This paper investigates the effect of crosstalk in multichannel coherent optical ASK systems. A closed-form signal-to-noise ratio (SNR) expression as a function of number of channels, channel separation, laser phase noise, intermediate frequency (IF) filter bandwidth expansion factor (α), system bit rate (Rb=1/T), and additive shot noise is presented. When the desired channel is between two channels in the electrical domain, the minimum permissible electrical domain channel spacing for a 1dB sensitivity penalty due to crosstalk is found to be 4.85Rb when α is optimum; and 8Rb when α=5 for νT=0.30 at BER=10-9. A fairly good agreement is found between the results of this work and those of a previous study.

We have proposed a connection-based optical wavelength division multiplexing network architecture. For the networks such as inter-office LANs, the guarantee of the bandwidths of connection-oriented calls is necessary. Notable features of the network are that multicast can be executed without copying the same data, and that time slots are rearrangeable to increase the throughput. The topology is passive star and a network controller (NWC) is connected to manage the time slot assignment. Each station's transmitting wavelength is fixed and is different from that of other stations. Each receiver changes the receiving wavelength slot by slot. Stations reserve time slots with permission of the NWC. Once a time slot is reserved the station can use the slot in every frame until the reservation is cancelled. This feature guarantees the bandwidths of connection-oriented calls. Upon receiving a time slot request, the NWC searches for a not-in-use slot common to the source station's transmitter (Tx) and the destination station's receiver (Rx). If there is no common empty slot and both the Tx and the Rx have empty slots, the NWC rearranges the already allocated time slots to create a new common empty slot. Simulations were performed to estimate the blocking rates for various cases of call bandwidth including multi-bitrate (the case in which various bandwidth calls are generated in a network) and multicast call, the calculation load of the NWC when it assigns a time slot including rearrangement, and the success rate of rearrangement. It was found that the blocking rate with the rearrangement is greatly reduced (1/10) compared with the case without rearrangement of the same throughput when the number of slots in a frame is more than 120, the number of stations in the network is 60 and the blocking rate without the rearrangement is less than 10-2. Over 100 Gbps throughput can be achieved when the number of slots in a frame is 120-240, the number of stations is 60, the bitrate of a transmitter is 2.5Gbps and the blocking rate is about 10-2. The rearrangement is especially effective in the case of multi-bitrate in which the blocking rate can be reduced to 1/100 that of the case without rearrangement at some point. It is also shown that a slot assignment including rearrangement can be executed sufficiently quickly (5s). These results indicate that practical realization of this access control architecture is possible.

The use of existing metallic local line facilities is being studied for providing "video on demand (VOD)" services to residential subscribers across asymmetric digital subscriber lines (ADSL). ADSL carries a high-rate channel in the downstream direction from a central office (CO) to the subscriber, and a low-rate channel in both directions on an existing 2-wire pair. Audio and video signals are compressed by the moving picture experts group's standardized algorithms (MPEG 1 and MPEG 2), and delivered to the subscriber in the high-rate channel. Control (demand and response) signals are transceived in the low-rate channel. This paper presents the line length coverage of ADSL systems given the environment of NTT's local networks. The bit rates in the downstream and upstream directions are assumed to be 1.6-9.2Mbit/s and 24kbit/s, respectively. Two types of ADSL systems are considered: transceiving ADSL signals using the plain old telephone service (POTS) line or the basic rate access (BRA; 320 kbaud ping-pong transmission system) line on the same 2-wire pair. 16-QAM, 32-QAM and 64-QAM are compared as transmission schemes. Intra-system crosstalk interference (interference between identical transmission systems) and inter-system crosstalk interference (interference between different transmission systems) with the existing digital subscriber lines (DSL) are estimated. It is shown that the inter-system crosstalk interference with BRA is most stringent, and ADSL with 16-QAM yields the best performance in NTT's local networks. This paper concludes that realizing ADSL with 16-QAM can achieve channel capacities of up to 9.2Mbit/s for fiber-in-the-feeder (FITF) access systems, but the possibility of applying ADSL to direct access systems is remote except for a restricted short haul use. Some comparisons regarding American local networks are also described.

