To cope with ever growing mobile data traffic, we recently proposed a concept of cellular ultra-dense radio access network (RAN). In the cellular ultra-dense RAN, a number of distributed antennas are deployed in the base station (BS) coverage area (cell) and user-clusters are formed to perform small-scale distributed multiuser multi-input multi-output (MU-MIMO) transmission and reception in each user-cluster in parallel using the same frequency resource. We also proposed a decentralized interference coordination (IC) framework to effectively mitigate both intra-cell and inter-cell interferences caused in the cellular ultra-dense RAN. The inter-cell IC adopted in this framework is the fractional frequency reuse (FFR), realized by applying the channel segregation (CS) algorithm, and is called CS-FFR in this paper. CS-FFR divides the available bandwidth into several sub-bands and allocates multiple sub-bands to different cells. In this paper, focusing on the optimization of the CS-FFR, we find by computer simulation the optimum bandwidth division number and the sub-band allocation ratio to maximize the link capacity. We also discuss the convergence speed of CS-FFR in a cellular ultra-dense RAN.

This paper proposes low complexity resource allocation in frequency domain non-orthogonal multiple access where many devices access with a base station. The number of the devices is assumed to be more than that of the resource for network capacity enhancement, which is demanded in massive machine type communications (mMTC). This paper proposes two types of resource allocation techniques, all of which are based on the MIN-MAX approach. One of them seeks for nicer resource allocation with only channel gains. The other technique applies the message passing algorithm (MPA) for better resource allocation. The proposed resource allocation techniques are evaluated by computer simulation in frequency domain non-orthogonal multiple access. The proposed technique with the MPA achieves the best bit error rate (BER) performance in the proposed techniques. However, the computational complexity of the proposed techniques with channel gains is much smaller than that of the proposed technique with the MPA, whereas the BER performance of the proposed techniques with channel gains is only about 0.1dB inferior to that with the MPA in the multiple access with the overloading ratio of 1.5 at the BER of 10-4. They attain the gain of about 10dB at the BER of 10-4 in the multiple access with the overloading ration of 2.0. Their complexity is 10-16 as small as the conventional technique.

Electrophysiology, which is the study of the electrical properties of biological tissues and cells, has become indispensable in modern clinical research, diagnostics, disease monitoring and therapeutics. In this paper we present a brief history of this discipline and how integrated circuit design shaped electrophysiology in the last few decades. We will discuss how biopotential amplifier design has evolved from the classical three-opamp architecture to more advanced high-performance circuits enabling long-term wearable monitoring of the autonomous and central nervous system. We will also discuss how these integrated circuits evolved to measure in-vivo neural circuits. This paper targets readers who are new to the domain of biopotential recording and want to get a brief historical overview and get up to speed on the main circuit design concepts for both wearable and in-vivo biopotential recording.

This paper presents a high-NIR sensitivity SOI-gate lock-in pixel with improved modulation contrast. The proposed pixel has a shallow buried channel and intermediate gates to create both a high lateral electric field and a potential barrier to parasitic light sensitivity. Device simulation results showed that parasitic light sensitivity reduced from 13.7% to 0.13% compared to the previous structure.

Energy harvesting has been widely investigated as a potential solution to supply power for Internet of Things (IoT) devices. Computing devices must operate intermittently rather than continuously, because harvested energy is unstable and some of IoT applications can be periodic. Therefore, processors for IoT devices with intermittent operation must feature a hibernation mode with zero-standby-power in addition to energy-efficient normal mode. In this paper, we describe the layout design and measurement results of a nonvolatile standard cell memory (NV-SCM) and nonvolatile flip-flops (NV-FF) with a nonvolatile memory using Fishbone-in-Cage Capacitor (FiCC) suitable for IoT processors with intermittent operations. They can be fabricated in any conventional CMOS process without any additional mask. NV-SCM and NV-FF are fabricated in a 180nm CMOS process technology. The area overhead by nonvolatility of a bit cell are 74% in NV-SCM and 29% in NV-FF, respectively. We confirmed full functionality of the NV-SCM and NV-FF. The nonvolatile system using proposed NV-SCM and NV-FF can reduce the energy consumption by 24.3% compared to the volatile system when hibernation/normal operation time ratio is 500 as shown in the simulation.

