This paper describes a method for estimating Direction Of Arrival (DOA) of multiple sound sources in full azimuth with three microphones. Estimating DOA with paired microphone arrays creates imaginary sound sources because of time delay of arrival (TDOA) being identical between real and imaginary sources. Imaginary sound sources can create chronic problems in multiple Sound Source Localization (SSL), because they can be localized as real sound sources. Our proposed approach is based on the observation that each microphone array creates imaginary sound sources, but the DOA of imaginary sources may be different depending on the orientation of the paired microphone array. With the fact that a real source would always be localized in the same direction regardless of the array orientation, we can suppress the imaginary sound sources by minimum filtering based on Steered Response Power – Phase Transform (SRP-PHAT) method. A set of experiments conducted in a real noisy environment showed that the proposed method was accurate in localizing multiple sound sources.

Fidelity Range Extension (FRExt) (i.e. High Profile) was added to the H.264/AVC recommendation in the second version. One of the features included in FRExt is the Adaptive Block-size Transform (ABT). In order to conform to the FRExt, a Fractional Motion Estimation (FME) architecture is proposed to support the 88/44 adaptive Hadamard Transform (88/44 AHT). The 88/44 AHT circuit contributes to higher throughput and encoding performance. In order to increase the utilization of SATD (Sum of Absolute Transformed Difference) Generator (SG) in unit time, the proposed architecture employs two 8-pel interpolators (IP) to time-share one SG. These two IPs can work in turn to provide the available data continuously to the SG, which increases the data throughput and significantly reduces the cycles that are needed to process one Macroblock. Furthermore, this architecture also exploits the linear feature of Hadamard Transform to generate the quarter-pel SATD. This method could help to shorten the long datapath in the second-step of two-iteration FME algorithm. Finally, experimental results show that this architecture could be used in the applications requiring different performances by adjusting the supported modes and operation frequency. It can support the real-time encoding of the seven-mode 4 K2 K@24 fps or six-mode 4 K2 K@30 fps video sequences.

This paper presents analysis and design of a new ultra-low voltage analog front end (AFE) dedicated to strain sensor applications. The AFE, designed in 0.18 µm CMOS process, features a chopper-stabilized instrumentation amplifier (IA), a balanced active MOSFET-C 2nd order low pass filter (LPF), a clock generator and a voltage booster which operate at supply voltage (Vdd) of 0.6 V. The designed IA achieves 30 dB of closed-loop gain, 101 dB of common-mode rejection ratio (CMRR) at 50 Hz, 80 dB of power-supply rejection ratio (PSRR) at 50 Hz, thermal noise floor of 53.4 nV/, current consumption of 14 µA, and noise efficiency factor (NEF) of 9.7. The high CMRR and rail-to-rail output swing capability is attributed to a new low voltage realization of the active-bootstrapped technique using a pseudo-differential gain-boosting operational transconductance amplifier (OTA) and proposed current-driven bulk (CDB) biasing technique. An output capacitor-less low-dropout regulator (LDO), with a new fast start-up LPF technique, is used to regulate this 0.6 V supply from a 0.8–1.0 V energy harvesting power source. It achieves power supply rejection (PSR) of 42 dB at frequency of 1 MHz. A cascode compensated pseudo differential amplifier is used as the filter's building block for low power design. The filter's single-ended-to-balanced converter is implemented using a new low voltage amplifier with two-stage common-mode cancellation. The overall AFE was simulated to have 65.6 dB of signal-to-noise ratio (SNR), total harmonic distortion (THD) of less than 0.9% for a 100 Hz sinusoidal maximum input signal, bandwidth of 2 kHz, and power consumption of 51.2 µW. Spectre RF simulations were performed to validate the design using BSIM3V3 transistor models provided by GLOBALFOUNDRIES 0.18 µm CMOS process.

An adaptive rate controller (ARC) based on an adaptive neural fuzzy inference system (ANFIS) is designed to autonomously adjust the data rate of a mobile heterogeneous network to adapt to the changing traffic load and the user speed for multimedia call services. The effect of user speed on the handoff rate is considered. Through simulations, it has been demonstrated that the ANFIS-ARC is able to maintain new call blocking probability and handoff failure probability of the mobile heterogeneous network below a prescribed low level over different user speeds and new call origination rates while optimizing the average throughput. It has also been shown that the mobile cognitive wireless network with the proposed CS-ANFIS-ARC protocol can support more traffic load than neural fuzzy call-admission and rate controller (NFCRC) protocol.

