We propose a new design approach to improve the computational efficiency of an optimal design of optical waveguide devices utilizing coupled mode theory (CMT) and a neural network (NN). Recently, the NN has begun to be used for efficient optimal design of optical devices. In this paper, the eigenmode analysis required in the CMT is skipped by using the NN, and optimization with an evolutionary algorithm can be efficiently carried out. To verify usefulness of our approach, optimal design examples of a wavelength insensitive 3dB coupler, a 1 : 2 power splitter, and a wavelength demultiplexer are shown and their transmission properties obtained by the CMT with the NN (NN-CMT) are verified by comparing with those calculated by a finite element beam propagation method (FE-BPM).

This paper discusses how to compute the parametric sensitivity function in continuous-time Markov chains (CTMC). The sensitivity function is the first derivative of the steady-state probability vector regarding a CTMC parameter. Since the sensitivity function is given as a solution of linear equations with a sparse matrix, several linear equation solvers are available to obtain it. In this paper, we consider Jacobi and successive-over relaxation as variants of the Gauss-Seidel algorithm. In addition, we develop an algorithm based on the Takahashi method for the sensitivity function. In numerical experiments, we comprehensively evaluate the performance of these algorithms from the viewpoint of computation time and accuracy.

Capacitive coupling of line coded and DC-balanced digital signals is often used to eliminate steady bias current flow between the systems or components in various communication systems. A multi-layer ceramic chip capacitor is promising for the capacitor of very broadband signal coupling because of its high frequency characteristics expected from the downsizing of the chip recent years. The lower limit of the coupling bandwidth is determined by the capacitance while the higher limit is affected by the parasitic inductance associated with the chip structure. In this paper, we investigate the coupling characteristics up to millimeter wave frequencies by the measurement and simulations. A phenomenon has been found in which the change in the current distribution in the chip structure occur at high frequencies and the coupling characteristics are improved compared to the prediction based on the conventional equivalent circuit model. A new equivalent circuit model of chip capacitor that can express the effect of the improvement has been proposed.

Communication networks for wide-scale distributed energy resources (DERs) including photovoltaics (PVs), wind, storage and battery systems and electric vehicles (EVs) will be indispensable in future power grids. In this paper, we compare optical fronthaul networks using existing optical ground wires (OPGWs) for centralized radio access network (C-RAN) architecture to realize cost effective wireless communication network expansion including low population area. We investigate the applicability of optical data transport technologies of physical layer split (PLS), analog radio-on-fiber (ARoF), and common public radio interface (CPRI). The deployment costs of them are comparatively analyzed. It was shown that physical layer split and analog radio-on-fiber with subcarrier multiplexing (SCM) result in lower cost than other technologies.

This paper proposes a noise reduction technology for a specific frequency band that uses the pulse coding controlled method to automatically set the notch frequency in DC-DC switching converters of communication equipment. For reducing the power levels at the frequency and its harmonics in the switching converter, we often use a frequency-modulated clock. This paper investigates a technology that prevents modulated clock frequency noise from spreading into protected frequency bands; this proposed noise reduction technology does not distribute the switching noise into some specified frequency bands. The notch in the spectrum of the switching pulses is created by the Pulse Width Coding (PWC) method. In communication devices, the noise in the receiving signal band must be as small as possible. The notch frequency is automatically set to the frequency of the received signal by adjusting the clock frequency using the equation Fn = (P+0.5)Fck. Here Fn is the notch frequency, Fck is the clock frequency, and P is a positive integer that determines the noise spectrum location. Therefore, simply be setting the notch frequency to the received signal frequency can suppress the noise present. We confirm with simulations that the proposed technique is effective for noise reduction and notch generation. Also we implement a method of automatic switching between two receiving channels. The conversion voltage ratio in the pulse width coding method switching converter is analyzed and full automatic notch frequency generation is realized. Experiments on a prototype circuit confirm notch frequency generation.

