This paper describes the advantages and disadvantages observed when describing complex parameterizable Artificial Neural Networks (ANNs) at the behavioral level using SystemC and at the Register Transfer Level (RTL) using VHDL. ANNs are complex to parameterize because they have a configurable number of layers, and each one of them has a unique configuration. This kind of structure makes ANNs, a priori, challenging to parameterize using Hardware Description Languages (HDL). Thus, it seems intuitively that ANNs would benefit from the raise in level of abstraction from RTL to behavioral level. This paper presents the results of implementing an ANN using both levels of abstractions. Results surprisingly show that VHDL leads to better results and allows a much higher degree of parameterization than SystemC. The implementation of these parameterizable ANNs are made open source and are freely available online. Finally, at the end of the paper we make some recommendation for future HLS tools to improve their parameterization capabilities.

A hardware description languages (HDLs) based modeling technique for asynchronous circuits is presented in this paper. A HDLs handshake package has been developed for expressing handshake-style digital systems in both VHDL and Verilog. Burst-mode and extended burst-mode (BM/XBM) circuits were used to demonstrate the usefulness of this work. This research successfully prototyped comparators, adders, RSA encoder/decoder, and several self-timed circuits for the full-custom IC and FPGAs designs. Furthermore, the HDLs handshake package implemented by this research can be utilized to develop behavioral test benches for studying and analyzing asynchronous designs. Extracting detailed timing information from asynchronous finite state machines (AFSMs), detecting delay faults for synthesized self-timed functional modules, and locating fundamental mode violation within realized AFSMs are proven applications. The anticipated HDL modeling technique and the transformation procedure are detailed in the rest of this paper.

Nowadays, the use of dependable systems is generalising, and diagnosis is an important step during their design . A diagnosis in early phases of the design cycle allows to save time and money. Fault injection can be used during the design process of the system, and using Hardware Description Languages, particularly VHDL, it is possible to accomplish this early diagnosis. During last years, the Time-Triggered Architecture (TTA) has emerged as a hard real-time fault-tolerant architecture for embedded systems. This novel architecture is gaining adepts mainly in the avionics and automotive industries ( x-by-wire ). The TTA implements a synchronous protocol with static scheduling that has been specifically targeted at hard real-time fault-tolerant distributed system. In this work, we present the study of the VHDL model of a communication controller based on the TTA, where a number of fault injection campaigns have been carried out. We comment the results produced and suggest some solutions to problems detected.

In this paper, we introduce a flexible design for intellectual property(IP) which has become important to design system LSI. The proposed IPs which have high flexibility for user requirement. The design priority is determined by setting parameters as the number of arithmetic unit, internal bitlength, clock speed and so on. The design time can thus be reduced. Designed IP is based on the reconfigurable architecture in which many structures can be dynamically selected. This paper shows a implementation of Frequency Response Masking digital filter(FRM) and Principal Components Analysis(PCA) using a reconfigurable architecture. We show the method to realize the designed circuit and the results of experiments using field programmable gate array(FPGA).

The motion estimation can choose the most suitable algorithm for different kinds of motion types, formats, and characteristics. The video encoding system can be optimized for quality, speed, and power consumption. In this paper, we propose a reconfigurable approach to a motion estimation algorithm and hardware architecture. The proposed algorithm determines motion type and then selects adapted block-matching algorithm for different kinds of motion sequences. The quality of our algorithm is better than that of the TSS and the BBGDS algorithm, or comparable to the performance of the better of the two, and the computational complexity of our algorithm is significantly less than that of the TSS. We also propose hardware architecture for realizing two kinds of motion estimations in the same hardware. We implemented the flexible and reconfigurable hardware architecture by using address generator unit, delay unit, and parameters and by using the hardware description language (VHDL) and the SYNOPSYS synthesis design tools. We analyze the performance of the algorithm and present adapted algorithm for a low cost real time application.

In this paper, characteristics of a digital system dedicated to the fast execution of the FDTD algorithm, widely used for electromagnetic simulation, are presented. Such system is conceived as a module communicating with a host personal computer via a PCI bus, and is based on a VLSI ASIC, which implements the "field-update" engine. The system structure is defined by means of a hardware description language, allowing to keep high-level system specification independent of the actual fabrication technology. A virtual implementation of the system has been carried out, by mapping such description in a standard-cell style on a commercial 0.35 µm technology. Simulations show that significant speed-up can be achieved, with respect to state-of-the-art software implementations of the same algorithm.

