In this paper, we propose a medium access control (MAC) protocol for multimedia code division multiple access (CDMA) communications. In the proposed protocol, a base station (BS) estimates the instantaneous number of simultaneously transmitted packets in the future slots with exploiting a stochastic property of traffic. In order to carry out this estimation, we employ an adaptive algorithm. We evaluate the performance of the proposed protocol by comparing that with two different cases. One is no estimation case and the other is perfect estimation case. From these results, we clarify the advantage of the proposed MAC protocol.

A wireless communications system with a transmission speed of 18 Mbit/s is presented using the 2.4 GHz ISM band. This system employs the Carrier Frequency Offset-Spread Spectrum (CFO-SS) scheme and the Dual-Polarization Staggered Transmission (DPST) scheme. The 18 Mbit/s CFO-SS system (named CFO-SS18) was developed and its performance evaluated in fields. In this paper, the detailed operating principle of CFO-SS and DPST schemes, together with the specifications and structures of CFO-SS18, are presented. Results of indoor and field tests obtained by using CFO-SS18 are also presented.

Using the finite-difference time-domain method, we evaluated the performance of apertured near-field fiber probes with a double-tapered structure, which have exhibited, in recent experiments, a much higher collection efficiency of localized light in comparison with single-tapered probes. We clarified that this high collection efficiency could be attributed to the shortening of the cutoff region, and the efficient coupling to the guiding mode of the optical fiber. By reproducing the experimental results in terms of the spatial resolution and the collection efficiency as a function of the aperture diameter, our calculation was confirmed to be valid and useful for the design of probes in a variety of applications.

This paper develops a modular synthesis algorithm for timed circuits that is dramatically accelerated by partial order reduction. This algorithm synthesizes each module in a hierarchical design individually. It utilizes partial order reduction to reduce the state space explored for the other modules by considering a single interleaving of concurrently enabled transitions. This approach better manages the state explosion problem resulting in a more than 2 order of magnitude reduction in synthesis time. The improved synthesis time enables the synthesis of a larger class of timed circuits than was previously possible.

In this paper, we propose and describe a new synchronizer for the FFT timing applicable to multi-carrier spread-spectrum (MC-SS) communication systems. The performance of the synchronizer is evaluated in terms of false- and miss-detection probabilities in the presence of additive white Gaussian noise (AWGN) and Rayleigh fading.

A broadband RF front-end having a direct conversion architecture has been developed. The RF front-end consists of two broadband quadrature mixers, a multi-band local oscillator, and a broadband low-noise variable gain amplifier (LNVGA). The mixer achieves broadband characteristics through the incorporation of an in-phase power divider and a 45-degree power divider. The in-phase power divider achieves broadband characteristics through the addition of a compensation capacitor. The 45-degree power divider achieves broadband phase characteristics through the addition of a compensation capacitor and a compensation resistor. The local oscillator, which is composed of two VCOs, two frequency dividers, and four switches, can cover three systems including one FDD system. The LNVGA achieves its broadband characteristics without the use of reactance elements, such as inductors or capacitors. In a trial demonstration, when the RF frequency was between 900 MHz and 2.5 GHz, the mixer for a demodulator experimentally demonstrated an amplitude balance of less than 1.6 dB and a quadrature phase error of less than 3 degrees. When the RF frequency was between 900 MHz and 2.5 GHz, the mixer for a modulator demonstrated an image ratio of less than -30 dBc. The local oscillator demonstrated multi-band characteristics, which are able to cover the target frequencies for three systems (PDC, PHS, 2.4 GHz WLAN). From 900 MHz to 2.5 GHz, the amplifier shows a noise figure of less than 2.1 dB and a gain of 28 1.6 dB.

We fabricated the first Fe-coated fiber probe for magneto-optical applications. In order to improve the optical confinement capability, we used a double-layer structure, with a thin coating of Au. The double-layer structure consisted of 50-nm-thick Fe and 50-nm-thick Au. A probe-to-probe experiment confirmed that the fabricated fiber probe had an effective optical confinement capability for optical near-field measurement.

