A technique for reducing fiber four-wave mixing (FWM) in multichannel transmissions is proposed. Birefringent elements are inserted on the way of transmission lines. Due to the effect of birefringent elements on the polarization states, the effective crosstalk due to FWM is expected to be 3/16 of that in the worst case in conventional systems.

Asymptotic bounds are considered for unidirectional byte error-correcting codes. Upper bounds are developed from the concepts of the Singleton, Plotkin, and Hamming bounds. Lower bounds are also derived from a combination of the generalized concatenated code construction and the Varshamov-Gilbert bound. As the result, we find that there exist codes of low rate better than those on the basis of Hamming distance with respect to unidirectional byte error-correction.

A new Viterbi algorithm with adaptive path reduction method is presented. The proposed system consists of the pre-decoder and reduced path Virerbi decoder. The predecoder separates the mixed channel noise from the received sequence. The number of errors in the pre-decoded error sequence is counted and the path reduction is implemented by the number of errors in pre-decoded error sequence. The path reduction is implemented as a function of channel condition because the errors in the pre-decoded error sequence can be considered as the channel error sequence. Due to the reduction of the path, the number of ACS (add compare select) operations can be reduced, which occupies the dominant part in Viterbi decoding. The ACS reduction ratio for the proposed system achieves up to 30% for the case of (2, 1, 2) Ungerboeck code without degradation of the error performance.

A new arithmetic multiple-valued algebra with functional completeness is introduced. The algebra is called Neuro-Algebra for it has very similar formula and architecture to neural networks. Two canonical forms of multiple-valued functions of this Neuro-Algebra are presented. Since the arithmetic operations of the Neuro-Aglebra are basically a weighted-sum and a piecewise linear operations, their implementations are very simple and straightforward. Furthermore, the multiple-valued networks based on the Neuro-Algebra can be trained by the traditional back-propagation learning algorithm directly.

Fiber-optic passive double star (PDS) network is described as an access network for microcellular radio communication systems. The intrinsic characteristics of the PDS network, reduction in the optical fiber count and flexible access capability, are examined. A unit cell structure is introduced which enables the PDS network to be effectively incorporated into the access portion of microcellular radio communication systems. The reduced total fiber length in the unit cell structure based on the PDS network is discussed in comparison with the conventional architecture. Calculations show that there is an optimum splitting ratio that minimizes the total fiber length. When the microcell radius and service area radius are 100m and 10km, respectively, the total fiber length of the PDS network is reduced to only about 9% of that of the conventional single star (SS) network for a splitting ratio of 34. Resource sharing and handover between microcells in a unit cell are performed by using the dynamic channel allocation function of the PDS system. Substantial performance improvement for loaded traffic can be obtained by resource sharing. When the splitting ratio is 32, the available traffic of a base station (BS) increases from 0.9 [erl/BS] to 3.4 [erl/BS] by adopting dynamic channel allocation for the lost call probability of 0.01.

We have developed a new HIGFET structure achieving an extremely high K-value of 13.3 S/Vcm with a gate length of 0.15 µm. Self-aligned ion implantation is excluded to suppress a short-channel effect. An i-GaAs cap layer and an n+-GaAs contact layer are employed to reduce source resistance. The threshold voltage shift is as small as 50 mV when the gate length is reduced from 1.5 µm to 0.15 µm. Source resistance is estimated to be 53 mΩcm. We have also developed a new fabrication process that can achieve a shorter gate length than the minimum size of lithography. This process utilizes an SiO2 sidewall formed on the n+-GaAs contact layer to reduce the gate length. A gate length of 0.15 µm can be achieved using 0.35 µm lithography.

We propose a decoding algorithm for the t-EC/AUED code proposed by Böinck and Tiborg. The proposed algorithm also reveals some remarkable properties of the code.

