In this paper, we present a joint multi-patch and multi-task convolutional neural networks (JMM-CNNs) framework to learn more descriptive and robust face representation for face recognition. In the proposed JMM-CNNs, a set of multi-patch CNNs and a feature fusion network are constructed to learn and fuse global and local facial features, then a multi-task learning algorithm, including face recognition task and pose estimation task, is operated on the fused feature to obtain a pose-invariant face representation for the face recognition task. To further enhance the pose insensitiveness of the learned face representation, we also introduce a similarity regularization term on features of the two tasks to propose a regularization loss. Moreover, a simple but effective patch sampling strategy is applied to make the JMM-CNNs have an end-to-end network architecture. Experiments on Multi-PIE dataset demonstrate the effectiveness of the proposed method, and we achieve a competitive performance compared with state-of-the-art methods on Labeled Face in the Wild (LFW), YouTube Faces (YTF) and MegaFace Challenge.

This paper presents analysis results of the intermodulation distortion (IMD) components compensation conditions for dual-band feed-forward power amplifier (FFPA) when inputting dual-band signals simultaneously. The signal cancellation loop and distortion cancellation loop of the dual-band FFPA have frequency selective adjustment paths which consist of filter and vector regulator. The filter selects the desired frequency component and suppresses the undesired frequency component in the desired frequency selective adjustment path. The vector regulators repeatedly adjust the amplitude and phase values of the composite components for the desired and suppressed undesired frequency components. In this configuration, the cancellation levels of the signal cancellation loop and distortion cancellation loop are depending on the amplitude and phase errors of the vector regulator. The analysis results show that the amplitude and phase errors of the desired frequency component almost become independent that of the undesired frequency component in a weak non-linearity condition, when the isolation between the desired band and the undesired band given by the filter is more than 40 dB. The amplitude errors of the desired frequency component are dependent on that of the undesired frequency component in a strong non-linear conditions when the isolation level sets as above. A 1-W-class signal cancellation loop and 20-W-class FFPA are fabricated for 1.7-GHz and 2.1-GHz bands simultaneous operation. The experimental results show that the analysis results are suitable in the experimental conditions. From these investigations, the analysis results can provide a commercially available dual-band FFPA. To our best knowledge, this is first analysis results for the dual-band FFPA.

Recently, we demonstrated a rapid-single-flux-quantum NOT gate comprising a toggle storage loop. In this paper, we present our design and operation of a NOR gate that is a straightforward extension of the NOT gate by attaching a confluence buffer. Parameter margins wider than ±28% were confirmed in simulation. Functional tests using Nb integrated circuits demonstrated correct NOR operation with a bias margin of ±21%.

This paper presents a large-angle imaging algorithm based on a dynamic scattering model for inverse synthetic aperture radar (ISAR). In this way, more information can be presented in an ISAR image than an ordinary RD image. The proposed model describes the scattering characteristics of ISAR target varying with different observation angles. Based on this model, feature points in each sub-image of the ISAR targets are extracted and matched using the scale-invariant feature transform (SIFT) and random sample consensus (RANSAC) algorithms. Using these feature points, high-precision rotation angles are obtained via joint estimation, which makes it possible to achieve a large angle imaging using the back-projection algorithm. Simulation results verifies the validity of the proposed method.

Speech enhancement has been proposed to reduce the impulsive noise whose frequency characteristic is wideband. On the other hand, it is challenging to reduce the ringing sound, which is narrowband in impulsive noise. Therefore, we propose the modeling of the ringing sound and its estimation by a linear predictor (LP). However, it is difficult to estimate the ringing sound only in noisy speech due to the auto-correlation property of speech. The proposed system adopts the 4th order moment-based adaptive algorithm by noticing the difference between the 4th order statistics of speech and impulsive noise. The brief analysis and simulation results show that the proposed system has the potential to reduce ringing sound while keeping the quality of enhanced speech.

