In this letter, we consider a problem of global stabilization of a class of approximately feedback linearized systems. We propose a new nonlinear control approach which includes a nonlinear controller and a Lyapunov-based design method. Our new nonlinear control approach broadens the class of systems under consideration over the existing results.

In this paper, we propose a network-aware overlay multicast (NAOM) technique for large data dissemination in a well-managed overlay network. To improve the throughput, NAOM utilizes forward-only hosts; these hosts participate in the overlay network but are not members of the multicast. With the inclusion of the forward-only hosts, data slices can detour bottleneck links and more resources can be used to build efficient multicast trees. Large data are divided into fixed-size slices, and the slices are delivered simultaneously to multicast receivers along the multiple multicast trees. We model the problem of building efficient multicast trees with the inclusion of forward-only hosts. The problem is an NP-hard problem, and we introduce a polynomial time heuristic algorithm. Furthermore, we propose a dynamic scheduling scheme for the transfer of data along the evaluated multicast trees. Our experimental results in a real network environment show an improvement of the throughput but at the cost of additional resource consumption of forward-only nodes.

In this paper, we analyze the extended real-time Polling Service (ertPS) algorithm in IEEE 802.16e systems, which is designed to support Voice-over-Internet-Protocol (VoIP) services with data packets of various sizes and silence suppression. The analysis uses a two-dimensional Markov Chain, where the grant size and the voice packet state are considered, and an approximation formula for the total throughput in the ertPS algorithm is derived. Next, to improve the performance of the ertPS algorithm, we propose an enhanced uplink resource allocation algorithm, called the e 2rtPS algorithm, for VoIP services in IEEE 802.16e systems. The e 2rtPS algorithm considers the queue status information and tries to alleviate the queue congestion as soon as possible by using remaining network resources. Numerical results are provided to show the accuracy of the approximation analysis for the ertPS algorithm and to verify the effectiveness of the e 2rtPS algorithm.

Printed circuit boards (PCBs) driven by a connected feed cable are considered to be one of the main sources of the electromagnetic interference (EMI) from electronic devices. In this paper, a method for predicting the electromagnetic (EM) radiation from a PCB driven by a connected feed cable at up to gigahertz frequencies is proposed and demonstrated. The predictive model is based on the transmission line theory and current- and voltage-driven CM generation mechanisms with consideration of antenna impedance. Frequency responses of differential-mode (DM) and common-mode (CM) currents and far-electric field were investigated experimentally and with finite-difference time-domain (FDTD) modeling. First, the dominant component in total EM radiation from the PCB was identified by using the Source-Path-Antenna model. Although CM can dominate the total radiation at lower frequencies, DM is the dominant component above 3 GHz. Second, the method for predicting CM component at lower frequencies is proposed. And its validity was discussed by comparing FDTD calculated and measured results. Specifically, the relationship between the CM current and the terminating resistor was focused as important consequence for the prediction. Good agreement between the measured and predicted results shows the validity of the predicted results. The proposed model can predict CM current with sufficient accuracy, and also identify the primary coupling-mechanism of CM generation. Then far-electric field was predicted by using the proposed method, and it was demonstrated that outline of the frequency response of the undesired EM radiation from the PCB driven by the connected feed cable can be predicted with engineering accuracy (within 6 dB) up to 18 GHz. Finally, as example of application of equivalent circuit model to EMC design, effect of the width of the ground plane was predicted and discussed. The equivalent circuit model provides enough flexibility for different geometrical parameters and increases our ability to provide insights and design guidelines.

The IEEE 802.11 standard has been extensively deployed all over the world. Many studies have been put on its performance, especially throughput. Most research focused on the analysis of saturated throughput, but non-saturated situation is more usual in practice. By extending a saturation throughput model, a concise and novel model is proposed in this paper, which can be used to analyze both saturated and non-saturated conditions. Moreover, the model can also deal with the heterogeneous condition, which allows stations to have different traffic. Different access mechanisms and packet payloads are used in simulation to validate it, and the results show that the model is accurate.

