In a phase-locked-loop (PLL) frequency synthesizer with binary phase comparison, jitter is hard to suppress. In this paper, we propose a PLL frequency synthesizer with an improved binary phase comparison which can solve the above problem. The effectiveness of the proposed method is confirmed by PSpice simulation results.

Low voltage (LV) analog circuit design techniques are addressed in this tutorial. In particular, (i) technology considerations; (ii) transistor model capable to provide performance and power tradeoffs; (iii) low voltage implementation techniques capable to reduce the power supply requirements, such as bulk-driven, floating-gate, and self-cascode MOSFETs; (iv) basic LV building blocks; (v) multi-stage frequency compensation topologies; and (vi) fully-differential and fully-balanced systems.

Measurement of the viscosity of liquid using a piezoelectric disk is described. Experiments with a radial expansion mode of a piezoceramic disk were carried out for water-glycerin mixture samples. Resonant resistance has linearity to the square root of the product of density and viscosity of a liquid around 113 kHz.

In this paper, a type of multi-carrier direct sequence code division multiple access (MC-DS-CDMA) system which uses frequency spread coding is proposed and investigated for the down-link. An MC-DS-CDMA system is a combined system of CDMA and multi-carrier modulation. This system is often categorized as a "serial to parallel (S/P) type" system because serial to parallel converted data symbols are transmitted. They use different sub-carriers which are narrow-band DS waveforms. In this system, benefits of path or frequency diversity can not be obtained because of the narrow-band transmission of each data symbol. In order to benefit from the diversity, we propose to adopt frequency spread coding in an MC-DS-CDMA system. The proposed system exploits frequency diversity without additional redundancy, i. e. , no frequency or time redundancy is required to improve the performance. Computer simulation is carried out in a frequency selective fading channel and the results show its effectiveness in terms of average bit error rate (BER). Furthermore, the proposed system is compared with a multi-carrier (MC-) CDMA system which is often categorized as a "copy type" system and a single-carrier (SC-) DS-CDMA system using a RAKE receiver.

To improve frequency efficiency or user capacity in multi-path fading environments, we introduce and investigate an orthogonal multi-carrier frequency hopping-code division multiple access (FH-CDMA). These improvements are achieved by combining the orthogonal frequency division multiplexing (OFDM) and FH-CDMA schemes. The basic idea has been previously proposed by the authors. The aim of study in this paper is to evaluate the performance of this scheme in various environments. The theoretical analysis of bit error rate (BER) performance in this paper includes the effects of frequency selective fading in land mobile communications and of nonlinear amplification in satellite communications. A modified scheme of controlling transmission power to be controlled according to the number of simultaneously accessing users is also discussed. This modified scheme improves BER performance for frequency selective fading when the number of simultaneously accessing users in a cellular zone is small. Furthermore, an error-correcting code and its erasure decoding are applied in order to reduce errors due to hits in asynchronous FH/CDMA for reverse link as well as errors due to fading and noise.

This paper proposes a new maximal ratio combining (MRC) frequency diversity automatic-repeat-request (ARQ) scheme suitable for high-speed orthogonal frequency division multiplexing (OFDM) systems that is based on the conventional packet combining ARQ scheme. The proposed scheme regularly changes the previously prepared subcarrier assignment pattern at each retransmission according to the number of retransmissions. This scheme sharply reduces the number of ARQ retransmissions and much improves the throughput performance in slow fading environments by virtue of the frequency diversity effect while it requires no complex adaptive operations. Computer simulation results show that the proposed scheme reduces the required number of retransmissions to about 3 at the accumulative correct packet reception rate (ACPRR) of 0.9.

The transmission quality in mobile wireless communications is affected by not only the thermal noise but also the multipass fading which changes drastically an amplitude and a phase of received signal. The paper proposes the theoretical and approximate methods for deriving an average bit error rate in DS-CDMA systems under the Rician fading environment on the assumption of the frequency non-selective fading, as parameters of the number of simultaneous access stations, the maximum Doppler frequency and so on. It is confirmed from the coincidence of theoretical and approximate results with simulation ones that the proposed approach is applicable to a variety of system parameters.

In this paper, a method of Transmission Power Control (TPC) for Orthogonal Frequency Division Multiplexing Direct Sequence Code Division Multiple Access (OFDM-DS-CDMA), in order to compensate for power attenuation at each subcarrier, is proposed. Instead of assigning same power levels for all-subcarriers, different transmission power levels are assigned to different subcarriers, according to the attenuation of the subcarriers. System performance, in terms of Bit Error Rate (BER), has been evaluated by Monte Carlo simulation. The simulation results presented significant improvement, the proposed system performed much better than the system without TPC. It is shown that the Each Carrier TPC performs better than All Carriers TPC, which all carriers are controlled uniformly, hence Each Carrier TPC is more suitable for OFDM-DS-CDMA system.