For FA (factory automation) and ATE (automatic test equipment) in the industrial area, the standard bus is required to increase the system performance of multiprocessor environment. VME (versa module european package format) bus is appropriated to the standard bus but has the features that is the small of package and the low density of board. Beside, the density of board and semiconductor have grown to become a significant issues that affect the development time, project cost and field diagnostics. To fit this trend, in this paper, the author composed Revision C. 1 (IEEE Std. P1014-1987) of the integrated environment for the main function such as arbitration, interrupt and interface between VMEbus and several control modules. Also the designed VME system controller is implemented on FPGA that can be located even into Slot 1. The control and function modules are coded with VHDL mid-fixed description method and then those operations are verified by simulation. As a result of experiment, the author confirmed that the most important about the operation of Bus timer that Bus error signal should occur within 56 µs, and both control and function modules have the reciprocal operation correctly. Thus, the constructed VHDL library will be able to apply the system based VMEbus and ASIC design.

In the hardware synthesis methods with high level languages such as C language, optimization quality of the compilers has a great influence on the area and speed of the synthesized circuits. Among hardware-oriented optimization methods required in such compilers, minimization of the bit length of the data-paths is one of the most important issues. In this paper, we propose an estimation algorithm of the necessary bit length of variables for this aim. The algorithm analyzes the control/data-flow graph translated from C programs and decides the bit length of each variable. On several experiments, the bit length of variables can be reduced by half with respect to the declared length. This method is effective not only for reducing the circuit area but also for reducing the delay of the operation units such as adders.

This paper presents a new approach to simulation of Dynamically Reconfigurable Logic (DRL) systems, which offers better accuracy of modelling dynamic reconfiguration than previously reported techniques. Our method, named Clock Morphing (CM), is based on modelling dynamic reconfiguration via a reconfigured module clock signal, while using a dedicated signal value to indicate dynamic reconfiguration. We discuss problems associated with the other approaches to DRL simulation and describe the main principles behind the proposed technique. We further demonstrate feasibility of a CM DRL simulation on its example implementation in VHDL.

Providing various assistances for design modifications on HDL source codes is important for design reuse and quick design cycle in VLSI CAD. Program slicing is a software-engineering technique for analyzing, abstracting, and transforming programs. We show algorithms for extracting/removing behaviors of specified signals in VHDL descriptions. We also describe a VHDL slicing system and show experimental results of efficiently extracting components from VHDL descriptions.

The analysis of an architecture may provide statistic information on the use of the resources and on the execution time. Some of these information need just a static analysis. Others, such as the execution time, may need dynamic analysis. Moreover as the computation time of behavioral descriptions (control step time unit) and RTL ones (cycle based) may differ a lot, unexpected architectures may be generated by behavioral synthesis. Therefore means to debug the results of behavioral synthesis are required. This paper introduces a new approach to integrate an interactive simulator within a behavioral synthesis tool, thereby allowing concurrent synthesis and simulation. The simulator and the behavioral synthesis are based on the same model. This model allows to link the behavioral description and the architecture produced by synthesis. This paper also discusses an implementation of this concept resulting in a simulator, called AMIS. This tool assists the designer for understanding the results of behavioral synthesis and for architecture exploration. It may also be used to debug the behavioral specification.

The Princeton University Behavioral Synthesis System (PUBSS) performs high-level synthesis on communicating processes. The compiler accepts models written in a subset of VHDL, but performs synthesis using a more specialized model, the behavior FSMs (BFSMs), for synthesis. The simulation semantics of VHDL presents challenges in describing behavior without overly constraining that behavior solely to make the simulation work. This paper describes mismatch between the simulation semantics provided by VHDL and the synthesis semantics required for high-level synthesis and describes how we solved these problems in PUBSS.

We Propose an integrated design and test assistance method for pipelined processors. Our approach generates behavioral-level test environments for pipeline control mechanisms from a machine-readable specification. It includes automatic generation of test programs and behavioral descriptions. Verification can be done by applying logic simulation to both the designers' descriptions and the behavioral descriptions, and then comparing the results. We have implemented an experimental system that enumerates all hazard patterns--instruction patterns that cause pipeline hazards--from the specifications, and generates the test programs and the behavioral descriptions for the pipeline controllers. The test programs cover all of the hazard patterns. The behavioral descriptions can manipulate any instruction stream. Experimental results for several RISC processors show that actual hazard patterns are too numerous to be easily enumerated by hand. Using workstations, our system can generate the test programs that cover all of the patterns, taking a few minutes. Results suggest that the system can be used to evaluate pipeline design.

A design system for a special purpose processor executing algorithms described by high level language is discussed. The system can generate an optimized architecture for the processor and also supply a specialized high level language compiler for the processor. A new optimization procedure is introduced to find effective functional blocks that can contribute to the improvement of performance. Functional blocks are found by simulation of the frequently appearing patterns of execution in the algorithm and used to yield a useful combined instruction.

This paper discusses the trends and future issues in hardware description languages (HDL's) and high-level synthesis systems. First the importance of HDL's and high-level synthesis is described. Then, several HDL's and related CAD systems are briefly introduced. Finally, the requirements to future HDL's and highlevel synthesis systems are discussed from several points of view.