In inter-data center networks where high transmission capacity and spectral efficiency are required, a 16QAM format is deployed. On the other hand, in intra-data center networks, a PAM4 format is deployed to meet the demand for a simple and low-cost transceiver configuration. For a seamless and effective connection of such heterogeneous networks without using optical-electrical-optical conversion, an all-optical modulation format conversion technique is required. In this paper, we propose an all-optical PAM4 to 16QAM modulation format conversion using nonlinear optical loop mirror. The successful conversion operation from 2 × 26.6-Gbaud PAM4 signals to a 100-Gbps class 16QAM signal is verified by numerical simulation. Compared with an ideal 16QAM signal, the power penalty of the converted 16QAM signal can be kept within 0.51dB.

We propose a coding/decoding strategy that surpasses the symmetric information rate of a binary insertion/deletion (ID) channel and approaches the Markov capacity of the channel. The proposed codes comprise inner trellis codes and outer irregular low-density parity-check (LDPC) codes. The trellis codes are designed to mimic the transition probabilities of a Markov input process that achieves a high information rate, whereas the LDPC codes are designed to maximize an iterative decoding threshold in the superchannel (concatenation of the ID channels and trellis codes).

Authors had proposed a hybrid electromagnetic field analysis method suitable for an airport surface so far. In this paper, the hybrid method is validated by measurements by using a 1/50 scale-model of an airport considering several layouts of the buildings and sloping ground. The measured power distributions agreed with the analyzed ones within 5 dB errors excepting null points and the null positions of the distribution is also estimated within one wavelength errors.

We have developed an adaptation method which allows the customization of example-based dialog systems for individual users by applying “plus” and “minus” operations to the distributed representations obtained using the word2vec method. After retrieving user-related profile information from the Web, named entity extraction is applied to the retrieval results. Words with a high term frequency-inverse document frequency (TF-IDF) score are then adopted as user related words. Next, we calculate the similarity between the distrubuted representations of selected user-related words and nouns in the existing example phrases, using word2vec embedding. We then generate phrases adapted to the user by substituting user-related words for highly similar words in the original example phrases. Word2vec also has a special property which allows the arithmetic operations “plus” and “minus” to be applied to distributed word representations. By applying these operations to words used in the original phrases, we are able to determine which user-related words can be used to replace the original words. The user-related words are then substituted to create customized example phrases. We evaluated the naturalness of the generated phrases and found that the system could generate natural phrases.

Troika is a recently proposed sponge-based hash function for IOTA's ternary architecture and platform, which is developed by CYBERCRYPT and is now used in IOTA's blockchain. In this paper, we introduce the preimage attack on 2/3 rounds of Troika with a divide-and-conquer approach. Firstly, we propose the equivalent conditions to determine whether a message is the preimage with an algebraic method. As a result, for the preimage attack on two-round Troika, we can search the preimage only in a valid smaller space and efficiently enumerate the messages which can satisfy most of the equivalent conditions with a guess-and-determine technique. Our experiments show that the time complexity of the preimage attack on 2-round Troika can be improved to 379 from 3243. For the preimage attack on 3-round Troika, the MILP-based method is applied to achieve the optimal time complexity, which is 327 times faster than brute force.

The test of homogeneity for normal mixtures has been used in various fields, but its theoretical understanding is limited because the parameter set for the null hypothesis corresponds to singular points in the parameter space. In this paper, we shed a light on this issue from a new perspective, variational Bayes, and offer a theory for testing homogeneity based on it. Conventional theory has not reveal the stochastic behavior of the variational free energy, which is necessary for constructing a hypothesis test, has remained unknown. We clarify it for the first time and construct a new test base on it. Numerical experiments show the validity of our results.

