Many previous studies on image quality assessment of 3D still images or video clips have been conducted. In particular, it is important to know the region in which assessors are interested or on which they focus in images or video clips, as represented by the ROI (Region of Interest). For multi-view 3D images, it is obvious that there are a number of viewpoints; however, it is not clear whether assessors focus on objects or background regions. It is also not clear on what assessors focus depending on whether the background region is colored or gray scale. Furthermore, while case studies on coded degradation in 2D or binocular stereoscopic videos have been conducted, no such case studies on multi-view 3D videos exist, and therefore, no results are available for coded degradation according to the object or background region in multi-view 3D images. In addition, in the case where the background region is gray scale or not, it was not revealed that there were affection for gaze point environment of assessors and subjective image quality. In this study, we conducted experiments on the subjective evaluation of the assessor in the case of coded degradation by JPEG coding of the background or object or both in 3D CG images using an eight viewpoint parallax barrier method. Then, we analyzed the results statistically and classified the evaluation scores using an SVM.

This paper presents a cell-based all-digital phase-locked loop (ADPLL) with hierarchical gated digitally controlled oscillator (G-DCO) for low voltage operation, wide frequency range as well as low-power consumption. In addition, a new time-domain hierarchical frequency estimation algorithm (HFEA) for frequency acquisition is proposed to estimate the output frequency in 1.5MF (MF = 3 in this paper) cycles and this fast lock-in time is suitable to the dynamic voltage frequency scaling (DVFS) systems. A hierarchical G-DCO is proposed to work at low supply voltage to reduce the power consumption and at the same time to achieve wide frequency range and precise frequency resolution. The core area of the proposed ADPLL is 0.02635 mm2. In near-threshold region (VDD = 0.36 V), the proposed ADPLL only dissipates 68.2 µW and has a rms period jitter of 1.25% UI at 60 MHz output clock frequency. Under 0.5 V VDD operation, the proposed ADPLL dissipates 404.2 µW at 400 MHz. The fast lock-in time of 4.489 µs and the low jitter performance below 0.5% UI at 400 MHz output clock frequency in the proposed ADPLL are suitable in event-driven or DVFS applications.

Directional communications have been considered as a feasible alternative to improve spatial division and throughput in mobile communication environments. In general, directional MAC protocols proposed in the literature rely on channel reservation based on control frames, such as RTS/CTS. Notwithstanding, channel reservation based on control frames increases latency and has an impact on the network throughput. The main contribution of this paper is to propose a channel reservation technique based on pulse/tone signals. The proposed scheme, termed directional pulse/tone channel reservation (DPTCR), allows for efficient channel reservation without resorting to control frames such as RTS and CTS. Theoretical and empirical results show that the proposed scheme has a low probability of failure while providing significant throughput gains. The results show that DPTCR is able to provide throughput improvement up to 158% higher as compared to traditional channel reservation employing RTS/CTS frames.

In this letter, a simple dispersion matrix design method for generalized space-time shift keying is presented, in which the dispersion matrices are systematically constructed with cyclic identity matrix, without the need of computer search. The proposed scheme is suitable for any number of transmit antennas greater than two, and can achieve the transmit diversity order of two except two special cases. Simulation results are presented to verify our theoretical analysis and the performance of the proposed scheme.

Track mis-registration (TMR) is one of the major problems in high-density magnetic recording systems such as bit-patterned media recording (BPMR). In general, TMR results from the misalignment between the center of the read head and that of the main track, which can deteriorate the system performance. Although TMR can be handled by a servo system, this paper proposes a novel method to alleviate the TMR effect, based on the readback signal. Specifically, the readback signal is directly used to estimate a TMR level and is then further processed by the suitable target and equalizer designed for such a TMR level. Simulation results indicate that the proposed method can sufficiently estimate the TMR level and then helps improve the system performance if compared to the conventional receiver that does not employ a TMR mitigation method, especially when an areal density is high and/or a TMR level is large.

In this paper, a specified hardware architecture of the Fast Mode Decision (FMD) algorithms presented by our previous work is proposed. This architecture is designed as an embedded mode dispatch module. On the basis of this module, some unnecessary modes can be skipped or the mode decision process can be terminated in advanced. In order to maintain a higher compatibility, the FMD algorithms are unitedly designed as an unique module that can be easily embedded into a common video codec for H.265/HEVC. The input and output interfaces between the proposed module and other parts of the codec are designed based on simple but effective protocol. Hardware synthesis results on FPGA demonstrate that the proposed architecture achieves a maximum frequency of about 193 MHz with less than 1% of the total resources consumed. Moreover, the proposed module can improve the overall throughput.

In these days, recognizing a user personality is an important issue in order to support various personalized services. Besides the conventional phone usage such as call logs, SMS logs and application usages, smart phones can gather the behavior of users by polling various embedded sensors such as GPS sensors. In this paper, we focus on how to predict user attitude based on GPS log data by applying location clustering techniques and extracting features from the location clusters. Through the evaluation with one month-long GPS log data, it is observed that the location-based features, such as number of clusters and coverage of clusters, are correlated with user attitude to some extent. Especially, when SVM is used as a classifier for predicting the dichotomy of user attitudes of MBTI, over 90% F-measure is achieved.