When a cognitive radio system dynamically utilizes a frequency band, channel control information must be communicated over the network in order for the currently available carrier frequencies to be shared. In order to keep efficient spectrum utilization, this control information should also be dynamically transmitted through channels such as cognitive pilot channels based on the channel conditions. If transmitters dynamically select carrier frequencies, receivers must receive the control signal without knowledge of its carrier frequencies. A novel scheme called differential code parallel transmission (DCPT) enables receivers to receive low-rate information without any knowledge of the carrier frequency. The transmitter simultaneously transmits two signals whose carrier frequencies are separated by a predefined value. The absolute values of the carrier frequencies can be varied. When the receiver receives the DCPT signal, it multiplies the signal by a frequency-shifted version of itself; this yields a DC component that represents the data signal, which is then demodulated. However, the multiplication process results in the noise power being squared, necessitating high received signal power. In this paper, to realize a bandpass filter that passes only DCPT signals of unknown frequency and that suppresses noise and interference at other frequencies, a DCPT-adaptive bandpass filter (ABF) that employs an adaptive equalizer is proposed. In the training phase, the received signal is the filter input and the frequency-shifted signal is the training input. Then, the filter is trained to pass the higher-frequency signal of the two DCPT signals. The performance of DCPT-ABF is evaluated through computer simulations. We find that DCPT-ABF operates successfully even under strong interference.

This paper discusses a wireless control system for cooperative motion of multiple machines, and clarifies the influence of packet losses on the system behavior. We focus on the synchronization of the motion of the machines, and using the nature of wireless, we propose a new wireless control scheme for maintaining the synchronization performance under packet loss conditions. In the proposed scheme, each controlled object (plant) utilizes control information destined for all plants, and the main controller also utilizes state information of all plants. The additional information of the other controller-plant pairs is used to compensate lost information. As an example of the controlled plants, rotary inverted pendulums, which move synchronously with wireless connections in their control-feedback loops, are considered. Numerical examples confirm the superiority of the proposed scheme from the view-point of the synchronization of the motion of the plants.

This paper proposes an adaptive bandwidth control scheme for the private wireless networks. Carrier sense multiple access with collision avoidance (CSMA/CA), which is commonly used within the private networks, is not efficient in terms of spectral efficiency due to its strict collision avoidance process. In order to relax the collision avoidance rule, this paper employs dynamic spectrum control (DSC), in which a certain number of discrete spectra having the higher channel gain is selected in a selfish manner with each link allowing a partial band interference. Such interference may be suppressed by the equalizer at the receiver. Aiming at optimal selection of the bandwidth for the selfish DSC according to channel realizations, in the sense of throughput maximization, this paper proposes a channel capacity maximization-based BAR control scheme. Computer simulations validate that the proposed scheme achieves high throughput efficiency.

TCP Reno is not fully utilized in under-buffered links. We propose a new TCP congestion control algorithm that can utilize the link almost up to 100% except the first congestion avoidance cycle. Our scheme estimates the minimum congestion window size for full link utilization in every congestion avoidance cycle and sends extra packets without touching TCP Reno congestion control. It has the same RTT fairness and the same saw-tooth wave as TCP Reno does. Our scheme does not affect competing TCP Reno flows since it uses only unused link capacity. We provide a simple mathematical modeling as well as ns-2 simulation results which show that the link utilization is improved by up to 19.88% for k=1/8 against TCP Reno when the buffer is k times the optimal buffer size. We claim that our scheme is useful for transmitting large amount of data in under-buffered links.

This paper provides an overview on the recent research on networked control with an emphasis on the tight relation between the two fields of control and communication. In particular, we present several results focusing on data rate constraints in networked control systems, which can be modeled as quantization of control-related signals. The motivation is to reduce the amount of data rate as much as possible in obtaining control objectives such as stabilization and control performance under certain measures. We also discuss some approaches towards control problems based on techniques from signal processing and information theory.

