This paper optimizes a hierarchical image transmission system based on the hierarchical modulation scheme in a band-limited Rayleigh fading channel. Authors analyze relations between hierarchical parameters and the image quality, and show that the existence of optimum hierarchical parameter that maximizes the received image quality.

A Time-Division Multiplexed (TDM) Hierarchical Switching System (HSS), proposed by Eng and Acampora [5], provides any size of bandwidth for a number of subscribers by allocating proper number of time-slots in a frame. In this paper, we present a binary time-slot assignment (TSA) algorithm by which a proper size of time-slots in the frame are allocated to each subscriber so as to meet its bandwidth requests. The time complexity of the proposed algorithm is O(NLlog2 L) in which N is the number of input/output links of the central switch and L is the number of time-slots allotted to each link in the frame. As the authors know, the most efficient algorithm proposed in the literature has time complexity of O(min(L, M2)min(N, M)M2), in which M is the number of subscribers that is larger than N in TDM/HSS system. To give a clear idea of relative efficiency between two algorithms, let us give a typical situation of M = L = O(N2). In this configuration our algorithm makes a significant improvement in time complexity by the order of O(M2/log2M).

This paper describes a new approach to the scheduling problem that assigns tasks of a parallel program described as a task graph onto parallel machines. The approach handles interprocessor communication and heterogeneity, based on using both the theoretical results developed so far and a lookahead scheduling strategy. The experimental results on randomly generated task graphs demonstrate the effectiveness of this scheduling heuristic.

RF integration, until recently the integration of active devices in conventional architectures suitable for discrete-component circuits, is now turning into full-integration based on new architectures developed specifically for an LSI technology. This paper reviews some of the key existing and emerging circuit techniques and discusses the serious problem of crosstalk. In order to develop miniature and low power RF transceivers, direct-conversion and monolithic VCO's will be further studied. Silicon bipolar technology will still be playing major role beyond the year 2,000, and CMOS will also be used in certain applications.

Recently, various systems based on agent model architecture have been developed. In these systems, 'agents' with their own goals and functions are embedded, and perform their own tasks through collaboration among them by communication to achieve a goal as the system requires. Using this agent model for the construction of educational systems, adaptive configuration of the system is achieved. The purpose of this study is to propose a methodology for the design of an educational system based on agent model architecture. This paper describes the configuration of the agent model and the communication language and protocol used to represent collaboration among the agents necessary for performing a cooperative task. Moreover, we explain how to organize these agents as an educational system. As a case to show the organization of agents, we discuss the configuration of an intelligent learning environment to support C shell programming in UNIX and explain the collaborative behavior of embedded agents.

Significant traffic variations occur in telecommunication networks. This paper focuses on hour-to-hour traffic variations during 24 hours and investigates the possibility of using idle periods effectively by introducing non-realtime service at a discount rate. In order to provide non-realtime service, memory is placed at each telecom center. When immediate service is not available, messages of non-realtime calls are stored in the memory and served later when network resources are available. Realtime calls are served with preference. A basic model and a method of dimensioning the memory capacity are presented. The basic model is extended to the network model, and methods of designing a minimum cost network and pricing and profit issues are presented. The results for a basic model are verified by traffic simulation. Numerical examples are given to show the effectiveness of non-realtime service.

A low power dual modulus prescaler for frequency synthesizers has been designed in a standard 1.2 µm digital CMOS process using enhancement source coupled logic (ESCL). Being a differential low amplitude current mode logic, ESCL has two interesting characteristics for this design besides low power consumption: the low noise performance, that allows this circuit to be on the same chip with sensitive analog circuitry, and the ability to run with a 200 mV sinusoidal signal as generated from an LC oscillator without the need of a clock amplifier. At 195 MHz and 3 V supply, the current consumption of the prescaler is as low as 289 µA, while maximum operating frequencies of 910 MHz at 5 V and 650 MHz at 3 V are achieved.

A novel adder-free architecture for realizing a small-size π/4-shift QPSK signal generator IC is presented. In order to realize an adder function, analog current-mode addition is utilized instead of digital adders. Impulse responses of a roll-off filter are stored in a ROM as a Δ-Σ modulated one-bit data stream. This can greatly reduce the die size to 0.8mm 0.8mm while maintaining high modulation accuracy. The test chip was fabricated by using the standard 0.8µm CMOS technology, and the chip achieved 1.8% vector modulation error with a 2.7V power supply.

