To cope with ever growing mobile data traffic, we recently proposed a concept of cellular ultra-dense radio access network (RAN). In the cellular ultra-dense RAN, a number of distributed antennas are deployed in the base station (BS) coverage area (cell) and user-clusters are formed to perform small-scale distributed multiuser multi-input multi-output (MU-MIMO) transmission and reception in each user-cluster in parallel using the same frequency resource. We also proposed a decentralized interference coordination (IC) framework to effectively mitigate both intra-cell and inter-cell interferences caused in the cellular ultra-dense RAN. The inter-cell IC adopted in this framework is the fractional frequency reuse (FFR), realized by applying the channel segregation (CS) algorithm, and is called CS-FFR in this paper. CS-FFR divides the available bandwidth into several sub-bands and allocates multiple sub-bands to different cells. In this paper, focusing on the optimization of the CS-FFR, we find by computer simulation the optimum bandwidth division number and the sub-band allocation ratio to maximize the link capacity. We also discuss the convergence speed of CS-FFR in a cellular ultra-dense RAN.

Fractional Frequency Reuse (FFR), which was introduced by 3GPP is considered the powerful technique to improve user performance. However, implementation of FFR is a challenge due to strong dependence between base stations (BSs) in terms of resource allocations. This paper studies a modified and flexible FFR scheme that allows all BSs works independently. The analytical and simulation results prove that the modified FFR scheme outperforms the conventional FFR.

Broadcast services for wireless local area networks (WLANs) are being standardized in the IEEE 802.11 task group bc. Envisaging the upcoming coexistence of broadcast access points (APs) with densely-deployed legacy APs, this paper addresses a learning-based spatial reuse with only partial receiver-awareness. This partial awareness means that the broadcast APs can leverage few acknowledgment frames (ACKs) from recipient stations (STAs). This is in view of the specific concerns of broadcast communications. In broadcast communications for a very large number of STAs, ACK implosions occur unless some STAs are stopped from responding with ACKs. Given this, the main contribution of this paper is to demonstrate the feasibility to improve the robustness of learning-based spatial reuse to hidden interferers only with the partial receiver-awareness while discarding any re-training of broadcast APs. The core idea is to leverage robust adversarial reinforcement learning (RARL), where before a hidden interferer is installed, a broadcast AP learns a rate adaptation policy in a competition with a proxy interferer that provides jamming signals intelligently. Therein, the recipient STAs experience interference and the partial STAs provide a feedback overestimating the effect of interference, allowing the broadcast AP to select a data rate to avoid frame losses in a broad range of recipient STAs. Simulations demonstrate the suppression of the throughput degradation under a sudden installation of a hidden interferer, indicating the feasibility of acquiring robustness to the hidden interferer.

The shared last level cache (SLLC) in tile chip multiprocessors (TCMP) provides a low off-chip miss rate, but it causes a long on-chip access latency. In the two-level cache hierarchy, data replication stores replicas of L1 victims in the local LLC (L2 cache) to obtain a short local LLC access latency on the next accesses. Many data replication mechanisms have been proposed, but they do not consider both L1 victim reuse behaviors and LLC replica reception capability. They either produce many useless replicas or increase LLC pressure, which limits the improvement of system performance. In this paper, we propose a two-level cache aware adaptive data replication mechanism (TCDR), which controls replication based on both L1 victim reuse behaviors prediction and LLC replica reception capability monitoring. TCDR not only increases the accuracy of L1 replica selection, but also avoids the pressure of replication on LLC. The results show that TCDR improves the system performance with reasonable hardware overhead.

In this paper, we propose a novel centralized control method to handle multi-radio and terminal connections in an 802.11ax wireless LAN (802.11ax) mixed environment. The proposed control method can improve the throughput by applying 802.11ax Spatial Reuse in an environment hosting different terminal standards and mixed terminal communication quality. We evaluate the proposed control method by computer simulations assuming environments with mixed terminal standards, mixed communication quality, and both.

