This paper presents the design of a capacitive coupler for underwater wireless power transfer focused on the landing direction of a drone. The main design feature is the relative position of power feeding/receiving points on the coupler electrodes, which depends on the landing direction of the drone. First, the maximum power transfer efficiencies of coupled lines with different feeding positions are derived in a uniform dielectric environment, such as that realized underwater. As a result, these are formulated by the coupling coefficient of the capacitive coupler, the unloaded qualify factor of dielectrics, and hyperbolic functions with complex propagation constants. The hyperbolic functions vary depending on the relative positions and whether these are identical or opposite couplers, and the efficiencies of each coupler depend on the type of water, such as seawater and tap water. The design method was demonstrated and achieved the highest efficiencies of 95.2%, 91.5%, and 85.3% in tap water at transfer distances of 20, 50, and 100 mm, respectively.

This paper proposes a non-linear overloaded MIMO detector that outperforms the conventional soft-input maximum likelihood detector (MLD) with less computational complexity. We propose iterative log-likelihood ratio (LLR) estimation and multi stage LLR estimation for the proposed detector to achieve such superior performance. While the iterative LLR estimation achieves better BER performance, the multi stage LLR estimation makes the detector less complex than the conventional soft-input maximum likelihood detector (MLD). The computer simulation reveals that the proposed detector achieves about 0.6dB better BER performance than the soft-input MLD with about half of the soft-input MLD's complexity in a 6×3 overloaded MIMO OFDM system.

In this paper, we consider precoder design for wireless data aggregation in sensor networks. The precoder optimization problem can be formulated as minimization of mean squared error under transmit power and block diagonal constraints. We include statistical correlation of data into the optimization problem, which is appeared in typical applications but is ignored in conventional designing methods. We propose precoder optimization algorithms based on projected gradient descent with projection onto the constraint sets. The proposed method can achieve better performance than the conventional methods that do not incorporate data correlation, especially when data are highly correlated. We also extend the proposed approach to the context of over-the-air computation.

This paper proposes a network design model, considering data consistency for a delay-sensitive distributed processing system. The data consistency is determined by collating the own state and the states of slave servers. If the state is mismatched with other servers, the rollback process is initiated to modify the state to guarantee data consistency. In the proposed model, the selected servers and the master-slave server pairs are determined to minimize the end-to-end delay and the delay for data consistency. We formulate the proposed model as an integer linear programming problem. We evaluate the delay performance and computation time. We evaluate the proposed model in two network models with two, three, and four slave servers. The proposed model reduces the delay for data consistency by up to 31 percent compared to that of a typical model that collates the status of all servers at one master server. The computation time is a few seconds, which is an acceptable time for network design before service launch. These results indicate that the proposed model is effective for delay-sensitive applications.

A circular string formed by connecting the first and the last symbols of a string is one of the simplest sequence forms, and it has been used for many applications such as data compression and fragment assembly problem. A sufficient condition on the lengths of substrings with frequencies for reconstruction of an input circular binary string is shown. However, there are no detailed descriptions on the proof of the sufficient condition and reconstruction algorithm. In this paper, we prove a necessary and sufficient condition on the lengths of substrings with frequencies for reconstruction of the circular string. We show the length is shorter than that of previous study for some circular strings. For improving the length, we use minimal absent words (MAWs) for given substrings of length k, and we propose a new construction algorithm of MAWs of length h(>k) while a conventional construction algorithm of MAWs can construct MAWs of length l(≤k). Moreover, we propose reconstruction algorithm of an input circular string for given substrings satisfying the new condition.

Facial Beauty Prediction (FBP) is a significant pattern recognition task that aims to achieve consistent facial attractiveness assessment with human perception. Currently, Convolutional Neural Networks (CNNs) have become the mainstream method for FBP. The training objective of most conventional CNNs is usually to learn static convolution kernels, which, however, makes the network quite difficult to capture global attentive information, and thus usually ignores the key facial regions, e.g., eyes, and nose. To tackle this problem, we devise a new convolution manner, Dynamic Attentive Convolution (DyAttenConv), which integrates the dynamic and attention mechanism into convolution in kernel-level, with the aim of enforcing the convolution kernels adapted to each face dynamically. DyAttenConv is a plug-and-play module that can be flexibly combined with existing CNN architectures, making the acquisition of the beauty-related features more globally and attentively. Extensive ablation studies show that our method is superior to other fusion and attention mechanisms, and the comparison with other state-of-the-arts also demonstrates the effectiveness of DyAttenConv on facial beauty prediction task.

