In high range resolution radar systems, the detection of range-spread target under correlated non-Gaussian clutter faces many problems. In this paper, a novel detector employing an autoregressive (AR) model is proposed to improve the detection performance. The algorithm is elaborately designed and analyzed considering the clutter characteristics. Numerical simulations and measurement data verify the effectiveness and advantages of the proposed detector for the range-spread target in spatially correlated non-Gaussian clutter.

In this paper, we propose a model of a diversity receiver which uses an antenna whose antenna pattern can periodically change. We also propose a minimum mean square error (MMSE) based interference cancellation method of the receiver which, in principle, can suffer from the interference in neighboring frequency bands. Since the antenna pattern changes according to the sum of sinusoidal waveforms with different frequencies, the received signals are received at the carrier frequency and the frequencies shifted from the carrier frequency by the frequency of the sinusoidal waveforms. The proposed diversity scheme combines the components in the frequency domain to maximize the signal-to-noise power ratio (SNR) and to maximize the diversity gain. We confirm that the bit error rate (BER) of the proposed receiver can be improved by increase in the number of arrival paths resulting in obtaining path diversity gain. We also confirm that the proposed MMSE based interference canceller works well when interference signals exist and achieves better BER performances than the conventional diversity receiver with maximum ratio combining.

This paper proposes an encryption-then-compression (EtC) system-friendly data hiding scheme for images, where an EtC system compresses images after they are encrypted. The EtC system divides an image into non-overlapping blocks and applies four block-based processes independently and randomly to the image for visual encryption of the image. The proposed scheme hides data to a plain, i.e., unencrypted image and the scheme can take hidden data out from the image encrypted by the EtC system. Furthermore, the scheme serves reversible data hiding, so it can perfectly recover the unmarked image from the marked image whereas the scheme once distorts unmarked image for hiding data to the image. The proposed scheme copes with the three of four processes in the EtC system, namely, block permutation, rotation/flipping of blocks, and inverting brightness in blocks, whereas the conventional schemes for the system do not cope with the last one. In addition, these conventional schemes have to identify the encrypted image so that image-dependent side information can be used to extract embedded data and to restore the unmarked image, but the proposed scheme does not need such identification. Moreover, whereas the data hiding process must know the block size of encryption in conventional schemes, the proposed scheme needs no prior knowledge of the block size for encryption. Experimental results show the effectiveness of the proposed scheme.

Smart business management has been built to efficiently carry out enterprise business activities and improve its business outcomes in a global business circumstance. Firms have applied their smart business to their business activities in order to enhance the smart business results. The outcome of an enterprise's smart business fulfillment has to be managed and measured to effectively establish and control the smart business environment based on its business plan and business departments. In this circumstance, we need the measurement framework that can reasonably gauge a firm's smart business output in order to control and advance its smart business ability. This research presents a measurement instrument for an enterprise smart business performance in terms of a general smart business outcome. The developed measurement scale is verified on its validity and reliability through factor analysis and reliability analysis based on previous literature. This study presents an 11-item measurement tool that can reasonably gauge a firm smart business performance in both of finance and non-finance perspective.

Software maintenance is an important activity in the software lifecycle. Software maintenance does not only mean removing faults found after software release. Software needs extensions or modifications of its functions owing to changes in the business environment and software maintenance also refers to them. To help users and service suppliers benchmark work efficiency for software maintenance, and to clarify the relationships between software quality, work efficiency, and unit cost of staff, we used a dataset that includes 134 data points collected by the Economic Research Association in 2012, and analyzed the factors that affected the work efficiency of software maintenance. In the analysis, using a multiple regression model, we clarified the relationships between work efficiency and programming language and productivity factors. To analyze the influence to the quality, relationships of fault ratio was analyzed using correlation coefficients. The programming language and productivity factors affect work efficiency. Higher work efficiency and higher unit cost of staff do not affect the quality of software maintenance.

When applying estimation methods, the issue of outliers is inevitable. The extent of their influence has not been clarified, though several studies have evaluated outlier elimination methods. It is unclear whether we should always be sensitive to outliers, whether outliers should always be removed before estimation, and what amount of precaution is required for collecting project data. Therefore, the goal of this study is to illustrate a guideline that suggests how sensitively we should handle outliers. In the analysis, we experimentally add outliers to three datasets, to analyze their influence. We modified the percentage of outliers, their extent (e.g., we varied the actual effort from 100 to 200 person-hours when the extent was 100%), the variables including outliers (e.g., adding outliers to function points or effort), and the locations of outliers in a dataset. Next, the effort was estimated using these datasets. We used multiple linear regression analysis and analogy based estimation to estimate the development effort. The experimental results indicate that the influence of outliers on the estimation accuracy is non-trivial when the extent or percentage of outliers is considerable (i.e., 100% and 20%, respectively). In contrast, their influence is negligible when the extent and percentage are small (i.e., 50% and 10%, respectively). Moreover, in some cases, the linear regression analysis was less affected by outliers than analogy based estimation.