Analog multipliers are one of the most important building blocks in analog signal processing circuits. The performance with high linearity and wide input range is usually required for analog four-quadrant multipliers in most applications. Therefore, a highly linear and wide input range four-quadrant CMOS analog multiplier using active feedback is proposed in this paper. Firstly, a novel configuration of four-quadrant multiplier cell is presented. Its input dynamic range and linearity are improved significantly by adding two resistors compared with the conventional structure. Then based on the proposed multiplier cell configuration, a four-quadrant CMOS analog multiplier with active feedback technique is implemented by two operational amplifiers. Because of both the proposed multiplier cell and active feedback technique, the proposed multiplier achieves a much wider input range with higher linearity than conventional structures. The proposed multiplier was fabricated by a 0.6 µm CMOS process. Experimental results show that the input range of the proposed multiplier can be up to 5.6Vpp with 0.159% linearity error on VX and 4.8Vpp with 0.51% linearity error on VY for 2.5V power supply voltages, respectively.

To reduce RFID tag identification delay, we propose a novel Dynamic Splitting protocol (DS) which is an improvement of the Query tree protocol (QT). DS controls the number of branches of a tree dynamically. An improved performance of DS relative to QT is verified by analytical results and simulation studies.

Interconnection networks play a crucial role in the performance of massively parallel computers. Hierarchical interconnection networks provide high performance at low cost by exploring the locality that exists in the communication patterns of massively parallel computers. A Tori connected Torus Network (TTN) is a 2D-torus network of multiple basic modules, in which the basic modules are 2D-torus networks that are hierarchically interconnected for higher-level networks. This paper addresses the architectural details of the TTN and explores aspects such as node degree, network diameter, cost, average distance, arc connectivity, bisection width, and wiring complexity. We also present a deadlock-free routing algorithm for the TTN using four virtual channels and evaluate the network's dynamic communication performance using the proposed routing algorithm under uniform and various non-uniform traffic patterns. We evaluate the dynamic communication performance of TTN, TESH, MH3DT, mesh, and torus networks by computer simulation. It is shown that the TTN possesses several attractive features, including constant node degree, small diameter, low cost, small average distance, moderate (neither too low, nor too high) bisection width, and high throughput and very low zero load latency, which provide better dynamic communication performance than that of other conventional and hierarchical networks.

Codebook based multiple-input multiple-output (MIMO) precoding can significantly improve the system spectral efficiency with limited feedback and has been accepted as one of the most promising techniques for the Evolved UTRA (E-UTRA). Compared with single-user (SU) MIMO, multi-user (MU) MIMO can further improve the system spectral efficiency due to increased multi-user diversity gain. MU-MIMO is preferred for the case of a large number of users,when the total feedback overhead will become a problem. In order to reduce the feedback overhead, feedback of single channel quality indicator (CQI), e.g. rank 1 CQI, is required in E-UTRA currently. The main challenge is how to obtain CQIs of other ranks at Node B for rank adaptation with single CQI feedback. In this paper, an adaptive CQI update scheme at Node B based on statistical characteristics of CQI of various ranks is proposed. To further increase the accuracy of CQI at Node B for data transmission, an adaptive CQI feedback scheme is then proposed in which single CQI with the rank same as previously scheduled is fed back. Simulation results show that our proposed CQI update scheme can achieve 2.5-5% gain compared with the conventional method with fixed backoff. Moreover, with the proposed adaptive feedback scheme, 20-40% performance gain can be obtained and the performance can approach the upper bound.

Code division multiple access (CDMA) technique is used widely since it can flexibly support multi-rate multi-media services by changing the number of orthogonal spreading codes. In this paper, we present a new adaptive code assignment algorithm, which consists of three steps: reserved-space, improved-crowded-first-space, and multi-code combination to fully use the code space. Compared with the existing algorithms, the proposed algorithm can avoid the code blocking problem and lower its total blocking probability while keeping its computational complexity relatively low. Simulation results show that increasing the free space reduces the average total blocking probability while increasing the blocking probability of high rate users.

In prior work, contact welding phenomena were observed in automotive relays during break of motor inrush current. The switching performance of the type of relay investigated could be correlated with the parameters: over-travel, coil suppression, and the break current. In the present work the author further explores the impact of both the contact material (silver tin oxide versus fine grain silver) and the contact surface topography (brand new and pre-aged contacts). He further assesses the robustness of the system "relay" with those parameters using the Taguchi methods for robust design. Furthermore, the robustness of two alternative automotive relay types will be discussed.