This letter presents a technique that observes system call mapping behavior of the proxy kernel layer of secure container runtimes. We applied it to file system operations of a secure container runtime, gVisor. We found that gVisor's operations can become more expensive than the native by 48× more syscalls for open, and 6× for read and write.

Text classification is a fundamental task in natural language processing, which finds extensive applications in various domains, such as spam detection and sentiment analysis. Syntactic information can be effectively utilized to improve the performance of neural network models in understanding the semantics of text. The Chinese text exhibits a high degree of syntactic complexity, with individual words often possessing multiple parts of speech. In this paper, we propose BRsyn-caps, a capsule network-based Chinese text classification model that leverages both Bert and dependency syntax. Our proposed approach integrates semantic information through Bert pre-training model for obtaining word representations, extracts contextual information through Long Short-term memory neural network (LSTM), encodes syntactic dependency trees through graph attention neural network, and utilizes capsule network to effectively integrate features for text classification. Additionally, we propose a character-level syntactic dependency tree adjacency matrix construction algorithm, which can introduce syntactic information into character-level representation. Experiments on five datasets demonstrate that BRsyn-caps can effectively integrate semantic, sequential, and syntactic information in text, proving the effectiveness of our proposed method for Chinese text classification.

Representation learning is a crucial and complex task for multivariate time series data analysis, with a wide range of applications including trend analysis, time series data search, and forecasting. In practice, unsupervised learning is strongly preferred owing to sparse labeling. However, most existing studies focus on the representation of individual subseries without considering relationships between different subseries. In certain scenarios, this may lead to downstream task failures. Here, an unsupervised representation learning model is proposed for multivariate time series that considers the semantic relationship among subseries of time series. Specifically, the covariance calculated by the Gaussian process (GP) is introduced to the self-attention mechanism, capturing relationship features of the subseries. Additionally, a novel unsupervised method is designed to learn the representation of multivariate time series. To address the challenges of variable lengths of input subseries, a temporal pyramid pooling (TPP) method is applied to construct input vectors with equal length. The experimental results show that our model has substantial advantages compared with other representation learning models. We conducted experiments on the proposed algorithm and baseline algorithms in two downstream tasks: classification and retrieval. In classification task, the proposed model demonstrated the best performance on seven of ten datasets, achieving an average accuracy of 76%. In retrieval task, the proposed algorithm achieved the best performance under different datasets and hidden sizes. The result of ablation study also demonstrates significance of semantic relationship in multivariate time series representation learning.

In this study, a Coanda-drone with length, width, and height of 121.6, 121.6, and 191[mm] was designed, and its total mass was 1166.7[g]. Using four propulsion devices, it could produce a maximum of 5428[g] thrust. Its structure is very different from conventional drones because in this study it combines the design of the jet engine of a jet fixed-wing drone with the fuselage structure layout of a rotary-wing drone. The advantage of jet drone's high propulsion is kept so that it can output greater thrust under the same variation of PWM waveform output. In this study, the propulsion device performs high-speed jetting, and the airflow around the propulsion device will also be jetted downward along the direction of the airflow.

Record/replay is one essential tool in clouds to provide many capabilities such as fault tolerance, software debugging, and security analysis by recording the execution into a log and replaying it deterministically later on. However, in virtualized environments, the log file increases heavily due to saving a considerable amount of I/O data, finally introducing significant storage costs. To mitigate this problem, this paper proposes RR-Row, a redirect-on-write based virtual machine disk for record/replay scenarios. RR-Row appends the written data into new blocks rather than overwrites the original blocks during normal execution so that all written data are reserved in the disk. In this way, the record system only saves the block id instead of the full content, and the replay system can directly fetch the data from the disk rather than the log, thereby reducing the log size a lot. In addition, we propose several optimizations for improving I/O performance so that it is also suitable for normal execution. We implement RR-Row for QEMU and conduct a set of experiments. The results show that RR-Row reduces the log size by 68% compared to the currently used Raw/QCow2 disk without compromising I/O performance.

