This letter deals with joint carrier frequency offset (CFO) and direction of arrival (DOA) estimation based on the minimum variance distortionless response (MVDR) criterion for interleaved orthogonal frequency division multiple access (OFDMA)/space division multiple access (SDMA) uplink systems. In order to reduce the computational load of two-dimensional searching based methods, the proposed method includes only once polynomial CFO rooting and does not require DOA paring, hence it raises the searching efficiency. Several simulation results are provided to illustrate the effectiveness of the proposed method.

Orthogonal frequency division multiplexing (OFDM) is very sensitive to the carrier frequency offset (CFO). The CFO estimation precision heavily makes impacts on the OFDM performance. In this paper, a new Bayesian learning-assisted joint CFO tracking and channel impulse response estimation is proposed. The proposed algorithm is modified from a Bayesian learning-assisted estimation (BLAE) algorithm in the literature. The BLAE is expectation-maximization (EM)-based and displays the estimator mean square error (MSE) lower than the Cramer-Rao bound (CRB) when the CFO value is near zero. However, its MSE value may increase quickly as the CFO value goes away from zero. Hence, the CFO estimator of the BLAE is replaced to solve the problem. Originally, the design criterion of the single-time-sample (STS) CFO estimator in the literature is maximum likelihood (ML)-based. Its MSE performance can reach the CRB. Also, its CFO estimation range can reach the widest range required for a CFO tracking estimator. For a CFO normalized by the sub-carrier spacing, the widest tracking range required is from -0.5 to +0.5. Here, we apply the STS CFO estimator design method to the EM-based Bayesian learning framework. The resultant Bayesian learning-assisted STS algorithm displays the MSE performance lower than the CRB, and its CFO estimation range is between ±0.5. With such a Bayesian learning design criterion, the additional channel noise power and power delay profile must be estimated, as compared with the ML-based design criterion. With the additional channel statistical information, the derived algorithm presents the MSE performance better than the CRB. Two frequency-selective channels are adopted for computer simulations. One has fixed tap weights, and the other is Rayleigh fading. Comparisons with the most related algorithms are also been provided.

In this study, a blind carrier frequency offset (CFO) estimation method is proposed using the time-frequency symmetry of the transmitted signals of a weighted Fourier transform (WFrFT) communication system. Blind CFO estimation is achieved by focusing on the property that results in matching the signal waveforms before and after the Fourier transform when the WFrFT parameter is set to a certain value. Numerical simulations confirm that the proposed method is more resistant to Rayleigh fading than the conventional estimation methods.

High-speed flash ADCs are useful in high-speed applications such as communication receivers. Due to offset voltage variation in the sub-micron processes, the power consumption and the area increase significantly to suppress variation. As an alternative to suppressing the variation, we have developed a flash ADC architecture that selects the comparators based on offset voltage ranking for reference generation. Specifically, with the order statistics as a basis, our method selects the minimum number of comparators to obtain equally spaced reference values. Because the proposed ADC utilizes offset voltages as references, no resistor ladder is required. We also developed a time-domain sorting mechanism for the offset voltages to achieve on-chip comparator selection. We first perform a detailed analysis of the order statistics based selection method and then design a 4-bit ADC in a commercial 65-nm process and perform transistor-level simulation. When using 127 comparators, INLs of 20 virtual chips are in the range of -0.34LSB/+0.29LSB to -0.83LSB/+0.74LSB, and DNLs are in the range of -0.33LSB/+0.24LSB to -0.77LSB/+1.18LSB at 1-GS/s operation. Our ADC achieves the SNDR of 20.9dB at Nyquist-frequency input and the power consumption of 0.84mW.

This paper presents a deep neural network (DNN) based symbol detection and modulation classification detector (SDMCD) for mixed blind signals detection. Unlike conventional methods that employ symbol detection after modulation classification, the proposed SDMCD can perform symbol recovery and modulation identification simultaneously. A cumulant and moment feature vector is presented in conjunction with a low complexity sparse autoencoder architecture to complete mixed signals detection. Numerical results show that SDMCD scheme has remarkable symbol error rate performance and modulation classification accuracy for various modulation formats in AWGN and Rayleigh fading channels. Furthermore, the proposed detector has robust performance under the impact of frequency and phase offsets.

