This paper deals with a beamforming and cell ID detection technique for a mobile station (MS) with multiple antenna arrays in millimeter wave (mm-wave) cellular communication systems. Multiple antenna arrays, required to cover the entire space around the MS, can be used to estimate the direction of arrivals (DoAs) and cell IDs, form beams in the direction of DoAs, select a serving cell in a cooperative manner, and improve BER performance by signal combining. However, a signal may enter the overlapped region formed by two adjacent arrays in the MS, resulting in a double-counting problem during the cell searching period. In this paper, a beamforming and cell detection technique without double-counting is proposed to handle this problem, and they are evaluated by simulation in a simple scenario of an mm-wave cellular system with spatial channel model (SCM).

Analysis of security governed by dynamics of power systems, which we refer to as dynamic security analysis, is a primary but challenging task because of its hybrid nature, that is, nonlinear continuous-time dynamics integrated with discrete switchings. In this paper, we formulate this analysis problem as checking the reachability of a mathematical model representing dynamic performances of a target power system. We then propose a computational approach to the analysis based on the so-called RRT (Rapidly-exploring Random Tree) algorithm. This algorithm searches for a feasible trajectory connecting an initial state possibly at a lower security level and a target set with a desirable higher security level. One advantage of the proposed approach is that it derives a concrete control strategy to guarantee the desirable security level if the feasible trajectory is found. The performance and effectiveness of the proposed approach are demonstrated by applying it to two running examples on power system studies: single machine-infinite system and two-area system for frequency control problem.

Patch clamp measurement technique is one of the most important techniques in the field of electrophysiology. The elucidation of the channels, nerve cells, and brain activities as well as contribution of the treatment of neurological disorders is expected from the measurement of ion current. A current-to-voltage converter, which is the front end circuit of the patch clamp measurement system is fabricated using 0.18µm CMOS technology. The current-to-voltage converter requires a resistance as high as 50MΩ as a feedback resistor in order to ensure a high signal-to-noise ratio for very small signals. However, the circuit becomes unstable due to the large parasitic capacitance between the poly layer and the substrate of the on-chip feedback resistor and the instability causes the peaking at lower frequency. The instability of a current-to-voltage converter with a high-resistance as a feedback resistor is analyzed theoretically. A compensation circuit to stabilize the amplifier by driving the N-well under poly resistor to suppress the effect of parasitic capacitance using buffer circuits is proposed. The performance of the proposed circuit is confirmed by both simulation and measurement of fabricated chip. The peaking in frequency characteristic is suppressed properly by the proposed method. Furthermore, the bandwidth of the amplifier is expanded up to 11.3kHz, which is desirable for a patch clamp measurement. In addition, the input referred rms noise with the range of 10Hz ∼ 10kHz is 2.09 Arms and is sufficiently reach the requirement for measure of both whole-cell and a part of single-channel recordings.

The new generation video standard, i.e., High-efficiency Video Coding (HEVC), shows a significantly improved efficiency relative to the last standard, i.e., H.264. However, the quad tree structured coding units (CUs), which are adopted in HEVC to improve compression efficiency, cause high computational complexity. In this study, a novel fast algorithm is proposed for CU partition in intra coding to reduce the computational complexity. A rough minimum depth prediction of the largest CU method and an early termination method for CU partition based on the total coding bits of the current CU are employed. Many approaches have been proposed to reduce the encoding complexity of HEVC, but these methods do not use the total coding bits of the current CU as the main basis for judgment to judge the CU complexity. Compared with the reference software HM16.6, the proposed algorithm reduces encoding time by 45% on average and achieves an approximately 1.1% increase in Bjntegaard delta bit rate and a negligible peak signal-to-noise ratio loss.

A novel circularly and linearly polarized loop antenna is presented. A simple loop configuration, twisted like a cross shape, has achieved radiating wide beam circular polarization simultaneously with linear polarization in two close bands. This cross configuration brings good circular polarization to a loop antenna because it uses the transmission line mode of a folded dipole antenna. For these reasons, the antenna is named the Cross Spiral Antenna (CSA). In this paper, a basic structure and the principle of the CSA radiating circular polarization with one port feeding is explained. The prototype CSA, which is tuned to around 1.57GHz and 1.6GHz, is tested for verifying the effectiveness of the suggested antenna configuration.

One of the patterns that the design of parallel file systems has to solve stems from the difficulty of handling the metadata-intensive I/O generated by parallel applications accessing a single large directory. We demonstrate a middleware design called SFS to support existing parallel file systems for distributed and scalable directory service. SFS distributes directory entries over data servers instead of metadata servers to offer increased scalability and performance. Firstly, SFS exploits an adaptive directory partitioning based on extendible hashing to support concurrent and unsynchronized partition splitting. Secondly, SFS describes an optimization based on recursive split-ordering that emphasizes speeding up the splitting process. Thirdly, SFS applies a write-optimized index structure to convert slow, small, random metadata updates into fast, large, sequential writes. Finally, SFS gracefully tolerates stale mapping at the clients while maintaining the correctness and consistency of the system. Our performance results on a cluster of 32-servers show our implementation can deliver more than 250,000 file creations per second on average.

