Experimental results on the superconducting three-terminal devices Using Bi-system High-Tc Superconductors were reported. The VCJJ (Variabel critical-current-type Josephson junction devices) using the thermal effect (VCJJ) and a dual gate Josephson device of a new current-injection type are described. The basic technology and problems for high-Tc three-terminal devices are briefly discussed.

A novel coupling configuration consisting of a tapered slab waveguide with a wedge-shaped nonlinear cladding is proposed. Coupling characteristics for TE waves are analyzed by means of the beam propagation method. The proposed configuration is less sensitive to the offset between coupled waveguides than is the configuration with a homogeneous non-linear cladding.

In general, a two-dimensional display is defined by two orthogonal unit vectors. In developing the display, discriminant analysis has a shortcoming that the extracted axes are not orthogonal in general. First, in order to overcome the shortcoming, we propose discriminant analysis which provides an orthonormal system in the transformed space. The transformation preserves the discriminatory ability in terms of the Fisher criterion. Second, we present a necessary and sufficient condition that discriminant analysis in the original space provides an orthonormal system. Finally, we investigate the relationship between orthogonal discriminant analysis and the Karhunen-Loeve expansion in the original space.

This paper proposes design schemes which obtain an efficient spare-channel assignment against single and double link failures for a self-healing network. Spare-channel design problems can be formulated as a linear-programming (LP) problem when variables are assumed to be continuous. For the problem, the proposed algorithm effectively solves a sub-set of whole constraints by making use of a maximum-flow algorithm in an iterative manner. It is shown that the maximum number of iteration times is limited by the number of links in the network. Moreover, the relation between the design function and the self-healing function is discussed. It is also shown that the cooperation of the two functions can realize more effective control in large scale networks.

This paper proposes an efficient design method of three-dimensional (3-D) recursive digital filters for video signal processing via decomposition of magnitude specifications. A given magnitude specification of a 3-D digital filter is decomposed into specifications of 1-D digital filters with three different (horizontal, vertical, and temporal) directions. This decomposition can reduce design problems of 3-D digital filters to design problems of 1-D digital filters, which can be designed with ease by conventional methods. Consequently, design of 3-D digital filters can be efficiently performed without complicated tests for stability and large amount of computations. In order to process video signal in real time, the 1-D digital filters with temporal direction must be causal, which is not the case in horizontal and vertical directions. Since the proposed method can approximate negative magnitude specifications obtained by the decomposition with causal 1-D R filters, the 1-D digital filters with temporal direction can be causal. Therefore the 3-D digital filters designed by the proposed method is suitable for real time video signal processing. The designed 3-D digital filters have a parallel separable structure having high parallelism, regularity and modularity, and thus is suitable for high-speed VLSI implementation.

This paper treats the problem of realizing high speed 2-D denominator separable digital filters. Partitioning a 2-D data plane into square blocks, filtering proceeds block by block sequentially. A fast intra-block parallel processing method was developed using block state space realization, which allows simultaneous computation of all the next block states and the outputs of one block. As the block state matrix of the filter has high sparsity, the rows and columns are interchanged respectively to reduce the matrix size. The filter is implemented by a multiprocessor system, where for each matrix's row one processor is assigned to perform the row-column vector multiplication. All processors wirk in synchronized fashion. Number of processors of this implementation are equal to the number of rows of the reduced state matrix and throughput is raised with block lengths.

We present a successful method for designing 2-D circularly symmetric R lowpass filters with constant group delay. The procedure is based on a transformation of a 1-D prototype R filter with constant group delay, whose magnitude response is the 2-D cross-sectional response. The 2-D filter transfer function has a separable denominator and a numerator which is obtained from the prototype numerator by means of a series of McClellan transformations whose free parameters can be optimized by successive procedure. The method is illustrated by an example.

The two most important parameters in reactive ion etching process, ion bombardment energy and flux, were extracted through a simple RF waveform measurement at the excitation electrode in a conventional cathode-coupled plasma RIE system. By using the extracted plasma parameters, damage and contamination in Si substrates induced by reactive ion etching in a SiCl4 plasma were investigated. A very convenient map representation of ion energy and ion flux was introduced in understanding the etching process occurring in the RIE system.

Parallel multiple context-free grammars (pmcfg's) and multiple context-free grammars (mcfg's) were introduced as extensions of context-free grammars to describe the syntax of natural languages. Pmcfg's and mcfg's deal with tuples of strings, and it has been shown that the universal recognition problem for mcfg's is EXP-POLY time-complete where the universal recognition problem is the problem to decide whether G generates w for a given grammar G and string w. In this paper, the universal recognition problems for the class of pmcfg's and for the subclass of pmcfg's with the information-lossless condition are shown to be EXP-POLY time-complete and PSPACE-complete, respectively. It is also shown that the problems for pmcfg's and for mcfg's with a bounded dimension are both -complete and those for pmcfg's and for mcfg's with a bounded degree are both -complete. As a corollary, the problem for modified head grammars introduced by Vijay-Shanker, et al. to define the syntax of natural languages is shown to be in deterministic polynomial time.

