A dual-band dual-polarization array antenna with improved bandwidth for an advanced multi-function radio function concept (AMRFC) radar application is proposed. To improve the S-band impedance bandwidth, the proposed antenna uses modified coupling feed patch. The measured bandwidth of the prototype array is 19.8% and 25.7% for the S- and X-band, respectively. The isolation between the two orthogonal polarizations is higher than 15 dB and cross-polarization level is less than -17 dB for both S- and X-bands.

A simple yet effective time domain correlation channel estimation method is proposed for multiple-input multiple-output (MIMO) systems over dispersive channels. It is known that the inherent co-channel interference (CCI) and inter-symbol interference (ISI) coexist when the signals propagate through MIMO frequency selective channels, which renders the MIMO channel estimation intractable. By elaborately devising the quasi-orthogonal training sequences between multiple antennas which have constant autocorrelation property with different cyclic shifts in the time domain, the interferences induced by ISI and CCI can be simultaneously maintained at a constant and identical value under quasi-static channels. As a consequence, it is advisable to implement the joint ISI and CCI cancelation by solving the constructed linear equation on the basis of the correlation output with optional correlation window. Finally, a general and simplified closed-form expression of the estimated channel impulse response can be acquired without matrix inversion. Additionally, the layered space-time (LST) minimum mean square error (MMSE) (LST-MMSE) frequency domain equalization is briefly described. We also provide some meaningful discussions on the beginning index of the variable correlation window and on the cyclic shift number of m-sequence of other antennas relative to the first antenna. Simulation results demonstrate that the proposed channel estimation approach apparently outperforms the existing schemes with a remarkable reduction in computational complexity.

The Generalized Feistel Structure (GFS) generally uses the sub-block-wise cyclic shift in the permutation layer, the layer between the two F function layers. For Type 2 GFS, at FSE 2010, Suzaki and Minematsu showed that a better diffusion property can be obtained if one uses some other sub-block-wise permutation. In this paper, we consider Type 1, Type 3, Source-Heavy (SH), and Target-Heavy (TH) GFSs, and study if their diffusion properties can be improved by changing the sub-block-wise cyclic shift. For Type 1 GFS and Type 3 GFS, we show that better permutations in terms of diffusion exist. For SH and TH GFSs, we show that the diffusion property does not change even if we change the sub-block-wise cyclic shift. We also experimentally derive optimum permutations in terms of diffusion, and evaluate the security of the resulting schemes against saturation, impossible differential, differential, and linear attacks.

In OFDM systems, residual inter-block interference can be suppressed by a time-domain equalizer that blindly shortens the effective length of a channel impulse response. To further improve the performance of blind equalizers, we propose a channel shortening method that attempts to maximize the minimum FFT output power over data subcarriers. Simulation results indicate that the max-min strategy has performance improvement over a conventional channel shortening method.

Given an integer n-dimensional lattice basis, the random sampling reduction was proven to find a short vector in arithmetic steps with an integer k, which is freely chosen by users. This paper introduces new random sampling reduction using precomputation techniques. The computation cost is almost independent of the lattice dimension number. The new method is therefore especially advantageous to find a short lattice vector in higher dimensions. The arithmetic operation number of our new method is about 20% of the random sampling reduction with 200 dimensions, and with 1000 dimensions it is less than 1% ( 1/130) of that of the random sampling reduction with representative parameter settings under reasonable assumptions.

We proposed a method for constructing constant-weight and multi-valued sequences from the cyclic difference sets by generalization of the method in binary case proposed by N. Li, X. Zeng and L. Hu in 2008. In this paper we give some properties about sets of such sequences and it is shown that a set of non-constant-weight sequences over Z4 with length 13 from the (13,4,1)-cyclic difference set, and a set of constant-weight sequences over Z5 with length 21 from the (21,5,1)-cyclic difference set have almost highest linear complexities and good profiles of all sequences' linear complexities. Moreover we investigate the value distribution, the linear complexity and correlation properties of a set of sequences with length 57 over GF(8) from the (57,8,1)-cyclic difference set. It is pointed out that this set also has good value distributions and almost highest linear complexities in similar to previous two sets over Z4 with length 13 and Z5 with length 21.

