This paper addresses conjugate-gradient (CG) based pilot-assisted channel estimation and equalization in doubly selective channels for orthogonal frequency division multiplexing (OFDM) block transmissions. With the help of the discrete prolate spheroidal sequence, which shows flat mean-square error (MSE) curves for the reconstructed channels in the presence of Doppler frequency mismatch, a basis expansion model for a parsimonious channel representation over multiple OFDM blocks is developed, a system equation for the least square channel estimation under widely used pilot lattices, where the pilot symbols are irregularly placed in the subcarrier domain, is formulated by introducing carving matrices, and the standard CG method is applied to the system. Relying on the CG method again, the linear minimum mean-square error channel equalization is pursued without performing any matrix inversion, while elevating the convergence speed of the iterative algorithm with a simple preconditioner. Finally, we validate our schemes with numerical experiments on the integrated services digital broadcasting-terrestrial system in doubly-selective channels and determine the normalized MSE and uncoded bit error rate.

This letter presents a robust receiver using the generalized sidelobe canceller aided with the high-order derivative constraint technique for multicarrier code-division multiple-access (MC-CDMA) uplink against carrier frequency offset (CFO). Numerical results demonstrate the efficacy of the proposed receiver.

This letter presents a novel opportunistic cooperative positioning approach for orthogonal frequency-division multiple access (OFDMA) systems. The basic idea is to allow idle mobile terminals (MTs) opportunistically estimating the arrival timing of the training sequences for uplink synchronization from active MTs. The major advantage of the proposed approach over state-of-the-arts is that the positioning-related measurements among MTs are performed without the paid of training overhead. Moreover, Cramer-Rao lower bound (CRLB) is utilized to derive the positioning accuracy limit of the proposed approach, and the numerical results show that the proposed approach can improve the accuracy of non-cooperative approaches with the a-priori stochastic knowledge of clock bias among idle MTs.

Our research is focused on examining a stereoscopic quality assessment model for stereoscopic images with disparate quality in left and right images for glasses-free stereo vision. In this paper, we examine the objective assessment model of 3-D images, considering the difference in image quality between each view-point generated by the disparity-compensated coding. A overall stereoscopic image quality can be estimated by using only predicted values of left and right 2-D image qualities based on the MPEG-7 descriptor information without using any disparity information. As a result, the stereoscopic still image quality is assessed with high prediction accuracy with correlation coefficient=0.98 and average error=0.17.

In this paper, a novel charge coupled device matched filter (CCD-MF) for Electrical code division multiplexing (ECDM) decoder is proposed and experimentally demonstrated. Simulation results clarify the influence of low charge transfer efficiency (CTE) and the validity of a parallel CCD-MF we proposed. A 15-channel ECDM system using a 2 Gchip/s, 2-parallel CCD-MF is experimentally demonstrated.

Orthogonal frequency-division multiplexing (OFDM) is a popular air interface technology that is adopted as a standard modulation scheme for 4G communication systems owing to its excellent spectral efficiency. For OFDM systems, synchronization problems have received much attention along with peak-to-average power ratio (PAPR) reduction. In addition to frequency offset estimation, frame synchronization is a challenging problem that must be solved to achieve optimal system performance. In this paper, we present a maximum likelihood (ML) frame synchronizer for OFDM systems. The synchronizer exploits a synchronization word and cyclic prefixes together to improve the synchronization performance. Numerical results show that the performance of the proposed frame synchronizer is better than that of conventional schemes. The proposed synchronizer can be used as a reference for evaluating the performance of other suboptimal frame synchronizers. We also modify the proposed frame synchronizer to reduce the implementation complexity and propose a near-ML synchronizer for time-varying fading channels.

In this paper, the authors focus on upstream transmission in TDMA-based IEEE 802.16j and propose two time slot assignment algorithms to decrease end-to-end transmission latency. One of the proposed algorithms assigns time slots considering the hop count from a gateway node, and the other takes the path from the relay node to the gateway node into account. In addition, a restriction in assigning time slots is introduced to reduce the delay at each relay node. The algorithms with the restriction assign later time slots considering the time slot order of links connecting a relay node. The performance of the proposed algorithms is evaluated through simulation experiments from the viewpoints of frame size and end-to-end transmission latency, and it is confirmed that the proposed algorithms achieve small transmission latency regardless of packet generation rate in the network, and decrease the transmission latency by up to 70% compared with the existing algorithm.