The misalignment of a coupler is a significant issue for capacitive wireless power transfer (WPT). This paper presents a capacitive WPT system specifically designed for underwater drones operating in flowing freshwater environments. The primary design features include a capacitive coupler with an opposite relative position between feeding and receiving points on the coupler electrode, two phase compensation circuits, and a load-independent inverter. A stable and energy-efficient power transmission is achieved by maintaining a 90° phase difference on the coupler electrode in dielectrics with a large unloaded quality factor (Q factor), such as in freshwater. Although a 622-mm coupler electrode is required at 13.56MHz, the phase compensation circuits can reduce to 250mm as one example, which is mountable to small underwater drones. Furthermore, the electricity waste is automatically reduced using the constant-current (CC) output inverter in the event of misalignment where efficiency drops occur. Finally, their functions are simulated and demonstrated at various receiver positions and transfer distances in tap water.

There are several benefits of the information that is invisible to the human eye. “Invisible” here means that it can be visualized or quantified when using instruments. For example, it can improve security without compromising product design. We have succeeded in making an invisible digital image on a metal substrate using periodic repeatability by thin-film interference of niobium oxides. Although this digital information is invisible in the visible light wavelength range of 400-800nm, but detectable in the infrared light that of 800-1150nm. This technology has a potential to be applied to anti-counterfeiting and traceability.

The novel patch element shapes with the interdigital and multi-via structures for mushroom-type metasurface reflectors are proposed for controlling the reflection phases. The interdigital structure provides a wide reflection phase range by changing the depth of the interdigital fingers. In addition, the multi-via structure provides the higher positive reflection phases such as near +180°. The sufficient reflection phase range of 360° and the low polarization dependent properties could be confirmed by the electromagnetic field simulation. The metasurface reflector for the normal incident plane wave was designed. The desired reflection angles and sharp far field patterns of the reflected beams could be confirmed in the simulation results. The prototype reflectors for the experiments should be designed in the same way as the primary reflector design of the reflector antenna. Specifically, the reflector design method based on the ray tracing method using the incident wave phase was proposed for the prototype. The experimental radiation pattern for the reflector antenna composed of the transmitting antenna (TX) and the prototype metasurface reflector was similar to the simulated radiation pattern. The effectiveness of the proposed structures and their design methods could be confirmed by these simulation and experiment results.

Aiming at the problem of “energy hole” caused by random distribution of nodes in large-scale wireless sensor networks (WSNs), this paper proposes an adaptive energy-efficient balanced uneven clustering routing protocol (AEBUC) for WSNs. The competition radius is adaptively adjusted based on the node density and the distance from candidate cluster head (CH) to base station (BS) to achieve scale-controlled adaptive optimal clustering; in candidate CHs, the energy relative density and candidate CH relative density are comprehensively considered to achieve dynamic CH selection. In the inter-cluster communication, based on the principle of energy balance, the relay communication cost function is established and combined with the minimum spanning tree method to realize the optimized inter-cluster multi-hop routing, forming an efficient communication routing tree. The experimental results show that the protocol effectively saves network energy, significantly extends network lifetime, and better solves the “energy hole” problem.

Due to the increase in the volume of data and intensified concurrent requests, distributed caching is commonly used to manage high-concurrency requests and alleviate pressure on databases. However, there is limited research on distributed record mapping caching, and traditional caching algorithms have suboptimal resolution performance for mapping records that typically follow a long-tail distribution. To address the aforementioned issue, in this paper, we propose a recommendation-based adaptive auxiliary caching method, AC-REC, which delivers the primary cache record along with a list of additional cache records. The method uses request correlations as a basis for recommendations, customizes the number of additional cache entries provided, and dynamically adjusts the time-to-live. We conducted evaluations to compare the performance of our method against various benchmark strategies. The results show that our proposed method, as compared to the conventional LCE method, increased the cache hit ratio by an average of 20%, Moreover, this improvement is achieved while effectively utilizing the cache space. We believe that our strategy will contribute an effective solution to the related studies in both traditional network architecture and caching in paradigms like ICN.

