This paper proposes a non-linear overloaded MIMO detector that outperforms the conventional soft-input maximum likelihood detector (MLD) with less computational complexity. We propose iterative log-likelihood ratio (LLR) estimation and multi stage LLR estimation for the proposed detector to achieve such superior performance. While the iterative LLR estimation achieves better BER performance, the multi stage LLR estimation makes the detector less complex than the conventional soft-input maximum likelihood detector (MLD). The computer simulation reveals that the proposed detector achieves about 0.6dB better BER performance than the soft-input MLD with about half of the soft-input MLD's complexity in a 6×3 overloaded MIMO OFDM system.

For massive multiple-input multiple-output (MIMO) communication systems, simple linear detectors such as zero forcing (ZF) and minimum mean square error (MMSE) can achieve near-optimal detection performance with reduced computational complexity. However, such linear detectors always involve complicated matrix inversion, which will suffer from high computational overhead in the practical implementation. Due to the massive parallel-processing and efficient hardware-implementation nature, the neural network has become a promising approach to signal processing for the future wireless communications. In this paper, we first propose an efficient neural network to calculate the pseudo-inverses for any type of matrices based on the improved Newton's method, termed as the PINN. Through detailed analysis and derivation, the linear massive MIMO detectors are mapped on PINNs, which can take full advantage of the research achievements of neural networks in both algorithms and hardwares. Furthermore, an improved limited-memory Broyden-Fletcher-Goldfarb-Shanno (L-BFGS) quasi-Newton method is studied as the learning algorithm of PINNs to achieve a better performance/complexity trade-off. Simulation results finally validate the efficiency of the proposed scheme.

We present an effective system for integrating generative zero-shot classification modules into a YOLO-like dense detector to detect novel objects. Most double-stage-based novel object detection methods are achieved by refining the classification output branch but cannot be applied to a dense detector. Our system utilizes two paths to inject knowledge of novel objects into a dense detector. One involves injecting the class confidence for novel classes from a classifier trained on data synthesized via a dual-step generator. This generator learns a mapping function between two feature spaces, resulting in better classification performance. The second path involves re-training the detector head with feature maps synthesized on different intensity levels. This approach significantly increases the predicted objectness for novel objects, which is a major challenge for a dense detector. We also introduce a stop-and-reload mechanism during re-training for optimizing across head layers to better learn synthesized features. Our method relaxes the constraint on the detector head architecture in the previous method and has markedly enhanced performance on the MSCOCO dataset.

This paper presents a high-NIR sensitivity SOI-gate lock-in pixel with improved modulation contrast. The proposed pixel has a shallow buried channel and intermediate gates to create both a high lateral electric field and a potential barrier to parasitic light sensitivity. Device simulation results showed that parasitic light sensitivity reduced from 13.7% to 0.13% compared to the previous structure.

This paper proposes a novel approach to low complexity soft input decoding for lattice reduction-aided MIMO receivers. The proposed approach feeds a soft input decoder with soft signals made from hard decision signals generated by using a lattice reduction-aided linear detector. The soft signal is a weighted-sum of some candidate vectors that are near by the hard decision signal coming out from the lattice reduction-aided linear detector. This paper proposes a technique to adjust the weight adapt to the channel for the higher transmission performance. Furthermore, we propose to introduce a coefficient that is used for the weights in order to enhance the transmission performance. The transmission performance is evaluated in a 4×4 MIMO channel. When a linear MMSE filter or a serial interference canceller is used as the linear detector, the proposed technique achieves about 1.0dB better transmission performance at the BER of 10-5 than the decoder fed with the hard decision signals. In addition, the low computational complexity of the proposed technique is quantitatively evaluated.