In remote control, efficient compression or representation of control signals is essential to send them through rate-limited channels. For this purpose, we propose an approach of sparse control signal representation using the compressive sampling technique. The problem of obtaining sparse representation is formulated by cardinality-constrained 2 optimization of the control performance, which is reducible to 1-2 optimization. The low rate random sampling employed in the proposed method based on the compressive sampling, in addition to the fact that the 1-2 optimization can be effectively solved by a fast iteration method, enables us to generate the sparse control signal with reduced computational complexity, which is preferable in remote control systems where computation delays seriously degrade the performance. We give a theoretical result for control performance analysis based on the notion of restricted isometry property (RIP). An example is shown to illustrate the effectiveness of the proposed approach via numerical experiments.

Zero-knowledge arguments allows one party to prove that a statement is true, without leaking any other information than the truth of the statement. In many applications such as verifiable shuffle (as a practical application) and circuit satisfiability (as a theoretical application), zero-knowledge arguments for mathematical statements related to linear algebra are essentially used. Groth proposed (at CRYPTO 2009) an elegant methodology for zero-knowledge arguments for linear algebraic relations over finite fields. He obtained zero-knowledge arguments of the sub-linear size for linear algebra using reductions from linear algebraic relations to equations of the form z=x*'y, where x, y ∈ Fnp are committed vectors, z ∈ Fp is a committed element, and *': FnpFnpFp is a bilinear map. These reductions impose additional rounds on zero-knowledge arguments of the sub-linear size. The round complexity of interactive zero-knowledge arguments is an important measure along with communication and computational complexities. We focus on minimizing the round complexity of sub-linear zero-knowledge arguments for linear algebra. To reduce round complexity, we propose a general transformation from a t-round zero-knowledge argument, satisfying mild conditions, to a (t-2)-round zero-knowledge argument; this transformation is of independent interest.

In a wireless multi-hop network between a source node (S) and a destination node (D), multipath routing in which S redundantly sends the same packets to D through multiple routes at the same time is effective for enhancing the reliability of the wireless data transmission by means of route diversity. However, when applying the multipath routing to a factory where huge robots are moving around, if closer multiple routes are selected, the probability that they are blocked by the robots at the same time becomes higher, so the reliability in terms of packet loss rate cannot be enhanced. In this paper, we propose a multipath routing method which can select physically distant multiple routes without any knowledge on the locations of nodes. We introduce a single metric composed of “the distance between routes” and “the route quality” by means of scalarization in multi-objective maximization problem and apply a genetic algorithm (GA) for searching for adequate routes which maximize the metric. Computer simulation results show that the proposed method can adaptively control the topologies of selected routes between S and D, and effectively reduce the packet loss rates.

This letter proposes a novel connected dominanting set based decentralized cooperative spectrum sensing algorithm for cognitive radio networks. It is analytically shown that the proposed algorithm distributively converges to the average consensus as that of traditional distributed consensus algorithm, while reducing both the convergence time and message complexity significantly.

We estimated the transit time of GaInAs/AlAs double-barrier resonant tunneling diodes (RTDs) oscillating at 0.6–1 THz. The RTDs have graded emitter structures and thin barriers, and are integrated with planar slot antennas for the oscillation. The transit time across the collector depletion region was estimated from measured results of the dependence of oscillation frequency on RTD mesa area. The estimated transit time was slightly reduced with the introduction of the graded emitter, probably due to reduction of the electron transition between Γ and L bands resulted from the low electric field in the collector depletion region.

A generation effect of higher harmonics for an externally applied signal in a photoconductive (PC) terahertz (THz)-wave emitter has been found. This effect is applicable to accurately measuring for frequencies of THz waves. This paper describes reasons why higher harmonics are generated in a PC device. The dependence of the photoconductance on the applied voltage in the PC device consists of a flat range and a negative slant range, and one sharply bending point is then formed at the boundary between the flat and slant ranges. When the PC device is irradiated by two laser beams with slightly different optical frequencies, the photoconductance is strongly modulated at the optical beat frequency in the THz region by photomixing the two laser beams. As a result, three bending points are formed in the average photoconductance (introduced as the average of the temporal photoconductance varying at the THz frequency). The slants comprised of the three bending points are different from each other. When the variation range of the applied voltage driven by the signal input on the biased voltage covers the voltage of one of the bending points, the photoconductance (or the average photoconductance in optical beating) varies along the different two slopes, the resultant temporal photocurrent is largely distorted, and then the harmonics of the signal input are generated in the photocurrent. The following features are clarified: (1) the harmonics of the signal input are generated by appropriately adjusting the bias voltage and the amplitude of the signal input, regardless of the presence/absence of optical beating; (2) the efficiency of the harmonic generation is about 10-4 -10-5; and (3) the harmonics over 35th order with almost flat amplitudes (-3.8 dB/octave) are generated.

