In this work, we review our recent efforts to make effective use of atomistic calculations for the advancement of VLSI process simulation. We focus on three example applications: the behavior of implanted fluorine, arsenic diffusion and activation, and the impact of charge interactions on doping fluctuations.

A novel fast calculation algorithm (FCA) for calculating the decision metric of the multiple-symbol differential detection (MSDD) considering the autocorrelation of a received sequence is proposed. In correspondence to the star quadrature amplitude modulation (QAM), the M algorithm is adopted to MSDD over Rayleigh fading channels, in order to reduce the number of search paths. The computational complexity of the decision metric can be greatly reduced by the proposed FCA and the M algorithm. Through computer simulations, it is confirmed that the symbol error rate (SER) performance of the MSDD considering autocorrelation is closer to that of the ideal coherent detection as the length of an observed sequence becomes larger over Rayleigh fading channels.

For tracking electromigration induced evolution of voids a diffuse interface model is applied. We assume an interconnect as two-dimensional electrically conducting via which contains initially a circular void. The diffuse interface governing equation was solved applying a finite element scheme with a robust local grid adaptation algorithm. Simulations were carried out for voids exposed to high current. An influence of the void dynamics on the resistance of interconnect is investigated. In the case of the interconnect via it was shown that a migrating void exactly follows the current flow, retaining its stability, but due to change of shape and position causes significant fluctuations in interconnect resistance.

In this work it is shown for the first time how to calculate in advance by momentum-based noise simulation for stationary Monte Carlo (MC) device simulations the CPU time, which is necessary to achieve a predefined error level. In addition, analytical expressions for the simulation-time factor of terminal current estimation are given. Without further improvements of the MC algorithm MC simulations of small terminal currents are found to be often prohibitively CPU intensive.

The implant-anneal cycle for B doping during Si device fabrication causes transient enhanced diffusion (TED) of B and the formation of small immobile B-interstitial clusters (BICs) which deactivate the B. Additionally, since modern ultrashallow devices put most of the B in immediate proximity of the Si/SiO2 interface, interface-dopant interactions like segregation become increasingly important. In this work, we use density-functional theory calculations to study TED, clustering, and segregation of B during annealing and discuss a continuum model which combines the TED and clustering results.

In the past, enhancement techniques for the end-to-end quality of a networked application were studied by looking at each individual layer. Examples of such techniques include the error resilience/concealment methods in the application layer, the FEC/ARQ in the transport layer, and the Quality of Service (QoS) techniques in the network layers. However, an integrated approach that would look across all related layers had yet to be investigated. This paper proposes an approach that combines priority-aware video packetization, adaptively used layered FEC, and QoS controlled networks such as IntServ and DiffServ in order to provide an efficient end-to-end quality in layered streaming video. The combination is more efficient in terms of a simple network price mechanism, that is, in getting the best end-to-end quality under a given total cost constraint. Our proposed approach in DiffServ with video packet (VP) data-splitting and layered FEC guarantees minimal service quality in a scalable and cost effective manner without introducing resource reservation. For video, we also propose performance metrics such as corrupted/frozen frame ratio (CFR, FFR). These provide objective metrics like PSNR as well as a measurement for subjective perceptions. Our approach, which combines related layers such as video coding, transport, and network, has yielded results that have proven to be more cost-effective and practical than the supporting network QoS.

Class-based delay differentiation model has been recently proposed as a part of relative differentiated services frameworks, and it is shown that the model can provide delay differentiation without admission control and end-to-end resource reservation. In this paper, however, we observe that there can be inconsistent delay differentiation caused by different size of packets. We propose packet size-based delay differentiation model and show that packet size-based queueing is effective to achieve equal delay within a class and provide consistent delay differentiation between classes through simulations. Simulation results also show that the proposed model improves jitter characteristics of CBR flows.

In this paper, is shown an approach to realize leapfrog structures obtained from proto-type passive RLC ladder filters using current differencing buffered amplifiers (CDBA) as active elements. The use of the CDBA's provides advantages that the realization procedure is simplified and the number of active components required is reduced. The approach is quite suitable for the realization of band-pass ladder filters, which generally requires a complicated structure to simulate LC series and/or parallel resonant branches by the conventional opamp-based leapfrog filters. A simple circuit configuration of the CDBA suitable for high frequency and low power supply voltage applications is also presented. As design examples, a fifth-order Butterworth lowpass ladder filter and a sixth-order Chebyshev bandpass ladder filter are designed. The effectiveness and the correctness of the proposed approach and the characteristics of the proposed filters are verified and examined through computer simulation.