A compact optical polarization converter (PC) based on slot waveguide has been proposed in this study. Utilizing the high refractive index contrast between a Si waveguide and SiO2 cladding on the silicon-on-insulator platform, the light beam can be strongly confined in a slot waveguide structure. The proposed PC consists of a square waveguide and an L-shape cover waveguide. Since the overall structure is symmetrically distributed along the axis rotated 45-degree from the horizontal direction, the optical axis of this PC lies in the direction with equi-angle from two orthogonally polarized modes of the input and output ends, which leads to a high polarization conversion efficiency (PCE). 3D FDTD simulation results illustrate that a TE-to-TM mode conversion is achieved with a device length of 8.2 µm, and the PCE exceeds 99.8%. The structural tolerance and wavelength dependence of the PC have also been discussed in detail.

When using a gesture-based interface for pointing to targets on a wide screen, displaying a large pointer instead of a typical spot pattern reduces disturbance caused by measurement errors of user's pointing posture. However, it remains unclear why a large pointer helps facilitate easy pointing. To examine this issue, in this study we propose a mathematical model that formulates human pointing motions affected by a large pointer. Our idea is to describe the effect of the large pointer as human visual perception, because the user will perceive the pointer-target distance as being shorter than it actually is. We embedded this scheme, referred to as non-linear distance filter (NDF), into a typical feedback loop model designed to formulate human pointing motions. We also proposed a method to estimate NDF mapping from pointing trajectories, and used it to investigate the applicability of the model under three typical disturbance patterns: small vibration, smooth shift, and step signal. Experimental results demonstrated that the proposed NDF-based model could accurately reproduced actual pointing trajectories, achieving high similarity values of 0.89, 0.97, and 0.91 for the three respective disturbance patterns. The results indicate the applicability of the proposed method. In addition, we confirmed that the obtained NDF mappings suggested rationales for why a large pointer helps facilitate easy pointing.

Multi-cycle Test looks promising a way to reduce the test application time of POST (Power-on Self-Test) for achieving a targeted high fault coverage specified by ISO26262 for testing automotive devices. In this paper, we first analyze the mechanism of Stuck-at Fault Detection Degradation problem in multi-cycle test. Based on the result of our analysis we propose a novel solution named FF-Control Point Insertion technique (FF-CPI) to achieve the reduction of scan-in patterns by multi-cycle test. The FF-CPI technique modifies the captured values of scan Flip-Flops (FFs) during capture operation by directly reversing the value of partial FFs or loading random vectors. The FF-CPI technique enhances the number of detectable stuck-at faults under the capture patterns. The experimental results of ISCAS89 and ITC99 benchmarks validated the effectiveness of FF-CPI technique in scan-in pattern reduction for POST.

The communications quality of content delivery networks (CDNs), which are geographically distributed networks that have been optimized for content delivery, deteriorates when interflow congestion conditions are severe. Herein, we propose an adaptive server and path switching scheme that is based on the estimated acquisition throughput of each path. We also provide simulation results that show our proposed method can provide higher throughput performance levels than existing methods.

This paper proposes a voice conversion (VC) method based on a model that links linguistic and acoustic representations via latent phonological distinctive features. Our method, called speech chain VC, is inspired by the concept of the speech chain, where speech communication consists of a chain of events linking the speaker's brain with the listener's brain. We assume that speaker identity information, which appears in the acoustic level, is embedded in two steps — where phonological information is encoded into articulatory movements (linguistic to physiological) and where articulatory movements generate sound waves (physiological to acoustic). Speech chain VC represents these event links by using an adaptive restricted Boltzmann machine (ARBM) introducing phoneme labels and acoustic features as two classes of visible units and latent phonological distinctive features associated with articulatory movements as hidden units. Subjective evaluation experiments showed that intelligibility of the converted speech significantly improved compared with the conventional ARBM-based method. The speaker-identity conversion quality of the proposed method was comparable to that of a Gaussian mixture model (GMM)-based method. Analyses on the representations of the hidden layer of the speech chain VC model supported that some of the hidden units actually correspond to phonological distinctive features. Final part of this paper proposes approaches to achieve one-shot VC by using the speech chain VC model. Subjective evaluation experiments showed that when a target speaker is the same gender as a source speaker, the proposed methods can achieve one-shot VC based on each single source and target speaker's utterance.

