This paper proposes an asymmetric traffic accommodation scheme using a multihop transmission technique for CDMA/FDD cellular communication systems. The proposed scheme exploits the multihop transmission to downlink packet transmissions, which require the large transmission power at their single-hop transmissions, in order to increase the downlink capacity. In these multihop transmissions, vacant uplink band is used for the transmissions from relay stations to destination mobile stations, and this leads more capacity enhancement in the downlink communications. The relay route selection method and power control method for the multihop transmissions are also investigated in the proposed scheme. The proposed scheme is evaluated by computer simulation and the results show that the proposed scheme can achieve better system performance.

High-efficiency pure-white organic light-emitting diodes (OLEDs) were fabricated using small polysilicic acid nanodot embedded polymeric hole-transporting layer. By incorporating the nanodot, the efficiency of a solution-processed phosphorescent white OLED was increased from 6.8 to 23.7 lm/W, an improvement of 250%. 17.1 lm/W was obtained while the same concept was applied on a mixed-host composed fluorescent white OLED.

In a real-time system, when the execution of a task is preempted by another task, the interrupted task falls into a blocked state. Since its re-execution begins from the interrupted point generally, the task's timer containing the remaining time until its completion should be maintained in the blocked state. This is the reason for introducing the notion of memorable events in this paper. We present a new timed discrete event model (TDEM) that adds the memorable events to the TDEM framework of Brandin and Wonham (1994). Using supervisory control theory upon the proposed TDEM, we analyze the schedulability of preemptable periodic and sporadic tasks executing on a uniprocessor.

We propose to integrate a single lens on top of multiple OLEDs. Angular distribution of the light emitted from the lens surface is altered by turning on the OLEDs selectively. We can use such a light source as a backlight for a liquid crystal display to switch its viewing angle range and/or to display multiple images in different directions. Pixel-level integration would allow one to construct an OLED display with a similar emission angle control.

This paper presents the analysis of a new multi-oscillated current resonant type DC-DC converter. Current resonant converters have several remarkable features such as high efficiency, small size, low cost and low noise, and are frequently employed in many portable electronic systems such as personal computers, cellular phones and flat panel displays. The current resonant type converter generally employs pulse frequency modulation for constant voltage control in the output. For this reason, the magnetizing current through the converter not only causes a power loss under a light load, but also a loss during stand-by. Therefore, this type of converter has a problem in that the required smaller size cannot be achieved, because an auxiliary source is necessary for stand-by. In order to solve these problems, a new current resonant type power supply is proposed in which two driving methods are employed. In these driving methods, one MOSFET as a main switch is driven by an auxiliary winding of the transformer and another MOSFET as a main switch is driven by the driving IC with a low withstand voltage. Good agreement of the observed and simulated waveforms was confirmed. In addition, eight distinct states and four distinct operating modes, which compose of the sequence of states, were clarified by experimental and simulated analysis.

The development of network technology reveals the clear trend that mobile devices will soon be equipped with more and more network-based functions and services. This increase also results in more intrusions and attacks on mobile devices; therefore, mobile security mechanisms are becoming indispensable. In this paper, we propose a novel signature matching scheme for mobile security. This scheme not only emphasizes a small resource requirement and an optimal scan speed, which are both important for resource-limited mobile devices, but also focuses on practical features such as stable performance, fast signature set updates and hardware implementation. This scheme is based on the finite state machine (FSM) approach widely used for string matching. An SRAM-based two-level finite state machine (TFSM) solution is introduced to utilize the unbalanced transition distribution in the original FSM to decrease the memory requirement, and to shorten the critical path of the single-FSM solution. By adjusting the boundary of the two FSMs, optimum memory usage and throughput are obtainable. The hardware circuit of our scheme is designed and evaluated by both FPGA and ASIC technology. The result of FPGA evaluation shows that 2,168 unique patterns with a total of 32,776 characters are stored in 177.75 KB SelectRAM blocks of Xilinx XC4VLX40 FPGA and a 3.0 Gbps throughput is achieved. The result of ASIC evaluation with 180 nm-CMOS library shows a throughput of over 4.5 Gbps with 132 KB of SRAM. Because of the small amount of memory and logic cell requirements, as well as the scalability of our scheme, higher performance is achieved by instantiating several signature matching engines when more resources are provided.

Rapid advances in semiconductor manufacturing technology have led to higher chip power densities, which places greater emphasis on packaging and temperature control during testing. For system-on-chips, peak power-based scheduling algorithms have been used to optimize tests under specified power constraints. However, imposing power constraints does not always solve the problem of overheating due to the non-uniform distribution of power across the chip. This paper presents a TAM/Wrapper co-design methodology for system-on-chips that ensures thermal safety while still optimizing the test schedule. The method combines a simplified thermal-cost model with a traditional bin-packing algorithm to minimize test time while satisfying temperature constraints. Furthermore, for temperature checking, thermal simulation is done using cycle-accurate power profiles for more realistic results. Experiments show that even a minimal sacrifice in test time can yield a considerable decrease in test temperature as well as the possibility of further lowering temperatures beyond those achieved using traditional power-based test scheduling.