A 2.7-V Si-bipolar quadrature modulator with a 90 phase shifter consisting of a frequency doubler and a master-slave flip-flop is described. The modulator operates over a wide bandwidth (0.95 to 1.88 GHz) without any tuning or adjustments. It is implemented using 20-GHz Si-bipolar technology and dissipates 97 mW at 2.7 V. An image ratio of less than -40 dBc is obtained between 1.1 and 1.8 GHz. Moreover, third-order harmonic products are less than -40 dBc and carrier leakage is less than -30 dBc.

The use of existing metallic local line facilities is being studied for the provision of high-speed digital transmission services. Local line characteristics have to be modeled in the form of the objective requirements that should be met by DSL for estimating the feasibility of the service provision in the actual network. This paper presents the results of a study that models the metallic media characteristics of NTT's local network. First, the line lenghts determined by the existing local line deployment rule and the cable types used in the networks are introduced. Second, the values of crosstalk characteristics, the most significant factors in limiting DSL range, are given by classifying essential line conditioning states of each cable. The values of crosstalk characteristics are newly computed by taking into account detailed cable pair-binding (cabling) structures, and the worst case values among all possible combinations of multiple inter-pair interfering-interfered relationships within a cable are given though a previous study approximated cable pair-binding structures. The crosstalk characteristics of NTT's and American local networks are also compared. A modified approximate equation of line propagation characteristics is also proposed for representative local lines, and its precision is verified by comparing simulation results to actual measurements in both frequency and time domains.

We propose a new network architecture nemed Holonic Network for personalized multimedia communications, which is characterized by distributed cooperative networking based on autonomous management and all-optical transport networks. We than propose autonomous routing method. Moreover, an information searching method and a route generation method with network maps, which are essential for this network, are proposed. Lastly, we evaluate the proposed network performance by theoretical analysis and system emulation.

For designing the underwater transmission system using directly projected audible sound by underwater loudspeaker to prevent a diving accident and/or to give a working instrucion, it is important to estimate the transmission loss for a wall not onl for pure tones but also for wideband signal such as voice and noise. In this paper, two practical methods of evaluating the underwater insulation effect for a single wall are discussed. One is a reconfirmation that the mass law which is frequently used in air still explains the transmission loss in water. Because parameters such as surface density and sound velocity in the mass law are widely changeable depending on the depth in water, much complexity is involved in preparing a theoretical curve for every parameter. So to avoid such complexity, a unified parameter Φ(=ωm cos θ/2ρc) is introduced to describe the mass law. This newly presented curve as a function of Φ is in good agreement with all rearranged experimental data for every kind of plates. The other is a proposition of new evaluating method of insulation effect of a wall for a wideband signal, using an idea of (100-α) percentage point of the noise level probability destribution, Lα. Firstly proposed method is confirmed experimentally and secondly proposed method is confirmed by a simulation experiment.

This paper proposes a new approach for distributing millimeter wave signals from a central location to micro-base-stations using optical fiber links. The links utilize two Mach-Zehnder external optical modulators (EOMs) to perform all optical down-conversion, eliminating the need for a local oscillator or laser diode in the micro-base-station. A simple model of the EOMs is developed to illustrate the principle of dual-EOM mixing. The characteristics of conversion loss and intermodulation are examined for two cases: where the EOMs are operated in the linear mode and where the local oscillator's EOM is biased as a frequency doubling modulator. Additionally, we examined the use of an optical amplifier to reduce conversion loss for these two cases. The measured conversion loss of the link was 82 dB, and we estimated this could be reduced to about 48 dB by employing an optical amplifier and a more efficient EOM for RF reception.

This paper proposes a new AFC (automatic frequency control) circuit employing a double-product type frequency discriminator to enable fast acquisition in very-low CNR (carrier to noise power ratio) environments. The frequency step responses of the proposed AFC circuit are theoretically analyzed. In addition this paper evaluates the performance of the proposed AFC circuit by computer simulation in very-low CNR environments. The simulation results confirm that click noise at the frequency discriminator causes large frequency tracking error and that this error can be improved by increasing the delay time of the double-product type frequency discriminator. The frequency error can be also reduced by introducing the proposed frequency discriminator to modify the frequency error detection performance. The acquisition time of the proposed AFC circuit can be reduced by about 100 symbols compared to the conventional cross-product type AFC circuit.