This paper describes a method to evaluate the modulated waveforms output by a high-speed external phase modulator over a wide wavelength range by using linear optical sampling (LOS) and a wavelength-swept light source. The phase-modulated waveform is sampled by LOS together with the reference signal before modulation, and the modulation waveform is observed by removing the phase noise of the light source extracted from the reference signal. In this process, the frequency offset caused by the optical-path length difference between the measurement and reference interferometers is removed by digital signal processing. A pseudo-random binary-sequence modulated signal is observed with a temporal resolution of 10ps. We obtained a dynamic range of ∼40dB for the measurement bandwidth of 10 nm. When the measurement bandwidth is expanded to entire C-Band (∼35nm), the dynamic ranges of 37∼46dB were observed, depending on the wavelengths. The measurement time was sub-seconds throughout the experiment.

This paper presents a physical layer wireless device identification method that uses a convolutional neural network (CNN) operating on a quadrant IQ transition image. This work introduces classification and detection tasks in one process. The proposed method can identify IoT wireless devices by exploiting their RF fingerprints, a technology to identify wireless devices by using unique variations in analog signals. We propose a quadrant IQ image technique to reduce the size of CNN while maintaining accuracy. The CNN utilizes the IQ transition image, which image processing cut out into four-part. An over-the-air experiment is performed on six Zigbee wireless devices to confirm the proposed identification method's validity. The measurement results demonstrate that the proposed method can achieve 99% accuracy with the light-weight CNN model with 36,500 weight parameters in serial use and 146,000 in parallel use. Furthermore, the proposed threshold algorithm can verify the authenticity using one classifier and achieved 80% accuracy for further secured wireless communication. This work also introduces the identification of expanded signals with SNR between 10 to 30dB. As a result, at SNR values above 20dB, the proposals achieve classification and detection accuracies of 87% and 80%, respectively.

This paper proposes a physical-layer cell identity (PCID) detection method that uses joint estimation of the frequency offset and secondary synchronization signal (SSS) sequence for the 5G new radio (NR) initial access with beamforming transmission at a base station. Computer simulation results show that using the PCID detection method with the proposed joint estimation yields an almost identical PCID detection probability as the primary synchronization signal (PSS) detection probability at an average received signal-to-noise ratio (SNR) of higher than approximately -5dB suggesting that the residual frequency offset is compensated to a sufficiently low level for the SSS sequence estimation. It is also shown that the PCID detection method achieves a high PCID detection probability of greater than 90% and 50% at the carrier frequency of 30 and 50GHz, respectively, at the average received SNR of 0dB for the frequency stability of a user equipment oscillator of 3ppm.

In this paper, we address the problem of detector design in severely frequency-selective channels for spatial multiplexing systems that adopt filter bank multicarrier based on offset quadrature amplitude modulation (FBMC/OQAM) as the communication waveforms. We consider decision feedback equalizers (DFEs) that use multiple feedback filters to jointly cancel the post-cursor components of inter-symbol interference, inter-antenna interference, and, in some configuration, inter-subchannel interference. By exploiting the special structures of the correlation matrix and the staggered property of the FBMC/OQAM signals, we obtain an efficient method of computing the DFE coefficients that requires a smaller number of multiplications than the linear equalizer (LE) and conventional DFE do. The simulation results show that the proposed detectors considerably outperform the LE and conventional DFE at moderate-to-high signal-to-noise ratios.

This paper presents the physical-layer cell identity (PCID) detection probability using the narrowband primary synchronization signal (NPSS) and narrowband secondary synchronization signal (NSSS) based on the narrowband Internet-of-Things (NB-IoT) radio interface considering frequency offset and the maximum Doppler frequency in the 28-GHz band. Simulation results show that the autocorrelation based NPSS detection method is more effective than the cross-correlation based NPSS detection using frequency offset estimation and compensation before the NPSS received timing detection from the viewpoints of PCID detection probability and computational complexity. We also show that when using autocorrelation based NPSS detection, the loss in the PCID detection probability at the carrier frequency of fc =28GHz compared to that for fc =3.5GHz is only approximately 5% at the average received signal-to-noise ratio (SNR) of 0dB when the frequency stability of a local oscillator of a user equipment (UE) set is 20ppm. Therefore, we conclude that the multiplexing schemes and sequences of NPSS and NSSS based on the NB-IoT radio interface associated with autocorrelation based NPSS detection will support the 28-GHz frequency spectra.