Bolts in the bogie box of metro vehicles are fasteners which are significant for bogie box structure. Effective loosening bolts detection in early stage can avoid the bolt loss and accident occurrence. Recently, detection methods based on machine vision are developed for bolt loosening. But traditional image processing and machine learning methods have high missed rate and false rate for bolts detection due to the small size and complex background. To address this problem, a loosening bolts defection method based on deep learning is proposed. The proposed method cascades two stages in a coarse-to-fine manner, including location stage based on the Single Shot Multibox Detector (SSD) and the improved SSD sequentially localizing the bogie box and bolts and a semantic segmentation stage with the U-shaped Network (U-Net) to detect the looseness of the bolts. The accuracy and effectiveness of the proposed method are verified with images captured from the Shanghai Metro Line 9. The results show that the proposed method has a higher accuracy in detecting the bolts loosening, which can guarantee the stable operation of the metro vehicles.

Pedestrian detection is a significant task in computer vision. In recent years, it is widely used in applications such as intelligent surveillance systems and automated driving systems. Although it has been exhaustively studied in the last decade, the occlusion handling issue still remains unsolved. One convincing idea is to first detect human body parts, and then utilize the parts information to estimate the pedestrians' existence. Many parts-based pedestrian detection approaches have been proposed based on this idea. However, in most of these approaches, the low-quality parts mining and the clumsy part detector combination is a bottleneck that limits the detection performance. To eliminate the bottleneck, we propose Discriminative Part CNN (DP-CNN). Our approach has two main contributions: (1) We propose a high-quality body parts mining method based on both convolutional layer features and body part subclasses. The mined part clusters are not only discriminative but also representative, and can help to construct powerful pedestrian detectors. (2) We propose a novel method to combine multiple part detectors. We convert the part detectors to a middle layer of a CNN and optimize the whole detection pipeline by fine-tuning that CNN. In experiments, it shows astonishing effectiveness of optimization and robustness of occlusion handling.

This paper demonstrates that a 360° radio-frequency phase detector consisting of a combination of symmetrical mixers and 45° phase shifters with tunable devices can achieve a low phase-detection error over a wide frequency range. It is shown that the phase detection error does not depend on the voltage gain of the 45° phase shifter. This allows the usage of tunable devices as 45° phase shifters for a wide frequency range with low phase-detection errors. The fabricated phase detector having tunable low-pass filters as the tunable device demonstrates phase detection errors lower than 2.0° rms in the frequency range from 3.0 GHz to 10.5 GHz.

One of the highest performing single-photon detectors in the visible and near-infrared regions is the superconducting nanostrip photon detector (SNSPD or SSPD), which usually uses NbN or NbTiN as the superconductor. Using other superconductors may significantly improve, for example, the operating temperature and count rate characteristics. This paper briefly reviews the current state of the potential, characteristics, thin film growth, and nanofabrication process of SNSPD using various superconductors.

A temperature-variation-tolerant intermittent startup circuit (ISC) that suppresses quiescent current to 300nA at 0.48V was developed. The ISC is a key circuit for a batteryless wireless sensor that can detect a 1μA generation current of energy harvesting sources from the intervals of wireless signals. The ISC consists of an ultralow-voltage detector composed of a depletion-type MOSFET and low-Vth MOSFETs, a Dickson-type gate-boosted charge pump circuit, and a power-switch control circuit. The detector consists of a voltage reference comparator and a feedback-controlled latch circuit for a hysteresis function. The voltage reference comparator, which has a common source stage with a folded constant-current-source load composed of a depletion-type nMOSFET, makes it possible to reduce the temperature dependency of the detection voltage, while suppressing the quiescent current to 300nA at 0.48V. The ISC fabricated with fully-depleted silicon-on-insulator (FD-SOI) CMOS technology also suppresses the variation of the quiescent current. To verify the effectiveness of the circuit, the ISC was fabricated in a 0.8-μm triple-Vth FD-SOI CMOS process. An experiment on the fabricated system, the ISC boosts the input voltage of 0.48V to 2.4V while suppressing the quiescent current to less than 300nA at 0.48V. The measured temperature coefficient of the detection voltage was ±50ppm/°C. The fluctuation of the quiescent current was 250nA ± 90nA in the temperature range from 0°C to 40°C. An intermittent energy harvesting sensor with the ISC was also fabricated. The sensor could detect a generation current of 1μA at EH sources within an accuracy of ±15% in the temperature range from 0°C to 40°C. It was also successfully applied to a self-powered wireless plant-monitoring sensor system.