This paper discusses the performance of non-coherent reception for M-ary spread-spectrum (M-ary/SS) signals in the presence of carrier frequency offset. In general, the M-ary/SS scheme is expected to be of higher spectral efficiency than the conventional DS/SS schemes, but its performance may be degraded by the carrier frequency offset. We, therefore, analyze the effect of carrier frequency offset on the performance of the non-coherent M-ary/SS system with orthogonal modulation using a set of sequences generated by the Hadamard matrix. As a result of the analysis, it has been found that the carrier frequency offset may cause a great deal of degradation in the performance, and that its effect has a distinctive property which is due to the characteristic of Hadamard matrix, at the same time. Making use of this property, we propose two schemes that can mitigate the effect of carrier frequency offset: one is based on choise of the code sequences, the other is on the error correcting code. The effectiveness of the schemes is evaluated in the terms of symbol-error-rates through analysis and computer simulation.

The periodic correlation properties of M sequences coded by channel codes are discussed. As for the channel codes, the Manchester code and the eight DC free codes in the FM family codes, which include the conventional FM code and the differential Manchester code, are adopted. The M sequences coded by the DC free codes in the FM family codes are referred to as FM coded M sequences. The periodic correlation properties of all combinations of the FM coded M sequences are checked, and the combinations which can provide almost the same or better properties as compared with those of the preferred pairs of M sequences are described. An example of code design using the FM coded M sequences for asynchronous direct sequence/spread spectrum multiple access systems is also discussed.

The throughput performance of the non-persistent carrier sense spread spectrum with overload detection (NP-CSSS/OD) protocol is analysed and compared with that of the conventional non-persistent and one-persistent carrier sense multiple access with collision detection (NP-CSMA/CD and 1P-CSMA/CD) and the one-persistent carrier sense spread spectrum with overload detection (1P-CSSS/OD) protocols. We also introduced utilization measurements and did some performance comparisons between these protocols. At high offered loads, the NP-CSSS/OD protocol is found to offer the best throughput and utilization performances amongst them.

Information systems to support cooperative work among people should be first designed to help humam communication. However, there are few systems based on the analysis of human communication. Standing on this situation, we propose a meeting support system for the participants' understandings by indicating the suitable information about the topic of the scene". Our system provides only useful information by monitoring each statement without complex methods. To show something useful multi-media information for members, we propose the following structure of the meeting on the basis of the analysis of communication. Each statement is classified into two levels, either; a statement about the progress" of the meeting (context-level utterances) or, a statement about objects" (content-level utterances). Further, content-level utterances are classified into two types, position utterances and argument utterances. Using this classification of statements, the proceeding of the meeting is represented as the tree model which is called a context-tree". If the structure of meetings is fixed, it is possible to select only useful information from all shared information for members by analyzing each content-level utterance. The system introduced in this paper shows appropriate multi-media information about the topic of the scene" by using the above model. We have implemented a prototype system based on the above ideas. Moreover, we have mode some experiments to show the effectiveness of this system. Those results show that our method is effective to improve the productivity" of meetings.

Device figure-of-merits for digital ICs are derived from analytical delay expressions for emitter-coupled logic and source-coupled FET logic inverters and are compared with the operating speeds of D-F/Fs reported in previous studies. We show that device figure-of-merits for baseband amplifiers are equivalent to those for digital ICs. The validity of device figure-of-merits are confirmed by measuring the bandwidth of the baseband amplifiers fabricated with AlGaAs/GaAs LBCTs.

This paper proposes a novel phase ambiguity resolver with combining a very low power Viterbi decoder employing a scarce state transition scheme to realize cost effective receivers for the PCM sound broadcasting satellite service. The theoretical analyses on phase decision performance show that the proposed resolver achieves the symbol-by-symbol phase detection and decides correctly phases of the demodulated data even if the bit error probability of 710-2. The resolver also reduces the phase decision time to below 1/1000 of that of the conventional resolver. Furthermore, experimental results of the power consumption estimate that the prototype Viterbi decoder consumes only 60mW at the data rate of 24.576Mbit/s.