To enhance the user's privacy in electronic ID, anonymous credential systems have been researched. In the anonymous credential system, a trusted issuing organization first issues a certificate certifying the user's attributes to a user. Then, in addition to the possession of the certificate, the user can anonymously prove only the necessary attributes. Previously, an anonymous credential system was proposed, where CNF (Conjunctive Normal Form) formulas on attributes can be proved. The advantage is that the attribute proof in the authentication has the constant size for the number of attributes that the user owns and the size of the proved formula. Thus, various expressive logical relations on attributes can be efficiently verified. However, the previous system has a limitation: The proved CNF formulas cannot include any negation. Therefore, in this paper, we propose an anonymous credential system with constant-size attribute proofs such that the user can prove CNF formulas with negations. For the proposed system, we extend the previous accumulator for the limited CNF formulas to verify CNF formulas with negations.

Due to recent technology progress based on big-data processing, many applications present irregular or unpredictable communication patterns among compute nodes in high-performance computing (HPC) systems. Traditional communication infrastructures, e.g., torus or fat-tree interconnection networks, may not handle well their matchmaking problems with these newly emerging applications. There are already many communication-efficient application mapping algorithms for these typical non-random network topologies, which use nearby compute nodes to reduce the network distances. However, for the above unpredictable communication patterns, it is difficult to efficiently map their applications onto the non-random network topologies. In this context, we recommend using random network topologies as the communication infrastructures, which have drawn increasing attention for the use of HPC interconnects due to their small diameter and average shortest path length (ASPL). We make a comparative study to analyze the impact of application mapping performance on non-random and random network topologies. We propose using topology embedding metrics, i.e., diameter and ASPL, and list several diameter/ASPL-based application mapping algorithms to compare their job scheduling performances, assuming that the communication pattern of each application is unpredictable to the computing system. Evaluation with a large compound application workload shows that, when compared to non-random topologies, random topologies can reduce the average turnaround time up to 39.3% by a random connected mapping method and up to 72.1% by a diameter/ASPL-based mapping algorithm. Moreover, when compared to the baseline topology mapping method, the proposed diameter/ASPL-based topology mapping strategy can reduce up to 48.0% makespan and up to 78.1% average turnaround time, and improve up to 1.9x system utilization over random topologies.

The spike height of volleyball players is important in volleyball analysis as the quantitative criteria to evaluation players' motions, which not only provides rich information to audiences in live broadcast of sports events but also makes contribution to evaluate and improve the performance of players in strategy analysis and players training. In the volleyball game scene, the high similarity between hands, the deformation and the occlusion are three main problems that influence the acquisition performance of spike height. To solve these problems, this paper proposes a body part connection, categorization and occlusion based observation model and a temporal position based correction method. Firstly, skin pixel filter based connection detection solves the problem of high similarity between hands by judging whether a hand is connected to the spike player. Secondly, the body part categorization based observation uses the probability distribution map of hand to determine the category of each body part to solve the deformation problem. Thirdly, the occlusion part detection based observation eliminates the influence of the views with occluded body part by detecting the occluded views with a trained classifier of body part. At last, the temporal position based result correction combines the estimated results, which refers the historical positions, and the posterior result to obtain an optimal result by degree of confidence. The experiments are based on the videos of final and semi-final games of 2014 Japan Inter High School Men's Volleyball in Tokyo Metropolitan Gymnasium, which includes 196 spike sequences of 4 teams. The experiment results of proposed methods are that: 93.37% of test sequences can be successfully detected the spike height, and in which the average error of spike height is 5.96cm.

Ontology describes concepts and relations in a specific domain-knowledge that are important for knowledge representation and knowledge sharing. In the past few years, several tools have been introduced for ontology modeling and editing. To design and develop an ontology is one of the challenge tasks and its challenges are quite similar to software development as it requires many collaborative activities from many stakeholders (e.g. domain experts, knowledge engineers, application users, etc.) through the development cycle. Most of the existing tools do not provide collaborative feature to support stakeholders to collaborate work more effectively. In addition, there are lacking of standard process adoption for ontology development task. Thus, in this work, we incorporated ontology development process into Scrum process as used for process standard in software engineering. Based on Scrum, we can perform standard agile development of ontology that can reduce the development cycle as well as it can be responding to any changes better and faster. To support this idea, we proposed a Scrum Ontology Development Framework, which is an online collaborative framework for agile ontology design and development. Each ontology development process based on Scrum model will be supported by different services in our framework, aiming to promote collaborative activities among different roles of stakeholders. In addition to services such as ontology visualized modeling and editing, we also provide three more important features such as 1) concept/relation misunderstanding diagnosis, 2) cross-domain concept detection and 3) concept classification. All these features allow stakeholders to share their understanding and collaboratively discuss to improve quality of domain ontologies through a community consensus.

