The three beam-switched top-loaded antenna is suited to be applied to a wireless local area network to switch the radiation pattern by arranging several unidirectional antennas. In this paper, a three beam switched top loaded monopole antenna is proposed to realize its small size and planar structure. Three top loaded monopole antennas are arranged around a parasitic hexagonal patch at intervals of 120 degrees. The feed element is selected by the switching device to switch the radiation pattern. This antenna allows for reduction in the number of elements as well as downsizing. The front to back ratio (F/B) becomes 23 dB by selecting suitable parameters.

This paper addresses the variation of the attenuation characteristics of the Specific Absorption Rate (SAR) in a lossy medium as a function of the distance between an antenna and the medium with different EM-source sizes. Analysis and measurements were performed using a dipole antenna at 900 MHz and a COST244 cubic phantom. From this, an empirical equation has been derived, representing the attenuation characteristics of the SAR. The equation takes into consideration an energy loss due to the spatial spread of electromagnetic waves. In the case where an antenna is placed more than λ/2π away from the medium, the attenuation characteristics of the SAR are those obtained from plane waves in the lossy medium. In the case where a half-wavelength dipole antenna is located close to the medium, at a distance of less than λ/2π, the attenuation characteristics of the SAR are calculated from an equation that includes a loss caused by the spread of energy as a cylindrical wave. Moreover, when the length of antenna is short, it is found that a spatial attenuation factor appropriate to a spherical wave should be taken into account.

This paper attempts to use the polarimetric correlation coefficient for extraction of the polarimetric features of the urban areas and the natural distributed areas from Polarimetric Synthetic Aperture Radar (POLSAR) data. There is a possibility that the polarimetric correlation coefficient can reveal various scattering mechanisms of terrains based on the reflection symmetry property. In order to verify the capability of polarimetric correlation coefficient, we examined the behavior of this coefficient of the urban areas and the natural distributed areas with respect to the several polarimetric scattering models in the linear and circular polarization bases, and the difference of the polarimetric scattering characteristics between these two areas was derived. It was confirmed that the polarimetric correlation coefficient is useful to extract the polarimetric features from the actual L-band and X-band POLSAR data.

This paper presents a dual-band mixer equipped with a dual-band load using current combine technique to minimize chip area by sharing inductors for each frequency band. A systematic design methodology for the current combine load based on parasitic effect considerations is also developed. By following the proposed design procedure, the load inductance and combine capacitance for the dual-band mixer can be easily determined. A 2.4/5.2-GHz CMOS mixer design has been implemented to demonstrate the feasibility of the design technique.

A novel image enhancement algorithm that can efficiently detect a small target of panoramic infrared (IR) imagery is proposed. Image enhancement is the first step for detecting and recognizing a small target in the IR imagery. The essence of the proposed algorithm is to utilize the independent histogram equalization (HE) separately over two sub-images obtained by decomposing the given image through the statistical hypothesis testing (SHT). Experimental results show that the proposed algorithm has better discrimination and lower false alarm rate than the conventional algorithms.

Packet-recognition/code-acquisition (PR/CA) is one of the most important issues in packet communication systems. In a CDMA Unslotted ALOHA system, Multiple Access Interference (MAI) may bring about errors in PR/CA. The MAI mainly stems from already recognized packets and newly arriving packets under the execution of PR/CA. This characteristic of asynchronous transmission in CDMA U-ALOHA systems implies that only one or a few packets arrive at the receiver within a short interval of a execution. Furthermore, newly arriving packets are recognized and code-acquired by using a short preamble part. Consequently, the MAI from the packets under the execution of the PR/CA will be small. Focusing on that point, this paper proposes applying the IC scheme in order to suppress the MAI from the already recognized and code-acquired packets. A performance evaluation demonstrates that such an application is valid due to the small amount of MAI from the packets under the execution of PR/CA. In addition, we demonstrates that the scheme reduces false recognition rather than mis-recognition. Such a scheme improves the performance of not only PR/CA, but also the throughput.