Recent small cube satellites use higher frequency bands such as Ku-band for higher throughput communications. This requires high-frequency link in an earth radio station as well. As one of the solutions, we propose usage of bidirectional radio-on-fiber link employing a wavelength multiplexing scheme. It was numerically shown that the response linearity of the electro-absorption modulator integrated laser (EML) is sufficient and that the spurious emissions are lower enough or can be reduced by the radio-frequency filters. From the frequency response and the single-sideband phase noise measurements, the EML was proved to be used in a radio-on-fiber system of the cube satellite earth station.

Recently, H. Liu et al. [H. Liu, M. Liang, and H. Sun, A secure and efficient certificateless aggregate signature scheme, IEICE Transactions on Fundamentals of Electronics Communications and Computer Sciences, vol.E97-A, no.4, pp.991-915, 2014] proposed a new certificateless aggregate signature (CLAS) scheme and demonstrated that it was provably secure in the random oracle model. However, in this letter, we show that their scheme cannot provide unforgeability, i.e., an adversary having neither the user's secret value nor his/her partial private key can forge a legal signature of any message.

Virtualization is no longer an emerging research area since the virtual processor and memory operate as efficiently as the physical ones. However, I/O performance is still restricted by the virtualization overhead caused by the costly and complex I/O virtualization mechanism, in particular by massive exits occurring on the guest-host switch and redundant processing of the I/O stacks at both guest and host. A para-virtual device driver may reduce the number of exits to the hypervisor, whereas the network stacks in the guest OS are still duplicated. Previous work proposed a socket-outsourcing technique that bypasses the redundant guest network stack by delivering the network request directly to the host. However, even by bypassing the redundant network paths in the guest OS, the obtained performance was still below 60% of the native device, since notifications of completion still depended on the hypervisor. In this paper, we propose vCanal, a novel network virtualization framework, to improve the performance of network access in the virtual machine toward that of the native machine. Implementation of vCanal reached 96% of the native TCP throughput, increasing the UDP latency by only 4% compared to the native latency.

A simplified circuit has been utilized for fast computation of the current flowing in the cross-point memory array. However, the circuit has a constraint in that the selected cell is located farthest from current drivers so as to estimate the current degraded by metal wire resistance. This is because the length of the current path along the metal wire varies with the selected address in the cross-point memory array. In this paper, a new simplified circuit is proposed for calculating the current at every address in order to take account of the metal wire resistance. By employing the Monte Carlo simulation to solve the proposed simplified circuit, the current distribution across the array is obtained, so that failure rates of read disturbance and write error are estimated precisely. By comparing the conventional and the proposed simplified circuits, it was found that the conventional simplified circuit estimated optimistic failure rates for read disturbance and for write error when the wire resistance was prominent enough as a parasitic resistance.

Determination of wordlength is essential for designing digital circuits because the wordlength affects system performance, hardware size, and power consumption. Variable wordlength methods that a system dynamically and effectively changes the wordlength depending on surrounding environments have been studied for power reduction in wireless systems. The conventional variable wordlength methods induce communication performance degradation when compared with a floating-point representation in time-varying fading channels. This paper discusses rapid wordlength control on packet basis and proposes a new method based on monitoring subcarrier SNRs in an OFDM receiver. The proposed method can estimate signal quality accurately and can decrease the wordlength decision errors. The simulation results have indicated that the proposed method shows better PER performance compared with the conventional methods.

Time synchronization is of paramount importance in wireless sensor networks (WSNs) due to the inherent distributed characteristics of WSNs. Border surveillance WSNs, especially, require a highly secure and accurate time synchronization scheme to detect and track intruders. In this paper, we propose a Secure and Efficient Time synchronization scheme for Border surveillance WSNs (SETB) which meets the requirements of border surveillance WSNs while minimizing the resource usage. To accomplish this goal, we first define the performance and security requirements for time synchronization in border surveillance WSNs in detail. Then, we build our time synchronization scheme optimized for these requirements. By utilizing both heterogeneous WSNs and one-way key chains, SETB satisfies the requirements with much less overhead than existing schemes. Additionally, we introduce on-demand time synchronization, which implies that time synchronization is conducted only when an intruder enters the WSN, in order to reduce energy consumption. Finally, we propose a method of deploying time-source nodes to keep the synchronization error within the requirement. Our analysis shows that SETB not only satisfies the performance and security requirements, but also is highly efficient in terms of communication and computation overhead, thus minimizing energy consumption.

This paper presents new Binary Converters (or current-mode compressors) by the usage of carbon nanotube field effect transistors. The new designs are made of three parts: 1) the input currents which are converted to voltage; 2) threshold detectors; and 3) the output current flow paths. In addition, an 8×8-bit multiplier is considered as a bench mark to estimate their efficiency degrees. The first approach is based on high-order Binary Converters, and the second one is only composed of 4BCs and Half Adders.

