This paper discusses the core ambient sensor network (ASN) technologies in view of their support for global connectivity. First, we enumerate ASN services and use cases and then discuss the underlying core technologies, in particular, the importance of the RESTful approach for ensuring global accessibility to sensors and actuators. We also discuss several profile-handling technologies for context-aware services. Finally, we envisage the ASN trends, including our current work for cognitive behavior therapy (CBT) in mental healthcare. We strongly believe that ASN services will become widely available in the real world and an integral part of daily life and society in the near future.

This paper gives an outline of key technologies necessary for science-based agriculture. In order to design future agriculture, present agriculture should be redesigned based on the context of smart agriculture that indicates the overall form of agriculture including a social system while the present precision agriculture shows a technical form of agriculture only. Wireless Sensor Network (WSN) and the various type of optical sensors are assumed to be a basic technology of smart agriculture which intends the harmony with the economic development and sustainable agro-ecosystem. In this paper, the current state and development for the optical sensing for environment and plant are introduced.

Wireless sensor networks play an important role in several industries. Ad-hoc networks with multi-hop transmissions are considered suitable for wireless sensor networks because of their high scalability and low construction cost. However, a lack of centralized control makes it difficult to respond to congestion when system capacity is exceeded. Therefore, the analysis of system capacity is a critical issue for system design. In this paper, we propose a novel zone division model to analyze the capacity of multi-hop wireless sensor networks using carrier sense multiple access with collision avoidance protocols. We divide the one-hop area to a gateway (GW) into two zones: an outer zone, where access nodes (ANs) can relay packets from multi-hop ANs, and an inner zone where ANs cannot relay packets. Using this approach, we calculate the packet loss for each zone to estimate the capacity, considering the difference in the communication range of the GW and ANs, as well as the collision with hidden nodes. Comparisons with simulation results and the conventional method show that our model achieves higher estimation accuracy.

In indoor localization using sensor networks, performance improvements are required for non-line-of-sight (NLOS) environments in which the estimation error is high. NLOS mitigation schemes involve the detection and elimination of the NLOS measurements. The iterative minimum residual (IMR) scheme, which is often applied to the localization scheme using the time of arrival (TOA), is commonly employed for this purpose. The IMR scheme is a low-complexity scheme and its NLOS detection performance is relatively high. However, when there are many NLOS nodes in a sensor field, the NLOS detection error of the IMR scheme increases and the estimation accuracy deteriorates. Therefore, we propose a new scheme that exploits coarse NLOS detection based on stochastic characteristics prior to the application of the IMR scheme to improve the localization accuracy. Improved performances were confirmed in two NLOS channel models by performing numerical simulations.

A mobile ad hoc network (MANET) consists of mobile wireless terminals without using base stations. MANETs are expected to be utilized for various purposes such as traffic jam information announcements for vehicles and safety confirmation systems in disaster. Each MANET uses unique routing protocols that have been adapted for particular applications. Therefore, utilizing a common routing protocol for multiple MANETs is difficult. In this paper, we propose an Autonomous Clustering-based Inter-Domain Routing protocol to communicate between MANETs. Using the autonomous clustering, the proposed inter-domain routing scheme can change the network gateways between MANETs adaptively according to the network topology changes.

Multiple subcarrier passive communication is a new research area which enables a type of frequency division multiple access with wireless and batteryless sensor RF tags just by implementing RF switches to produce dedicated subcarriers. Since the mutual interference among subcarriers is unevenly distributed over the frequency band, careless allocations of subcarrier frequencies may result in degraded network performance and inefficient use of the frequency resource. In this paper, we examine four subcarrier frequency allocation schemes using MATLAB numerical simulations. The four schemes are evaluated in terms of the communication capacity and access fairness among sensor RF tags. We found that the subcarrier allocation scheme plays an important role in multiple subcarrier communication and can improves the communication capacity by 35%.