High dynamic range (HDR) images that include large differences in brightness levels are studied to address the lack of knowledge on the quality estimation method for real HDR images. For this, we earlier proposed a new metric, the independent signal-to-noise ratio (ISNR), using the independent pixel value as the signal instead of the peak value (PSNR). Next, we proposed the local peak signal-to-noise ratio (LPSNR), using the maximum value of neighboring pixels, as an improved version. However, these methods did not sufficiently consider human perception. To address this issue, here we proposed an objective estimation method that considers spatial frequency characteristics based on the actual brightness. In this method, the approximated function for human characteristics is calculated and used as a 2D filter on an FFT for spatial frequency weighting. In order to confirm the usefulness of this objective estimation method, we compared the results of the objective estimation with a subjective assessment. We used the organic EL display which has a perfect contrast ratio for the subjective assessment. The results of experiments showed that perceptual weighting improves the correlation between the SNR and MOS of the subjective assessment. It is recognized that the weighted LPSNR gives the best correlation.

Aperture synthesis technology represents an effective approach to millimeter-wave radiometers for high-resolution observations. However, the application of synthetic aperture imaging radiometer (SAIR) is limited by its large number of antennas, receivers and correlators, which may increase noise and cause the image distortion. To solve those problems, this letter proposes a compressive regularization imaging algorithm, called CRIA, to reconstruct images accurately via combining the sparsity and the energy functional of target space. With randomly selected visibility samples, CRIA employs l1 norm to reconstruct the target brightness temperature and l2 norm to estimate the energy functional of it simultaneously. Comparisons with other algorithms show that CRIA provides higher quality target brightness temperature images at a lower data level.

This letter presents performance analysis in the high signal-to-noise ratio (SNR) region for matched filter (MF) precoding in single cell Massive MIMO systems. The outage probability function is derived in closed form, and the data rate of each user is also given. We have also presented asymptotic analysis in terms of data rate for MF when the number of users and the number of antennas grow without bounds. The expressions of these analytical results are rather simple and are thus convenient for overall performance evaluation. The simulation results show that the analysis are very accurate.

A regional protection system based on a wireless Ad-Hoc network has been in operation since 2008 in Shiojiri City, Japan. Wireless terminals transmit data packets to a server via transponders situated around the city. In this paper, a new routing algorithm that takes into account the level of congestion of the transponders is proposed. Using computer simulations, the proposed algorithm is shown to reduce the packet loss rate compared to the previous algorithm which is based on minimization of the number of hops to the server. Also, the proposed algorithm is shown be have almost the same packet loss rate as the best routing decisions obtained by an exhaustive search. Furthermore, the simulations used recreate the actual movement of terminals, so the results show what will happen in a realistic environment.

Perceptually optimized missing texture reconstruction via neighboring embedding (NE) is presented in this paper. The proposed method adopts the structural similarity (SSIM) index as a measure for representing texture reconstruction performance of missing areas. This provides a solution to the problem of previously reported methods not being able to perform perceptually optimized reconstruction. Furthermore, in the proposed method, a new scheme for selection of the known nearest neighbor patches for reconstruction of target patches including missing areas is introduced. Specifically, by monitoring the SSIM index observed by the proposed NE-based reconstruction algorithm, selection of known patches optimal for the reconstruction becomes feasible even if target patches include missing pixels. The above novel approaches enable successful reconstruction of missing areas. Experimental results show improvement of the proposed method over previously reported methods.

We demonstrated generation of arbitrarily patterned optical pulse trains and frequency tunable terahertz (THz) pulses by spectral synthesis of optical combs generated by a Mach-Zehnder-modulator-based flat comb generator (MZ-FCG). In our approach, THz pulses were generated by photomixing of a multi-tone signal, which is elongated pulse train, and a single-tone signal. Both signals were extracted from a comb signal by using optical tunable bandpass filters. In the case of optical pulse train generation, the MZ-FCG generated comb signals with 10 GHz-spacing and 330 GHz-width, which was converted to a 2.85 ps-width pulse train by chirp compensation using a single-mode fiber. By combining the MZ-FCG with a pulse picker composed of a 40 Gbps intensity modulator, divided pulse trains and arbitrarily bit sequences were successfully generated. The single-mode light was extracted by an optical bandpass filter and the band-controlled pulse train was extracted by an optical bandpass filter. By photomixing them, a THz pulse was successfully generated. In the case of THz pulse generation, by photomixing a single-tone and a multi-tone signals extracted by tunable bandpass filters, THz pulses with a center frequency of 300 GHz was successfully generated. Furthermore, frequency tunability of the center frequency was also demonstrated.