In this paper, a new formulation of equal-length three-section open stubs having two zeros located on the unit circle and one zero at z=-1 (θ=π) in the Z-plane is presented. In particular, new filter configurations consisting of equal-length two-section open stubs, cascade lines, open stubs, and three-section open stubs are employed to emulate the discrete-time filters. To examine the validity of our formulation, we realized two discrete-time Chebyshev type II low-pass filters in the form of microstrip lines. The frequency responses of these two filters are measured to validate this new formulation.

Tin-doped indium oxide (ITO) thin films were prepared on a polyethylene terephthalate (PET) foil by bias sputtering. In the absence of a substrate bias, films having a high resistivity of 210-2 Ωcm were formed. On the other hand, by the application of an rf substrate bias, films having a low resistivity of 2.610-4 Ωcm were formed. The energy of ions that bombarded the substrate during bias sputtering was estimated by a simulation of the ion acceleration. The optimum ion-energy required for the reduction of resistivity was found to be approximately 50 eV.

Recently, multimedia services are increasing with the widespread use of various wireless applications such as web browsers, real-time video, and interactive games, which results in traffic asymmetry between the uplink and downlink. Hence, time division duplex (TDD) systems which provide advantages in efficient bandwidth utilization under asymmetric traffic environments have become one of the most important issues in future mobile cellular systems. It is known that two types of intercell interference, referred to as crossed-slot interference, additionally arise in TDD systems; the performances of the uplink and downlink transmissions are degraded by BS-to-BS crossed-slot interference and MS-to-MS crossed-slot interference, respectively. The resulting performance unbalance between the uplink and downlink makes network deployment severely inefficient. Previous works have proposed intelligent time slot allocation algorithms to mitigate the crossed-slot interference problem. However, they require centralized control, which causes large signaling overhead in the network. In this paper, we propose to change the shape of the cellular structure itself. The conventional cellular structure is easily transformed into the proposed cellular structure with distributed receive antennas (DRAs). We set up statistical Markov chain traffic model and analyze the bit error performances of the conventional cellular structure and proposed cellular structure under asymmetric traffic environments. Numerical results show that the uplink and downlink performances of the proposed cellular structure become balanced with the proper number of DRAs and thus the proposed cellular structure is notably cost-effective in network deployment compared to the conventional cellular structure. As a result, extending the conventional cellular structure into the proposed cellular structure with DRAs is a remarkably cost-effective solution to support asymmetric traffic environments in future mobile cellular systems.

A total-field/scattered-field (TF/SF) boundary which is commonly used in the finite-difference time-domain (FDTD) method to illuminate scatterers by plane waves, is developed for use in the constrained interpolation profile (CIP) method. By taking the numerical dispersion into account, the nearly perfect TF/SF boundary can be achieved, which allows us to calculate incident fields containing high frequency components without fictitious scattered fields. First of all, we formulate the TF/SF boundary in the CIP scheme. The numerical dispersion relation is then reviewed. Finally the numerical dispersion is implemented in the TF/SF boundary to estimate deformed incident fields. The performance of the nearly perfect TF/SF boundary is examined by measuring leaked fields in the SF region, and the proposed method drastically diminish the leakage compared with the simple TF/SF boundary.

Multipath energy capture and inter-symbol interference (ISI) are two intractable problems in high-data-rate Ultra-wideband (UWB) systems. To tackle the problems and simplify the receiver, we propose an adaptive interference avoidance scheme based on Pre-RAKE combining technique. The symbol repetition period (SRP) is regarded a changeable parameter in an ordered set to avoid severe interference paths and guarantee high data-rate. The set is known to both the transmitter and receiver. The index of the selected SRP is then sent to the receiver to coordinate the transmitter and receiver. The SRP can be updated adaptively according to the variations of the channels. Both theoretical analysis and simulations show that the ISI is mitigated and the transmission rate is improved simultaneously compared to the constant SRP transmission scheme.

This paper evaluates three inter-domain redundancy path computation methods based on PCE (Path Computation Element). Some inter-domain paths carry traffic that must be assured of high quality and high reliability transfer such as telephony over IP and premium virtual private networks (VPNs). It is, therefore, important to set inter-domain redundancy paths, i.e. primary and secondary paths. The first scheme utilizes an existing protocol and the basic PCE implementation. It does not need any extension or modification. In the second scheme, PCEs make a virtual shortest path tree (VSPT) considering the candidates of primary paths that have corresponding secondary paths. The goal is to reduce blocking probability; corresponding secondary paths may be found more often after a primary path is decided; no protocol extension is necessary. In the third scheme, PCEs make a VSPT considering all candidates of primary and secondary paths. Blocking probability is further decreased since all possible candidates are located, and the sum of primary and secondary path cost is reduced by choosing the pair with minimum cost among all path pairs. Numerical evaluations show that the second and third schemes offer only a few percent reduction in blocking probability and path pair total cost, while the overheads imposed by protocol revision and increase of the amount of calculation and information to be exchanged are large. This suggests that the first scheme, the most basic and simple one, is the best choice.