We calculated linear and nonlinear responses of a Kerr nonlinear microsphere sandwiched by two prisms using the excitation of whispering gallery modes due to near-field coupling. As numerical calculations, the finite-difference time-domain method that takes into account the Kerr nonlinear effect was used. We dealt with two types of spheres, i.e., the Kerr-material sphere and the dielectric sphere coated by the Kerr material. It was found that the optical switching phenomena are induced in such spheres. The switching results from the fact that the variations of the refractive index of the nonlinear spheres affect the excitation condition of the whispering gallery modes.

We investigated the truncated convolutional code with the characteristics of a block code for block-based communication systems. Three truncation methods (direct truncation, tail-terminating, and tail-biting method) were introduced by other researchers. Each of the three methods has a weakness: the direct truncation method decreases the minimum distance, the tail-terminating method uses tail bits, and the tail-biting method can only be applied by using a complicated decoder. Although the tail-biting method gives a better BER performance than the other two methods, we cannot apply the tail-biting method in all situations. Occasionally, the tail-biting convolutional code does not exist. Wang et al. presented two necessary conditions for the existence of the tail-biting convolutional code of the rate-1/2 recursive systematic convolutional code. In this paper, we analyze the encoder of the convolutional code as a linear time invariant system, and present two theorems and six corollaries on the existence of the tail-biting convolutional code. These existence conditions are adaptable to all convolutional codes. In the communication system using the truncated convolutional code, these results are applicable to determining the truncation method.

We describe in this paper our experience of developing a large-scale, highly distributed multi-agent system using wireless-networked sensors. We provide solutions to the problems of localization (position estimation) and dynamic, real-time mobile object tracking, which we call PET problems for short, using wireless sensor networks. We propose system architectures and a set of distributed algorithms for organizing and scheduling cooperative computation in distributed environments, as well as distributed algorithms for localization and real-time object tracking. Based on these distributed algorithms, we develop and implement a hardware system and software simulator for the PET problems. Finally, we present some experimental results on distance measurement accuracy using radio signal strengths of the wireless sensors and discuss future work.

Fiber-optic access system integration is the key to providing various kinds of services to home users. The combination of ATM- and SCM-PON systems is essential to support a high-speed data service and analog/digital video distribution services. From this viewpoint, a frequency-division- multiplexing technique for digital baseband and subcarrier multiplexed signals is required to achieve system integration. However, system integration for these two access systems has not been fully investigated yet. The SCM-PON system, which uses a super wideband optical FM converter, will enable these two different kinds of access system (ATM and SCM) to be integrated. In this paper, we describe experimentally obtained results for frequency- division-multiplexed signals consisting of digital baseband and subcarrier- multiplexed signals. The experiments were carried out using a 622-Mb/s baseband signal and an FM-converted signal containing AM and 64QAM signals. The experimental results reveal that the inter-channel interference between the digital baseband and FM-converted signals restricts the number of subcarriers for AM and 64QAM. With an intermediate frequency of 3 GHz for the FM-converted signal, an FDM signal consisting of 622-Mb/s baseband, 30 carriers of 64QAM, and 11 carriers of AM was successfully transmitted.

Autonomous distributed manufacturing systems (ADMS) consist of multiple intelligent components with each component acting according to its own judgments. The ADMS objective is to realize more agile and adaptive manufacturing systems. This paper presents the introduction of context-dependent agents (CDAs) in ADMS that switch strategies depending on system conditions to achieve better performance than can be realized by agents that use the same strategies under all system conditions. For the real-time job scheduling problem, the paper presents a basic CDA architecture and the results of an extensive empirical evaluation of its performance relative to other rule-based schemes based on several common indices for real-time dispatch.

The one-sample locally optimum rank detector test statistics for composite signals in multiplicative and signal-dependent noise are obtained. Since the one-sample locally optimum rank detector makes use of the sign statistics of observations as well as the rank statistics, both 'even' and 'odd' score functions have to be considered. Although the one-sample locally optimum rank detector requires two score functions while the two-sample detector requires only one score function, the one-sample detector requires fewer calculations since it has to rank fewer observations.