An ultra-wideband (UWB) system usually occupies a large frequency band, which may overlap with the spectrum of a narrow band system. The latter is referred to as a victim system. To effectively use frequency, a UWB system may create a notch in its spectrum to accommodate the victim signal for interference avoidance. Parameters of the notch such as the depth and the width of a notch need to be decided in accordance to victim systems. In this paper, we investigate the effective UWB avoidance by examining the suitable notch based on experimental evaluation. In the experiments, 3GPP LTE, Mobile WiMAX, as well as an IMT Advanced Test-bed are respectively employed to represent different types of victim systems. The UWB system is set up based on WiMedia specifications and operates at the UWB low band of 3.1–4.8 GHz. A notch is fabricated by nullifying the related subcarriers of the UWB signal. In addition, a filter or a window function is formed and employed to further smooth the notch. Bit error rate (BER) or packet error rate (PER) performances of victim systems are measured and used to evaluate the UWB interference. Our results show that when a notch is properly formed, the interference level introduced by UWB can be below the permitted level by regulations.

One key requirement for achieving network virtualization is resource isolation among slices (virtual networks), that is, to avoid interferences between slices of resources. This paper proposes two methods, per-slice shaping and per-link policing for network-resource isolation (NRI) in terms of bandwidth and delay. These methods use traffic shaping and traffic policing, which are widely-used traffic control methods for guaranteeing QoS. Per-slice shaping utilizes weighted fair queuing (WFQ) usually applied to a fine-grained flow such as a flow from a specific server application to a user. Since the WFQ for fine-grained flows requires many queues, it may not scale to a large number of slices with a large number of virtual nodes. Considering that the purpose of NRI is not thoroughly guaranteeing QoS but avoiding interferences between slices, we believe per-slice (not per virtual link) shaping satisfies our objective. In contrast, per-link policing uses traffic policing per virtual link. It requires less resource and achieves less-strict but more-scalable isolation between hundreds of slices (500 to 700 slices in estimation). Our results show that both methods perform NRI well but the performance of the former is better in terms of delay. Accordingly, per-slice shaping (with/without policing) is effective for delay-sensitive services while per-link policing may be sufficiently used for the other types of services.

A construction of shift sequence sets is proposed. Multiple distinct shift sequence sets are obtained by changing the parameters of the shift sequences. The shift sequences satisfy the conditions that P|L and P ≥ 2, where P is the length of the shift sequences, L is the length of the zero-correlation zone or low-correlation zone (ZCZ/LCZ). Then based on these shift sequence sets, many shift distinct ZCZ/LCZ sequence sets are constructed by using interleaving technique and complex Hadamard matrices. Furthermore, the new construction is optimal under the conditions proposed in this paper. Compared with previous constructions, the proposed construction extends the number of shift distinct ZCZ/LCZ sequence sets, so that more sequence sets are obtained for multi-cell quasi-synchronous code-division multiple access (QS-CDMA) systems.

In this paper we study quantum nondeterminism in multiparty communication. There are three (possibly) different types of nondeterminism in quantum computation: i) strong, ii) weak with classical proofs, and iii) weak with quantum proofs. Here we focus on the first one. A strong quantum nondeterministic protocol accepts a correct input with positive probability and rejects an incorrect input with probability 1. In this work we relate strong quantum nondeterministic multiparty communication complexity to the rank of the communication tensor in the Number-On-Forehead and Number-In-Hand models. In particular, by extending the definition proposed by de Wolf to nondeterministic tensor-rank (nrank), we show that for any boolean function f when there is no prior shared entanglement between the players, 1) in the Number-On-Forehead model the cost is upper-bounded by the logarithm of nrank(f); 2) in the Number-In-Hand model the cost is lower-bounded by the logarithm of nrank(f). Furthermore, we show that when the number of players is o(log log n), we have NQP BQP for Number-On-Forehead communication.

