As the number of electronic control units (ECUs) or sensors connected to a controller area network (CAN) bus increases, so does the bus load. When a CAN bus is overloaded by a large number of ECUs, both the waiting time and the error probability of the data transmission are increased. Because the duration of the data transmission is proportional to the frame length, it is desirable to reduce the CAN frame length. In this paper, we present an improved CAN data-reduction (DR) algorithm to reduce the amount of data to be transferred in the CAN frame length. We also implement the data reduction algorithm using the CANoe software, and measure the CAN bus load using a CANcaseXL device. Experimental results with a Kia Sorento vehicle indicate that we can obtain additional average compression ratio of 11.15% with the proposed method compared with the ECANDC algorithm. By using the CANoe software, we show that the average message delay is within 0.10ms and the bus load can be reduced by 23.45% with 20 ECUs using the proposed method compared with the uncompressed message.

Frequencies around 300GHz offer extremely broad atmospheric transmission window with relatively low losses of up to 10dB/km and can be regarded as the ultimate platform for ultrahigh-speed wireless communications with near-fiber-optic data rates. This paper reviews technical challenges and recent advances in integrated circuits targeted at communications using these and nearby “terahertz (THz)” frequencies. Possible new applications of THz wireless links that are hard to realize by other means are also discussed.

In this paper, we propose two secure multiuser multiple-input multiple-output (MIMO) transmission approaches based on interference alignment (IA) in the presence of an eavesdropper. To deal with the information leakage to the eavesdropper as well as the interference signals from undesired transmitters (Txs) at desired receivers (Rxs), our approaches aim to design the transmit precoding and receive subspace matrices to minimize both the total inter-main-link interference and the wiretapped signals (WSs). The first proposed IA scheme focuses on aligning the WSs into proper subspaces while the second one imposes a new structure on the precoding matrices to force the WSs to zero. In each proposed IA scheme, the precoding matrices and the receive subspaces at the legitimate users are alternatively selected to minimize the cost function of a convex optimization problem for every iteration. We provide the feasible conditions and the proofs of convergence for both IA approaches. The simulation results indicate that our two IA approaches outperform the conventional IA algorithm in terms of the average secrecy sum rate.

In this letter, we propose an algorithm for the 2-dimensional (2D) direction of arrival (DOA) estimation of noncircular coherently distributed (CD) sources using the centrosymmetric array. For a centrosymmetric array, we prove that the angular signal distributed weight (ASDW) vector of the CD source has a symmetric structure. To estimate azimuth and elevation angle, we perform a 2D searching based on generalized ESPRIT algorithm. The significant superiority of the proposed algorithm is that, the 2D central directions of CD sources can be found independently of deterministic angular distributed function (DADF). Simulations results verify the efficacy of the proposed algorithm.

Card-based protocols enable us to easily perform cryptographic tasks such as secure multiparty computation using a deck of physical cards. Since the first card-based protocol appeared in 1989, many protocols have been designed. A protocol is usually described with a series of somewhat intuitive and verbal descriptions, such as “turn over this card,” “shuffle these two cards,” “apply a random cut to these five cards,” and so on. On the other hand, a formal computational model of card-based protocols via abstract machine was constructed in 2014. By virtue of the formalization, card-based protocols can be treated more rigorously; for example, it enables one to discuss the lower bounds on the number of cards required for secure computations. In this paper, an overview of the computational model with its applications to designing protocols and a survey of the recent progress in card-based protocols are presented.

A lot of encryption and watermarking schemes have been developed as countermeasures to protect copyrights of broadcast or multicast content from malicious subscribers (traitors) that make pirate receivers (PRs) to use the content illegally. However, solo use of these schemes does not necessarily work well. Traitor tracing encryption schemes are a type of broadcasting encryption and have been developed for broadcasting and multicast services. There are multiple distinct decryption keys for each encryption key, and each service subscriber is given a unique decryption key. Any subscriber that redistributes his or her decryption key to a third party or who uses it and maybe other keys to make a PR can be identified with using the tracing algorithm of the scheme that is used by the services. However, almost all previous schemes have the same weakness; that is, they are vulnerable to an attack (content comparison attack). This is a concrete example such that solo use of the scheme does not work well. The attack involves multiple distinct decryption keys and a content-data comparison mechanism. We have developed a method, called complementary traitor tracing method (CTT), that makes traitor tracing schemes secure against content comparison attacks. It makes it impossible for PRs to distinguish ordinary content data from test data and makes traitor tracing schemes effective against all PRs, even those with multiple distinct decryption keys. CTT is made with a simple combination of schemes that are absolutely necessary. It makes broadcasting or multicast services secure.