This paper presents on-chip characterization of electrostatic discharge (ESD) impacts applied on the Si-substrate backside of a flip-chip mounted integrated circuit (FC-IC) chip. An FC-IC chip has an open backside and there is a threat of reliability problems and malfunctions caused by the backside ESD. We prepared a test FC-IC chip and measured Si-substrate voltage fluctuations on its frontside by an on-chip monitor (OCM) circuit. The voltage surges as large as 200mV were observed on the frontside when a 200-V ESD gun was irradiated through a 5kΩ contact resistor on the backside of a 350μm thick Si substrate. The distribution of voltage heights was experimentally measured at 20 on-chip locations among thinned Si substrates up to 40μm, and also explained in full-system level simulation of backside ESD impacts with the equivalent models of ESD-gun operation and FC-IC chip assembly.

In this research, we investigated the threshold voltage (VTH) control by partial polarization of metal-ferroelectric-semiconductor field-effect transistors (MFSFETs) with 5 nm-thick nondoped HfO2 gate insulator utilizing Kr-plasma sputtering for Pt gate electrode deposition. The remnant polarization (2Pr) of 7.2 μC/cm2 was realized by Kr-plasma sputtering for Pt gate electrode deposition. The memory window (MW) of 0.58 V was realized by the pulse amplitude and width of -5/5 V, 100 ms. Furthermore, the VTH of MFSFET was controllable by program/erase (P/E) input pulse even with the pulse width below 100 ns which may be caused by the reduction of leakage current with decreasing plasma damage.

We have proposed and demonstrated a device fabrication process of physically defined quantum dots utilizing electron beam lithography employing a negative-tone resist toward high-density integration of silicon quantum bits (qubits). The electrical characterization at 3.8K exhibited so-called Coulomb diamonds, which indicates successful device operation as single-electron transistors. The proposed device fabrication process will be useful due to its high compatibility with the large-scale integration process.

The transfer distance of the wireless power transfer (WPT) system with relay coil is longer, so this technology have a better practical perspective. But the location of the relay coil has a great impact on the transmission efficiency of the WPT system, and it is not easy to analyze. In order to research the influence law of the relay coil location on the transmission efficiency and obtain the optimal location, the paper firstly proposes the concept of relay coil location factor. And based on the location factor, a novel method for studying the influence of the relay coil location on the transmission efficiency is proposed. First, the mathematical model between the transmission efficiency and the location factor is built. Next, considering the transfer distance, coil radius, coil turns and load resistance, a lot of simulations are carried out to analyze the influence of the location factor on the transmission efficiency, respectively. The influence law and the optimal location factor were obtained with different parameters. Finally, a WPT system with relay coil was built for experiments. And the experiment results verify that the theoretical analysis is correct and the proposed method can simplify the analysis progress of the influence of relay coil location on the transmission efficiency. Moreover, the proposed method and the research conclusions can provide guidance for designing the multiple coils structure WPT system.

Social relationships (e.g., couples, opponents) are the foundational part of society. Social relation atmosphere describes the overall interaction environment between social relationships. Discovering social relation atmosphere can help machines better comprehend human behaviors and improve the performance of social intelligent applications. Most existing research mainly focuses on investigating social relationships, while ignoring the social relation atmosphere. Due to the complexity of the expressions in video data and the uncertainty of the social relation atmosphere, it is even difficult to define and evaluate. In this paper, we innovatively analyze the social relation atmosphere in video data. We introduce a Relevant Visual Concept (RVC) from the social relationship recognition task to facilitate social relation atmosphere recognition, because social relationships contain useful information about human interactions and surrounding environments, which are crucial clues for social relation atmosphere recognition. Our approach consists of two main steps: (1) we first generate a group of visual concepts that preserve the inherent social relationship information by utilizing a 3D explanation module; (2) the extracted relevant visual concepts are used to supplement the social relation atmosphere recognition. In addition, we present a new dataset based on the existing Video Social Relation Dataset. Each video is annotated with four kinds of social relation atmosphere attributes and one social relationship. We evaluate the proposed method on our dataset. Experiments with various 3D ConvNets and fusion methods demonstrate that the proposed method can effectively improve recognition accuracy compared to end-to-end ConvNets. The visualization results also indicate that essential information in social relationships can be discovered and used to enhance social relation atmosphere recognition.

