In stepped FM radar, the transmitter intermittently transmits narrowband pulse trains of frequencies that are incremented in steps, and the receiver performs phase detection on each pulse and applies the inverse discrete Fourier transform (IDFT) to create ultra-short pulses in the time domain. Furthermore, since the transmitted signal consists of a narrowband pulse train of different frequencies, the transmitter can avoid arbitrary frequency bands while sending the pulse train (spectrum holes), allowing these systems to coexist with other narrowband wireless systems. However, spectrum holes cause degradation in the distance resolution and range sidelobe characteristics of wireless systems. In this paper, we propose a spectrum hole compensation method for stepped FM radars using Khatri-Rao product extended-phase processing to overcome the problem of spectrum holes and investigate the effectiveness of this method through experiments. Additionally, we demonstrate that the proposed method dramatically improves the range sidelobe and distance resolution characteristics.

In this paper, we propose a simple algorithm for detecting a vehicle trapped in flooded urban area by using quad-polarimetric SAR data. The four-component scattering power decomposition and phase difference of HH-VV co-pol ratio are effectively used in the proposed algorithm. Here we carry out polarimetric scattering measurement for a scaled vehicle model surrounded by two buildings model in an anechoic chamber, to acquire the quad-polarimetric SAR data. It is confirmed from the results of the image analysis for the measured SAR data that the proposed algorithm for vehicle detection works well even under severe environment where the vehicle is set in the shadow of the building and/or the alignment of the vehicle or the buildings is obliquely oriented to direction of the radar line of sight.

Depth image based rendering (DIBR), which is utilized to render virtual views with a color image and the corresponding depth map, is one of the key procedures in the 2D to 3D conversion process. However, some troubling problems, such as depth edge misalignment, disocclusion occurrences and cracks at resampling, still exist in current DIBR systems. To solve these problems, in this paper, we present a robust depth image based rendering scheme for stereoscopic view synthesis. The cores of the proposed scheme are two depth map filters which share a common domain transform based filtering framework. As a first step, a filter of this framework is carried out to realize texture-depth boundary alignments and directional disocclusion reduction smoothing simultaneously. Then after depth map 3D warping, another adaptive filter is used on the warped depth maps with delivered scene gradient structures to further diminish the remaining cracks and noises. Finally, with the optimized depth map of the virtual view, backward texture warping is adopted to retrieve the final texture virtual view. The proposed scheme enables to yield visually satisfactory results for high quality 2D to 3D conversion. Experimental results demonstrate the excellent performances of the proposed approach.

Fully integrated CMOS power amplifiers (PAs) with a two-winding and single-winding combined transformer (TS transformer) are presented. The general analysis of the TS transformer and other power-combining transformers, i.e., the series-combining transformer and parallel-combining transformer, is presented in terms of the transformer design parameters. Compared with other power-combining transformers, the proposed power-combining TS transformer offers high-efficiency with a compact form factor. In addition, a fully integrated CMOS PA using the TS transformer with multi-gated transistors (MGTRs) and adaptive bias circuit has been proposed to improve linearity. The proposed PAs are implemented using 65-nm CMOS technology. The implemented PA with the TS transformer achieves a saturated output power of 26.7 dBm with drain efficiency (DE) of 47.7%. The PA achieves 20.13-dBm output power with 21.4% DE while satisfying the -25-dB error vector magnitude (EVM) requirement when tested with the WLAN 802.11g signal. The implemented PA using the TS transformer with MGTRs and adaptive bias circuit achieves the -30-dB EVM requirement up to an output power of 17.13 dBm with 10.43% DE when tested using the WLAN 802.11ac signal.

We analyze the behaviors of the FXLMS algorithm using a statistical-mechanical method. The cross-correlation between a primary path and an adaptive filter and the autocorrelation of the adaptive filter are treated as macroscopic variables. We obtain simultaneous differential equations that describe the dynamical behaviors of the macroscopic variables under the condition that the tapped-delay line is sufficiently long. The obtained equations are deterministic and closed-form. We analytically solve the equations to obtain the correlations and finally compute the mean-square error. The obtained theory can quantitatively predict the behaviors of computer simulations including the cases of both not only white but also nonwhite reference signals. The theory also gives the upper limit of the step size in the FXLMS algorithm.

We propose a new context-adaptive arithmetic coding (CAAC) scheme for lossless bit rate reduction of parametric stereo (PS) in enhanced aacPlus. Based on the probability analysis of stereo parameters indexes in PS, we propose a stereo band-dependent CAAC scheme for PS. We also propose a new coding structure of the scheme which is simple but effective. The proposed scheme has normal and memory-reduced versions, which are superior to the original and conventional schemes and guarantees significant bit rate reduction of PS. The proposed scheme can be an alternative to the original PS coding scheme at low bit rate, where coding efficiency is very important.

We propose waveguide to microstrip line transitions for automotive millimeter wave radar modules. The transitions perpendicularly connect one waveguide and one or two microstrip lines. The configuration is simple because it consists of a waveguide and a dielectric substrate with copper foils. Additionally the transitions do not need via holes on the substrate. It leads to lower costs and improved reliability. We have already proposed a via-less transition by using multi-stage impedance transformers. The impedance transformers are used for suppressing undesirable radiation from the transition as well as impedance matching. In this paper, we propose a new transition with the microstrip lines on the long axis of the waveguide while most transitions place the microstrip lines on the minor axis (electric field direction) of the waveguide. Though our transition uses bend structures of microstrip lines, which basically cause radiation, our optimized configuration can keep small radiation. We also design a transition with a single microstrip line. The proposed transition with 2 microstrip lines can be modified to the 1 microstrip line version with minimum radiation loss. Electromagnetic simulations confirm the small radiation levels expected. Additionally we fabricate the transitions with back to back structure and determine the transmission and radiation performance. We also fabricates the transition for a patch array antenna. We confirm that the undesirable radiation from the proposed transition is small and the radiation pattern of the array antenna is not worsen by the transition.

