide for the generation has been progressing. Many methods have been proposed to generate the animation of facial expression change from a single face image by transferring some facial expression information to the face image. In particular, the method of using facial landmarks as facial expression information can generate a variety of facial expressions. However, most methods do not focus on anime characters but humans. Moreover, we attempted to apply several existing methods to anime characters by training the methods on an anime character face dataset; however, they generated images with noise, even in regions where there was no change. The first order motion model (FOMM) is an image generation method that takes two images as input and transfers one facial expression or pose to the other. By explicitly calculating the difference between the two images based on optical flow, FOMM can generate images with low noise in the unchanged regions. In the following, we focus on the aspect of the face image generation in FOMM. When we think about the employment of facial landmarks as targets, the performance of FOMM is not enough because FOMM cannot use a facial landmark as a facial expression target because the appearances of a face image and a facial landmark are quite different. Therefore, we propose an advanced FOMM method to use facial landmarks as a facial expression target. In the proposed method, we change the input data and data flow to use facial landmarks. Additionally, to generate face images with expressions that follow the target landmarks more closely, we introduce the landmark estimation loss, which is computed by comparing the landmark detected from the generated image with the target landmark. Our experiments on an anime character face image dataset demonstrated that our method is effective for landmark-guided face image generation for anime characters. Furthermore, our method outperformed other methods quantitatively and generated face images with less noise.

At ToSC 2021, Sakamoto et al. proposed Rocca, an AES-based encryption scheme, for Beyond 5G applications. They presented a class of round functions that achieved impressive performance in software by improving the design strategy for constructing an efficient AES-based round function that was proposed by Jean and Nikolić at FSE 2016. In this paper, we revisit their design strategy for finding more efficient round functions. We add new requirements further to improve speed of Rocca. Specifically, we focus on the number of temporary registers for updating the round function and search for round functions with the minimum number of required temporary registers. As a result, we find a class of round functions with only one required temporary register, while round function of Rocca requires two temporary registers. We show that new round functions are significantly faster than that of Rocca on the latest Ice Lake and Tiger Lake architectures. We emphasize that, regarding speed, our round functions are optimal among the Rocca class of round functions because the search described in this paper covers all candidates that satisfy the requirements of Rocca.

Monocular depth estimation has improved drastically due to the development of deep neural networks (DNNs). However, recent studies have revealed that DNNs for monocular depth estimation contain vulnerabilities that can lead to misestimation when perturbations are added to input. This study investigates whether DNNs for monocular depth estimation is vulnerable to misestimation when patterned light is projected on an object using a video projector. To this end, this study proposes an evolutionary adversarial attack method with multi-fidelity evaluation scheme that allows creating adversarial examples under black-box condition while suppressing the computational cost. Experiments in both simulated and real scenes showed that the designed light pattern caused a DNN to misestimate objects as if they have moved to the back.