The bit error performance of a Direct Sequence Spread Spectrum Communication system in actual land mobile satellite channel is evaluated with experiments. Field test results with the ETS-V satellite in urban and suburban environments at L-band frequency show that this land mobile satellite channel of 3MHz bandwidth can be seen as a non-frequency selective Rician fading channel as well as shadowing channel. The bit error performance can be estimated from signal power measurement as in the case of narrow band modulation signals.

A narrowband interference in direct sequence spread spectrum communication systems also affects the characteristics of a delay lock loop. In this paper, the delay errors of a baseband delay lock loop (DLL) in the presence of the interference which consists of a narrowband Gaussian noise and several tones are examined, and when a filter is used to reject the interference, the characteristics of the DLL are analyzed using the Fourier method. Furthermore, from the calculation results of the delay error in case where a prediction error filter with two-sided taps is used as the rejection filter, it is shown that the filter is necessary to keep the DLL in the lock-on state.

In this paper we consider multiuser detection using a neural network in a synchronous code-division multiple-access channel. In a code-division multiple-access channel, a matched filter is widely used as a receiver. However, when the relative powers of the interfering signals are large, i.e. the near-far problem, the performances of the matched filter receiver degrade. Although the optimum receiver for multiuser detection is superior to the matched filter receiver in such situations, the optimum receiver is too complex to be implemented. A simple technique to implement the optimum multiuser detection is required. Recurrent neural networks which consist of a number of simple processing units can rapidly provide a collectively-computed solution. Moreover, the network can seek out a minimum in the energy function. On the other hand, the optimum multiuser detection in a synchronous channel is carried out by the maximization of a likelihood function. In this paper, it is shown that the energy function of the neural network is identical to the likelihood function of the optimum multiuser detection and the neural network can be used to implement the optimum multiuser detection. Performance comparisons among the optimum receiver, the matched filter one and the neural network one are carried out by computer simulations. It is shown that the neural network receiver has a capability to achieve near-optimum performance in several situations and local minimum problems are few serious.

Power transmission properties are investigated for a butt-joint which contains an air gap between an isotropic planar waveguide and an anisotropic one whose optical axis is lying in the plane defined by the propagation axis and the normal of the waveguide surface. New transmission coefficients are introduced for estimating the optical-power which is launched out into the gap from the incoming waveguide. Wave propagation through the gap is analyzed on the basis of the BPM concept. And the power transmitted across the interface between the gap and the outgoing waveguide is evaluated by means of the overlap integral of the field profiles. The effects of the air gap and the refractive index of filling liquid as well as axial displacement and angular misalignment are discussed on the basis of numerical results.

To clarify the stereopsis disturbance in patients with Alzheimer's disease (AD), we analyzed binocular eye movement when subjects shifted their gaze between targets at different depths. Subjects are patients with Alzheimer's disease, Mluti-infarct dementia (MID), or Olivopontocerebellar atrophy (OPCA), and healthy controls. Targets are arranged in two ways: along the median plane and asymmetrically crossing the median plane, at distances from the eyes of 1000 mm and 300 mm. When the targets are switched at the onset of a beep, the subjects shifted their gaze to the lit target. The experiment is conducted in a dimly lit room whose structure is capable of providing good binocular cues for depth. In AD subjects, especially in the subjects whose symptoms are moderate (advanced stage), vergence is limited and the change in the convergence angle is small, unstable, and non-uniform. These results are different from those of other patients (MID) and OPCA) or healthy controls and suggest a disturbance of stereopsis in the parietal lobe where AD patients typically have dysfunctions.

Nojima and Fujita have found a universal relation, irrespective of temperatures T, between the reduced field hH/Hir(T) and the reduced quantity of magnetization hysteresis mΔM (T, H)/ΔM (T, H0), where Hir is the irreversibility field and ΔM(T, H) is the hysteresis of magnetization for YBa2Cu3Ox and Bi2Sr2CaCu2Ox films. We could explain this universal relation based on a scaling theory in a three-dimensional superconducting vortex-glass phase. The exponent ν derived by this relation coincides with that obtained by nonlinear I-V characteristics for YBa2Cu3Ox films.

This paper describes the dependence of the delay time of a CMOS/SIMOX inverter on the gate-overlap capacitance. An analytical delay-time equation for the CMOS/SIMOX inverter, which includes the gate-overlap capacitance, is derived. This equation shows that the feed-forward effect dominates the characteristics of inverters with a small fanout. The validity of the delay-time equation is confirmed by the comparison to experimental measurements of 0.4-µm CMOS/SIMOX devices. Moreover, a sensitivity analysis shows that it is very important to reduce the gate-drain overlap capacitance for fabricating high-speed scaled-down CMOS/SIMOX devices.