This paper proposes a rate adaptation scheme (RAS) for a wireless local area network (WLAN) station powered with microwave power transmission (MPT). A WLAN station attempting to transmit data frames when exposed to microwave radiation for MPT, experiences a reduction in the physical (PHY) layer data rate because frames are lost even when the carrier sense mechanism is used. The key idea of the proposed scheme is to utilize the output of the rectenna used for receiving microwave power. Using rectenna output, a WLAN station based on the proposed scheme assesses whether the station is exposed to microwave radiation for MPT. Then, using historical data corresponding to the assessment result, the station selects an appropriate PHY data rate. The historical data are obtained from previous transmission results, e.g., historical data pertaining to the data frame loss ratio. The proposed scheme was implemented and verified through an experiment. Experimental results showed that the proposed scheme prevents the reduction in the PHY data rate, which is caused by the use of historical data stored in a single memory. Thus, the proposed scheme leads to an improvement in the WLAN throughput.

This paper presents a method of imaging a two-dimensional section of a walking person using multiple Doppler radar systems. Although each simple radar system consists of only two receivers, different radial speeds allow target positions to be separated and located. The signal received using each antenna is processed employing time-frequency analysis, which separates targets in the time-range-velocity space. This process is followed by a direction-of-arrival estimation employing interferometry. The data obtained using the multiple radar systems are integrated using a clustering algorithm and a target-tracking algorithm. Through realistic simulations, we demonstrate the remarkable performance of the proposed imaging method in generating a clear outline image of a human target in unknown motion.

Potential games form a class of non-cooperative games where the convergent of unilateral improvement dynamics is guaranteed in many practical cases. The potential game approach has been applied to a wide range of wireless network problems, particularly to a variety of channel assignment problems. In this paper, the properties of potential games are introduced, and games in wireless networks that have been proven to be potential games are comprehensively discussed.

In the log-likelihood ratio (LLR) domain, the belief propagation (BP) decoding algorithm for polar codes incurs high computation complexity due to the computation of the hyperbolic functions in the node update rules. In this paper, we propose a linear approximation method based on the principle of equal spacing to simplify the hyperbolic functions in the BP decoding algorithm. Our method replaces the computation of hyperbolic functions with addition and multiplication operations in the node update rules. Simulation results show that the performance of the modified BP decoding algorithm is almost the same as the original BP decoding algorithm in the low Signal to Noise Ratio (SNR) region, and in the high SNR region the performance of our method is slightly worse. The modified BP decoding algorithm is only implemented with addition and multiplication operations, which greatly reduces computation complexity, and simplifies hardware implementation.

In a previous paper, we proposed a rescue support system for victims buried in an earthquake disaster by constructing an ad-hoc network using home-server based smart homes. However, this system has the following two problems: i) it cannot ensure sufficient density of home servers to realize adequate WLAN coverage, ii) the system does not consider areas in which home servers cannot be used such as parks and factories, for example. In this paper, we propose a new method using a delay tolerant network (DTN) technique. In this method, rescuers (such as rescue teams) with mobile devices relay information between disconnected networks by walking around during rescue activities. For a performance evaluation, we performed simulation experiments using a map of Abeno-ku, Osaka. From our results, we show that the proposed method increases the information acquisition rate, and that the network can be maintained. We also quantitatively show the penetration rate of smart homes needed for our system. In addition, we show that the rescue request system is more effective than other systems, and the method with the mobile device relay is better than without this method.

Round-trip time (RTT) is an important performance metric. Traditional RTT estimation methods usually depend on the cooperation of other networks and particular active or passive measurement platforms, whose global deployments are costly and difficult. Thus a new RTT estimation algorithm, ME algorithm, is introduced. It can estimate the RTT of two hosts communicating through border routers by using TCP CUBIC bulk flow data from those routhers without the use of extra facilities, which makes the RTT estimation in large-scale high-speed networks more effective. In addition, a simpler and more accurate algorithm — AE algorithm — is presented and used when the link has large bandwidth and low packet loss rate. The two proposed algorithms suit sampled flow data because only duration and total packet number of a TCP CUBIC bulk flow are inputs to their calculations. Experimental results show that both algorithms work excellently in real situations. Moreover, they have the potential to be adapted to other TCP versions with slight modification as their basic idea is independent of the TCP congestion control mechanism.