In order to improve tracking, interference and multipath mitigation performance from that possible with existing signals, a new Global Navigation Satellite System (GNSS) signal is needed that can offer additional degrees of freedom for shaping its pulse waveform and spectrum. In this paper, a new modulation scheme called Quinary Offset Carrier modulation (QOC) is proposed as a new GNSS signal design. The pulse waveforms of QOC modulation are divided into two types: convex and concave waveforms. QOC modulations can be easily constructed by selecting different modulation parameters. The spectra and autocorrelation characteristics of QOC modulations are investigated and discussed. Simulations and analyses show that QOC modulation can achieve similar performance to traditional BOC modulation in terms of code tracking, anti-multipath, and compatibility. QOC modulation can provide a new option for satellite navigation signal design.

This paper presents the physical-layer cell identity (PCID) detection probability using the primary synchronization signal (PSS) and secondary synchronization signal (SSS) for the New Radio (NR) radio interface considering a large frequency offset and high Doppler frequency in multipath Rayleigh fading channels in the 28-GHz band. Simulation results show that cross-correlation based PSS detection after compensating for the frequency offset achieves higher PCID detection probability than autocorrelation based PSS detection at the average received signal-to-noise power ratio (SNR) values below approximately 0dB for the frequency stability of a user equipment (UE) oscillator of ϵ =5ppm. Meanwhile, both methods achieve almost the same PCID detection probability for average received SNR values higher than approximately 0dB. We also show that even with the large frequency offset caused by ϵ =20 ppm, the high PCID detection probability of approximately 90 (97)% and 90 (96)% is achieved for the cross-correlation or autocorrelation based PSS detection method, respectively, at the average received SNR of 0dB for the subcarrier spacing of 120 (240)kHz. We conclude that utilizing the multiplexing scheme for the PSS and SSS and their sequences is effective in achieving a high PCID detection probability considering a large frequency offset even with the frequency deviation of ϵ =20ppm in the 28-GHz band.

Universal filtered multicarrier (UFMC) systems offer a flexibility of filtering sub-bands with arbitrary bandwidth to suppress out-of-band (OoB) emission, while keeping the orthogonality between subcarriers in one sub-band. Oscillator discrepancies between the transmitter and receiver induce carrier frequency offset (CFO) in practical systems. In this paper, we propose a novel CFO estimation method for UFMC systems that has very low computational complexity and can then be used in practical systems. In order to fully exploit the coherence bandwidth of the channel, the training symbols are designed to have several identical segments in the frequency domain. As a result, the integral part of CFO can be estimated by simply determining the correlation between received signal and the training symbol. Simulation results show that the proposed method can achieve almost the same performance as an existing method and even a better performance in channels that have small decay parameter values. The proposed method can also be used in other multicarrier systems, such as orthogonal frequency division multiplexing (OFDM).

In this letter, the performance of a state-of-the-art deep learning (DL) algorithm in [5] is analyzed and evaluated for orthogonal frequency-division multiplexing (OFDM) receivers, in the presence of harmonic spur interference. Moreover, a novel spur cancellation receiver structure and algorithm are proposed to enhance the traditional OFDM receivers, and serve as a performance benchmark for the DL algorithm. It is found that the DL algorithm outperforms the traditional algorithm and is much more robust to spur carrier frequency offset.