Various haze removal methods based on the atmospheric scattering model have been presented in recent years. Most methods have targeted strong haze images where light is scattered equally in all color channels. This paper presents a haze removal method using near-infrared (NIR) images for relatively weak haze images. In order to recover the lost edges, the presented method first extracts edges from an appropriately weighted NIR image and fuses it with the color image. By introducing a wavelength-dependent scattering model, our method then estimates the transmission map for each color channel and recovers the color more naturally from the edge-recovered image. Finally, the edge-recovered and the color-recovered images are blended. In this blending process, the regions with high lightness, such as sky and clouds, where unnatural color shifts are likely to occur, are effectively estimated, and the optimal weighting map is obtained. Our qualitative and quantitative evaluations using 59 pairs of color and NIR images demonstrated that our method can recover edges and colors more naturally in weak haze images than conventional methods.

A feedback node set (FNS) of a graph is a subset of the nodes of the graph whose deletion makes the residual graph acyclic. By finding an FNS in an interconnection network, we can set a check point at each node in it to avoid a livelock configuration. Hence, to find an FNS is a critical issue to enhance the dependability of a parallel computing system. In this paper, we propose a method to find FNS's in n-pancake graphs and n-burnt pancake graphs. By analyzing the types of cycles proposed in our method, we also give the number of the nodes in the FNS in an n-pancake graph, (n-2.875)(n-1)!+1.5(n-3)!, and that in an n-burnt pancake graph, 2n-1(n-1)!(n-3.5).

High power dissipation during scan test often causes undue yield loss, especially for low-power circuits. One major reason is that the resulting IR-drop in shift mode may corrupt test data. A common approach to solving this problem is partial-shift, in which multiple scan chains are formed and only one group of scan chains is shifted at a time. However, existing partial-shift based methods suffer from two major problems: (1) their IR-drop estimation is not accurate enough or computationally too expensive to be done for each shift cycle; (2) partial-shift is hence applied to all shift cycles, resulting in long test time. This paper addresses these two problems with a novel IR-drop-aware scan shift method, featuring: (1) Cycle-based IR-Drop Estimation (CIDE) supported by a GPU-accelerated dynamic power simulator to quickly find potential shift cycles with excessive peak IR-drop; (2) a scan shift scheduling method that generates a scan chain grouping targeted for each considered shift cycle to reduce the impact on test time. Experiments on ITC'99 benchmark circuits show that: (1) the CIDE is computationally feasible; (2) the proposed scan shift schedule can achieve a global peak IR-drop reduction of up to 47%. Its scheduling efficiency is 58.4% higher than that of an existing typical method on average, which means our method has less test time.

Question-answering tasks over structured knowledge (i.e., tables and graphs) require the ability to encode structural information. Traditional pre-trained language models trained on linear-chain natural language cannot be directly applied to encode tables and graphs. The existing methods adopt the pre-trained models in such tasks by flattening structured knowledge into sequences. However, the serialization operation will lead to the loss of the structural information of knowledge. To better employ pre-trained transformers for structured knowledge representation, we propose a novel structure-aware transformer (SATrans) that injects the local-to-global structural information of the knowledge into the mask of the different self-attention layers. Specifically, in the lower self-attention layers, SATrans focus on the local structural information of each knowledge token to learn a more robust representation of it. In the upper self-attention layers, SATrans further injects the global information of the structured knowledge to integrate the information among knowledge tokens. In this way, the SATrans can effectively learn the semantic representation and structural information from the knowledge sequence and the attention mask, respectively. We evaluate SATrans on the table fact verification task and the knowledge base question-answering task. Furthermore, we explore two methods to combine symbolic and linguistic reasoning for these tasks to solve the problem that the pre-trained models lack symbolic reasoning ability. The experiment results reveal that the methods consistently outperform strong baselines on the two benchmarks.