This paper proposes and analyses an improved direction finding (DF) method that uses a rotating interferometer. The minimum sampling frequency is deduced in order to eliminate the phase ambiguity associated with a long baseline, the influence of phase imbalance of receiver is quantitatively discussed and the Root Mean Square Error (RMSE) of both bearing angle and pitch angle are also demonstrated. The theoretical analysis of the rotating interferometer is verified by simulation results, which show that it achieves better RMSE performance than the conventional method.

This paper discusses how to design a Radial Line Slot Antenna (RLSA) whose waveguide is filled with high loss dielectric materials. We introduce a new design for the aperture slot coupling synthesis to restrain the dielectric losses and improve the antenna gain. Based on a newly defined slot coupling, a number of RLSAs with different sizes and loss factors are analyzed and their performances are predicted. Theoretical calculations suggest that the gain is sensitive to the material losses in the radial lines. The gain enhancement by using the new coupling formula is notable for larger antenna size and higher loss factor of the dielectric material. Three prototype RLSAs are designed and fabricated at 60GHz following different slot coupling syntheses, and their measured performances consolidate our theory.

Radio channel modeling is fundamental for designing wireless communication systems. In millimeter or sub-millimeter wave short range communication, shadowing effect by electrically-large objects is one of the most important factors determining the field strength and thus the coverage. Unfortunately, numerical methods like MoM, FDTD, FEM are unable to compute the field scattered by large objects due to their excessive time and memory requirements. Ray theory like geometrical theory of diffraction (GTD) by Keller is an effective and popular solution but suffers various kinds of singularities at geometrical boundaries such as incidence shadow boundary (ISB) or reflection shadow boundary (RSB). Modified edge representation (MER) equivalent edge current (EEC) is an accurate and a fast high frequency diffraction technique which expresses the fields in terms of line integration. It adopts classical Keller-type knife-edge diffraction coefficients and still provides uniform and highly accurate fields everywhere including geometrical boundaries. MER is used here to compute the millimeter-wave field distribution in compact range communication systems where shadowing effects rather than multi-path ones dominate the radio environments. For further simplicity, trigonometric functions in Keller's diffraction coefficients are replaced by the path lengths of source to the observer via the edge point of integration of the scatterers in the form of Fresnel zone number (FZN). Complexity, Computation time and the memory were reduced drastically without degrading the accuracy. The dipole wave scattering from flat rectangular plates is discussed with numerical examples.

A local program insertion (LPI) scheme for video broadcasting systems is proposed by using a novel rotate-and-forward strategy, which can be widely used when a local TV tower (LT) wants to insert its own TV signals into the signals from the main TV tower (MT) without any additional resources. In the proposed LPI scheme, the bit stream of MT is firstly modulated and transmitted through coordinated constellation mapping, Alamouti encoding and OFDM modulation. Then, the LT receives the MT signals and demodulates them into constellation symbols. Finally, the bit stream of LT is mapped as “rotate bit” to rotate the demodulated MT symbols and forward to the users. We show that our proposed LPI scheme does not require extra time or frequency resources and it is also a complexity-reduced scheme for the local TV tower (LT) since bit-level decoding is not required at the LT. In addition, it can increase the network exchanging capacity in term of bits per channel use (bpcu).