In this paper, a stochasic geometry analysis of the inversely proportional setting (IPS) of carrier sense threshold (CST) and transmission power for densely deployed wireless local area networks (WLANs) is presented. In densely deployed WLANs, CST adjustment is a crucial technology to enhance spatial reuse, but it can starve surrounding transmitters due to an asymmetric carrier sensing relationship. In order for the carrier sensing relationship to be symmetric, the IPS of the CST and transmission power is a promising approach, i.e., each transmitter jointly adjusts its CST and transmission power in order for their product to be equal to those of others. This setting is used for spatial reuse in IEEE 802.11ax. By assuming that the set of potential transmitters follows a Poisson point process, the impact of the IPS on throughput is formulated based on stochastic geometry in two scenarios: an adjustment at a single transmitter and an identical adjustment at all transmitters. The asymptotic expression of the throughput in dense WLANs is derived and an explicit solution of the optimal CST is achieved as a function of the number of neighboring potential transmitters and signal-to-interference power ratio using approximations. This solution was confirmed through numerical results, where the explicit solution achieved throughput penalties of less than 8% relative to the numerically evaluated optimal solution.

In this paper, we examine techniques for improving the throughput of unlicensed radio systems such as wireless LANs (WLANs) to take advantage of multi-radio access to mobile broadband, which will be important in 5G evolution and beyond. In WLANs, throughput is reduced due to mixed standards and the degraded quality of certain frequency channels, and thus control techniques and an architecture that provide efficient control over WLANs are needed to solve the problem. We have proposed a technique to control the terminal connection dynamically by using the multi-radio of the AP. Furthermore, we have proposed a new control architecture called WiSMA for efficient control of WLANs. Experiments show that the proposed method can solve those problems and improve the WLAN throughput.

3D ultrasound imagers require low-noise amplifier (LNA) with much lower power consumption and smaller chip area than conventional 2D imagers because of the huge amount of transducer channels. This paper presents a low-power small-size LNA with a novel current-reuse circuitry for 3D ultrasound imaging systems. The proposed LNA is composed of a differential common source amplifier and a source-follower driver which share the current without using inductors. The LNA was fabricated in a 0.18-μm CMOS process with only 0.0056mm2. The measured results show a gain of 21dB and a bandwidth of 9MHz. The proposed LNA achieves an average noise density of 11.3nV/√Hz, and the 2nd harmonic distortion below -40dBc with 0.1-Vpp input. The supply current is 85μA with a 1.8-V power supply, which is competitive with conventional LNAs by finer CMOS process.

Lately, an increasing number of wireless local area network (WLAN) access points (APs) are deployed to serve an ever increasing number of mobile stations (STAs). Due to the limited frequency spectrum, more and more AP and STA nodes try to access the same channel. Spatial spectrum reuse is promoted by the IEEE 802.11ax task group through dynamic sensitivity control (DSC), which permits cochannel operation when the received signal power at the prospective transmitting node (PTN) is lower than an adjusted carrier sensing threshold (CST). Previously-proposed DSC approaches typically calculate the CST without node grouping by using a margin parameter that remains fixed during operation. Setting the margin has previously been done heuristically. Finding a suitable value has remained an open problem. Therefore, herein, we propose a DSC approach that employs a node grouping method for adaptive calculation of the CST at the PTN with a channel-aware and margin-free formula. Numerical simulations for dense residential WLAN scenario reveal total throughput and Jain's fairness index gains of 8.4% and 7.6%, respectively, vs. no DSC (as in WLANs deployed to present).

This letter proposes a novel dynamic channel assignment (DCA) scheme to improve the downlink system capacity in heterogeneous networks (HetNets) with fractional frequency reuse (FFR). In the proposed DCA scheme, the macro base station (MBS) finds small-cell base stations (SBSs) that give strong interference to macro user equipments (MUEs) and then dynamically assigns subchannels to the SBSs to serve their small-cell user equipments (SUEs) according to the cross-tier interference information to MUEs. Through simulation results, it is shown that the proposed DCA scheme outperforms other schemes in terms of the total system capacity.