This paper introduces a unified method of spectrum sensing for all existing analog television (TV) signals including NTSC, PAL and SECAM. We propose a correlation based method (CBM) with a single reference signal for sensing any analog TV signals. In addition we also propose an improved energy detection method. The CBM approach has been implemented in a hardware prototype specially designed for participating in Singapore TV white space (WS) test trial conducted by Infocomm Development Authority (IDA) of the Singapore government. Analytical and simulation results of the CBM method will be presented in the paper, as well as hardware testing results for sensing various analog TV signals. Both AWGN and fading channels will be considered. It is shown that the theoretical results closely match with those from simulations. Sensing performance of the hardware prototype will also be presented in fading environment by using a fading simulator. We present performance of the proposed techniques in terms of probability of false alarm, probability of detection, sensing time etc. We also present a comparative study of the various techniques.

In an orthogonal frequency division multiplexing (OFDM) system, carrier frequency offset (CFO) causes intercarrier interference (ICI) which significantly degrades the system error performance. In this paper we provide a closed-form expression to evaluate the exact error probabilities of arbitrary 2-D modulation OFDM systems with CFO, and analyze the effect of CFO on error performance.

Based on our previous work, this work presents a complete method for time-domain processing of frequency-domain data with evenly-spaced frequency indices, together with its application. The proposed method can be used to calculate the cross spectral and power spectral densities for the frequency indices of interest. A promising application for the time-domain processing of frequency-domain data, particularly for calculating the summation of frequency-domain cross- and auto-correlations in orthogonal frequency-division multiplexing (OFDM) systems, is studied. The advantages of the time-domain processing of frequency-domain data are 1) the ability to rapidly acquire the properties that are readily available in the frequency domain and 2) the reduced complexity. The proposed fast algorithm directly employs time-domain samples, and hence, does not need the fast Fourier transform (FFT) operation. The proposed algorithm has a lower complexity (required complex multiplications ∼ O(N)) than conventional techniques.

Optical code-division multiple-access (OCDMA) is a promising technique for multimedia transmission in fiber-optic local-area networks (LANs). Variable-weight optical orthogonal codes (OOCs) can be used for OCDMA networks supporting multiple quality of services (QoS). Most constructions for optimal variable-weight OOCs have focused on the case where the number of distinct Hamming weights of all codewords is equal to two, and the codewords of weight 3 are normally included. In this letter, four explicit constructions of optimal (υ,{4,5,6},1,Q)-OOCs are presented, and more new optimal (υ,{4,5,6},1,Q)-OOCs are obtained via recursive constructions. These improve the existing results on optimal variable-weight OOCs with at least three distinct Hamming weights and minimum Hamming weight 4.

Photonic integrated circuits (PICs) produced by large-scale integration (LSI) on Si platforms have been intensively researched. Since thermal diffusion from the LSI logic layer is a serious obstacle to realizing a Si-based optical integrated circuit, we have proposed and realized athermal wavelength filters using Si slot waveguides embedded with benzocyclobutene (BCB). First, the athermal conditions were theoretically investigated by controlling the waveguide and gap width of the slot waveguides. In order to introduce the calculated waveguide structures to wavelength filters, the propagation losses and bending losses of the Si slot waveguides were evaluated. The propagation losses were measured to be 5.6 and 5.3 dB/cm for slot waveguide widths of 500 and 700 nm, respectively. Finally, athermal wavelength filters, a ring resonator, and a Mach-Zhender interferometer (MZI) with a slot waveguide width of 700 nm were designed and fabricated. Further, a temperature coefficient of -0.9 pm/K for the operating wavelength was achieved with the athermal MZI.

This paper proposes Direct Spectrum Division Transmission with spectrum editing technique. The transmitter divides the single carrier modulated signal into multiple “sub-spectra” in the frequency domain and arranges each sub-spectrum so as to more fully utilize the unused frequency resources. In the receiver, the divided sub-spectra are combined in the frequency domain and demodulated. By editing the divided spectrum in the frequency domain, the total bandwidth occupied by the multiple “sub-spectra” is less than that of the modulated signal. The proposed technique allows the unused frequency resources scattered across the bands to be better utilized. Simulations show that the proposed technique makes the bit error rate negligible.