For the development of a practical device simulation, it is necessary to solve the large sparse linear equations with a high speed computation of direct solution method. The use of parallel computation methods to solve the linear equations can reduce the CPU time greatly. The Multi Step Diakoptics (MSD) algorithm, is proposed as one of these parallel computation methods with direct solution, which is based on Diakoptics, that is, a tearing-based parallel computation method for sparse linear equations. We have applied the MSD algorithm to device simulation. This letter describes the partition and connection schedules in the MSD algorithm. The evaluation of this algorithm is done using a massively parallel computer with distributed memory (AP1000).

The Asynchronous Transfer Mode (ATM) is expected to be the basic transmission technology for B-ISDN. Before this happens, however, it will be necessary to predict the impact of fully-deployed ATM-based networks quantitatively. This paper compares the cost-efficiency of an ATM-based network with that of an STM-based network and clarifies the applicable areas of ATM network configurations, in terms of required facilities and considering the effect of statistical multiplexing. It shows cost-effective network configurations based on different service classes and a network configuration suited to ATM. It also discusses the effect of a Synchronous Digital Hierarchy architecture for Virtual Path dimensioning.

Lexical-Functional Grammars (LFG's) were introduced to define the syntax of natural languages. In LFG's, each node of a derivation tree has some attributes. An LFG G consists of a context-free grammar (cfg) G0 called the underlying cfg of G and a description Pfs of constraints between the values of the attributes. Pfs can specify (1) constraints between the value of an attribute of a node and those of its children, and (2) constraints between the value of an attribute of a node called a controller and that of a node called its controllee. RLFG's were introduced as a subclass of LFG's. In RLFG's, only constraints between the value of an attribute of a node and those of its children can be specified. It is shown in this paper that the class of languages generated by RLFG's is equal to the class of recursively enumerable languages. Some restrictions on LFG's were proposed for the purpose of efficient parsing. Among them are (1) the condition called a valid derivation, and (2) the condition that the underlying cfg is cycle-free. For an RLFG G, if the production rules of the underlying cfg of G are of the form AaB or Aa for nonterminal symbols A, B and a terminal symbol a, then G is called an R-RLFG. Every R-RLFG satisfies the above restriction (1) and (2). It is also shown in this paper that the class of languages generated by R-RLFG's contains an NP-hard language, which means that parsing in deterministic polynomial time of LFG's is impossible in general (unless PNP) even if the above restrictions (1) and (2) are satisfied.

The motion of particles in low-pressure chemical vapor deposition (LPCVD) (0.4 Torr) equipment has been investigated by a numerical simulation. The effects of wafer orientation, electrostatic forces, and thermophoresis were evaluated. Horizontal surface-down processing and vertical processing can reduce particulate contamination remarkably compared with horizontal surface-up processing. Static electricity control is essential. Weakly charged wafers (several V to several 10 V) can significantly increase submicron particle deposition. In the absence of electrical forces, thermophoresis prevents deposition of particles in the size range 0.03 µmDp0.6 µm, when the temperature difference between the wafer surface and the gas inlet temperature exceeds 100. Deposition of particles smaller than 0.03 µm still occurs by diffusion.

This paper designs and evaluates highly parallel VLSI processors for real time 2-D state-space digital filters using hierarchical behavioral description language and synthesizer. The architecture of the 2-D state-space digital filtering system is a linear systolic array of homogeneous VLSI processors, each of which consists of eight processing elements (PEs) executing 1-D state-space digital filtering with multi-input and multi-output. Hierarchical behavioral description language and synthesizer are adopted to design and evaluate PE's and the VLSI processors. One 16 bit fixed-point PE executing a (4, 4)-th order 2-D state-space digital filtering is described on the basis of distributed arithmetic in about 1,200 steps by the description language and is composed of 15 K gates in terms of 2 input NAND gate. One VLSI processor which is a cascade connection of eight PEs is composed of 129 K gates and can be integrated into one 1515 [mm2] VLSI chip using 1 µm CMOS standard cell. The 2-D state-space digital filtering system composed of 128 VLSI processors at 25 MHz clock can execute a 1,0241,024 image in 1.47 [msec] and thus can be applied to real-time conventional video signal processing.