In the typical unmanned aircraft system (UAS), several unmanned aerial vehicles (UAVs) traveling at a velocity of 40-100km/h and with altitudes of 150-1,000m will be used to cover a wide service area. Therefore, Doppler shifts occur in the carrier frequencies of the transmitted and received signals due to changes in the line-of-sight velocity between the UAVs and the terrestrial terminal. By observing multiple Doppler shift values for different UAVs or observing a single UAV at different local times, it is possible to detect the user position on the ground. We conducted computer simulations for evaluating user position detection accuracy and Doppler shift distribution in several flight models. Further, a positioning accuracy index (PAI), which can be used as an index for position detection accuracy, was proposed as the absolute value of cosine of the inner product between two gradient vectors formed by Doppler shifts to evaluate the relationship between the location of UAVs and the position of the user. In this study, a maximum positioning error estimation method related to the PAI is proposed to approximate the position detection accuracy. Further, computer simulations assuming a single UAV flying on the curved routes such as sinusoidal routes with different cycles are conducted to clarify the effectiveness of the flight route in the aspects of positioning accuracy and latency by comparing with the conventional straight line fight model using the PAI and the proposed maximum positioning error estimation method.

A ring-resonator type of electrode (RRTE) has been proposed to detect the circulating tumor cell (CTC) for evaluation of the current cancer progression and malignancy in clinical applications. Main emphasis is placed on the identification sensitivity for the lossy materials that can be found in biomedical fields. At first, the possibility of the CTC detection was numerically considered to calculate the resonant frequency of the RRTE catching the CTC, and it was evident that the RRTE with the cell has the resonant frequency inherent in the cell featured by its complex permittivity. To confirm the numerical consideration, the BaTiO3 particle, whose size was similar to that of the CTC, was inserted in the RRTE instead of the CTC as a preliminary experiment. Next, the resonant frequencies of the RRTE with internal organs of the beef cattle such as liver, lung, and kidney were measured for evaluation of the lossy materials such as the CTC, and degraded Q curves were observed because the Q-factors inherent in the internal organs were usually low due to the poor loss tangents. To overcome such difficulty, the RRTE, the oscillator circuit consisting of the FET being added, was proposed to improve the identification sensitivity. Comparing the identification sensitivity of the conventional RRTE, it has been improved because the oscillation frequency spectrum inherent in an internal organ could be easily observed thanks to the oscillation condition with negative resistance. Thus, the validity of the proposed technique has been confirmed.

In this study, the transient characteristics on the super-steep subthreshold slope (SS) of a PN-body tied (PNBT) silicon-on-insulator field-effect transistor (SOI-FET) were investigated using technology computer-aided design and pulse measurements. Carrier charging effects were observed on the super-steep SS PNBT SOI-FET. It was found that the turn-on delay time decreased to nearly zero when the gate overdrive-voltage was set to 0.1-0.15 V. Additionally, optimizing the gate width improved the turn-on delay. This has positive implications for the low speed problems of this device. However, long-term leakage current flows on turn-off. The carrier lifetime affects the leakage current, and the device parameters must be optimized to realize both a high on/off ratio and high-speed operation.

In this paper, we propose a user-assisted QoS control scheme that utilizes media adaptive buffering to enhance QoE of audiovisual and haptic IP communications. The scheme consists of two modes: a manual mode and an automatic mode. It enables users to switch between these two modes according to their inclinations. We compare four QoS control schemes: the manual mode only, the automatic mode only, the switching scheme starting with the manual mode, and the switching scheme starting with the automatic mode. We assess the effects of the four schemes, user attributes, and tasks on QoE through a subjective experiment which provides information on users' behavior in addition to QoE scores. As a result of the experiment, we show that the user-assisted QoS control scheme can enhance QoE. Furthermore, we notice that the proper QoS control scheme depends on user attributes and tasks.

In this paper, we propose a decentralized probabilistic frequency-block activation control method for the cellular downlink. The aim of the proposed method is to increase the downlink system throughput within the system coverage by adaptively controlling the individual activation of each frequency block at all base stations (BSs) to achieve inter-cell interference coordination (ICIC) and traffic load balancing. The proposed method does not rely on complicated inter-BS cooperation. It uses only the inter-BS information exchange regarding the observed system throughput levels with the neighboring BSs. Based on the shared temporal system throughput information, each BS independently controls online the activation of their respective frequency blocks in a probabilistic manner, which autonomously achieves ICIC and load balancing among BSs. Simulation results show that the proposed method achieves greater system throughput and a faster convergence rate than the conventional online probabilistic activation/deactivation control method. We also show that the proposed method successfully tracks dynamic changes in the user distribution generated due to mobility.