This paper presents a general algorithm for pedestrian detection by on-board monocular camera which can be applied to cameras of various view ranges. Under the assumption that motion of background can be nearly approximated as a linear function, the Spatio-Temporal MRF (S-T MRF) model segments foreground objects. The foreground objects contain both pedestrian and non-pedestrian urban objects, verification was conducted by a cascaded classifier. However, the segmentation results based on motion were not exactly fit into pedestrian on the image so that shrunk or inflated pedestrian were generated. This causes errors on extracting pedestrian trajectory. For precise positioning, we implemented two types of feedback algorithm for ROI correction using the Kalman filter and the voting result of Motion-classifier and HOG-classifier. We confirmed that those ROI Corrections successfully extract precise area of pedestrian and decrease the false negative rate. Elaborately extracted pedestrian trajectory could be used as a useful source for predicting collision to pedestrian.

In this paper, we propose a quantitative metric of measuring the degree of the visual fatigue in a stereoscopy. To the best of our knowledge, this is the first simplified relative quantitative approach describing visual fatigue value of a stereoscopy. Our experimental result shows that the correlation index of more than 98% is obtained between our Simplified Relative Visual Fatigue (SRVF) model and Mean Opinion Score (MOS).

Radio frequency on free-space optical (RoFSO) technology is regarded as a new universal platform for enabling seamless convergence of fiber and FSO communication networks, thus extending broadband connectivity to underserved areas. In this paper, we investigate the performance to characterize the transmission of code division multiple access (CDMA) based wireless signals over RoFSO system using aperture averaging (AA) technique under strong turbulence conditions. An analytical model including a modified carrier-to-noise-plus- interference ratio (CNIR) form and a novel closed-form expression for the bit-error rate (BER) is derived. Unlike earlier work, our model takes into consideration the effect of using the AA technique modeled by the gamma-gamma distribution, the optical noises, the intermodulation distortion term due to the laser diode non-linearity and the multiple interference access. By investigating the impact of AA on our model in the strong turbulence regime, we show that there is a design trade-off between the receiver lens aperture and the number of users to achieve a required CNIR ensuring a substantial scintillation fade reduction. The presented work can be used as baseline for the design and performance evaluation of the RoFSO system's ability to transmit different broadband wireless services signals over turbulent FSO links in real scenarios.

Impulsive noise interference is a significant problem for the Integrated Services Digital Broadcasting for Terrestrial (ISDB-T) receivers due to its effect on the orthogonal frequency division multiplexing (OFDM) signal. In this paper, an adaptive scheme to suppress the effect of impulsive noise is proposed. The impact of impulsive noise can be detected by using the guard band in the frequency domain; furthermore the position information of the impulsive noise, including burst duration, instantaneous power and arrived time, can be estimated as well. Then a time-domain window function with adaptive parameters, which are decided in terms of the estimated information of the impulsive noise and the carrier-to-noise ratio (CNR), is employed to suppress the impulsive interference. Simulation results confirm the validity of the proposed scheme, which improved the bit error rate (BER) performance for the ISDB-T receivers in both AWGN channel and Rayleigh fading channel.

In this letter, a novel physical layer signaling transmission scheme is proposed, where the signaling information is conveyed by a pair of training sequences located in the odd and even subcarriers of an orthogonal frequency division multiplexing (OFDM) training symbol. At the receiver side, only a single correlator is required to detect the signaling information. Computer simulations verify the proposed signaling could outperform the S1 signaling and achieve similar robustness as the S2 signaling of the DVB-T2 standard.

In this paper, we propose a simple, yet effective, multiuser detection scheme for a two-hop cooperative CDMAs. In phase 1, the minimum mean square error (MMSE) detector at the destination is used to identify reliable decisions of direct transmissions from the sources and return them to the relays. Then, in phase 2, based on the reliable decisions, the relays and the destination successively utilize the maximum likelihood (ML) detectors to estimate the residual symbols. Due to the destination estimating the symbols separately from direct transmissions and the relaying signals, as a result the destination does not need the information about the relays' decision performance for the construction of the ML detector. Hence, the proposed scheme is more feasible than existing approaches for practical implementation. In addition, due to the ML detectors in phase 2 only estimating the residual symbols, the number of computations performed by the ML detectors can be reduced significantly. The results of simulations and complexity analysis demonstrate the efficiency and effectiveness of the proposed scheme.

When contact failure occurs in a connector in a coaxial high-frequency (HF) signal transmission line, it is well known that common-mode (CM) radiation occurs on the line. We focus on contact conditions in a connector causing such CM radiation. Experiments and simulations verify that CM radiation increases as the contact resistance increases. While the CM current strongly depends on the distribution pattern of contact resistances at a low resistance, the CM current does not depend on these pattern at a high resistance. Our results indicate that it is important to maintain a symmetrical distribution of contact spots whenever the number of such spots is four or more.