To increase the discriminating ability of the speech feature based on linear predictive coding (LPC) and increase its noise robustness, an SNR-dependent arcsin transform is applied to the autocorrelation sequence (ACS) of each analysis frame in a speech signal. Moreover, each component in the ACS is also weighted by the normalized reciprocal of the average magnitude difference function (AMDF) for emphasizing its peak structure. Experimental results for the task of Mandarin digit recognition indicate that the LPC speech feature employing the proposed scheme is more robust than some widely used LPC-based approaches over a wide range of SNR values.

This paper presents a framework for modeling and mixed-mode simulation of circuits/interconnects and electromagnetic (EM-) radiations. The proposed framework investigates the signal integrity in VLSI chips, packages and wiring boards at the GHz-band level, and verifies the electromagnetic interference (EMI) and the electromagnetic compatibility (EMC) of high-speed systems. In our framework, the frequency characteristics of interconnects and EM-radiations are extracted by the full-wave FDTD simulation. The macromodels of interconnects are synthesized as SPICE subcircuits, and the impulse responses of EM-radiations are stored in the database. Once the macromodels are synthesized, the circuit simulation with the consideration of EM-effects can be performed by using SPICE. The EM-field distributions can be also easily calculated by taking convolutions of pre-simulated EM impulse responses and the SPICE results.

The differentiated services (DiffServ) architecture is proposed to provide a service differentiation between traffic classes or behavior aggregates in a scalable manner. A key functional element to deploy DiffServ is traffic conditioning, more specifically traffic marker. This paper proposes an adaptive and aggregated traffic marker embodying the functions: (1) inter-connect two-rate three color markers (trTCMs), (2) estimate the aggregate rate of Assured Forwarding (AF) classes, and (3) re-mark the some parts of excessive portion of assigned link-rate per AF class queue with some down-grading probability to lower AF class. Both analysis and simulations are used to evaluate the performance of the proposed aggregate-traffic marker. The analysis of the proposed marker shows its clear service differentiation among behavior aggregates (BAs) under different traffic load conditions. Also a performance evaluation is performed through network simulation with more realistic traffics as unbalanced intensities among different BAs. Shortly, our proposed aggregate-traffic marker enables to keep the priority orders in terms of loss rate and delay/jitter among BAs in spites of varying and unbalanced traffic intensities.

The encryption algorithm Camellia is a 128 bit block cipher proposed by NTT and Mitsubishi, Japan. Since the algebraic degree of the outputs after 3 rounds is greater than 128, designers estimate that it is impossible to attack Camellia by higher order differential. In this paper, we show a new higher order differential attack which controls the value of differential using proper fixed value of plaintext. As the result, we found that 6-round F-function can be attacked using 8th order differentials. The attack requires 217 chosen plaintexts and 222 F-function operations. Our computer simulation took about 2 seconds for the attack. If we take 2-R elimination algorithm, 7-round F-function will be attacked using 8th order differentials. This attack requires 219 chosen plaintexts and 264 F-function operations, which is less than exhaustive search for 128 bit key.

This paper describes truncated and impossible differentials of Feistel block ciphers with round functions of 2-layer SPN (Substitution and Permutation Network) transformation modules such as the 128-bit block cipher Camellia, which was proposed by NTT and Mitsubishi Electric Corporation. Our work improves on the best known truncated and impossible differentials, and has found a nontrivial 9-round truncated differential that may lead to a possible attack against a reduced-round version of Camellia without input/output whitening, FL or FL-1 (Camellia-NFL), in the chosen plain text scenario. Previously, only 6-round differentials were known that may suggest a possible attack of Camellia-NFL reduced to 8-rounds. We also show a nontrivial 7-round impossible differential, whereas only a 5-round impossible differential was previously known. We also consider the truncated differential of a reduced-round version of Camellia (Camellia-DS) whose round functions are composed of D-S (Diffusion and Substitution) transformation modules and without input/output whitening, FL or FL-1 (Camellia-DS-NFL), and show a nontrivial 9-round truncated differential, which may lead to a possible attack in the chosen plain text scenario. This truncated differential is effective for general Feistel structures with round functions composed of S-D (Substitution and Diffusion) or D-S transformation.

This paper describes the behavior of voids that were formed due to electromigration and diffusion in the interconnections of gold during a DC bias tests of GaAs ICs to current densities in the interconnections of 0.67 106 A/cm2 to 1.27 106 A/cm2 in the high temperature range of 230 to 260. We have found that the voids were formed at the centers in the cross sections of the interconnections and that gold is left around the voids, which means current still flows after the void formation. We have carefully observed the movement of the anode and cathode side edge of the voids during the tests and found that edges moved toward the cathode, in the direction opposite to the electron flow. This direction is constant. Also, the voids are extended, which means that the velocity of the cathode side edge is greater than that of the anode side edge. The velocity of the edges almost proportionally increased with the current density. The constant edge movement direction and the velocity of the edge dependence on the current density suggest that one of the causes of the edge movement is electromigration. The velocity of the edge depends on the distance between the anode side edge of the void and the through hole. The velocity increases in accordance with a decrease in the distance. This means that one of the causes of the edge movement is the diffusion of gold atoms by a concentration and pressure gradient. The GaAs IC failed at almost the same time as the voids appeared. It is important for reliability to prevent the formation of voids caused by electromigration and diffusion.