We propose a technique to reduce compulsory misses of packet processing cache (PPC), which largely affects both throughput and energy of core routers. Rather than prefetching data, our technique called response prediction cache (RPC) speculatively stores predicted data in PPC without additional access to the low-throughput and power-consuming memory (i.e., TCAM). RPC predicts the data related to a response flow at the arrival of the corresponding request flow, based on the request-response model of internet communications. Our experimental results with 11 real-network traces show that RPC can reduce the PPC miss rate by 13.4% in upstream and 47.6% in downstream on average when we suppose three-layer PPC. Moreover, we extend RPC to adaptive RPC (A-RPC) that selects the use of RPC in each direction within a core router for further improvement in PPC misses. Finally, we show that A-RPC can achieve 1.38x table-lookup throughput with 74% energy consumption per packet, when compared to conventional PPC.

Location and feature representation of object's parts play key roles in fine-grained visual recognition. To promote the final recognition accuracy without any bounding boxes/part annotations, many studies adopt object location networks to propose bounding boxes/part annotations with only category labels, and then crop the images into partial images to help the classification network make the final decision. In our work, to propose more informative partial images and effectively extract discriminative features from the original and partial images, we propose a two-stage approach that can fuse the original features and partial features by evaluating and ranking the information of partial images. Experimental results show that our proposed approach achieves excellent performance on two benchmark datasets, which demonstrates its effectiveness.

Expectation propagation (EP) decoding is proposed for sparse superposition coding in orthogonal frequency division multiplexing (OFDM) systems. When a randomized discrete Fourier transform (DFT) dictionary matrix is used, the EP decoding has the same complexity as approximate message-passing (AMP) decoding, which is a low-complexity and powerful decoding algorithm for the additive white Gaussian noise (AWGN) channel. Numerical simulations show that the EP decoding achieves comparable performance to AMP decoding for the AWGN channel. For OFDM systems, on the other hand, the EP decoding is much superior to the AMP decoding while the AMP decoding has an error-floor in high signal-to-noise ratio regime.

A multi-task convolutional neural network leading to high performance and interpretability via attribute estimation is presented in this letter. Our method can provide interpretation of the classification results of CNNs by outputting attributes that explain elements of objects as a judgement reason of CNNs in the middle layer. Furthermore, the proposed network uses the estimated attributes for the following prediction of classes. Consequently, construction of a novel multi-task CNN with improvements in both of the interpretability and classification performance is realized.

A robust adaptive beamforming algorithm is proposed based on the precise interference-plus-noise covariance matrix reconstruction and steering vector estimation of the desired signal, even existing large gain-phase errors. Firstly, the model of array mismatches is proposed with the first-order Taylor series expansion. Then, an iterative method is designed to jointly estimate calibration coefficients and steering vectors of the desired signal and interferences. Next, the powers of interferences and noise are estimated by solving a quadratic optimization question with the derived closed-form solution. At last, the actual interference-plus-noise covariance matrix can be reconstructed as a weighted sum of the steering vectors and the corresponding powers. Simulation results demonstrate the effectiveness and advancement of the proposed method.

Low Earth Orbit (LEO) satellite networks serve as a powerful complement to the terrestrial networks because of their ability to provide global coverage. In LEO satellite networks, the network is prone to congestion due to several reasons. First, the terrestrial gateways are usually located within a limited region leading to congestion of the nodes near the gateways. Second, routing algorithms that merely adopt shortest paths fail to distribute the traffic uniformly in the network. Finally, the traffic input may exceed the network capacity. Therefore, rate control and load-balancing routing are needed to alleviate network congestion. Moreover, different kinds of traffic have different Quality of Service (QoS) requirements which need to be treated appropriately. In this paper, we investigate joint rate control and load-balancing routing in LEO satellite networks to tackle the problem of network congestion while considering the QoS requirements of different traffic. The joint rate control and routing problem is formulated with the throughput and end-to-end delay requirements of the traffic taken into consideration. Two routing schemes are considered which differ in whether or not different traffic classes can be assigned different paths. For each routing scheme, the joint rate control and routing problem is formulated. A heuristic algorithm based on simulated annealing is proposed to solve the problems. Besides, a snapshot division method is proposed to increase the connectivity of the network and reduce the number of snapshots by merging the links between satellites and gateways. The simulation results show that compared with methods that perform routing and rate control separately, the proposed algorithm improves the overall throughput of the network and provides better QoS guarantees for different traffic classes.