This paper proposes a method to extract and visualize a library update history in a project. The method identifies reused library versions by comparing source code in a product with existing versions of the library so that developers can understand when their own copy of a library has been copied, modified, and updated.

The centralized controller of SDN enables a global topology view of the underlying network. It is possible for the SDN controller to achieve globally optimized resource composition and utilization, including optimized end-to-end paths. Currently, resource composition in SDN arena is usually conducted in an imperative manner where composition logics are explicitly specified in high level programming languages. It requires strong programming and OpenFlow backgrounds. This paper proposes declarative path composition, namely Compass, which offers a human-friendly user interface similar to natural language. Borrowing methodologies from Semantic Web, Compass models and stores SDN resources using OWL and RDF, respectively, to foster the virtualized and unified management of the network resources regardless of the concrete controller platform. Besides, path composition is conducted in a declarative manner where the user merely specifies the composition goal in the SPARQL query language instead of explicitly specifying concrete composition details in programming languages. Composed paths are also reused based on similarity matching, to reduce the chance of time-consuming path composition. The experiment results reflect the applicability of Compass in path composition and reuse.

Recently, there has been an increase in use-after-free (UAF) vulnerabilities, which are exploited using a dangling pointer that refers to a freed memory. In particular, large-scale programs such as browsers often include many dangling pointers, and UAF vulnerabilities are frequently exploited by drive-by download attacks. Various methods to prevent UAF attacks have been proposed. However, only a few methods can effectively prevent UAF attacks during runtime with low overhead. In this paper, we propose HeapRevolver, which is a novel UAF attack-prevention method that delays and randomizes the timing of release of freed memory area by using a memory-reuse-prohibited library, which prohibits a freed memory area from being reused for a certain period. The first condition for reuse is that the total size of the freed memory area is beyond the designated size. The threshold for the conditions of reuse of the freed memory area can be randomized by HeapRevolver. Furthermore, we add a second condition for reuse in which the freed memory area is merged with an adjacent freed memory area before release. Furthermore, HeapRevolver can be applied without modifying the target programs. In this paper, we describe the design and implementation of HeapRevolver in Linux and Windows, and report its evaluation results. The results show that HeapRevolver can prevent attacks that exploit existing UAF vulnerabilities. In addition, the overhead is small.

As the most compelling candidate for 5G, millimeter-wave communication has drawn considerable interest, despite the absence of systematic research on its performance. Therefore, this study investigates millimeter-wave cellular networks and their use of existing frequency reuse schemes and scheduling methods. To evaluate the performance of these networks, we configure a system-level simulator that reflects the eNodeB architecture and frame structure designed to overcome the millimeter-wave frequency characteristics of the Giga Korea Project. Simulations conducted using various combinations of frequency reuse schemes and scheduling methods are described. We found that the best performing radio resource management scheme changes according to the number of user equipment accessing the eNodeB. The results of this study will contribute to performance estimations of the capacity and fairness of cellular-based millimeter-wave communication systems before they are deployed.

Packages are re-usable components for faster and effective software maintenance. To promote the re-use in object-oriented systems and maintenance tasks easier, packages should be organized to depict compact design. Therefore, understanding and assessing package organization is primordial for maintenance tasks like Re-usability and Changeability. We believe that additional investigations of prevalent basic design principles such as defined by R.C. Martin are required to explore different aspects of package organization. In this study, we propose package-organization framework based on reachable components that measures re-usability index. Package re-usability index measures common effect of change taking place over dependent elements of a package in an object-oriented design paradigm. A detailed quality assessment on different versions of open source software systems is presented which evaluates capability of the proposed package re-usability index and other traditional package-level metrics to predict fault-proneness in software. The experimental study shows that proposed index captures different aspects of package-design which can be practically integrated with best practices of software development. Furthermore, the results provide insights on organization of feasible software design to counter potential faults appearing due to complex package dependencies.