We propose a novel three-dimensional (3-D) display using only two 2-D images displayed at different depths. It is based on a new perceptual phenomenon induced by the human binocular visual system and enables an observer using no extra equipment to perceive an apparent 3-D image of continuous depth when the luminance is divided between the 2-D images according to the 3-D image depth. Our prototype direct-vision 3-D display using this mechanism can easily produce moving 3-D color images by using conventional 2-D color displays.

This paper deals with a mathematical formulation of the scattering from a periodic surface with finite extent. In a previous paper the scattered wave was shown to be represented by an extended Floquet form by use of the periodic nature of the surface. This paper gives a new interpretation of the extended Floquet form, which is understood as a sum of diffraction beams with diffraction orders. Then, the power flow of each diffraction beam and the relative power of diffraction are introduced. Next, on the basis of a physical assumption such that the wave scattering takes place only from the corrugated part of the surface, the amplitude functions are represented by the sampling theorem with unknown sample sequence. From the Dirichlet boundary condition, an equation for the sample sequence is derived and solved numerically to calculate the scattering cross section and optical theorem. Discussions are given on a hypothesis such that the relative power of diffracted beam becomes almost independent of the width of surface corrugation.

The Belousov-Zhabotinsky (BZ) reaction provides us important clues in controlling 2D phase-lagged stable synchronous patterns in an excitable medium. Because of the difficulty in computing reaction-diffusion systems in large systems using conventional digital processors, we here propose a cellular-automaton (CA) circuit that emulates the BZ reaction. In the circuit, a two-dimensional array of parallel processing cells is responsible for fast emulation, and its operation rate is independent of the system size. The operations of the proposed CA circuit were demonstrated by using a simulation program with integrated circuit emphasis (SPICE).

Quality of service (QoS) technology has been implemented and started to be applied to new applications on the next-generation Internet. However, as new applications have many kinds of features and requirements, some additional features should be added to current QoS control technology. For example, they require a definition of a single policy to operate QoS control in the management domain consistently and efficiently. Policy definition for transport layer in a domain and among domains is being discussed at IETF to set a standard process, however detailed policy corresponding to the application or contents information according to the application semantics has not been discussed. Therefore we developed QoS policy control mechanism using metadata which is defined as a structured data according to the application semantics. Though metadata and transport mechanism can be located into quite different positions in the concept of network layers, we made them successfully collaborated by defining meta policy. In this paper, we describe our approach to define a meta policy based on the requirements and information contents from the application as a high level layer concept to be able to classify the network behavior. Our approach enables to multiple QoS control and collaboration among domains. We also report of the activities in IETF and ITU-T.

Differentiated Service (DiffServ) is a technology designed to provide Quality of Service (QoS) in the Internet, and is superior to Integrated Service (IntServ) technology with respect to the simplicity of its architecture and the scalability of networks. Although various simulation studies and estimations over testbeds have investigated the QoS that is offered via the DiffServ framework, almost all of them focused on the characteristics in a single DiffServ domain. However, the Internet is actually composed of a large number of AS domains, and thus packets are very likely to arrive at their destinations after going through many different domains. Therefore, we have analyzed the QoS performance in a model consisting of multiple DiffServ domains, and focused especially on the quality provided by Assured Forwarding Service (AF) to achieve statistical bandwidth allocation with AF-PHB. Our simulation results show some throughput characteristics of flows over multiple Diffserv domains, which clarify how network configurations impact the QoS over multiple DiffServ domains.

We propose a buffer management mechanism, called V-WFQ (Virtual Weighted Fair Queueing), for achieving an approximately fair allocation of bandwidth with a small amount of hardware in a high-speed network. The basic process for the allocation of bandwidth uses selective packet dropping that compares the measured input rate of the flow with an estimated fair share of bandwidth. Although V-WFQ is a hardware-efficient FIFO-based algorithm, it achieves almost ideal fairness in bandwidth allocation. V-WFQ can be implemented in the high-speed core routers of today's IP backbone networks to provide various high-quality services. We have investigated V-WFQ's performance in terms of fairness and link utilization through extensive simulation. The results of simulation show that V-WFQ achieves a good balance between fairness and link utilization under various simulation conditions.