We investigate non-orthogonal multiple access (NOMA) with a successive interference canceller (SIC) in the cellular multiple-input multiple-output (MIMO) downlink for systems beyond LTE-Advanced. Taking into account the overhead for the downlink reference signaling for channel estimation at the user terminal in the case of non-orthogonal multiuser multiplexing and the applicability of the SIC receiver in the MIMO downlink, we propose intra-beam superposition coding of a multiuser signal at the transmitter and the spatial filtering of inter-beam interference followed by the intra-beam SIC at the user terminal receiver. The intra-beam SIC cancels out the inter-user interference within a beam. Regarding the transmitter beamforming (precoding), in general, any kind of beamforming matrix determination criteria can be applied to the proposed NOMA method. In the paper, we assume open loop-type random beamforming, which is very efficient in terms of the amount of feedback information from the user terminal. Furthermore, we employ a weighted proportional fair (PF)-based resource (beam of each frequency block and power) allocation for the proposed method. Simulation results show that the proposed NOMA method using the intra-beam superposition coding and SIC simultaneously achieves better sum and cell-edge user throughput compared to orthogonal multiple access (OMA), which is widely used in 3.9 and 4G mobile communication systems.

This paper presents an inter-satellite link (ISL) reassignment method to optimize the snapshot routing performance for polar-orbit LEO satellite networks. When the snapshot routing tables are switching simultaneously in all satellites, we propose to reassign the inter-plane ISLs with regularity to improve the quality of the next snapshot, such as snapshot duration, on-board transceiver utilization ratio and end to end delay. Evaluations indicate that our method can attain equal-length snapshots regardless of the latitude of the polar area border, and so is superior to the natural partition method. Meanwhile, compared with the equal partition method which is used in the Iridium system, our method can prolong 82.87% snapshot duration, increase 8.68% on-board transceiver utilization ratio and reduce 5.30% average end to end delay of the whole network. Therefore, we believe that the ISL reassignment method can be efficiently applied in all practical polar-orbit LEO satellite networks.

User context and user location in particular play an important role in location-based services (LBS). The location can be determined by various positioning methods. These are typically evaluated with average positioning error or percentile values, which are not the most suitable metrics for evaluation of how a positioning method functions in the semantic space. Therefore, we propose a new method for evaluation of positioning accuracy in the semantic space. We focus on two types of semantic user locations that are widely available in urban areas: the street address and the categories of the surrounding points of interest (POIs). We demonstrate its use on ten different positioning methods: a standalone satellite navigation device, GPS module on a smartphone, two versions of Foursquare positioning service, Google positioning service, a positioning service of the local mobile operator, and four other possible variants of mobile operator-based positioning methods. The evaluation suggests that approach with the street addresses is more promising approach due to either sparse or unevenly distributed POIs. Furthermore, some of the positioning methods that are less accurate in Euclidean space, such as a combination of the GPS data with the mobile operator-based method that relies on the propagation models, performed comparably well in the semantic space as the methods that are using more accurate technologies, such as Google and Foursquare.

In cognitive radar systems (CRSs), target scattering coefficients (TSC) can be utilized to improve the performance of target identification and classification. This work considers the problem of TSC estimation for temporally correlated target. Multiple receive antennas are adopted to receive the echo waveforms, which are interfered by the signal-dependent clutter. Unlike existing estimation methods in time domain, a novel estimation method based on Kalman filtering (KF) is proposed in frequency domain to exploit the temporal TSC correlation, and reduce the complexity of subsequent waveform optimization. Additionally, to minimize the mean square error of estimated TSC at each KF iteration, in contrary to existing works, we directly model the design process as an optimization problem, which is non-convex and cannot be solved efficiently. Therefore, we propose a novel method, similar in some way to semi-definite programming (SDP), to convert the non-convex problem into a convex one. Simulation results demonstrate that the estimation performance can be significantly improved by the KF estimation with optimized waveform.

A novel multipath mitigation algorithm for binary offset carrier (BOC) signals in the global navigation satellite system (GNSS) is presented. Based on the W2 code correlation reference waveform (CCRW) structure, a series of bipolar reference waveforms (BRWs) is introduced to shape the unambiguous s-curve. The resulted s-curve has a single stable zero-crossing point such that the tracking unambiguity in BOC (1,1) can be solved. At the same time, multipath mitigation capability is improved as well. As verified by simulations, the proposed method matches the multipath mitigation performance of W2 CCRW, and is superior to conventional receiver correlation techniques. This method can be applied in GPS L1 and Galileo E1.