Introduction of Fully Convolutional Networks (FCNs) has made record progress in salient object detection models. However, in order to retain the input resolutions, deconvolutional networks with unpooling are applied on top of FCNs. This will cause the increase of the computation and network model size in segmentation task. In addition, most deep learning based methods always discard effective saliency prior knowledge completely, which are shown effective. Therefore, an efficient salient object detection method based on deep learning is proposed in our work. In this model, dilated convolutions are exploited in the networks to produce the output with high resolution without pooling and adding deconvolutional networks. In this way, the parameters and depth of the network are decreased sharply compared with the traditional FCNs. Furthermore, manifold ranking model is explored for the saliency refinement to keep the spatial consistency and contour preserving. Experimental results verify that performance of our method is superior with other state-of-art methods. Meanwhile, the proposed model occupies the less model size and fastest processing speed, which is more suitable for the wearable processing systems.

A spectrum suppressed transmission that increases the frequency utilization efficiency, defined as throughput/bandwidth, by suppressing the required bandwidth has been proposed. This is one of the most effective schemes to solve the exhaustion problem of frequency bandwidths. However, in spectrum suppressed transmission, its transmission quality potentially degrades due to the ISI making the bandwidth narrower than the Nyquist bandwidth. In this paper, in order to improve the transmission quality degradation, we propose the spectrum suppressed transmission applying both FEC (forward error correction) and LE (linear equalization). Moreover, we also propose a new channel allocation scheme for the spectrum suppressed transmission, in multi-channel environments over a satellite transponder. From our computer simulation results, we clarify that the proposed schemes are more effective at increasing the system throughput than the scheme without spectrum suppression.

In this letter, we propose a hierarchical segmentation (HS) method for color images, which can not only maintain the segmentation accuracy, but also ensure a good speed. In our method, HS adopts the fuzzy simple linear iterative clustering (Fuzzy SLIC) to obtain an over-segmentation result. Then, HS uses the fast fuzzy C-means clustering (FFCM) to produce the rough segmentation result based on superpixels. Finally, HS takes the non-iterative K-means clustering using priority queue (KPQ) to refine the segmentation result. In the validation experiments, we tested our method and compared it with state-of-the-art image segmentation methods on the Berkeley (BSD500) benchmark under different types of noise. The experiment results show that our method outperforms state-of-the-art techniques in terms of accuracy, speed and robustness.

To conduct empirical research on industry software development, it is necessary to obtain data of real software projects from industry. However, only few such industry data sets are publicly available; and unfortunately, most of them are very old. In addition, most of today's software companies cannot make their data open, because software development involves many stakeholders, and thus, its data confidentiality must be strongly preserved. To that end, this study proposes a method for artificially generating a “mimic” software project data set, whose characteristics (such as average, standard deviation and correlation coefficients) are very similar to a given confidential data set. Instead of using the original (confidential) data set, researchers are expected to use the mimic data set to produce similar results as the original data set. The proposed method uses the Box-Muller transform for generating normally distributed random numbers; and exponential transformation and number reordering for data mimicry. To evaluate the efficacy of the proposed method, effort estimation is considered as potential application domain for employing mimic data. Estimation models are built from 8 reference data sets and their concerning mimic data. Our experiments confirmed that models built from mimic data sets show similar effort estimation performance as the models built from original data sets, which indicate the capability of the proposed method in generating representative samples.