This letter proposes a new Hybrid Software Defined Network (HSDN) platform for the interoperation with legacy routing protocol to support hardware level network virtualization for multi-tenant environment. By considering current SDN issues in the production network, the proposed platform contributes to solve these issues at reasonable overhead. Our testbed shows that failure convergence time with the proposed platform is almost same as legacy routing protocol. On the other hand, it also shows that hardware level virtualization is supported with stable ICMP response times.

This paper presents an alternative approach for the analysis of EM field by a rotating body with FDTD method and Overset Grid Generation method, considering Lorentz transformation for the higher velocity cases. This approach has been previously proposed for the case of linear and uniformly moving body against/to the incident wave. Here, the approach is expanded to a rotating body which includes the interpolation technique in the space and time increment along the cylindrical rotation at the fixed axis. First, the grid size ratios between the main mesh and the sub-mesh are studied. The appropriate choice of the grid size ratio is obtained. Then, the modulations of the EM field when the incident wave hits the rotating body in high velocity cases are analyzed. The relationship of the phase shift and the velocity is further observed. The observed EM fields are compared with the theoretical results and achieved good agreements in high relative velocities. The assessment of the numerical errors in a rotating environment is also highlighted. This numerical approach may have numerous situations to which it can be applied. This may be involved with the design of rotating devices such as microactuator, commutator and others.

In this paper, we propose a geographic location-based distributed routing (GDR) system. The GDR system provides information lookup based on latitude and longitude coordinates. Each node of the GDR system utilizes the coordinates as an identifier (ID), and manages an overlay routing table. An ID is generated to reflect the geographical location without using Space Filling Curve (SFC). The ID is in cartesian format (x, y), which represents the longitude x and latitude y. In a system with N nodes, each node has a routing table of size log N and a search is possible in O(log N). We evaluate the routing performance of GDR and other systems based on Chord, Kademlia and CAN. We show that in both the ID is in cartesian format and the ID is generated by using SFC, GDR, Chord and Kademlia have the same mean and the same variance of the path length, while the mean and the variance of the relay length of GDR are smaller than those of Chord and Kademlia. Furthermore, while GDR and CAN have the same mean and the same variance of the relay length, the mean and the variance of the path length of GDR are smaller than those of CAN.

The deployment of hybrid wide-area OpenFlow networks is essential for the gradual integration of OpenFlow technology into existing wide-area networks. Integration is necessary because it is impractical to replace such wide-area networks with OpenFlow-enabled ones at once. On the other hand, the design, deployment, and operation of such hybrid OpenFlow networks are often conducted intuitively without in-depth technical considerations. In this paper, we systematically discuss the technical aspects of the hybrid architecture for OpenFlow networks based on our experience so far in developing wide-area hybrid OpenFlow networks on JGN2plus and JGN-X, which are nation-wide testbed networks in Japan. We also describe the design and operation of RISE (Research Infrastructure for large-Scale network Experiments) on JGN-X, whose objective is to support a variety of OpenFlow network experiments.

The conventional Equal Gain Transmission and Maximum Ratio Combining (EGT/MRC) requires nonlinear optimization to find the optimal beamforming vector at the receiver. This study shows that the optimal beamforming vector can be easily formed by the geometrical concepts. Accordingly, a novel transmission/reception scheme, called the Scalar Equal Gain Transmission and Generalized Maximum Ratio Combining (SEGT/GMRC), is presented and examined. The Monte-Carlo simulations validate the theory and it is shown that the optimal beamforming vector formed by SEGT is the same as the one determined by the nonlinear optimizer. The closed-form analytical error performance of the SEGT/GMRC scheme is also derived for multiple input single output (MISO) communications. This study also introduces the new limited-feedback geometrical codebooks, called the Quantized Equal gain (QE) codebooks, which can be easily installed as symbol mappers. These codebooks are based on quantized SEGT/GMRC, which eliminates the need for any iterative searching scheme, such as exhaustive search at the receiver. The minimum amount of feedback bits depends on the modulation scheme, where a general M-PSK modulation requires at least log2M bits per quantized phase angle. It is also shown that BPSK modulation requires at least 2 bits per quantized phase angle for near-optimal performance.