This paper describes the design, characteristics, and applications of newly developed latching-type 1 2 and 1 8 single-mode fiber switches. These switches have been successfully fabricated using micromachine technology. To reduce insertion loss and light reflection, an index-matching oil is injected into the switches. The fabricated 1 2 switches exhibit a low insertion loss of 0.31 dB, high return loss of 51 dB, relatively fast switching speed of 2 ms, and low driving power of 9 mw. Switching operation is stable over 108 switching times. A practical 1 8 single-mode fiber switch was also constructed using seven 1 2 switches cascaded in three stages. The fabricated 1 2 and 1 8 switches have been applied to an NTT multichannel video distribution FTTH system to enhance system reliability.

As the demand for communications via satellite is rapidly increasing, techniques that produce large traffic capacity are becoming more and more appreciated. We present a class of block coded modulation (BCM) and multiple block coded modulation (MBCM) schemes in this paper. While the BCM scheme is directly derived from our previous work, the MBCM schemes are newly developed using a technique of multiple symbol transmission via a single trellis branch. This class of BCM and MBCM schemes is both power and bandwidth efficient. They also have an advantage in holding both a trellis and a block structure. Code structures, decoding trellises and the corresponding branch variables of these BCM and MBCM schemes are all derived. Their applications to satellite communications are discussed. Computer simulations are performed to verify coding gain performance.

Optical access networks will be key infrastructures to realize the multimedia society in the near future. Usually, in the case of trunk line, optical cables are installed under the ground. But optical fiber cables approach to offices and homes for optical access networks, the cables often take forms of aerial cables. Some issues must be considered in the optical cable splicing of aerial routes. This paper discusses some subjects; for example, a spare length of the fiber in a cable closure should be short and the splicer should be light weight and compact size to ensure easy operation in the aerial site. This paper also proposes two types of fusion splicers and a useful operation table for aerial optical cable splicing.

This paper presents fully digital high speed (17.6Mb/s) burst modem for Offset Quadrature Phase Shift Keying (OQPSK), which employs novel digital modem VLSICs. The modulator VLSIC directly generates modulated intermediate frequency (IF) signals in a fully digitalized manner. A newly proposed digital reverse-modulation and pre-filtered carrier filter-limiter scheme realizes low power consumption and stable operation in a low Eb/No condition. The demodulator VLSIC also achieves fast bit-timing acquisition in burst mode. Moreover, it supports stable initial burst acquisition by a novel automatic frequency control (AFC) acquisition detector and a digital burst detector. A digital burst automatic gain control (AGC) compensates burst-to-burst level differences without analog circutits. Performance evaluation results show that the new modem achieves satisfactory bit-error-rate performance in severe environments. The developed modem has been employed in a commercial portable earth station for ISDN services and reduces the hardware size to one third that of the conventional one.

As a low-cost optical transceiver for access network systems, we propose a new monolithic transceiver photonic integrated circuit (PIC) fabricated by bandgap energy controlled selective metalorganic vapor phase epitaxy (MOVPE). In the PIC, all optical components are monolithically integrated. Thus, the number of optical alignment points is significantly reduced and the assembly costs of the module is decreased compared to those of hybrid modules, that use silica waveguides. Moreover, by using selective MOVPE, extremely low-loss buried heterostructure waveguides can be fabricated without any etching. In-plane bandgap energy control is also possible, allowing the formation of active and passive core layers simultaneously without complicated fabrication. The transceiver PIC showed fiber-coupled output power of more than 1 mW and receiver bandwidth of 7 GHz. Modulation and detection operations at 500 Mb/s were also demonstrated. As a cost effective fabrication technique for monolithic PICs, bandgap energy controlled selective MOVPE is a promising candidate.

Recently, computer communications, especially Internet services, have become popular and as a result, high-speed network access circuits are now desired. NTT has developed an economical and high-speed multimedia computer network, combining satellite and terrestrial circuits. The satellite circuit transmission rate is approximately 30-Mbit/s. To select IP packets from such high-speed satellite circuits, this system employs the asynchronous transfer mode (ATM) in the satellite section and we have developed a new economical satellite circuit receive adapter (SRA) for the satellite section. This paper describes the system configurations and the key network control technologies for multi-link routing, high speed processing and broadcasting.