In this paper, we provided a new variant of Weil pairing on a family of genus 2 curves with the efficiently computable automorphism. Our pairing can be considered as a generalization of the omega pairing given by Zhao et al. We also report the algebraic cost estimation of our pairing. We then show that our pairing is more efficient than the variant of Tate pairing with the automorphism given by Fan et al. Furthermore, we show that our pairing is slightly better than the twisted Ate pairing on Kawazoe-Takahashi curve at the 192-bit security level.

IDMs are getting more effective and secure with biometric recognition and more privacy-preserving with advanced cryptosystems. In order to meet privacy and security needs of an IDM, the cryptographic background should rely on reliable random number generation. In this study, a Biometric Random Number Generator (BRNG) is proposed which plays a crucial role in a typical cryptosystem. The proposed novel approach extracts the high-frequency information in biometric signal which is associated with uncertainty existing in nature of biometrics. This bio-uncertainty, utilized as an entropy source, may be caused by sensory noise, environmental changes, position of the biometric trait, accessories worn, etc. The filtered nondeterministic information is then utilized by a postprocessing technique to obtain a random number set fulfilling the NIST 800-22 statistical randomness criteria. The proposed technique presents random number sequences without need of an additional hardware.

Wireless caching is one of the promising technologies to mitigate the traffic burden of cellular networks and the large cost of deploying a higher volume of wired backhaul by introducing caching storage. In the manner of “cutting” wired equipments, all types of vehicles can be readily leveraged as serving access points with caching storage, where their moving nature should be taken into account to improve latency and data throughput. In this paper, we consider a mobility-aware vehicular caching which has a role in offloading delay-tolerable contents from cellular networks. We first clarify the influence of mobility in cellular caching networks, then set the mobility-aware optimization problem of vehicular caching to carry on delay-tolerable contents. Trace-driven numerical results based on rural and urban topographies show that, in presence of individual demand for delay-tolerable contents, the proposed vehicular caching scheme enhances the quality-of-service (QoS) (maximally twofold) relying on the contents delivery being centrally or distributedly controlled.

It is expected that a large number of different objects, such as sensor devices and consumer electronics, will be connected to future networks. For such networks, we propose a name resolution method for directly specifying a condition on a set of attribute-value pairs of real-world information without needing prior knowledge of the uniquely assigned name of a target object, e.g., a URL. For name resolution, we need an algorithm to find the target object(s) satisfying a query condition on multiple attributes. To address the problem that multi-attribute searching algorithms may not work well when the number of attributes (i.e., dimensions) d increases, which is related to the curse of dimensionality, we also propose a probabilistic searching algorithm to reduce searching time at the expense of a small probability of false positives. With this algorithm, we choose permutation pattern(s) of d attributes to use the first K (K « d) ones to search objects so that they contain relevant attributes with a high probability. We argue that our algorithm can identify the target objects at a false positive rate less than 10-6 and a few percentages of tree-searching cost compared with a naive d-dimensional searching under a certain condition.

A broadband approach to estimate the relative permittivity of dielectric cuboids has been proposed for materials of weak frequency dispersive characteristic. Our method involves a numerical iterative scheme with appropriate initial values carefully selected to solve for the relative permittivity in a wide range of frequencies. Good agreements between our method and references have been observed for nylon and acrylic samples. An applicable range relation between the minimal thickness, the frequency range and the dielectric property of the material has also been discussed.

In the evolution of wireless networks such as wireless sensor networks, mobile ad-hoc networks, and delay/disruption tolerant networks, the Store-Carry-Forward (SCF) message relaying paradigm has been commonly featured and studied with much attention. SCF networking is essential for offsetting the deficiencies of intermittent and range limited communication environments because it allows moving wireless communication nodes to act as “mobile relay nodes”. Such relay nodes can store/carry/process messages, wait for a better opportunity for transmission, and finally forward the messages to other nodes. This paper starts with a short overview of SCF routing and then examines two SCF networking scenarios. The first one deals with large content delivery across multiple islands using existing infrastructural transportation networks (e.g., cars and ferries) in which mobility is uncontrollable from an SCF viewpoint. Simulations show how a simple coding technique can improve flooding-based SCF. The other scenario looks at a prototype system of unmanned aerial vehicle (UAV) for high-quality video surveillance from the sky in which mobility is partially controllable from an SCF viewpoint. Three requisite techniques in this scenario are highlighted - fast link setup, millimeter wave communications, and use of multiple links. Through these examples, we discuss the benefits and issues of the practical use of SCF networking-based systems.

Optical label processing is expected to reduce power consumption in label switching network nodes. Previously, we proposed passive waveguide circuits for the recognition of BPSK labels with a theoretically infinite contrast ratio. The recognizable label number was limited to four and eight for 4-bit and 8-bit BPSK labels, respectively. In this paper, we propose methods to increase the recognizable label number. The proposed circuits can recognize eight and sixteen labels of 4-bit BPSK codes with a contrast ratio of 4.00 and 2.78, respectively. As 8-bit BSPK codes, 64, 128, and 256 labels can be recognized with a contrast ratio of 4.00, 2.78, and 1.65, respectively. In recognition of all encoded labels, that is, 16 and 256 labels for 4-bit and 8-bit BPSK labels, a reference signal is employed to identify the sign of the optical output signals. The effect of phase deviation and loss along the optical waveguides of the devices is also discussed.