The overall performance of multi-hop cognitive radio networks (MHCRNs) can be improved significantly by employing the diversity of orthogonal licensed channels in underlay fashion. However, the mutual interference between secondary links and primary links and the congestion due to the contention among traffic flows traversing the shared link become obstacles to this realizing technique. How to control congestion efficiently in coordination with power and spectrum allocation optimally in order to obtain a high end-to-end throughput is motivating cross-layer designs for MHCRNs. In this paper, by taking into account the problem of joint rate adaption, power control, and spectrum allocation (JRPS), we propose a new cross-layer optimization framework for MHCRNs using orthogonal frequency division multiple access (OFDMA). Specifically, the JRPS formulation is shown to be a mix-integer non-linear programming (MINLP) problem, which is NP-Hard in general. To solve the problem, we first develop a partially distributed algorithm, which is shown to converge to the global optimum within a reasonable time interval. We next propose a suboptimal solution which addresses the shortcomings of the first. Using numerical results, we finally demonstrate the efficiency of the proposed algorithms.

As one innovative research that heavily depends on the network virtualization for its realization and deployment on an Internet-scale, we propose an approach to utilize user resources in information-centric network (ICN). We try to fully benefit from the in-network cache that is one attractive feature of ICN by expanding the in-network cache indirectly based on the user resources. To achieve this, in this paper, we focus on how to encourage users to contribute their resources in ICN. Through simulations, we examine a feasibility of our approach and an effect of user participation on the content distribution performance in ICN. We also briefly discuss how the network virtualization technique can be utilized for our research in terms of its evaluation and deployment.

This paper presents a new simple method for reducing mutual coupling between dual-element microstrip antennas (MSAs) for bistatic radar using a wave absorber. The two elements are closely placed on a substrate by the distance of λ0/4 through the wall-shaped absorber. The height and width of the absorber were optimized for minimum mutual coupling with the electromagnetic simulator. It was found that less than -60 dB minimum mutual coupling can be achieved by the impedance matching of the absorber in a near field. The influence for the reflection characteristics from the absorber is small enough, and the reduction of the antenna gain is only 1.1 dB. The rate of the lost power characteristics showed that the absorption improves the mutual couplings. Then the proposed structure for a practical configuration was investigated. The measurement results of the optimized structure tallied well with the simulation results.

Ultra wideband radar is one of the most promising techniques for non-invasive imaging in a dielectric medium, which is suitable for both medical screening and non-destructive testing applications. A novel imaging method for such an application is proposed in this brief paper, which has been extended from the advanced range points migration method to a multi-static observation model with circular arrays. One notable feature of this method is that it is applicable to either arbitrary dielectric or internal object shapes, and it can also expand the reconstructible image region compared with that obtained using the mono-static model by employing received signals after penetrating various propagation paths in dielectric medium. Numerical results for the investigation of an elliptical object, surrounded by a random dielectric surface, show the remarkable advantages of the proposed method with respect to image expansion.

Three synchronization issues, i.e., phase, frequency, and symbol time, have to be properly controlled to achieve distributed beamforming gain. In orthogonal frequency division multiplexing (OFDM) systems, frequency offset in cooperating signals is more important than other synchronization issues since it results in SNR degradation as well as inter-carrier interference (ICI). In this paper, the impact of frequency offset in distributed beamforming is analyzed for OFDM systems. ICI resulting from frequency offset between cooperating signals is also investigated and approximated. Performance degradation due to frequency offset is shown with various numbers of cooperating signals and offset values. We show that frequency offset between cooperating signals is critical in OFDM systems since it leads to interference from the other subcarriers as well as power loss in the desired signal.