Visible light communication (VLC) will play a wide variety of important roles in future communication services. This paper deals with color shift keying (CSK) for the modulation of visible light communications. There are some previous studies about psychological and physiological effects of colors. These studies implied that color offset CSKs have psychological and physiological effects, which normal CSK doesn't have. This paper evaluates the psychological and physiological effects of color offset CSKs compared with normal CSK based on interviews and electroencephalogram (alpha wave, beta wave, and P300) measurements. This study evaluates the feasibility of visible light communication providing added value by measuring arousal, rest, visual attraction, task performance, capacity of working memory, and response for the CSK codes. The results showed that red-, green- and blue-offset CSK have specific features. Red-offset CSK induces excitement and increasing wakefulness levels, attracts attention, enlarges capacity of working memory, raises task performance, and induces fast responses. Green-offset CSK maintains rest levels, elevates relaxation levels, reduces stress, raises task performance, and induces fast responses. Blue-offset CSK maintains rest levels and induces fast responses. It is thought that we can use color offset CSK appropriately and provide added value to their application by considering the results of psychological and physiological investigations. Red-offset CSK is thought to be suitable for commercial advertisements. Green- and blue-offset CSK are thought to be suitable for wireless communication environments in hospitals. Red- and green-offset CSK are thought to be suitable for wireless communication environments in business. Red-, green- and blue-offset CSK are thought to be suitable for use in intelligent transportation systems (ITS).

We propose a novel bit error rate (BER) analysis model of weighted-type fractional Fourier transform (WFRFT)-based systems with WFRFT order offset Δα. By using the traditional BPSK BER analysis method, we deduce the equivalent signal noise ratio (SNR), model the interference in the channel as a Gaussian noise with non-zero mean, and provide a theoretical BER expression of the proposed system. Simulation results show that its theoretical BER performance well matches the empirical performance, which demonstrates that the theoretical BER analysis proposed in this paper is reliable.

A simple and novel multiple-symbol differential detection (MSDD) scheme is proposed for IEEE 802.15.4 binary phase shift keying (BPSK) receivers. The detection is initiated by estimating and compensating the carrier frequency offset (CFO) effect in the chip sample of interest. With these new statistics, the decisions are jointly made by allowing the observation window length to be longer than two bit intervals. Simulation results demonstrate that detection reliability of the IEEE 802.15.4 BPSK receivers is significantly improved. Namely, at packet error rate (PER) of 1×10-3, the signal-to-noise ratio (SNR) gap between ideal coherent detection (perfect carrier reference phase and no CFO) with differential decoding and conventional optimal single differential coherent detection (SDCD) is filled by 2.1dB when the observation window length is set to 6bit intervals. Then, the benefit that less energy consumed by retransmissions is successfully achieved.

This paper presents a self-calibrating dynamic latched comparator with a stochastic offset voltage detector that can be realized by using simple digital circuitry. An offset voltage of the comparator is compensated by using a statistical calibration scheme, and the offset voltage detector uses the uncertainty in the comparator output. Thanks to the simple offset detection technique, all the calibration circuitry can be synthesized using only standard logic cells. This paper also gives a design methodology that can provide the optimal design parameters for the detector on the basis of fundamental statistics, and the correctness of the design methodology was statistically validated through measurement. The proposed self-calibrating comparator system was fabricated in a 180 nm 1P6M CMOS process. The prototype achieved a 38 times improvement in the three-sigma of the offset voltage from 6.01 mV to 158 µV.

In this letter, a novel on-orbit estimation and calibration method of GPS antenna geometry offsets for attitude determination of LEO satellites is proposed. Both baseline vectors in the NED coordinate system are achieved epoch-by-epoch firstly. Then multiple epochs' baseline vectors are united to compute all the offsets via an UKF for a certain long time. After on-orbit estimation and calibration, instantaneous and accurate attitude can be achieved. Numerical results show that the proposed method can obtain the offsets of each baseline in all directions with high accuracy estimation and small STDs, and effective attitudes can be achieved after antenna geometry calibration using the estimated offsets. The high accuracy give the proposed scheme a strong practical-oriented ability.

We propose a wideband antenna that has both vertical and horizontal polarization to create access points with enhanced connectivity. The antenna is composed of a rectangular plate and a ground plate, and the rectangular plate is fed sideways from the ground plate. Its -10dB fractional bandwidth is approximately 162%. It is shown that the offset feed of the rectangular plate is important to attain wideband impedance matching and vertical polarized wave. The results of a parametric study to characterize the first- and second-lowest resonant frequencies are presented. Moreover, the behavior of the impedance matching and polarization is interpreted by dividing the current distribution around the feed port on the rectangular plate into the same direction current mode and the opposite direction current mode. The measured results for the return loss and the radiation pattern of a prototype antenna agree well with the simulation results, therefore the wideband property was experimentally confirmed.