In the field of micro-LED displays consisting of UV or Blue-LED arrays and phosphors, where the chips used are very small, particle size of phosphors must be small to suppress variation in hue for each pixel. Especially, there is a strong demand for a red phosphor with small particle sizes. However, quantum yields of inorganic phosphors decrease as particles size of phosphors get smaller. On the other hand, in the case of organic phosphors and complexes, quantum yields don't decrease when particle size gets smaller because each molecule has a function of absorbing and emitting light. We focus on Eu(III) complexes as candidates of red phosphors for micro-LED displays because their color purities of photoluminescence spectra are high, and have been tried to enhance photoluminescence intensity by coordinating non-ionic ligand, specifically, newly designed phosphine oxide ligands. Non-ionic ligands have generally less influential on properties of complexes compared with ionic ligands, but have a high degree of flexibility in molecular design. We found novel molecular design concept of phosphine oxide ligands to enhance photoluminescence properties of Eu(III) complexes. This time, novel dinuclear Eu(III)-β-diketonates with a branched tetraphosphine tetraoxide ligand, TDPBPO and TDPPPO, were developed. They are designed to have two different phosphine oxide portions; one has aromatic substituents and the other has no aromatic substituent. TDPBPO and TDPPPO ligands have functions of increasing absolute quantum yields of Eu(III)-β-diketonates. Eu(III)-β-diketonates with branched tetraphosphine tetraoxide ligands have sharp red emissions and excellent quantum yields, and are promising candidates for micro LED displays, security media, and sensing for their pure and strong photoluminescence intensity.

Negation scope resolution is the process of detecting the negated part of a sentence. Unlike the syntax-based approach employed in previous researches, state-of-the-art methods performed better without the explicit use of syntactic structure. This work revisits the syntax-based approach and re-evaluates the effectiveness of syntactic structure in negation scope resolution. We replace the parser utilized in the prior works with state-of-the-art parsers and modify the syntax-based heuristic rules. The experimental results demonstrate that the simple modifications enhance the performance of the prior syntax-based method to the same level as state-of-the-art end-to-end neural-based methods.

Despite Siamese trackers attracting much attention due to their scalability and efficiency in recent years, researchers have ignored the background appearance, which leads to their inapplicability in recognizing arbitrary target objects with various variations, especially in complex scenarios with background clutter and distractors. In this paper, we present a simple yet effective Siamese tracker, where the shifted windows multi-head self-attention is produced to learn the characteristics of a specific given target object for visual tracking. To validate the effectiveness of our proposed tracker, we use the Swin Transformer as the backbone network and introduced an auxiliary feature enhancement network. Extensive experimental results on two evaluation datasets demonstrate that the proposed tracker outperforms other baselines.

Images captured in low-light environments have low visibility and high noise, which will seriously affect subsequent visual tasks such as target detection and face recognition. Therefore, low-light image enhancement is of great significance in obtaining high-quality images and is a challenging problem in computer vision tasks. A low-light enhancement model, LLFormer, based on the Vision Transformer, uses axis-based multi-head self-attention and a cross-layer attention fusion mechanism to reduce the complexity and achieve feature extraction. This algorithm can enhance images well. However, the calculation of the attention mechanism is complex and the number of parameters is large, which limits the application of the model in practice. In response to this problem, a lightweight module, PoolFormer, is used to replace the attention module with spatial pooling, which can increase the parallelism of the network and greatly reduce the number of model parameters. To suppress image noise and improve visual effects, a new loss function is constructed for model optimization. The experiment results show that the proposed method not only reduces the number of parameters by 49%, but also performs better in terms of image detail restoration and noise suppression compared with the baseline model. On the LOL dataset, the PSNR and SSIM were 24.098dB and 0.8575 respectively. On the MIT-Adobe FiveK dataset, the PSNR and SSIM were 27.060dB and 0.9490. The evaluation results on the two datasets are better than the current mainstream low-light enhancement algorithms.