In this paper, we study the spectral efficiency of the uplink multi-user large-scale distributed antenna systems (DAS) with imperfect channel state information. We propose the system model of multi-user DAS and illustrate the necessity of pilot reuse. Then, we derive the sum-rate of the system under pilot contamination. Furthermore, we investigate the asymptotical performance when the number of antennas goes to infinity. To reduce the pilot contamination, we present two novel pilot assignment algorithms to improve the spectral efficiency. Finally, we evaluate our proposed strategies through extensive simulations which show that compared with random pilot reuse, the min-max algorithm shows impressive performance with low complexity.

The pilot contamination is a serious problem which hinders the capacity increasing in the massive MIMO system. Similar to Fractional Frequency Reuse (FFR) in the OFDMA system, Fractional Pilot Reuse (FPR) is proposed for the massive MIMO system. The FPR can be further classified as the strict FPR and soft FPR. Meanwhile, the detailed FPR schemes with pilot assignment and the mathematical models are provided. With FPR, the capacity and the transmission quality can be improved with metrics such as the higher Signal to Interference and Noise Ratio (SINR) of the pilots, the higher coverage probability, and the higher system capacity.

We propose an inter-cell interference coordination (ICIC) method that employs inter-cell coordinated transmission power control (TPC) based on inter-cell interference power in addition to conventional received signal power-based TPC in the cellular uplink. We assume orthogonal multiple-access as is used in 3GPP LTE. In the proposed method, an ICIC effect similar to that for conventional fractional frequency reuse (FFR) is obtained. This is achieved by coordinating the allowable inter-cell interference power level at the appropriate frequency blocks within the system bandwidth among neighboring cells in a semi-static manner. Different from conventional FFR, since all users within a cell can access all the frequency blocks, the reduction in multiuser diversity gain is abated. Computer simulation results show that the proposed method enhances both the cell-edge and average user throughput simultaneously compared to conventional universal frequency reuse (UFR) and FFR.

Presentation slide composition is an important job for knowledge workers. Instead of starting from scratch, users tend to make new presentation slides by reusing existing ones. A primary challenge in slide reuse is to select desired materials from a collection of existing slides. The state-of-the-art solution utilizes texts and images in slides as well as file names to help users to retrieve the materials they want. However, it only allows users to choose an entire slide as a query but does not support the search for a single element such as a few keywords, a sentence, an image, or a diagram. In this paper, we investigate content-based search for a variety of elements in presentation slides. Users may freely choose a slide element as a query. We propose different query processing methods to deal with various types of queries and improve the search efficiency. A system with a user-friendly interface is designed, based on which experiments are performed to evaluate the effectiveness and the efficiency of the proposed methods.

Single Carrier — Frequency Domain Multiple Access (SC-FDMA) is a multiple access technique employed in LTE uplink transmission. SC-FDMA can improve system throughput by frequency selective scheduling (FSS). In cellular systems using SC-FDMA in the uplink, interference arising from user equipments (UEs) in neighboring cells degrades the system throughput, especially the throughput of cell-edge UEs. In order to overcome this drawback, many papers have considered fractional frequency reuse (FFR) techniques and analyzed their effectiveness. However, these studies have come to different conclusions regarding the effectiveness of FFR because the throughput gain of FFR depends on the frequency reuse design and evaluation conditions. Previous papers have focused on the frequency reuse design. Few papers have examined the conditions where FFR is effective, and only the UE traffic conditions have been evaluated. This paper reveals other conditions where FFR is effective by demonstrating the throughput gain of FFR. In order to analyze the throughput gain of FFR, we focus on the throughput relationship between FFR and FSS. System level simulation results demonstrate that FFR is effective when the following conditions are met: (i) the number of UEs is small and (ii) the multipath delay spread is large or close to 0.