Given a sparse linear system, A x = b, we can solve the equivalent system P A PT y = P b, x = PT y, where P is a permutation matrix. It has been known that, for example, when P is the RCMK (Reverse Cuthill-Mckee) ordering permutation, the convergence rate of the Krylov subspace method combined with the ILU-type preconditioner is often enhanced, especially if the matrix A is highly nonsymmetric. In this paper we offer a reordering heuristic for accelerating the solution of large sparse linear systems by the Krylov subspace methods with the ILUT preconditioner. It is the LRB (Line Red/Black) ordering based on the well-known 2-point Red-Black ordering. We show that for some model-like PDE (partial differential equation)s the LRB ordered FDM (Finite Difference Method)/FEM (Finite Element Method) discretization matrices require much less fill-ins in the ILUT factorizations than those of the Natural ordering and the RCMK ordering and hence, produces a more accurate preconditioner, if a high level of fill-in is used. It implies that the LRB ordering could outperform the other two orderings combined with the ILUT preconditioned Krylov subspace method if the level of fill-in is high enough. We compare the performance of our heuristic with that of the RCMK (Reverse Cuthill-McKee) ordering. Our test matrices are obtained from various standard discretizations of two-dimensional and three-dimensional model-like PDEs on structured grids by the FDM or the FEM. We claim that for the resulting matrices the performance of our reordering strategy for the Krylov subspace method combined with the ILUT preconditioner is superior to that of RCMK ordering, when the proper number of fill-in was used for the ILUT. Also, while the RCMK ordering is known to have little advantage over the Natural ordering in the case of symmetric matrices, the LRB ordering still can improve the convergence rate, even if the matrices are symmetric.

How to reduce noise with less speech distortion is a challenging issue for speech enhancement. We propose a novel approach for reducing noise with the cost of less speech distortion. A noise signal can generally be considered to consist of two components, a "white-like" component with a uniform energy distribution and a "color" component with a concentrated energy distribution in some frequency bands. An approach based on noise eigenspace projections is proposed to pack the color component into a subspace, named "noise subspace". This subspace is then removed from the eigenspace to reduce the color component. For the white-like component, a conventional enhancement algorithm is adopted as a complementary processor. We tested our algorithm on a speech enhancement task using speech data from the Texas Instruments and Massachusetts Institute of Technology (TIMIT) dataset and noise data from NOISEX-92. The experimental results show that the proposed algorithm efficiently reduces noise with little speech distortion. Objective and subjective evaluations confirmed that the proposed algorithm outperformed conventional enhancement algorithms.

Fair allocation of bandwidth and maximization of channel utilization are two important issues when designing a contention-based wireless medium access control (MAC) protocol. However, fulfilling both design goals at the same time is very difficult. Considering the problem in the IEEE 802.11 wireless local area networks (WLANs), in this work we propose a method using a p-persistent enhanced DCF, called P-IEEE 802.11 DCF, to achieve weighted fairness and efficient channel utilization among multiple priority classes in a WLAN. Its key idea is that when the back-off timer of a node reaches zero, the transmission probability is properly controlled to reflect the relative weights among data traffic flows so as to maximize the aggregate throughput and to minimize the frame delay at the same time. In particular, we obtain the optimal transmission probability based on a theoretical analysis, and also provide an approximation to this probability. The derived optimal and approximation are all evaluated numerically and simulated with different scenarios. The results show that the proposed method can fulfill our design goals under different numbers of priority classes and different numbers of nodes.

An interference cancellation (ICAN) scheme for mobile communication radio repeaters is presented. When a radio repeater has a gain that is larger than the isolation between its transmit and receive antennas, it oscillates due to feedback interference signals. To prevent feedback oscillation of a radio repeater, we first formulate a feedback oscillation model of the radio repeater and then derive an ICAN model from that model. From the derived ICAN model, we show that the stability and the signal quality of the repeater depend on the repeater's gain and delay, the propagation delay on feedback paths, feedback channel characteristics, and the capability of the feedback channel estimation algorithm. It is also shown that the stability condition of the repeater does not guarantee the quality of the repeater's output signal. To guarantee repeater's stability and signal quality, an ICAN scheme based on an iterative algorithm is subsequently proposed. The simulation results confirm the relationship between the stability and signal quality of the repeater and the impact of the aforementioned factors. Using the proposed ICAN scheme, a mean error vector magnitude (quality indicator) of about 6.3% for the repeater's output signal was achieved.