In this paper, a new error concealment algorithm for MPEG-4 object-based video is presented. The algorithm consists of a feature matching step to identify temporally corresponding features between video frames and an affine parameter estimation step to find the motion of the feature points. In the feature matching step, an efficient cross-radial search (CRS) method is developed to find the best matching points. In the affine parameter estimation step, a non-iterative least squares estimation algorithm is developed to estimate the affine parameters. An attractive feature of the algorithm is that the shape data and texture data are handled by the same method. Unlike previous methods, this unified approach works for the case where the video object undergoes a drastic movement, such as a sharp turn. Experimental results show that the proposed algorithm performs much better than previous approaches by about 0.3-2.8 dB for shape data and 1.6-5.0 dB for texture data.

In order to achieve omni-directional coverages on base station antennas for fixed wireless access systems (FWA), a TM01 mode conical horn with 4.6λ aperture size was employed as a feed horn for an axisymmetrical reflector antenna. Here, a shaped dielectric lens was inserted in the conical horn so as to achieve low sidelobe radiation characteristics. However, it was pointed out that radiation pattern shaping ability was degraded in this small lens antenna. In this paper, deteriorations of aperture distributions in a shaped lens are clarified through FDTD calculations. Severe phase delays are shown in the aperture phase distributions. A novel lens shaping method of compensating the phase delays is developed. Aperture distributions and radiation patterns of the corrected lens are estimated through FDTD calculations. Satisfactory uniform phase distributions in aperture distributions and low sidelobe radiation patterns are ensured.

Numerical Stability of the Finite Element/Finite Difference Time Domain Hybrid algorithm is dependent on the hybridization mechanism adopted. A framework is developed to analyze the numerical stability of the hybrid time marching algorithm. First, the global iteration matrix representing the hybrid algorithm following different hybridization schemes is constructed. An analysis of the eigenvalues of this iteration matrix reveals the stability performance of the algorithm. Thus conclusions on the performance with respect to numerical stability of the different schemes can be arrived at. Further, numerical experiments are carried out to verify the conclusions based on the stability analysis.

In QoS routing, load balancing routing algorithm for long-lived traffic can be used efficiently to minimize the number of routing update, control traffic overhead and computational overhead which mainly come from network traffic fluctuation. The congestion problem from short-lived traffic is however difficult to handle. A simple and robust algorithm is needed for short-lived traffic to reduce the traffic loss probability. In the paper, we proposed a new hybrid routing schemes for short-lived traffic and long-lived traffic. An alternate routing algorithm is applied for the short-lived traffic when congestion occurs. We restricted the number of additional hops in the path to minimize the negative effect of alternate routing algorithm. The proposed algorithm reduces packet loss probability from 0.6% to 1.7% under various link utilizations. We also compare our proposed algorithms with and without crank-back.

This paper presents new encoding methods for the binary genetic algorithm (BGA) and new converting methods for the real-coded genetic algorithm (RCGA). These methods are developed for the specific case in which some parameters have to be searched in wide ranges since their actual values are not known. The oversampling effect which occurs at large values in the wide range search are reduced by adjustment of resolutions in mantissa and exponent of real numbers mapped by BGA. Owing to an intrinsic similarity in chromosomal operations, the proposed encoding methods are also applied to RCGA with remapping (converting as named above) from real numbers generated in RCGA. A simple probabilistic analysis and benchmark with two ill-scaled test functions are carried out. System identification of a simple electrical circuit is also undertaken to testify effectiveness of the proposed methods to real world problems. All the optimization results show that the proposed encoding/converting methods are more suitable for problems with ill-scaled parameters or wide parameter ranges for searching.

The recognition limit of luminance difference in the human visual system (HVS) has not been studied systematically. In this paper, surround adapted Weber-Fechner fraction is calculated based on the crispening effect. It is found that surround adapted fractions have reduced to 1/3 of the traditional Weber-Fechner fractions. As compared with Breitmeyer's experiments, the presented result is a reasonable one. It can be used as some guide to design the digital display system when a designer needs to decide bit count of digital signal in considering of the limit of brightness level, and as the inspection tool of display manufacturing of brightness smear, defect, and so on.

We present a method of stabilizing a class of nonlinear systems which are not necessarily feedback linearizable. First, we show a new way of constructing a diffeomorphism to transform a class of nonlinear systems to the feedback linearized form with perturbation. Then, we propose a semi-globally stabilizing control law for nonlinear systems that are connected by a chain of integrator perturbed by arbitrary nonlinear terms. In our approach, we have flexibility in choosing a diffeomorphism where the system is not restricted to involutivity and this leads to reduction in computational burden and flexibility in controller design.