Although many 3D structures have been solved for proteins to date, functions of some proteins remain unknown. To predict protein functions, comparison of local structures of proteins with pre-defined model structures, whose functions have been elucidated, is widely performed. For the comparison, the root mean square deviation (RMSD) has been used as a conventional index. In this work, adaptive deviation was incorporated, along with Bregmann Divergence Regularized Machine, in order to detect analogous local structures with such model structures more effectively than the conventional index.

Circular Polarized Optical OFDM (CPO-OFDM) is a system that applies OFDM to optical wireless communications. This system separates OFDM signals into positive and negative signals and converts these signals into left-handed and right-handed polarization and then multiplexes the resulting polarized signals. In CPO-OFDM, the separated signals must be combined at the receiver. Then, as a noise-reduction method, the comparison method compares the signal amplitudes of the positive and negative signals and uses the signal having the larger amplitude as the received signal. However, if we use the comparison method when the received signals have background light, the combined signals are distorted. In the present paper, we herein report a method by which the receiver estimates the amplitude of the background light and then removes the background light, which is easily accomplished. Furthermore, we also report a theoretical method for analyzing the bit error rate (BER). We develop a closed form of the theoretical formula for the BER in an additive white Gaussian noise (AWGN) channel. By using this formula and through numerical integration, we investigate the theoretical BER for a scintillation channel. We compare the results of the theoretical analysis with those of the simulations. As a result, the theoretical BER is generally coincident with the BER obtained through simulation. Even if we use the closed-form formula, we can derive the BER with sufficient accuracy.

A high frequency approximation method is proposed to obtain the scattering from rectangular dielectric cuboids. Our formulation is based on a Kirchhoff type aperture integration of the equivalent current sources over the surface of the scattering bodies. The derived formulae have been used to get the radar cross section of cuboids, and the results are compared with those by other methods, such as physical optics, geometrical theory of diffraction, the HFSS simulation and measurements. Good agreement has been observed to confirm the validity of our method.

It has been reported that a left-handed waveguide can be constituted using cutoff TE10 mode of rectangular waveguide. Because the cutoff TE10 mode shows effectively negative permittivity, the left-handed mode propagates by adding series capacitance in the form of short- or open-stubs. This paper suggests a constitution method of left-handed waveguides using cutoff TM mode. In this case, the cutoff TM mode shows effectively negative permeability. Therefore, a left-handed waveguide can be constituted by adding parallel inductance. In this paper, two types of the left-handed waveguides are designed using circular TM01 mode and rectangular TM11 mode, and the dispersion characteristics are numerically investigated. The validity of the constituting principle is confirmed by an experiment.

Two spanning trees T1,T2 of a graph G = (V,E) are independent if they are rooted at the same vertex, say r, and for each vertex v ∈ V, the path from r to v in T1 and the path from r to v in T2 have no common vertices and no common edges except for r and v. In general, spanning trees T1,T2,…,Tk of a graph G = (V,E) are independent if they are pairwise independent. A graph G = (V,E) is called a 2-chordal ring and denoted by CR(N,d1,d2), if V = {0,1,…,N-1} and E = {(u,v)|[v-u]N = 1 or [v-u]N = d1 or [v-u]N = d2, 2 ≤ d1 < d2 ≤ N/2}. CR(N,d1,N/2) is 5-connected if N ≥ 8 is even and d1 ≠ N/2-1. We give an algorithm to construct 5 independent spanning trees of CR(N,d1,N/2),N ≥ 8 is even and 2 ≤ d1 ≤ ⌈N/4⌉.

A 12×16-element corporate-feed slot array is presented. The corporate-feed circuit for the 12×16-elemtent array consists of cross-junctions and asymmetric T-junctions, whereas the conventional one is limited to arrays of 2m×2n slots by its use of symmetric T-junctions. Simulations of the 12×16-element array show a 7.6% bandwidth for reflection less than -14dB. A 31.7-dBi gain with an antenna efficiency of 82.6% is obtained at the design frequency of 61.5GHz. The 12×16-element array is fabricated by diffusion bonding of laminated thin metal plates. Measurements indicate 31.1-dBi gain with 71.9% antenna efficiency at 61.5GHz.

To investigate electrostatic discharge (ESD) immunity testing for wearable electronic devices, the worst scenario i.e., an ESD event occurs when the body-mounted device approaches a grounded conductor is focused in this paper. Discharge currents caused by air discharges from a charged human through a hand-held metal bar or through a semi-sphere metal attached to the head, arm or waist in lieu of actual wearable devices are measured. As a result, it is found that at a human charge voltage of 1kV, the peak current from the semi-sphere metal is large in order of the attachment of the waist (15.4A), arm (12.8A) and head (12.2A), whereas the peak current (10.0A) from the hand-held metal bar is the smallest. It is also found that the discharge currents through the semi-sphere metals decrease to zero at around 50ns regardless of the attachment positions, although the current through the hand-held metal bar continues to flow at over 90ns. These discharge currents are further characterized by the discharge resistance, the charge storage capacitance and the discharge time constant newly derived from the waveform energy, which are validated from the body impedance measured through the hand-held and body-mounted metals. The above finding suggests that ESD immunity test methods for wearable devices require test specifications entirely different from the conventional ESD immunity testing.