This paper proposes a technique for estimating the harmonic frequencies based on instantaneous frequency (IF) of speech signals. The main problem is how to decompose the speech signal into the harmonic components. For this purpose, we use a set of bandpass-filters, each of whose center frequencies changes with time in order to track the instantaneous freuency of its output. As a result, the outputs of the band-pass filters become the harmonic components, and the instantaneous frequencies of the harmonics are accurately estimated. To evaluate the effectiveness of the approach, we apply it to pitch determination of speech. Pitch determination is simply accomplished by selecting the correct fundamental frequency out of the harmonic components. It is confirmed that the pitch extraction using the proposed pitch determination algorithm (PDA) is stable and accurate. The most significant feature of the PDA is that the extracted pitch contour is smooth and it requires no post-processing such as nonlinear filtering or any smoothing processes. Several examples are presented to demonstrate the capability of the harmonics estimation technique and the PDA.

With a view to applying to the active matrix displays, micromechanical electrostatic switches having Si-N both-ends-fixed beam of size 1.4 µm by 23 µm grown with LP-CVD on Si wafer were studied about its kinetic switching characteristics, especially its switching speed and hysteresis behavior. Electrostatic beam sticking problems were improved with the additional inverse polarity and short duration pulse following on the turn-on signal. The switching beam deflection of 0.16 µm with the switching time of less than 100 nsec. was measured by tightly focused laser interferometric method. Observed turn-on threshold voltages were more than 30 V, and the on/off hysteresis widths were from one third to two thirds of its threshold voltage. The memory function was experimented for the 2 msec. long holding period with the hold voltage of 25 V following on the writing pulse with the duration of 2 µsec. and the amplitude of 32 V. Now, planarization process has been considered to imtroduce the contact electrodes that were not built-in for these experiments. Although conductive actual switches were not tested, with the obtained results, it seems that the micromechanical electrostatic switch has the large potentials as an active matrix element in display panel especially in electro-luminescent devices or field-emission devices.

A photonic/video hybrid system for optical information processing by synthesis of the coherence function is proposed. Optical coherence function can be synthesized to have delta-function-like shape or notch shape by using direct frequency modulation of a laser diode with an appropriate waveform. Therefore, by choosing only the interference component in the interferometer, information processing functions can be obtained. The photonic/video hybrid system proposed provides a novel way to choose the interference component, which can improve the spatial resolution compared with our previous system with holographic technique. Selective extraction two-dimensional (2-D) information from a three-dimensional (3-D) object is successfully performed in basic experiments.

Mesa structures have been investigated to optimize a buried-heterostructure (BH) for a GaInAsP/InP surface-emitting (SE) laser regrown by metalorganic chemical vapor deposition (MOCVD), and it has been found that a square mesa top pattern of which the sides are at an angle of 45 to the 011 orientation is suitable. A 1.3-µm GaInAsP/InP square buried heterostructure (SBH) SE laser with this mesa structure has been demonstrated and low-threshold CW oscillation (threshold current Ith=0.45 mA) at 77 K and low-threshold room-temperature pulsed oscillation (Ith=12 mA) have been obtained.

In this paper we will propose a deterministic approach to model the radio propagation channels complex indoor environments. This technique applies the SBR method to find equivalent sources (images) in each launched ray tube, and sums the receiving amplitude contributed by all images coherently. We verify our SBR/image approach by comparing the numerical results in two canonical examples where closed-form solutions exist. The good agreement indicates that our method can provide a good approximation of high frequency radio propagation inside corridors where reflection is dominant. In the special case of a curved corridor, which can not be solved by analytic methods, we find a "focusing" effect that at some certain point the receiver will receive high power, even though it is out of sight. This SBR/image method can be enhanced by including the wall penetration and wedge diffraction effects, and even more complicated indoor environments will be tackles in the near future.

A subharmonic injection-locked oscillator (ILO) MMIC chain is proposed for the local oscillators and synthesizers used at millimeter-wave frequencies. A fabricated, primary 11-GHz-band injection-locked oscillator MMIC for the first stage ILO in the ILO-chain MMIC, achieves a wide subharmonic-injection-locking range at the subharmonic factors, 1/n (n=1, 2, 3, ), of 1/1, 1/2 and 1/3. The ILO MMIC abilities for synthesizer applications were confirmed with an injection-locking time of only 100-200 nsec, which is less than 1/100 that of PLL oscillators, and also with free-running oscillation performance and a wide injection locking range within a temperature range of -30 and 80.