For low-density parity-check (LDPC) codes, the penalized decoding method based on the alternating direction method of multipliers (ADMM) can improve the decoding performance at low signal-to-noise ratios and also has low decoding complexity. There are three effective methods that could increase the ADMM penalized decoding speed, which are reducing the number of Euclidean projections in ADMM penalized decoding, designing an effective penalty function and selecting an appropriate layered scheduling strategy for message transmission. In order to further increase the ADMM penalized decoding speed, through reducing the number of Euclidean projections and using the vertical layered scheduling strategy, this paper designs a fast converging ADMM penalized decoding method based on the improved penalty function. Simulation results show that the proposed method not only improves the decoding performance but also reduces the average number of iterations and the average decoding time.

This paper proposes a new and effective convolutional neural network model termed OFR-Net for optical flow refinement. The OFR-Net exploits the spatial correlation between images and optical flow fields. It adopts a pyramidal codec structure with residual connections, dense connections and skip connections within and between the encoder and decoder, to comprehensively fuse features of different scales, locally and globally. We also introduce a warp loss to restrict large displacement refinement errors. A series of experiments on the FlyingChairs and MPI Sintel datasets show that the OFR-Net can effectively refine the optical flow predicted by various methods.

Large-scale disasters can lead to a severe damage or destruction of optical transport networks including the data-plane (D-plane) and control and management-plane (C/M-plane). In addition to D-plane recovery, quick recovery of the C/M-plane network in modern software-defined networking (SDN)-based fiber optical networks is essential not only for emergency control of surviving optical network resources, but also for quick collection of information related to network damage/survivability to enable the optimal recovery plan to be decided as early as possible. With the advent of the Internet of Things (IoT) technologies, low energy consumption, and low-cost IoT devices have been more common. Corresponding long-distance networking technologies such as low-power wide-area (LPWA) and LPWA-based mesh (LPWA-mesh) networks promise wide coverage sensing and environment data collection capabilities. We are motivated to take an infrastructure-less IoT approach to provide long-distance, low-power and inexpensive wireless connectivity and create an emergency C/M-plane network for early disaster recovery. In this paper, we investigate the feasibility of fiber networks C/M-plane recovery using an IoT-based extremely narrow-band, and lossy links system (FRENLL). For the first time, we demonstrate a field-trial experiment of a long-latency/loss tolerable SDN C/M-plane that can take advantage of widely available IoT resources and easy-to-create wireless mesh networks to enable the timely recovery of the C/M-plane after disaster.

A new structure of the electro-optic modulator to compensate the third-order intermodulation distortion (IMD3) is introduced. The modulator includes two Mach-Zehnder modulators (MZMs) operating with frequency chirp and the two modulated outputs are combined with an adequate phase difference. We revealed by theoretical analysis and numerical calculations that the IMD3 components in the receiver output could be selectively suppressed when the two MZMs operate with chirp parameters of opposite signs to each other. Spectral power of the IMD3 components in the proposed modulator was more than 15dB lower than that in a normal Mach-Zehnder modulator at modulation index between 0.15π and 0.25π rad. The IMD3 compensation properties of the proposed modulator was experimentally confirmed by using a dual parallel Mach-Zehnder modulator (DPMZM) structure. We designed and fabricated the modulator with the single-chip structure and the single-input operation by integrating with 180° hybrid coupler on the modulator substrate. Modulation signals were applied to each modulation electrode by the 180° hybrid coupler to set the chirp parameters of two MZMs of the DPMZM. The properties of the fabricated modulator were measured by using 10GHz two-tone signals. The performance of the IMD3 compensation agreed with that in the calculation. It was confirmed that the IMD3 compensation could be realized even by the fabricated modulator structure.