A YBCO/CeO2/Au MIS structure (YBCO:YBa2Cu3O7y) is fabricated on a MgO(100) substrate with the help of the all-in-situ electron-beam and heater coevaperation system. The current-voltage (I-V) characteristics of the deposited YBCO film under various gate voltages are examined. Small modulation of the I-V characteristics by gate voltages can be observed. Meanwhile, the surface morphology is also studied by means of an atomic force microscope (AFM). The relation between the field effect and the surface morphology of a thin YBCO film is discussed.

In order to explain the temperature and frequency characteristics of high-Tc superconductors, a new model is proposed, which will be called the improved three-fluid model, where the momentum relaxation time τ is assumed to depend on temperature in the superconducting and normal states, respectively, although τ has been assumed to be independent of temperature for the conventional three-fluid model. According to this model, the complex conductivity σ1jσ2 and the surface impedance ZsRsjXs, where Rs is the surface resistance and Xs is the surface reactance, are expressed as a function of temperature. The temperature dependences of Zs and for a YBCO bulk estimated using this model agree very well with ones measured by the dielectric-loaded cavity method in room to cryogenic temperature. In particular, a peak of σ1 observed just below the critical temperature Tc in experiments, appeared in the calculated results based on this model. This phenomenon has been already known in the BCS theory. Thus, it is verified that this model is useful to explain the microwave characteristics of high-Tc superconductors in room to cryogenic temperature. On the other hand, the residual normal electron density nres4.2541023 m-3 and the total electron density nt7.3081024 m-3 are obtained by calculation. The ratio nres/nt0.058 can be used as figure of merit to evaluate material quality of high-Tc superconductors; thus it means that there is 5.8% nonpairing electron in this YBCO bulk.

Indoor radio communications is an important component of the emerging personal communication systems service. It is also the basis for wireless local area networks. The indoor radio channel is characterized by fading multipaths as well as noise. Direct sequence spread spectrum (DSSS), with its inherent resistance to multipath interference is an attractive technique for this environment. To allow multiple users within the limited bandwidths available, code division multiple access is needed. This paper analyzes the performance of a DSSS scheme employing random orthogonal codes over fading multipath indoor radio channels using actual channel measurements from five different locations. A RAKE receiver is used to study the effects of power control, code length and receiver structure. The average probability of error as a function of signal-to-noise ratio or as a function of the number of simultaneous transmitters is used as the performance criteria.

This paper describes an adaptive sensing system with tracking and zooming a moving object in the stable environment. Both the close contour matching technique and the effective determination of zoom ratio by fuzzy control are proposed for achieving the sensing system. First, the estimation of object feature parameters, 2-dimensional velocity and size, is based on close contour matching. The correspondence problem is solved with cross-correlation in projections extracted from object contours in the specialized difference images. In the stable environment, these contours matching, capable of eliminating occluded contours or random noises as well as background, works well without heavy-cost optical flow calculation. Next, in order to zoom the tracked object in accordance with the state of its shape or movement practically, fuzzy control is approached first. Three sets of input membership function--the confidence of object shape, the variance of object velocity, and the object size--are evaluated with the simplified implementation. The optimal focal length is achieved of not only desired size but safe tracking in combination with fuzzy rule matrix constituted of membership functions. Experimental results show that the proposed system is robust and valid for numerous kind of moving object in real scene with system period 1.85 sec.

This paper describes a neural network scheduler for scheduling independent and nonpreemptable tasks with deadlines and resource requirements in critical real-time applications, in which a schedule is to be obtained within a short time span. The proposed neural network scheduler is an integrate model of two Hopfield-Tank neural network medels. To cope with deadlines, a heuristic policy which is modified from the earliest deadling policy is embodied into the proposed model. Computer simulations show that the proposed neural network scheduler has a promising performance, with regard to the probability of generating a feasible schedule, compared with a scheduler that executes a conventional algorithm performing the earliest deadline policy.