This paper describes the multiple access performance of parallel combinatory spread spectrum (PC/SS) communication systems in nonfading and Rayleigh fading multipath channels. The PC/SS systems can provide the high-speed data transmission capability by transmitting multiple pseudo-noise sequences out of a pre-assigned sequence set. The performance is evaluated in terms of average bit error rate (BER) by numerical computation. In nonfading white gaussian channel, the PC/SS systems are superior to conventional direct sequence spread spectrum (DS/SS) systems under the identical spreading factor condition. In Rayleigh fading channel, the performance of the PC/SS system without diversity is poorer than that of the DS/SS system. By including the explicit and implicit diversity, the performance of the PC/SS system becomes better than that of conventional DS/SS systems. A longer spreading sequence is assignable to a PC/SS system having the spreading factor equal to that in the conventional DS/SS system. Hence, the error control coding is easily. It is found that the PC/SS systems including diversity and Reed-Solomon coding improves the multiple access performance.

This paper discusses advanced wireless communication technologies for achieving future high-speed mobile radios. Mainly, five technical fields are considered, that is, multi-level modulation for transmitting high-capacity information signal, advanced adaptive wireless system flexibly changing modulation level, symbol rate and traffic according to fading conditions, adaptive multicarrier system transmitting multimedia signals by changing the number of carrier according to the capacity of the signals, new CDMA techniques for mapping different bit rate services onto the same allocated bandwidth at the same time, and optical-linked microcellular communication system with millimeter wave air interface.

Radio disturbances of digital microwave links are likely to increase as man-made structures screen the radio propagation paths, and unwanted waves reflected or scattered by the structures interfere with radio signals. This paper describes a practical method for evaluating the influence of propagation impairments due to man-made structures on digital microwave links and provides some model calculations of those impairments. Since multilevel and quadrature modulation techniques are employed to achieve high spectral efficiency for recent digital transmissions, not only average level attenuation but also in-band distortion and intersymbol interference have to be taken into account. Propagation distortion, diffraction loss and cross-polar interference due to reflected and scattered waves from man-made structures such as buildings and conductor structures are evaluated.

The distributed measurement-based quasi-fixed frequency assignment (also known as quasi-static adaptive frequency assignment-QSAFA) methodology is a practical solution for frequency assignment in the emerging TDMA personal communications networks (PCN/PCS). Five different QSAFA algorithms are studied in this paper under different interference threshold settings. It is found that a simple aggressive algorithm without using a threshold (LIA-Least Interference Algorithm) performs the best under the conditions studied. The performance of this algorithm is also justified by the theoretical proof presented at the end of this paper.

The purpose of this research is to analyze production rules with coupling modes in active databases and to exploit an assistant system for rule programming. Each production rule is a specification including an event, a condition, and an action. The action is automatically executed whenever the event occurs and the condition is satisfied. Coupling modes are useful to control execution order of transactions. For example, a transaction for consistency check should be executed after transactions for update. An active database, which is a database with production rules, can spontaneously update database states and check their consistency. Production rules provide a powerful mechanism for knowledge-bases. However it is very difficult in general to predict how a set of production rules will behave because of cascading rule triggers, concurrency, and so on. We are attempting to adopt a process algebra as a basic tool to analyze production rules. In order to describe and analyze concurrent and communicating systems, process algebras such as CCS, CSP, ACP, and π-calculus, are well known. However there are some difficulties to apply existing process algebras to analysis of production rules in growing process trees by process creation. In this paper we propose a process algebra named CCSPR (a Calculus of Communicating Systems with Production Rules), Which is an extension of CCS. An advantage of CCSPR is to syntactically describe growing process trees. Therefore, production rules can be appropriately analyzed in CCSPR. After giving definitions and properties of CCSPR, we show an example of analysis of production rules in CCSPR.