In this paper, we propose the novel Dynamic Feedback (DF-) MCML technique for high-speed and high-gain MCML type latch. The concept of the proposed DF-MCML technique is as follows; the output node signal is feedbacked to the input node in Sampling-Mode, and the output node is opened from the input node in Holding-Mode. It is shown by analytic theory that by this dynamic feedback sequence, both stability and sensibility of latch in Sampling-Mode is exponentially improved, and the gain of latch in Holding-Mode is drastically increased. Finally, we have numerically investigated the circuit performance of the novel DF-MCML type latch in comparison with the conventional MCML type latch by using P-Spice simulator. The maximum operation frequency of 180 nm DF-MCML type latch reaches over 20 GHz that is 2 times than the conventional MCML type latch. It is made clear that the proposed novel Dynamic Feedback MCML technique is suitable for over 10 GHz high-speed and high-gain Si ULSIs.

This paper introduces our proposed pre-FFT type MMSE-AAA for an OFDM packet transmission system to suppress sporadic interference. The AAA scheme controls an antenna weight to minimize the mean square error between its output signals of two periods with identical transmitted waveform and iterates the weight updating process in an OFDM symbol to rapidly converge the weight. The average PER performance of the proposed AAA with the presence of a sporadic inter-system/intra-system interference signal is evaluated through computer simulations that assume an exponentially decaying 12-path LOS fading channel and IEEE 802.11a data frame transmission. Simulation results show that the proposed AAA can effectively suppress sporadic inter-system interference that is irrelevant to its arrival timing. Sporadic intra-system interference can also be suppressed by the proposed AAA more efficiently than inter-system interference as long as the interference arrives between 13% and 90% of the OFDM symbol duration after the beginning of an OFDM symbol of the desired signal.

In this paper we describe a new framework of feature combination in the cepstral domain for multi-input robust speech recognition. The general framework of working in the cepstral domain has various advantages over working in the time or hypothesis domain. It is stable, easy to maintain, and less expensive because it does not require precise calibration. It is also easy to configure in a complex speech recognition system. However, it is not straightforward to improve the recognition performance by increasing the number of inputs, and we introduce the concept of variance re-scaling to compensate the negative effect of averaging several input features. Finally, we propose to take another advantage of working in the cepstral domain. The speech can be modeled using hidden Markov models, and the model can be used as prior knowledge. This approach is formulated as a new algorithm, referred to as Hypothesis-Based Feature Combination. The effectiveness of various algorithms are evaluated using two sets of speech databases. We also refer to automatic optimization of some parameters in the proposed algorithms.

The capacity of multiuser OFDM systems can be maximized by allocating resources (subcarrier and power) to the user with the highest instantaneous channel gain. This assumes complete channel state information (CSI) at the transmitter, which is achieved by every user reporting its CSI for all subcarriers to the transmitter via feedback channel. In practice, due to the limited capacity of the feedback channel, the completeness of CSI may be severely restricted especially with a large number of users transmitting a large amount of feedback information. In order to reduce the amount of feedback information while preserving the maximal capacity, quality based CSI feedback (QCF) is proposed in this letter. The system capacity is derived with QCF and compared with that of full CSI feedback. The results show that QCF successfully reduces the amount of feedback information with little capacity loss.

The ability of a modified bow-tie dipole antenna, which has an asymmetric-feed structure to operate at UHF-band (470-862 MHz) and dual ISM-band (2.4 GHz and 5.8 GHz) is demonstrated. Experimental results indicate that the VSWR 2:1 bandwidths achieved were 125.7%, 8.2% and 23.6% at 660 MHz, 2.45 GHz and 5.5 GHz. The proposed modified bow-tie dipole exhibits a nearly omni-directional radiation pattern with very easy to fabricate structure, and so is suitable for various commercial wideband applications.