This paper proposes an ASIP performance optimization method taking clock frequency into account. The performance of an instruction set processor can be measured using the execution time of an application program, which can be determined by the clock cycles to perform the application program divided by the applied clock frequency. Therefore, the clock frequency should also be tuned in order to maximize the performance of the processor under the given design constraints. Experimental results show that the proposed method determines an optimal combination of FUs considering clock frequency.

A selectively grown Si1-xGex base heterojunction bipolar transistor (HBT) was fabricated, and effects of Ge and B profiles on the device performance were investigated. Since no obvious leakage current was observed, it is shown that good crystallinity of Si1-xGex was achieved by using a UHV/CVD system with high-pressure H2 pre-cleaning of the substrate. Very high current gain of 29,000 was obtained in an HBT with a uniform Ge profile by both increasing electron injection from the emitter to the base and reducing band gap energy in the base. Since the Early voltage is affected by the grading of Ge content in the base, the HBT with the graded Ge profile provides very high Early voltage. However, the breakdown voltage is degraded by increasing Ge content because of reducing bandgap energy and changing dopant profile. To increase the cutoff frequency, dopant diffusion must be suppressed, and carrier acceleration by the internal drift field with the graded Ge profile has an additional effect. By doing them, an extremely high cutoff frequency of 130 GHz was obtained in HBT with graded Ge profiles.

In this study, wave propagation phenomena of phase states are observed at van der Pol oscillators coupled by inductors as a ladder. For the case of 17 oscillators, interesting wave propagation phenomena of phase states are found. By using the relationship between phase states and oscillation frequencies, the mechanisms of the propagation and the reflection of wave are explained. Circuit experimental results agree well with computer calculated results qualitatively.

In this paper, fast algorithms for the CMA (constant modulus algorithm), which is one of the widely used algorithms for blind equalizationi are presented. We propose the FBCMA (frequency domain block CMA) which takes advantage of fast linear convolution in the DFT domain by using the overlap save method. For the FBCMA, a nonlinear error function in the frequency domain is derived using Parseval's relation. Also, an adaptive algorithm in the DFT domain is introduced to adjust the frequency domain filter coefficients. For a block size and filter length of N, the multiplications required for the conventional CMA and proposed FBCMA are on the order of O(N2) and O(N log N), respectively.

In this paper, the use of optimal Karhunen-Loeve (KL) transform for quantization of speech line spectrum frequency (LSF) coefficients is studied. Both scalar quantizer (SQ) and vector quantizer (VQ) schemes are developed to encode efficiently the transform parameters after operating one or two-dimensional KL transform. Furthermore, the SQ schemes are also combined with entropy coding by using Huffman variable length coding (VLC). The basic idea in developing these schemes is utilizing the strong correlation of LSF parameters to reduce the bit rate for a given level of fidelity. Since the use of global statistics for generating the coding scheme may not be appropriate, we propose several adaptive KL transform systems (AKL) to encode the LSF parameters. The performance of all systems for different bit rates is investigated and adequate comparisons are made. It is shown that the proposed KL transform coding systems introduce as good as or better performance for both SQ and VQ in the examined bit rates compared to other methods in the field of LSF coding.

In digital modulation for mobile radio telephone services frequency modulation with continuous phase with small modulation indices (MSK/GMSK) is sometimes used. Extension of the synchronization subsystems' pulling band in a coherent receiver and reducing synchronization delay is important for the mobile communication. At this moment there are only two possible synchronization schemes for the coherent MSK/GMSK receiver: Costas and de Buda's. This paper presents a new method (a possible alternative to both of them) where the frequency discriminator with decoupled carrier and bit synchronizing subsystem are combined to handle the task. For comparison, this paper also describes performances of the Costas carrier recovery scheme, which is widely employed for MSK/GMSK coherent demodulation. Discrimination and fluctuation characteristics for frequency, phase, and symbol delay synchronization subsystems are shown and the BER degradation from the conventional Costas scheme is calculated. This paper demonstrates with simulation results that the proposed scheme improves RF carrier acquisition performances, and at the same time, for large signal-to-noise ratios (SNR's) provides similar or better tracking performances than the Costas one. While limited to higher SNR ratios, the proposed synchronization scheme is suitable for many applications and can be implemented with simpler circuitry, well suited to integrated circuit implementation.

In some applications, such as the echo cancellation problem of satellite-linked communication channels, there occurs a problem of estimation of a long impulse response, which consists of a long flat delay and a short dispersive response region. In this paper, it is shown that the use of the adaptive algorithm based on the frequency domain sampling theorem enables efficient identification of the long impulse response. The use of the proposed technique can lead to the reduction of both the number of adaptive weights and the complexity of flat delay estimation.