Many hemodialysis patients undergo plasitc surgery to form the arterio-venous fistula (AVF) in their forearm to improve the vascular access by shunting blood flows. The issue of AVF is the stenosis caused by the disturbance of blood flows; therefore the auscultation system to assist the stenosis diagnosis has been developed. Although the system is intended to be used as a steady monitoring for stenosis assessment, its efficiency was not always high because it cannot estimate where the stenosis locates. In this study, for extracting and estimating the stenosis signal, the shunt murmurs captured by many microphones were decomposed by the principal component analysis (PCA). Furthermore, applying the hierarchical categorization of the recursive subdivision self-organizing map (rs-SOM), the modelling of the stenosis signal was proposed to realise the effective stenosis assessment. The false-positive rate of the stenosis assessment was significantly reduced by using the improved auscultation system.

All the existing sender-based message logging (SBML) protocols share a well-known limitation that they cannot tolerate concurrent failures. In this paper, we analyze the cause for this limitation in a unicast network environment, and present an enhanced SBML protocol to overcome this shortcoming while preserving the strengths of SBML. When the processes on different nodes execute a distributed application together in a broadcast network, this new protocol replicates the log information of each message to volatile storages of other processes within the same broadcast network. It may reduce the communication overhead for the log replication by taking advantage of the broadcast nature of the network. Simulation results show our protocol performs better than the traditional one modified to tolerate concurrent failures in terms of failure-free execution time regardless of distributed application communication pattern.

Many researchers studied computationally-secure (verifiable) secret sharing schemes which distribute multiple secrets with a bulletin board. However, the security definition is ambiguous in many of the past articles. In this paper, we first review existing schemes based on formal definitions of indistinguishability of secrets, verifiability of consistency, and cheater-detectability. And then, we propose a new secret sharing scheme which is the first scheme with indistinguishability of secrets, verifiability, and cheater-detectability, and allows to share secrets with arbitrary access structures. Further, our scheme is provably secure under well known computational assumptions.

We propose a framework to perform auto-radiometric calibration in photometric stereo methods to estimate surface orientations of an object from a sequence of images taken using a radiometrically uncalibrated camera under varying illumination conditions. Our proposed framework allows the simultaneous estimation of surface normals and radiometric responses, and as a result can avoid cumbersome and time-consuming radiometric calibration. The key idea of our framework is to use the consistency between the irradiance values converted from pixel values by using the inverse response function and those computed from the surface normals. Consequently, a linear optimization problem is formulated to estimate the surface normals and the response function simultaneously. Finally, experiments on both synthetic and real images demonstrate that our framework enables photometric stereo methods to accurately estimate surface normals even when the images are captured using cameras with unknown and nonlinear response functions.

In this paper, we identify the tradeoff between security and reliability in the amplify-and-forward (AF) distributed beamforming (DBF) cooperative network with K untrusted relays. In particular, we derive the closed-form expressions for the connection outage probability (COP), the secrecy outage probability (SOP), the tradeoff relationship, and the secrecy throughput. Analytical and simulation results demonstrate that increasing K leads to the enhancement of the reliability performance, but the degradation of the security performance. This tradeoff also means that there exists an optimal K maximizing the secrecy throughput.

In this paper, an analysis of the basic process of a class of interactive-graph-cut-based image segmentation algorithms indicates that it is unnecessary to construct n-links for all adjacent pixel nodes of an image before calculating the maximum flow and the minimal cuts. There are many pixel nodes for which it is not necessary to construct n-links at all. Based on this, we propose a new algorithm for the dynamic construction of all necessary n-links that connect the pixel nodes explored by the maximum flow algorithm. These n-links are constructed dynamically and without redundancy during the process of calculating the maximum flow. The Berkeley segmentation dataset benchmark is used to prove that this method can reduce the average running time of segmentation algorithms on the premise of correct segmentation results. This improvement can also be applied to any segmentation algorithm based on graph cuts.

A Reed-Solomon (RS) decoder is designed based on the pipelined recursive Euclidean algorithm in the key equation solution. While the Euclidean algorithm uses less Galois multipliers than the modified Euclidean (ME) and reformulated inversionless Berlekamp-Massey (RiBM) algorithms, division between two elements in Galois field is required. By implementing the division with a multi-cycle Galois inverter and a serial Galois multiplier, the proposed key equation solver architecture achieves lower complexity than the conventional ME and RiBM based architectures. The proposed RS (255,239) decoder reduces the hardware complexity by 25.9% with 6.5% increase in decoding latency.