The physical system is considered more suitable for measurement purposes the greater is its linearity. However, in nature and engineering there are no purely linear physical transducing systems for convertion a primary onformation. The use of the linear features of the system in the measurement process finally causes the drawbacks: systematic error due to nonlinear distortions, low ratio informative signal/ noise, the necessity to evaluate a great number of the a priori parameters of the transducer in order to receive an absolute result, low thermostability because every a priori parameter itself has a temperature dependence. To exclude these drawbacks a method has been developed using nonlinear physical systems in the base of the displacements measurement. In this work is presented the realization of the method using electretic and electrostatic transducer as a converting physical system. A contactless transducer is placed parallelly to the surface of the object which displacements are measured. The transducer is driven to harmonic oscillations. Typical time intervals between even and odd extremums of the transducer output signal are measured. The object displacements are determined according to the changes of the typical time intervals. The method itself has no errors because approximations were not made while deriving the relations. The source of the errors is inaccurate registration of the start and the end of the typical time intervals. In the work are analysed the errors related to the concrete realization devices: analogue differentiator, peak detector and analog digital transducer. It is shown that the measurement is possible only if the physical system is nonlinear. The method is generalized to that case if the function of transformation of ths system has the form f(x) and monotonous character. The results of experimental investigations confirm the theoretical conclusions.

In this paper we determine the performance of a direct sequence spread spectrum multiple access system where the users utilize different carrier frequencies. This scheme is applicable to a system, such as an indoor wireless communication system utilizing very high frequencies, where the available bandwidth is so large that it is not feasible to spread the signal over the whole band. The multi-user interference is modeled as a compound Gaussian random variable and expressions are found for the variance of the interference as a function of relative phase and frequency parameters. In addition to different carrier frequencies the analysis also accounts for offsets in the chip clock frequencies, general chip pulse shaping function, and different received signal powers. We give results for the error probability in a multiple access system utilizing BPSK, QPSK, and OQPSK modulation.

The well known optimum approach to detect spread spectrum signals transmitted in bursts over frequency selective radio channels is matched filtering, which performs despreading, and subsequent Viterbi equalization (VE) to cope with intersymbol interference (ISI). With respect to complexity, VE is feasible only if data modulation schemes with a few symbol levels as e.g. 2PSK are used and if the delay spread of the channel is not too large. The paper gives a survey of suboptimum data detectors based on linear block estimation. Such data detectors are less expensive than VE especially in the case of multilevel data modulation schemes as 4PSK or 16QAM. Special emphasis is laid on data detectors based on Gauss-Markoff estimation because these detectors combine the advantages of unbiasedness and minimum variance of the estimate. In computer simulations, the Gauss-Markoff estimation algorithm is applied to spread spectrum burst transmission over radio channels specified by COST 207. It is shown that the SNR degradation which is a measure of the suboptimality of the detector does not exceed a few dB, and that even moderate spectrum spreading considerably reduces the detrimental effect of channel frequency selectivity.

Amorphous films of YBCO and BSCCO (2212) sputtered on MgO substrate were crystallized using zonemelt technique. For YBCO films, thin Ag intermediate layer was found to be effective in enhancing crystal growth and preferred orientation. Zone-melted BSCCO films included both (2201) phase and Cu(Sr, Ca)O2 in a form of dendritic crystallites. Tc's obtained for YBCO and BSCCO films were 70 and 75 K, respectively.

It is concluded from numerical examples for the well-known linear PN sequence families of a large range of periods that the mean-square cross-correlation value between sequences is the dominating parameter to the average signal-to-noise power ratio performance of an asynchronous direct-sequence (DS) code-division multiple-access (CDMA) system. The performance parameters derived by Pursley and Sarwate are used for numerical evaluation and the validity of conclusion is supported by reviewing the other related works. The mean-square periodic cross-correlation takes the equal value p (code period) for the known CDMA code families. The equal mean-square cross-correlation performance results from the basic results of coding theory.

In this paper, we propose an adaptive RAKE receiver, which does not need to send the sounding signals and can track the fluctuations caused by fading. The channel estimation can be done by using a least squares method of the first and second equations suppressing additive noise and tracking the channel fluctuations. It is confirmed by computer simulations that the result has good agreement with theory and the performance is almost same as that of the conventional RAKE with the sounding signals.

Structure and resistivity of BaBiOy were compared with those of Ba1-xLaxBiO3. Decrease in an average Bi valence from 3.91 to 3.03 for BaBiOy leads to an increase in the lattice parameter c from 4.37 to 4.53 , in the unit cell volume from 81 3 to 87 3, and in the resistivity from 10 Ωcm to 2105 Ωcm. It was found that the increase in the unit cell volume and the resistivity was due to change in the average Bi valence. The resistivity of BaBi1-xLaxO3 was compared with that of BaBiOy and Ba1-xLaxBiO3. We also found that pseudocubic Ba1-xLaxBiO3 remains semiconducting as well as pseudotetragonal BaBiOy. The high resistivity in the Ba1-xLaxBiO3 and the BaBi1-xLaxO3 will be useful to the application for the SIS junction.