Vehicle logo detection technology is one of the research directions in the application of intelligent transportation systems. It is an important extension of detection technology based on license plates and motorcycle types. A vehicle logo is characterized by uniqueness, conspicuousness, and diversity. Therefore, thorough research is important in theory and application. Although there are some related works for object detection, most of them cannot achieve real-time detection for different scenes. Meanwhile, some real-time detection methods of single-stage have performed poorly in the object detection of small sizes. In order to solve the problem that the training samples are scarce, our work in this paper is improved by constructing the data of a vehicle logo (VLD-45-S), multi-stage pre-training, multi-scale prediction, feature fusion between deeper with shallow layer, dimension clustering of the bounding box, and multi-scale detection training. On the basis of keeping speed, this article improves the detection precision of the vehicle logo. The generalization of the detection model and anti-interference capability in real scenes are optimized by data enrichment. Experimental results show that the accuracy and speed of the detection algorithm are improved for the object of small sizes.

Superconducting detectors have been shown to be superior to other techniques in some applications. However, superconducting devices have not been used for detecting neutrons often in the past decades. We have been developing various superconducting neutron detectors. In this paper, we review our attempts to measure neutrons using superconducting stripline detectors with DC bias currents. These include attempts with a MgB2-based detector and a Nb-based detector with a 10B converter.

This paper proposes a successive interference cancellation (SIC) of independent component analysis (ICA) aided spatial division multiple access (SDMA) for Gaussian filtered frequency shift keying (GFSK) in Bluetooth low energy (BLE) systems. The typical SDMA scheme requires estimations of channel state information (CSI) using orthogonal pilot sequences. However, the orthogonal pilot is not embedded in the BLE packet. This fact motivates us to add ICA detector into BLE systems. In this paper, focusing on the covariance matrix of ICA outputs, SIC can be applied with Cholesky decomposition. Then, in order to address the phase ambiguity problems created by the ICA process, we propose a differential detection scheme based on the MAP algorithm. In practical scenarios, it is subject to carrier frequency offset (CFO) as well as symbol timing offset (STO) induced by the hardware impairments present in the BLE peripherals. The packet error rate (PER) performance is evaluated by computer simulations when BLE peripherals simultaneously communicate in the presence of CFO and STO.

A lumped element kinetic inductance detector (LeKID) relying on a superconducting resonator is a promising candidate for sensing high energy particles such as neutrinos, X-rays, gamma-rays, alpha particles, and the particles found in the dark matter owing to its large-format capability and high sensitivity. To develop a high energy camera, we formulated design rules based on the experimental results from niobium (Nb)-based LeKIDs at 1 K irradiated with alpha-particles of 5.49 MeV. We defined the design rules using the electromagnetic simulations for minimizing the crosstalk. The neighboring pixels were fixed at 150 µm with a frequency separation of 250 MHz from each other to reduce the crosstalk signal as low as the amplifier-limited noise level. We examined the characteristics of the Nb-based resonators, where the signal decay time was controlled in the range of 0.5-50 µs by changing the designed quality factor of the detectors. The amplifier noise was observed to restrict the performance of our device, as expected. We improved the energy resolution by reducing the filling factor of inductor lines. The best energy resolution of 26 for the alpha particle of 5.49 MeV was observed in our device.

Superconducting nanowire single-photon detectors(SSPDs or SNSPDs) can detect single photons in a wide spectrum range from ultraviolet to mid-infrared wavelengths. We developed SSPDs for the light wavelength of 900-1100 nm, where it is difficult to achieve high detection efficiency by either Si or InGaAs avalanche photodiodes. We designed and fabricated the SSPD with non-periodic dielectric multilayers (DMLs) composed of SiO2 and TiO2 to enhance the optical absorptance in the wavelength range of 900-1100 nm. We measured the detection efficiency (DE) in the wavelength range of 800-1360 nm using a supercontinuum light source and found that the wavelength dependence of DE was in good agreement with the simulated spectrum of the optical absorptance of the nanowire device on the designed DML. The highest system DE was 81.0% for the wavelength of 980 nm.