Redundancy is introduced by sampling a bandlimited signal at a higher rate than the Nyquist rate. In the cases of erasures due to fading or jamming, the samples are discarded. Therefore, what we get at the output of the receiver is a set if nonuniform samples obtained from a uniform sampling process with missing samples. As long as the rate of nonuniform samples is higher than the Nyquist rate, the original signal can be recovered with no errors. The sampling theorem can be shown to be equivalent to the fundamental theorem of information theory. This oversampling technique is also equivalent to a convolutional code of infinite constraint length is the Field of real numbers. A DSP implementation of this technique is through the use of a Discrete Fourier Transform (DFT), which happens to be equivalent to block codes in the field of real numbers. An iterative decoder has been proposed for erasure and impulsive noise, which also works with moderate amount of additive random noise. The iterative method is very simple and efficient consisting of modules of Fast Fourier Transforms (FFT) and Inverse FFT's. We also suggest a non-linear iterative method which converges faster than the successive approximation. This iterative decoder can be implemented in a feedback configuration. Besides FFT, other discrete transforms such as Discrete Cosine Transform, Discrete Sine Transform, Discrete Hartley Transform, and Discrete Wavelet Transform are used. The results are comparable to FFT with the advantage of working in the field of real numbers.

This paper reports performance improvement in an optical fiber feeder for microcellular mobile radio systems. A low noise optical receiver using a transformer resonant circuit is described. With this receiver, CNR degradation due to receiver noise is suppressed to less than 0.9dB. Furthermore, two novel techniques, the use of a multiple-LD transmitter and automatic LD input level control, are proposed. The multiple-LD transmitter increases transmitter output power and reduces the transmitter noise. With a dual-LD transmitter, it is possible to increase the optical loss margin by 3.1dB, which corresponds to transmission length expansion of 6.2km, or to improve the received CNR by 2.8dB, which enables communication range expansion. Automatic LD input level control, which optimizes LD input level according to the received radio power, can expand the actual dynamic range of the up link.

Corresponding to the development of B-ISDN, integrated services for data, voice, etc. are imperatively required for the so called third generation wireless communication networks. In this paper, I-ISMA (Idle Signal Multiple Access for Integrated services) is proposed to transmit integrated voice and data traffic from dispersed terminals to a base station. In the system, data packets and the first packets of talkspurts of conversational speeches are transmitted using ISMA protocol over a shared channel while subsequent packets of talkspurts are sent with time reservation technique. The channel capacity of I-ISMA is evaluated and compared with that of PRMA. The region in which I-ISMA has larger capacity than PRMA is figured out. Generally speaking, I-ISMA has larger capacity than PRMA when the duration for transmitting and detecting an idle signal is not too long and the channel is not too congested by the reserved voice transmissions. When we concern real time voice transmission, delay is one of the most important performance measures. Only is a qualitative discussion on delay performance given here. The quantitative evaluation is obtained by the dynamic analysis in our succeeding paper.

In this paper, a definitce relation between the TSP's optimal solution and the attracting region in the parameters space of TSP's energy function is discovered. An many attracting region relating to the global optimal solution for TSP is founded. Then a neural network algorithm with the optimized parameters by using Orthogonal Array Table Method is proposed and used to solve the Travelling Salesman Problem (TSP) for 30, 31 and 300 cities and Map-coloring Problem (MCP). These results are very satisfactory.

The value distribution of the partial autocorrelation of periodic sequences is important for the evaluation of the sequence performances when sequences of long period are used. But it is difficult to find the exact value distribution of the autocorrelation in general. Therefore we derived some properties of the partial autocorrelation for binary m-sequences which may be used to find the exact value distribution.

This paper tends to analyze the trends of the research in logic synthesis. The first part is devoted to an expertise of the efficiency of factorization methods developed during the last decade and to the proposal of dedicated methods for complex logic blocks. The second part shows the importance of Binary Decision Diagrams as representation of Boolean functions. Their use in the technology mapping phase of multiplexor-based FPGAs in an industrial tool is taken as illustration.

This paper first proposes a fast fingerprint identification method based on a weighted-mean of binary image, and further investigates optimization of the weights. The proposed method uses less computer memory than the conventional pattern matching method, and takes less computation time than both the feature extraction method and the pattern matching method. It is particularly effective on the fingerprints with a small angle of inclination. In order to improve the identification precision of the proposed basic method, three schemes of modifying the proposed basic method are also proposed. The performance of the proposed basic method and its modified schemes is evaluated by theoretical analysis and computer experiment using the fingerprint images recorded from a fingerprint read-in device. The numerical results showed that the proposed method using the modified schemes can improve both the true acceptance rate and the false rejection rate with less memory and complexity in comparison with the conventional pattern matching method and the feature extraction method.