In 2006, Miranda et al. proposed an anonymity scheme to achieve peers' anonymity in Peer-to-Peer (P2P) reputation systems. In this paper, we show that this scheme can not achieve peers' anonymity in two cases. We also propose an improvement which solves the problem and improves the degree of anonymity.

In order to evaluate the effect of Nakagami-Rice fading on Orthogonal Frequency Division Multiplex (OFDM) signal transmission when the delay profile exceeds the guard interval, a simple prediction model is developed by extending the Equivalent Transmission-Path (ETP) model for Rayleigh fading. The validity of the model is demonstrated by comparing the calculated values of BER to those obtained by computer simulation. Using the newly developed ETP-OFDM model, digital transmission characteristics of the OFDM signal in a multipath environment when the delay profile exceeds the guard interval are shown as a function of K factor, delay spread, guard interval and OFDM symbol period.

We study the performances of a synchronous chip-interleaved, block spread (CIBS) code division multiple access (CDMA) with space-time block-coding (STBC) in the presence of frequency-selective fading. For providing the space diversity gain due to STBC, we introduce the optimum precoding for the STBC. Zero-forcing and minimum mean square error equalizers for CIBS-CDMA are derived. Simulation results confirm that the proposed precoder is valid under the frequency selective fading.

We obtained blue photoluminescence from tantalum oxide films deposited by radio-frequency magnetron sputtering after annealing. The maximum peak intensity of the photoluminescence was observed from a sample annealed at 600 for 20 min, and the peak wavelength was approximately 430 nm. Tantalum oxide films that emit blue light may be useful materials for novel active optical devices utilizing Ta2O5/SiO2 multilayered photonic crystals.

This paper proposes a DCT-based steganographic method named StegErmelc in the JPEG domain. Three strategies are proposed, namely (i) edge-like block selection, (ii) recursive matrix encoding, and (iii) largest coefficient serving, to form a novel steganographic method for achieving scalable carrier capacity, low detectability by universal blind steganalyzer, and high image quality, simultaneously. For a given message length, StegErmelc flexibly scales its carrier capacity to accommodate the message while trading off with stego detectability. At full capacity, StegErmelc has comparable carrier capacity relative to the existing methods. When embedding the same amount of information, StegErmelc remarkably reduces the stego detection rate to about 0.3-0.5 lower than that of the existing methods considered, and consequently StegErmelc can withstand blind steganalyzer when embedding up to 0.10 bpc. Under the same condition, StegErmelc produces stego image with quality higher than that of the existing methods considered. Graphical comparison with three additional evaluation metrics is also presented to show the relative performance of StegErmelc with respect to the existing methods considered.

In this paper, we proposed a new high-rate oblique deposition method using two sputtering sources to obtain SiO2 films for a liquid crystal alignment layer. One sputtering source that operates in a metal mode supplies Si atoms to a substrate, and the other source that operates in an oxide mode supplies oxygen radicals to a substrate. To reduce the gas pressure of a deposition chamber and make the two sputtering sources operate in different modes, the sputtering sources were separated from the deposition chamber with stainless meshes, and Ar and oxygen gases were introduced separately through the two sputtering sources, i.e., Ar gas was introduced through the Si supply source and oxygen gas was introduced through the oxygen radical source. When Ar gas of 30 sccm and oxygen gas of 4 sccm were introduced into the system, the gas pressure of the deposition chamber was maintained below 1.7 mTorr and the films deposited at an incidence angle of more than 70 showed an elongated inclined columnar structure. Under this condition, a deposition rate of 30 nm/min was realized even at an incidence angle above 70, where most of the Si atoms incident to the substrate were supplied by the Si supply source and the oxygen radical source supplied oxygen radicals and promoted the oxidation of the film.

In this paper, we propose a method that uses Simulated Annealing (SA) to estimate the linear and nonlinear parameters of a closed-box loudspeaker system for implementing effective Mirror filters. The nonlinear parameters determined by W. Klippel's method are sometimes inaccurate and imaginary. In contrast, the proposed method can estimate the parameters with satisfactory accuracy due to its use of SA; the resulting impedance and displacement characteristics match those of an actual equivalent loudspeaker. A Mirror filter designed around these parameters can well compensate the nonlinear distortions of the loudspeaker system. Experiments demonstrate that the method can reduce the levels of nonlinear distortion by 5 dB to 20 dB compared to the before compensation condition.