The security and reliability of Arabic text exchanged via the Internet have become a challenging area for the research community. Arabic text is very sensitive to modify by malicious attacks and easy to make changes on diacritics i.e. Fat-ha, Kasra and Damma, which are represent the syntax of Arabic language and can make the meaning is differing. In this paper, a Hybrid of Natural Language Processing and Zero-Watermarking Approach (HNLPZWA) has been proposed for the content authentication and tampering detection of Arabic text. The HNLPZWA approach embeds and detects the watermark logically without altering the original text document to embed a watermark key. Fifth level order of word mechanism based on hidden Markov model is integrated with digital zero-watermarking techniques to improve the tampering detection accuracy issues of the previous literature proposed by the researchers. Fifth-level order of Markov model is used as a natural language processing technique in order to analyze the Arabic text. Moreover, it extracts the features of interrelationship between contexts of the text and utilizes the extracted features as watermark information and validates it later with attacked Arabic text to detect any tampering occurred on it. HNLPZWA has been implemented using PHP with VS code IDE. Tampering detection accuracy of HNLPZWA is proved with experiments using four datasets of varying lengths under multiple random locations of insertion, reorder and deletion attacks of experimental datasets. The experimental results show that HNLPZWA is more sensitive for all kinds of tampering attacks with high level accuracy of tampering detection.

Automatic disassembly of railway fasteners is of great significance for improving the efficiency of replacing rails. The accurate positioning of fastener is the key factor to realize automatic disassembling. However, most of the existing literature mainly focuses on fastener region positioning and the literature on accurate positioning of fasteners is scarce. Therefore, this paper constructed a visual inspection system for accurate positioning of fastener (VISP). At first, VISP acquires railway image by image acquisition subsystem, and then the subimage of fastener can be obtained by coarse-to-fine method. Subsequently, the accurate positioning of fasteners can be completed by three steps, including contrast enhancement, binarization and spike region extraction. The validity and robustness of the VISP were verified by vast experiments. The results show that VISP has competitive performance for accurate positioning of fasteners. The single positioning time is about 260ms, and the average positioning accuracy is above 90%. Thus, it is with theoretical interest and potential industrial application.

Neural networks have received considerable attention in sentence similarity measuring systems due to their efficiency in dealing with semantic composition. However, existing neural network methods are not sufficiently effective in capturing the most significant semantic information buried in an input. To address this problem, a novel weighted-pooling attention layer is proposed to retain the most remarkable attention vector. It has already been established that long short-term memory and a convolution neural network have a strong ability to accumulate enriched patterns of whole sentence semantic representation. First, a sentence representation is generated by employing a siamese structure based on bidirectional long short-term memory and a convolutional neural network. Subsequently, a weighted-pooling attention layer is applied to obtain an attention vector. Finally, the attention vector pair information is leveraged to calculate the score of sentence similarity. An amalgamation of both, bidirectional long short-term memory and a convolutional neural network has resulted in a model that enhances information extracting and learning capacity. Investigations show that the proposed method outperforms the state-of-the-art approaches to datasets for two tasks, namely semantic relatedness and Microsoft research paraphrase identification. The new model improves the learning capability and also boosts the similarity accuracy as well.

With increasing technology scaling and the use of lower voltages, more research interest is being shown in variability-tolerant analog front end design. In this paper, we describe an adaptive amplitude control transmitter that is operated using differential signaling to reduce the temperature variability effect. It enables low power, low voltage operation by synergy between adaptive amplitude control and Vth temperature variation control. It is suitable for high-speed interface applications, particularly cable interfaces. By installing an aggressor circuit to estimate transmitter jitter and changing its frequency and activation rate, we were able to analyze the effects of the interface block on the input buffer and thence on the entire system. We also report a detailed estimation of the receiver clock-data recovery (CDR) operation for transmitter jitter estimation. These investigations provide suggestions for widening the eye opening of the transmitter.

4K/8K satellite broadcasting featuring ultra-high definition video and sound was launched in Japan in 2018. This is the first 8K ultra high definition television (UHDTV) broadcasting in the world, with 16 times as many pixels as HDTV and 3D sound with 22.2ch audio. The large amount of information that has to be transmitted means that a new satellite broadcasting transmission system had to be developed. In this paper, we describe this transmission system, focusing on the technology that enables 4K/8K UHDTV satellite broadcasting.

Secure multi-party computation (MPC) allows a set of parties to compute a function jointly while keeping their inputs private. MPC has been actively studied, and there are many research results both in the theoretical and practical research fields. In this paper, we introduce the basic matters on MPC and show recent practical advances. We first explain the settings, security notions, and cryptographic building blocks of MPC. Then, we show and discuss current situations on higher-level secure protocols, privacy-preserving data analysis, and frameworks/compilers for implementing MPC applications with low-cost.