We introduce automatic procedures for generating and verifying sufficient correctness properties of synchronous processors. The targeted circuits are synchronous array processors designed from localized, highly regular data dependency graphs (DDGs). The specification, in the form of a DDG, is viewed as a maximally parallel circuit. The implementation, on the other hand, is a (partially) serialized circuit. Since these circuits are not equivalent from an automata-theoretic viewpoint, we define the correctness of the implementation against the specification to mean that a certain relation (called the β-relation) holds between the two. We use a compositional approach to decouple the verification of the control circuitry from that of the data path, thereby gaining efficiency. An array processor in isolation may not have a definite flow of control, because control may reside in the data stream. Therefore, for the purpose of verification, we construct an auxiliary machine, which keeps a timing reference and generates control signals abstracted from a typical data stream. Sufficient correctness conditions are expressed as past-tense computation tree logic (CTL) formulae and verified by CTL model-checking procedures. Experimental results of the verification of a matrix multiplication array and a Gaussian elimination array are presented.

In this paper, a new method of synthesizing multi-level logic circuits directly from binary decision diagrams (BDDs) is proposed. In the simple multiplexer implementation, the depth of the synthesized circuit was always O (n), where n is the number of input variables. The new synthesis method attempts to reduce the depth of circuits. The depth of the synthesized circuits is O (log n log w) where w is the maximum width of given BDDs. The synthesized circuits are 2-rail-input 2-rail-output logic circuits. The circuits have good testability; it is proved that the circuits are robustly path-delay fault testable and also totally self-checking for single stuck-at faults.

Fiber-optic microcellular system has been studied actively as an excellent system for solving the equipment cost problems in microcellular systems. However, the occurrence of intermodulation distortion (IMD) arising from the nonlinearity of the laser diode used for E/O conversion which degrades the transmission quality is a serious problem in this system. In this paper, we propose a new frequency switching/IM3 reduction method, which dynamically reassigns the carrier frequencies to minimize the carrier to IMD power ratio under the hostile environment with time-varying received carrier strength, and analyze the performance improvements by the proposed method. The improvements obtained both for the worst value of the overall CNR and for the overall CNR in a specific user are numerically made clear. It is also shown that if the interval between frequency reassignings is set less than one second, a sufficient improvement in the overall CNR is achievable.

Reducing communication complexity is a viable approach to multilevel logic synthesis. A communication complexity based approach was proposed previously. In the previous works, only disjoint input decomposition was considered. However, for certain types of circuits, the circuit size can be reduced by using overlapped decomposition. In this paper, we consider overlapped decompositions. Some design issues for overlapped decompositions such as detecting globals" and deriving subfunctions are addressed. Moreover, the Decomposition Don't Cares (DDC) is considered for improving the decomposed results. By using these techniques together, the area and delay of circuits can be further minimized.

This paper reviews fiber optic link techniques from the microwave and millimeter-wave transmission point of view. Several architectures of fiber optic links are reviewed. The application of MMIC technologies to the optical receivers are discussed and 26-GHz subcarrier transmission experimental works are described. Novel fiber optic links which utilize both optical device nonlinearities and microwave functional circuits are also reviewed. A system concept of millimeter-wave cellular radio using fiber optic links is finally discussed.

Atmospheric optical communication (AOC) system using subcarrier PSK modulation is proposed and its superiority to OOK modulation in the presence of scintillation is discussed theoretically. An experimental AOC setup with a subcarrier modulated by 155.52(Mb/s) DPSK at light wave-length λ=0.83(µm) over an 1.8(km) outdoor path is employed to show the performance. Theoretical and experimental results are compared under scintillation in clear weather and a good agreement is observed. Finally, AOC systems using subcarrier M-ary PSK and multiple subcarriers are proposed and discussed.