As a typical surface defect of tunnel lining structures, cracking disease affects the durability of tunnel structures and poses hidden dangers to tunnel driving safety. Factors such as interference from the complex service environment of the tunnel and the low signal-to-noise ratio of the crack targets themselves, have led to existing crack recognition methods based on semantic segmentation being unable to meet actual engineering needs. Based on this, this paper uses the Unet network as the basic framework for crack identification and proposes to construct a multi-kernel convolution cascade enhancement (MKCE) model to achieve accurate detection and identification of crack diseases. First of all, to ensure the performance of crack feature extraction, the model modified the main feature extraction network in the basic framework to ResNet-50 residual network. Compared with the VGG-16 network, this modification can extract richer crack detail features while reducing model parameters. Secondly, considering that the Unet network cannot effectively perceive multi-scale crack features in the skip connection stage, a multi-kernel convolution cascade enhancement module is proposed by combining a cascaded connection of multi-kernel convolution groups and multi-expansion rate dilated convolution groups. This module achieves a comprehensive perception of local details and the global content of tunnel lining cracks. In addition, to better weaken the effect of tunnel background clutter interference, a convolutional block attention calculation module is further introduced after the multi-kernel convolution cascade enhancement module, which effectively reduces the false alarm rate of crack recognition. The algorithm is tested on a large number of subway tunnel crack image datasets. The experimental results show that, compared with other crack recognition algorithms based on deep learning, the method in this paper has achieved the best results in terms of accuracy and intersection over union (IoU) indicators, which verifies the method in this paper has better applicability.

Personalized stock recommendations aim to suggest stocks tailored to individual investor needs, significantly aiding the financial decision making of an investor. This study shows the advantages of incorporating context into personalized stock recommendation systems. We embed item contextual information such as technical indicators, fundamental factors, and business activities of individual stocks. Simultaneously, we consider user contextual information such as investors' personality traits, behavioral characteristics, and attributes to create a comprehensive investor profile. Our model incorporating contextual information, validated on novel stock recommendation tasks, demonstrated a notable improvement over baseline models when incorporating these contextual features. Consistent outperformance across various hyperparameters further underscores the robustness and utility of our model in integrating stocks' features and investors' traits into personalized stock recommendations.

This paper proposes a fault-resilient ROS platform supporting rapid fault detection and recovery. The platform employs heartbeat-based fault detection and node replication-based recovery. Our prototype implementation on top of the ROS Melodic shows a great performance in evaluations with a Nvidia development board and an inverted pendulum device.

With the emergence of a large quantity of data in science and industry, it is urgent to improve the prediction accuracy and reduce the high complexity of Gaussian process regression (GPR). However, the traditional global approximation and local approximation have corresponding shortcomings, such as global approximation tends to ignore local features, and local approximation has the problem of over-fitting. In order to solve these problems, a large-scale Gaussian process regression algorithm (RFFLT) combining random Fourier features (RFF) and local approximation is proposed. 1) In order to speed up the training time, we use the random Fourier feature map input data mapped to the random low-dimensional feature space for processing. The main innovation of the algorithm is to design features by using existing fast linear processing methods, so that the inner product of the transformed data is approximately equal to the inner product in the feature space of the shift invariant kernel specified by the user. 2) The generalized robust Bayesian committee machine (GRBCM) based on Tsallis mutual information method is used in local approximation, which enhances the flexibility of the model and generates a sparse representation of the expert weight distribution compared with previous work. The algorithm RFFLT was tested on six real data sets, which greatly shortened the time of regression prediction and improved the prediction accuracy.

Micro-expression recognition (MER) draws intensive research interest as micro-expressions (MEs) can infer genuine emotions. Prior information can guide the model to learn discriminative ME features effectively. However, most works focus on researching the general models with a stronger representation ability to adaptively aggregate ME movement information in a holistic way, which may ignore the prior information and properties of MEs. To solve this issue, driven by the prior information that the category of ME can be inferred by the relationship between the actions of facial different components, this work designs a novel model that can conform to this prior information and learn ME movement features in an interpretable way. Specifically, this paper proposes a Decomposition and Reconstruction-based Graph Representation Learning (DeRe-GRL) model to efectively learn high-level ME features. DeRe-GRL includes two modules: Action Decomposition Module (ADM) and Relation Reconstruction Module (RRM), where ADM learns action features of facial key components and RRM explores the relationship between these action features. Based on facial key components, ADM divides the geometric movement features extracted by the graph model-based backbone into several sub-features, and learns the map matrix to map these sub-features into multiple action features; then, RRM learns weights to weight all action features to build the relationship between action features. The experimental results demonstrate the effectiveness of the proposed modules, and the proposed method achieves competitive performance.

We propose a quantitative measurement technique of video forgery that eliminates the decision burden of subtle boundary between normal and tampered patterns. We also propose the automatic adjustment scheme of spatial and temporal target zones, which maximizes the abnormality measurement of forged videos. Evaluation shows that the proposed scheme provides manifest detection capability against both inter-frame and intra-frame forgeries.