In this paper, we propose a new job scheduling method for distributed parallel systems that can simultaneously achieve two main goals of the job scheduling in those systems: to minimize the execution time of a parallel job without disturbing the execution of the other jobs. We try to achieve those goals by introducing a new scheduler, called active scheduler, that dynamically controls the priority of parallel programs and balances the workload of host computers depending on the status of the underlying runtime environment. We implemented a prototype system of the scheduler to evaluate its effectiveness. The result of experiments implies that the overhead of introducing the active scheduler is at most 15% of the original execution time, and it is in fact effective to adjust the execution of parallel programs to an actual distributed environment in which many users execute their jobs simultaneously.

Intelligent transport systems (ITS) are promising systems to give excellent solutions for many problems that we face in transport today. Not only road-to-vehicle communications but also inter-vehicle communications in ITS are expected to become popular in the future. On the other hand, an intra-vehicle communication network should be supported by multimedia information according to the explosive expansion of the Internet use and the like. An inexpensive transmission medium and transceiver becomes indispensable in such in-vehicle local area network (LAN) for multimedia information as these must handle full-motion video signals, without any electromagnetic interference. We have proposed on-board network architecture based on optical P1394b to realize effective inter-vehicle communications and enable all equipment which freely add and remove to the intra-vehicle network. And according to the proposed architecture, we have developed a 500-Mbit/s low-cost optical transceiver for the intra- and inter-vehicle communication network using a commercially available plastic clad fiber. An LD for the compact disk drive and a large area photodiode were adopted as low-cost and high-speed optical devices, and a logic direct driving type simple circuit having temperature compensation function was developed. Simple assembly technologies such as plastic molding and optical element press-fitting were also developed for mounting to reduce assembly cost. The total cost of the fabricated optical transceiver can be reduced less than 2/3, comparing with that of conventional one. We have performed transmission experiments and vibration tests using our optical transceivers that are mounted in on-board elements and connected to the on-board network, and have confirmed these stable operations. Experimental results show our proposed architecture and fabricated optical transceiver can play a key role in the intra- and inter-vehicle communication network.

In this paper, we clarify the properties of the contract net protocol based on its formal specification. To specify the contract net protocol, we propose a formal specification method for an agent system. In this method, agents are modeled as communicating finite state machines. To deal with the behavior of agents and its time passage explicitly, we incorporate the concept of time into the communicating finite state machine. The contract net protocol is specified based on the specification method proposed in this paper. From the specification, we analyze the possibility about agent deadlock and its avoidance solution.

An efficient algorithm is proposed for finding all dc solutions of piecewise-linear (PWL) circuits. This algorithm is based on a powerful test (termed the LP test) for nonexistence of a solution to a system of PWL equations in a given region using the dual simplex method. The proposed algorithm also uses a special technique that decreases the number of regions on which the LP test is performed. By numerical examples, it is shown that the proposed algorithm could find all solutions of large scale problems, including those where the number of variables is 500 and the number of linear regions is 10500, in practical computation time.

In this letter, we propose a two-stage object-based error-concealment technique for MPEG-2 video transmitted in a burst-packet-loss environment. A burst packet loss typically destroys a large area of MPEG-2 coded video. In the first stage, the missing area is intra-picture estimated and concealed in terms of a region-based approach. In the second stage, irregular-moving objects with respect to the background are identified and compensated from the predictive picture. As compared with conventional concealment approaches, the proposed method achieves better PSNR performance and reduces the visual artifacts.

The two-sample locally optimum rank detector test statistics for composite signals in additive, multiplicative, and signal-dependent noise are obtained in this letter. Compared with the structure of the one-sample locally optimum rank detector, that of the two-sample locally optimum rank detector is shown to be simpler, although it needs more computations. It is known that there is a trade-off of computational complexity and structural simplicity between the one- and two-sample detectors.

This letter presents text-independent speaker identification results for telephone speech. A speaker identification system based on Karhunen-Loeve transform (KLT) derived from codebook design using genetic algorithm (GA) is proposed. We have combined genetic algorithm (GA) and the vector quantization (VQ) algorithm to avoid typical local minima for speaker data compression. Identification accuracies of 91% were achieved for 100 Mandarin speakers.