In this paper, we investigate two improved turbo receivers for the Long Term Evolution (LTE) uplink in the presence of transmitter (Tx) in-phase and quadrature-phase imbalance (IQI) with parameters known at eNodeB. For multiuser multiple-input multiple-output (MU-MIMO) single-carrier frequency division multiple access (SC-FDMA) systems, we derive a optimal joint linear minimum mean square error (MMSE) turbo multiuser detector (MUD) based on the mirror symmetry clusters. For the single use SC-FDMA system with Tx IQI, we derive an optimal widely linear MMSE (WLMMSE) turbo equalizer. Both receivers are implemented in the discrete frequency domain and only slightly increase the computational complexity compared to the conventional turbo receivers. Monte Carlo simulations show that the proposed receivers significantly outperform the conventional turbo receivers. The simulation results are then confirmed by the extrinsic information transfer (EXIT) chart analysis.

The present status of superconducting terahertz emitter using the intrinsic Josephson junctions in high-Tc superconductor Bi2Sr2CaCu2O8+δ is reviewed. Fabrication methods of the emitting device, electrical and optical characteristics of them, synchronizing operation of two emitters and an example of applications to the terahertz imaging will be discussed. After the description of fabrication techniques by an Argon ion milling with photolithography or metal masks and by a focused ion beam, optical properties of radiation spectra, the line width, polarization and the spatial distribution of emission are presented with some discussion on the operation mechanism. For electrical properties, reversible and irreversible operations at high and low electrical currents, respectively, and electrical modulation of the radiation intensity for terahertz imaging are presented.

In the present paper, we address the problem of extrapolating group proximities from member relations, which we refer to as the group proximity problem. We assume that a relational dataset consists of several groups and that pairwise relations of all members can be measured. Under these assumptions, the goal is to estimate group proximities from pairwise relations. In order to solve the group proximity problem, we present a method based on embedding and distribution mapping, in which all relational data, which consist of pairwise dissimilarities or dissimilarities between members, are transformed into vectorial data by embedding methods. After this process, the distributions of the groups are obtained. Group proximities are estimated as distances between distributions by distribution mapping methods, which generate a map of distributions. As an example, we apply the proposed method to document and bacterial flora datasets. Finally, we confirm the feasibility of using the proposed method to solve the group proximity problem.

This paper proposes a scalable active optical access network using high-speed Plumbum Lanthanum Zirconate Titanate (PLZT) optical switch/splitter. The Active Optical Network, called ActiON, using PLZT switching technology has been presented to increase the number of subscribers and the maximum transmission distance, compared to the Passive Optical Network (PON). ActiON supports the multicast slot allocation realized by running the PLZT switch elements in the splitter mode, which forces the switch to behave as an optical splitter. However, the previous ActiON creates a tradeoff between the network scalability and the power loss experienced by the optical signal to each user. It does not use the optical power efficiently because the optical power is simply divided into 0.5 to 0.5 without considering transmission distance from OLT to each ONU. The proposed network adopts PLZT switch elements in the variable splitter mode, which controls the split ratio of the optical power considering the transmission distance from OLT to each ONU, in addition to PLZT switch elements in existing two modes, the switching mode and the splitter mode. The proposed network introduces the flexible multicast slot allocation according to the transmission distance from OLT to each user and the number of required users using three modes, while keeping the advantages of ActiON, which are to support scalable and secure access services. Numerical results show that the proposed network dramatically reduces the required number of slots and supports high bandwidth efficiency services and extends the coverage of access network, compared to the previous ActiON, and the required computation time for selecting multicast users is less than 30 msec, which is acceptable for on-demand broadcast services.

With the development of COMPASS system, finding suitable and efficient multiplexing solutions have become important for the system signal design. In this paper, based on the alternative BOC (AltBOC) modulation technique, the multiplexing scheme for COMPASS Phase II B1 signals is proposed. Then, to combine all COMPASS Phase III (CP III) B1 components into a composite signal with constant envelope, the generalized majority voting (GMV) technique is employed based on the characteristics of CP III B1 signals. The proposed multiplexing schemes also provide potential opportunities for GNSS modernization and construction, such as GPS, Galileo, etc.