We present a simple bit allocation scheme based on adaptive coding for MIMO-OFDM (Multiple Input Multiple Output - Orthogonal Frequency Division Multiplexing) systems with V-BLAST (Vertical-Bell laboratories LAyered Space-Time) detector. The proposed scheme controls the code rate of the channel coding and assigns the same modulation and coding to the set of selected sub-channels, which greatly reduces the feedback burden while achieving good performance. Simulation results show that the proposed scheme with minimal feedback provides significant performance improvement over other systems.

Recently, efficient algorithms have been proposed for finding all characteristic curves of one-port piecewise-linear resistive circuits. Using these algorithms, a middle scale one-port circuit can be represented by a piecewise-linear resistor that is neither voltage nor current controlled. In this letter, an efficient algorithm is proposed for finding all dc operating points of piecewise-linear circuits containing such neither voltage nor current controlled resistors.

We propose a rapid and reliable signal acquisition scheme for UWB (Ultra Wide Band) systems in indoor wireless environments. The proposed scheme is a two-step search with different thresholds and search windows, where each step utilizes the single-dwell search with the bit reversal. Simulation results show that the proposed scheme for the UWB signals can achieve significant reduction of the required mean acquisition time as compared to other schemes including general double-dwell search scheme for various threshold levels. Furthermore, it is also observed that the proposed scheme can achieve much faster and reliable signal acquisition as the first threshold is larger in noisy environments.

In VDSM era, crosstalk is becoming a more and more vital factor in high performance VLSI designs, making noise mitigation in early design stages necessary. In this paper, we propose an effective algorithm optimizing crosstalk under congestion constraint in the layer assignment stage. A new model for noise severity measurement is developed where wire length is used as a scale for the noise immunity, and both capacitive and inductive coupling between sensitive nets are considered. We also take shield insertion into account for further crosstalk mitigation. Experimental results show that our approach could efficiently reduce crosstalk noise without compromising congestion compared to the algorithm proposed in [1].

A folded loop antenna for handsets has already been introduced and shown as one of balance-fed antennas for handsets, which is very effective to mitigate the antenna performance degradation due to the body effect. In order to meet the requirements for the latest handsets such as low profile and small size, a folded loop antenna is modified. The antenna, which is possibly built in the handsets, is newly proposed. Low profile and small size is achieved by consisting of the half of low profile folded loop antenna, which has a structure folded loop elements sideways so that the antenna can be placed on the ground plane (GP). In the analysis, the electromagnetic simulator based on the FDTD (Finite Difference Time Domain) method is used and the design parameters useful in practical operation are found. The electromagnetic simulator based on the Method of Moment (MoM) is used to calculate the current distribution on the antenna element and the GP. An example of low profile and small size antenna which has wideband characteristics are designed based on these parameters, and the antenna characteristics such as VSWR, the current distributions and the radiation patterns are compared with Planar Inverted-F Antenna (PIFA), which is one of conventional built-in antennas for handset. As a result, it has been confirmed that the physical volume of the antenna, which has been introduced here, becomes smaller than that of PIFA. In addition, the radiation efficiency of these antennas is measured and the results are compared with each other.

This paper describes a system architecture along with signal processing technique which allows a reduction in the complexity of a 3.1-10.6 GHz Ultra-Wideband radio. The proposed system transmits passband pulses using a pulser and antenna, and the receiver front-end down-converts the signal frequency by subsampling, thus, requiring substantially less hardware than a traditional narrowband approach. However, the simplified receiver front end shows a high sensitivity to timing offset. By proposing an analytic signal processing technique, the vulnerability of timing offset is mitigated; furthermore, a time resolution finer than the sampling period is achieved, which is useful for locationing or ranging applications. Analysis and simulations of system specifications are also provided in this paper.

In this paper we show that an outerplanar graph G with maximum degree at most 3 has a 2-D orthogonal drawing with no bends if and only if G contains no triangles. We also show that an outerplanar graph G with maximum degree at most 6 has a 3-D orthogonal drawing with no bends if and only if G contains no triangles.