In this paper, an improved charge pump (CP) and a modified nonlinear phase frequency detector (PFD) are designed and fabricated in a 90-nm CMOS process. The CP is optimized with a combination of circuit techniques such as pedestal error cancel scheme to eliminate the charge injection and the other non-ideal characteristics. The nonlinear PFD is based on a modified circuit topology to enhance the acquisition capability of the PLL. The optimized CP and nonlinear PFD are integrated into a Ka-band PLL. The measured output current mismatch ratio of the improved CP is less than 1% when the output voltage Vout fluctuates between 0.2 to 1.1V from a 1.2V power supply. The measured phase error detection range of the modified nonlinear PFD is between -2π and 2π. Owing to the modified CP and PFD, the measured reference spur of the Ka-band PLL frequency synthesizer containing the optimized CP and PFD is only -56.409dBc at 30-GHz at the locked state.

To solve the problem of nonhomogeneous clutter suppression for moving target detection in High Frequency Surface Wave Radar (HFSWR), a novel nonhomogeneous clutter detector (NHD) is present in this paper. This novel NHD makes an analysis for the clutter constituents with single snapshot based on the over-determined linear equations in space-time adaptive processing (STAP) and distinguish the nonhomogeneous secondary data from the whole secondary data set through calculating the correlation coefficients of the secondary data.

We propose an object detector using a sliding window method for an event-driven camera which outputs a subtracted frame (usually a binary value) when changes are detected in captured images. Since sliding window skips unchanged portions of the output, the number of target object area candidates decreases dramatically, which means that our system operates faster and with lower power consumption than a system using a straightforward sliding window approach. Since the event-driven camera output consists of binary precision frames, an all binarized convolutional neural network (ABCNN) can be available, which means that it allows all convolutional layers to share the same binarized convolutional circuit, thereby reducing the area requirement. We implemented our proposed method on the Xilinx Inc. Zedboard and then evaluated it using the PETS 2009 dataset. The results showed that our system outperformed BCNN system from the viewpoint of detection performance, hardware requirement, and computation time. Also, we showed that FPGA is an ideal method for our system than mobile GPU. From these results, our proposed system is more suitable for the embedded systems based on stationary cameras (such as security cameras).

Superconducting nanowire single-photon detector(SNSPD) has been one of the important ingredients for photonic quantum information processing (QIP). In order to see the potential of SNSPDs, I briefly review recent progresses of the photonic QIP with SNSPDs implemented for various purposes and present a possible direction for the development of SNSPDs.

Intensity modulated radiation therapy (IMRT), which irradiates doses to a target organ, calculates the irradiation dose using the radiation treatment planning system (RTPS). The irradiation quality is ensured by verifying that the dose distribution planned by RTPS is the same as the data measured by two-dimensional (2D) detectors. Since an actual three-dimensional (3D) distribution of irradiated dose spreads complicatedly, it is different from that of RTPS. Therefore, it is preferable to evaluate by using not only RTPS, but also actual irradiation dose distribution. In this paper, in order to perform a dose-volume histogram (DVH) evaluation of the irradiation dose distribution, we propose a method of correcting the dose distribution of RTPS by using sparsely measured radial data from 2D dose detectors. And we perform a DVH evaluation of irradiation dose distribution and we show that the proposed method contributes to high-precision DVH evaluation. The experimental results show that the estimates are in good agreement with the measured data from the 2D detectors and that the peak signal to noise ratio and the structural similarity indexes of the estimates are more accurate than those of RTPS. Therefore, we present the possibility of an evaluation of the actual irradiation dose distribution using measured data in a limited observation direction.