WDM transmission experiments over cascaded sections of optical links including wavelength converting 2R-transponders have been carried out in a loop testbed. Using dispersion compensated links and simple direct modulated transponder lasers, up to 11 cascaded crossconnects and 1750 km trunk lines have been bridged with 2.5 Gbit/s NRZ signals. The limitations are given mainly due to the accumulated jitter as it is shown by numerical simulations. The results indicate, that 2R-transponders are a useful approach to a flexible WDM network design using bitrate-transparent wavelength conversion.

After a short introduction to the different requirements to and techniques for wavelength conversion, focus is on cross-gain and cross-phase modulation in SOA based converters. Aspects like jitter accumulation, regeneration and conversion to the same wavelength is discussed. It is predicted that jitter accumulation can be minimised while also assuring a high extinction ratio by using a 9-10 dB ratio between the signal and CW power. Using this guideline simulations show that 20 cross-gain modulation converters can be cascaded at 10 Gbit/s with only 20 ps of accumulated jitter and an extinction ratio of 10 dB. The regenerative capabilities of the cross-phase converters are described and verified experimentally at 20 Gbit/s. By controlling the input power to an EDFA, the noise redistribution and improvement of the signal-to-noise ratio is demonstrated. In a similar experiment at 2.5 Gbit/s, the regeneration causes a reduction of the required input power to an in-line EDFA of 6 dB for a power penalty of 1 dB at a bit error rate of 10-9. If two converters are concatenated the power requirement is reduced 8 dB. Obviously, the power reduction allows for longer spans between in-line EDFAs. A simple scheme for regeneration without wavelength conversion is assessed at 2.5 Gbit/s resulting in 4.5 dB lower required EDFA input power. The scheme is characterised by a quasi-digital transfer function that is ideal for regeneration. A combination of cross-gain and cross-phase conversion is used to perform conversion to the same wavelength at 20 Gbit/s. The insertion penalty for this dual-stage converter is below 2 dB and is mainly caused by extinction ratio degradation from the cross-gain converter. Finally, a new device for all-optical wavelength conversion has been proposed and 2.5 Gbit/s operation has been simulated with good results.

This paper proposes adaptive line enhancers with new coefficient update algorithms on the basis of least-square-error criteria. Adaptive algorithms by least-squares are known to converge faster than stochastic-gradient ones. However they have high computational complexity due to matrix inversion. To avoid matrix inversion the proposed algorithms adapt only one coefficient to detect one sinusoid. Both FIR and IIR types of adaptive algorithm are presented, and the techniques to reduce the influence of additive noise is described in this paper. The proposed adaptive line enhancers have simple structures and show excellent convergence characteristics. While the convergence of gradient-based algorithms largely depend on their stepsize parameters, the proposed ones are free from them.

WDM transmission experiments over cascaded sections of optical links including wavelength converting 2R-transponders have been carried out in a loop testbed. Using dispersion compensated links and simple direct modulated transponder lasers, up to 11 cascaded crossconnects and 1750 km trunk lines have been bridged with 2.5 Gbit/s NRZ signals. The limitations are given mainly due to the accumulated jitter as it is shown by numerical simulations. The results indicate, that 2R-transponders are a useful approach to a flexible WDM network design using bitrate-transparent wavelength conversion.

After a short introduction to the different requirements to and techniques for wavelength conversion, focus is on cross-gain and cross-phase modulation in SOA based converters. Aspects like jitter accumulation, regeneration and conversion to the same wavelength is discussed. It is predicted that jitter accumulation can be minimised while also assuring a high extinction ratio by using a 9-10 dB ratio between the signal and CW power. Using this guideline simulations show that 20 cross-gain modulation converters can be cascaded at 10 Gbit/s with only 20 ps of accumulated jitter and an extinction ratio of 10 dB. The regenerative capabilities of the cross-phase converters are described and verified experimentally at 20 Gbit/s. By controlling the input power to an EDFA, the noise redistribution and improvement of the signal-to-noise ratio is demonstrated. In a similar experiment at 2.5 Gbit/s, the regeneration causes a reduction of the required input power to an in-line EDFA of 6 dB for a power penalty of 1 dB at a bit error rate of 10-9. If two converters are concatenated the power requirement is reduced 8 dB. Obviously, the power reduction allows for longer spans between in-line EDFAs. A simple scheme for regeneration without wavelength conversion is assessed at 2.5 Gbit/s resulting in 4.5 dB lower required EDFA input power. The scheme is characterised by a quasi-digital transfer function that is ideal for regeneration. A combination of cross-gain and cross-phase conversion is used to perform conversion to the same wavelength at 20 Gbit/s. The insertion penalty for this dual-stage converter is below 2 dB and is mainly caused by extinction ratio degradation from the cross-gain converter. Finally, a new device for all-optical wavelength conversion has been proposed and 2.5 Gbit/s operation has been simulated with good results.