The Satellite/Terrestrial Integrated mobile Communication System (STICS), which allows terrestrial mobile phones to communicate directly through a satellite, has been studied [1]. Satellites are unaffected by the seismic activity that causes terrestrial damage, and therefore, the STICS can be expected to be a measure that ensures emergency call connection. This paper first describes the basic characteristics of call blocking rates of terrestrial mobile phone systems in areas where non-functional base stations are geographically clustered, as investigated through computer simulations that showed an increased call blocking rate as the number of non-functional base stations increased. Further simulations showed that restricting the use of the satellite system for emergency calls only ensures the STICS's capacity to transmit emergency communications; however, these simulations also revealed a weakness in the low channel utilization rate of the satellite system [2]. Therefore, in this paper, we propose increasing the channel utilization rate with a priority channel framework that divides the satellite channels between priority channels for emergency calls and non-priority channels that can be available for emergency or general use. Simulations of this priority channel framework showed that it increased the satellite system's channel utilization rate, while continuing to ensure emergency call connection [3]. These simulations showed that the STICS with a priority channel framework can provide efficient channel utilization and still be expected to provide a valuable secondary measure to ensure emergency communications in areas with clustered non-functional base stations during large-scale disasters.

Considering worse-case channel uncertainties, we investigate the robust energy efficient (EE) beamforming design problem in a K-user multiple-input-single-output (MISO) interference channel. Our objective is to maximize the worse-case sum EE under individual transmit power constraints. In general, this fractional programming problem is NP-hard for the optimal solution. To obtain an insight into the problem, we first transform the original problem into its lower bound problem with max-min and fractional form by exploiting the relationship between the user rate and the minimum mean square error (MMSE) and using the min-max inequality. To make it tractable, we transform the problem of fractional form into a subtractive form by using the Dinkelbach transformation, and then propose an iterative algorithm using Lagrangian duality, which leads to the locally optimal solution. Simulation results demonstrate that our proposed robust EE beamforming scheme outperforms the conventional algorithm.

This paper proposes the concept of adaptive multi-rate (AMR), which jointly employs switching between two links and adaptive rate on each link, for hybrid free-space optical/radio-frequency (FSO/RF) systems. Moreover, we present the cross-layer design of AMR switching, which is based on both the physical and link layers with an automatic-repeat request (ARQ) scheme. We develop an analytical framework based on a Markov chain model for system performance analysis. System performance metrics, including frame-error rate, goodput and link switching probability, are analytically studied over fading channels. Numerical results quantitatively show how the proposal significantly outperforms conventional ones with physical layer-based design and/or fixed-rate switching operation.

Selective visual attention is an integral mechanism of the human visual system that is often neglected when designing perceptually relevant image and video quality metrics. Disregarding attention mechanisms assumes that all distortions in the visual content impact equally on the overall quality perception, which is typically not the case. Over the past years we have performed several experiments to study the effect of visual attention on quality perception. In addition to gaining a deeper scientific understanding of this matter, we were also able to use this knowledge to further improve various quality prediction models. In this article, I review our work with the aim to increase awareness on the importance of visual attention mechanisms for the effective design of quality prediction models.

This paper investigates an interference mitigation technique for dynamic time division duplex (TDD) based frequency-separated small cell networks in future long term evolution advanced (LTE-A) based wireless access systems. In dynamic TDD, cross-link interference, i.e. evolved node B (eNB)-eNB interference and user equipment (UE)-UE interference, also occur, and eNB-eNB interference in particular significantly degrades the uplink (UL) transmission performance. In order to alleviate the impacts of eNB-eNB interference and to obtain high traffic adaptation gain, we investigate a transmit power control (TPC) based interference mitigation (IM) scheme. In TPC-IM, time-domain subframes are divided into two subframe sets according to whether the cross-link interference can occur or not, and different TPC parameters are applied depending on the type of subframe. To improve of UL signal to interference plus noise power ratio (SINR) in the subframe set with the potential to occur eNB-eNB interference, there are two approaches of UL power boosting and downlink (DL) power reduction. We investigate the adequate combination of these two approaches to avoid an impact of DL performance degradation and increase of UE power consumption. Moreover, we further investigate a combined scheme of the TPC-IM and a cell clustering interference mitigation (CCIM) to avoid the significantly strong cross-link interference from the neighbouring cells. Computer simulation confirms that the proposed TPC-IM scheme can achieve 4.4% and 26.2% gain in the average DL and UL throughputs, respectively, compared to the case without any IM schemes on dynamic TDD. Moreover, when the CCIM is applied to the TPC-IM scheme, 11.6% and 40.3% gain can be achieved in the average DL and UL throughputs, respectively.

This paper summarizes recent progress on modified uni-traveling carrier photodiodes that have achieved RF output power levels of 1.8 Watt and 4.4 Watt in continuous wave and pulsed operation, respectively. Flip-chip bonded discrete photodiodes, narrowband photodiodes, and photodiodes integrated with antennas are described.

In this letter, a new analysis technique for finding the convexity of iterative maximum likelihood (IML) methods for direction-of-arrival (DOA) estimation is presented. The proposed technique can pave the way in avoiding the local solution when the IML methods are utilized to estimate DOA, especially for the scenarios of array with large antennas. From the derivation, we can see that as long as the initial DOA belongs to the approximate convex range estimated by our proposed technique, the IML methods can estimate the DOA very well without entering into local minima, which is particularly true for the large arrays. Furthermore, numerical experiments show us the results tallied well with our theoretical derivations.