Voyager Neptune radio science data were collected using three antennas on Earth on August 25, 1989. A parabolic antenna at Canberra, Australia, of 70 meter diameter received 2.3GHz and 8.4GHz carriers. The 64 meter parabolic antennas at Parkes. Australia and Usuda, Japan, received only the 8.4GHz and only the 2.3GHz carriers, respectively. It is necessary to reduce the frequency variation in the received signal carrier to extract accurate information on physically interesting objects such as Neptune's atmosphere, ionosphere, or the rings. After the frequency stabilization process, the frequency drift was reduced from 180Hz down to a maximum of 5Hz, making it possible to reduce the data bandwidth and, consequently, the data volume, by a factor of 30. The uncertainty of the signal frequency estimates were also reduced from 5 down to 510-3Hz/sec above the atmosphere, from 5 down to 0.5Hz/sec in the atmosphere, and from 50 down to 3Hz/sec at the beginning and the end of the atmospheric occultation. Much of the remaining uncertainty is due to scintillations in Neptune's atmosphere and cannot be reduced further. The estimates are thus meaningfully accurate and suitable for scientific analysis and coherent arraying of data from different antennas. Two results based on these estimates are shown: a preliminary temperature-pressure (T-p) profile of Neptune's atmosphere down to a pressure level of 2 bar computed using the Usuda 2.3GHz data, and a multipath phenomenon in the atmosphere seen in Canberra 8.4GHz data. Our T-p profile shows good agreement with the results presented by Lindal et al. within 1K below 100mbar pressure level, even though our result is based on an independent data set and processing. A comparison of the multipath phenomena at Neptune with that at Uranus implies that it was created by a cloud layer with a smaller scale height than the atmosphere above and below it. The processing methods described were developed in part with the interest to coherently array Canberra, Parkes and Usuda data. In this sense, while this paper does not extend any science results, the observations and results are derived independently from other published results, and in the case of Usuda, are completely new.

The effects of changing system parameters on job scheduling policies are studied for load balancing of multi-class jobs in a distributed computer system that consists of heterogeneous host computers connected by a single-channel communications network. A job scheduling policy decides which host should process the arriving jobs. We consider two job scheduling policies. The one is the overall optimal policy whereby jobs are scheduled so as to minimize the overall mean job response time. Tantawi and Towsley obtained the algorithm that gives the solution of the policy in the single class job environment and Kim and Kameda extended it to the multiple job class environment. The other is the individually optimal policy whereby jobs are scheduled so that every job may feel that its own expected response time is minimized. We can consider three important system parameters in a distributed computer system: the communication time of the network, the processing capacity of each node, and the job arrival rate of each node. We examine the effects of these three parameters on the two load balancing policies by numerical experiment.

We investigate the relationship between two different notions of reducibility among prediction (learning) problems within the distribution-free learning model of Valiant (PAC learning model). The notions of reducibility we consider are the analogues for prediction problems of the many-one reducibility and of the Turing reducibility. The former is the notion of prediction preserving reducibility developed by Pitt and Warmuth, and its generalization. Concerning these two notions of reducibility, we show that there exist a pair of prediction problems A and B, whose membership problems are polynomial time solvable, such that A is reducible to B with respect to the Turing reducibility, but not with respect to the prediction preserving reducibility. We show this result by making use of the notion of a class of polynomially sparse variants of a concept representation class. We first show that any class A of polynomially sparse variants of another class B is reducible to B with respect to the Turing reducibility'. We then prove the existence of a prediction problem R and a class R of polynomially sparse variants of R, such that R does not reduce to R with respect to the prediction preserving reducibility.

Extended form of interpolatory approximation is presented for tne n-dimensional (n-D) signals whose generalized spectrums have weighted norms smaller than a given positive number. The presented approximation has the minimum measure of approximation error among all the linear and the nonlinear approximations using the same generalized sample values.

Spoken language systems such as speech-to-speech dialog translation systems have been gaining more attention in recent years. These systems require full integration of speech recognition and natural language understanding. This paper presents an efficient parsing algorithm that integrates the search problems of speech processing and language processing. The parsing algorithm we propose here is regarded as an extension of the finite-state-network directed, one-pass search algorithm to one directed by a context-free grammar with retention of the time-synchronous procedure. The extended search algorithm is used to find approximately globally optimal sentence hypotheses; it does not have overhead which exists in, for example, hierarchical systems based on the lattice parsing approach. The computational complexity of this search algorithm is proportional to the length of the input speech. As the search process in the speech recognition can directly take account of the predictive information in the sentence parsing, this framework can be extended to sopken language systems which deal with dynamically varying constraints in dialogue situations.

This study proposes a new training method for hidden Markov model with separate vector quantization (SVQ-HMM) in speech recognition. The proposed method uses the correlation of two different kinds of features: cepstrum and delta-cepstrum. The correlation is used to decrease the number of reestimation for two features thus the total computation time for training models decreases. The proposed method is applied to Japanese language isolated dgit recognition.