Video streaming over HTTP/2 is a new trend in multimedia delivery. Compared to the pull-based HTTP/1.1 protocol, the new HTTP/2 protocol's Server Push feature is very effective in reducing the overheads (e.g., in terms of energy, processing, bandwidth) for clients, servers, and network nodes. This paper presents an HTTP/2 push-based adaptation method for on-demand video streaming that reduces the number of requests and provides high video quality. In our method, for each client request, the server sends video segments continuously until it receives another client request with a new quality. Since a request is sent only if the client wants to update the video bitrate, our method can significantly reduce the request related overhead. For this context, a buffer based algorithm is proposed to provide high and smooth video quality while avoiding buffer underflows. Experiments show that the proposed method can provide a lower number of requests, higher average quality and better quality smoothness than existing methods.

Most state-of-the-art discriminative tracking approaches are based on either template appearance models or statistical appearance models. Despite template appearance models have shown excellent performance, they perform poorly when the target appearance changes rapidly. In contrast, statistic appearance models are insensitive to fast target state changes, but they yield inferior tracking results in challenging scenarios such as illumination variations and background clutters. In this paper, we propose an adaptive object tracking approach with complementary models based on template and statistical appearance models. Both of these models are unified via our novel combination strategy. In addition, we introduce an efficient update scheme to improve the performance of our approach. Experimental results demonstrate that our approach achieves superior performance at speeds that far exceed the frame-rate requirement on recent tracking benchmarks.

Nyquist folding receiver (NYFR) is a novel reconnaissance receiving architecture and it can realize wideband receiving with small amount of equipment. As a tradeoff of non-cooperative wideband receiving, the NYFR output will add an unknown key parameter that is called Nyquist zone (NZ) index. In this letter, we concentrate on the NZ index estimation of the NYFR output. Focusing on the basic pulse radar signals, the constant frequency signal, the binary phase coded signal and the linear frequency modulation signal are considered. The matching component function is proposed to estimate the NZ indexes of the NYFR outputs without the prior information of the signal modulation type. In addition, the relations between the matching component function and the parameters of the NYFR are discussed. Simulation results demonstrate the efficacy of the proposed method.

Adaptive noise cancellation using adaptive filters is a known method for removing noise that interferes with signal measurements. The adaptive noise canceller performs filtering based on the current situation through a windowing process. The shape of the window function determines the tracking performance of the adaptive noise canceller with respect to the fluctuation of the property of the unknown system that noise (reference signal) passes. However, the shape of the window function in the field of adaptive filtering has not yet been considered in detail. This study mathematically treats the effect of the window function on the adaptive noise canceller and proposes an optimization method for the window function in situations where offline processing can be performed, such as biomedical signal measurements. We also demonstrate the validity of the optimized window function through numerical experiments.

To improve detection performance for a reconnaissance receiver, which is designed to detect the non-cooperative MIMO-LFM radar signal under low SNR condition, this letter proposed a novel signal detection method. This method is based on Fractional Fourier Transform with entropy weight (FRFTE) and autocorrelation algorithm. In addition, the flow chart and feasibility of the proposed algorithm are analyzed. Finally, applying our method to Wigner Hough Transform (WHT), we demonstrate the superiority of this method by simulation results.

Peer code review is key to ensuring the absence of software defects. To reduce review costs, software developers adopt code convention checking tools that automatically identify maintainability issues in source code. However, these tools do not always address the maintainability issue for a particular project. The goal of this study is to understand how code review fixes conditional statement issues, which are the most frequent changes in software development. We conduct an empirical study to understand if-statement changes through code review. Using review requests in the Qt and OpenStack projects, we analyze changes of the if-conditional statements that are (1) requested to be reviewed, and are (2) revised through code review. We find the most frequently changed symbols are “( )”, “.”, and “!”. We also find project-specific fixing patterns for improving code readability by association rule mining. For example “!” operator is frequently replaced with a function call. These rules are useful for improving a coding convention checker tailored for the projects.

Dual-motor driving servo systems are widely used in many military and civil fields. Since backlash nonlinearity affects the dynamic performance and steady-state tracking accuracy of these systems, it is necessary to study a control strategy to reduce its adverse effects. We first establish the state-space model of a system. To facilitate the design of the controller, we simplify the model based on the state-space model. Then, we design an adaptive controller combining a projection algorithm with dynamic surface control applied to a dual-motor driving servo system, which we believe to be the first, and analyze its stability. Simulation results show that projection algorithm-based dynamic surface control has smaller tracking error, faster tracking speed, and better robustness and stability than mere dynamic surface control. Finally, the experimental analysis validates the effectiveness of the proposed control algorithm.

This letter proposes a track before detect scheme embedded in coherent repeated interference with the aid of frequency diversity array. The unmatched properties between echo and interferences are firstly discussed from both signal processing and data processing standpoints. Afterward, the interference suppression algorithm with virtual channel weighting at continue sampling stage is proposed, followed with kinematics constraint correspondingly. Further, the evaluations of the interference suppression performance are carried out through simulations which illustrate the feasibility and validity of the proposed algorithm.

To track the players and shuttlecock in broadcast badminton video is a challenge, especially for tracking the small size and fast moving shuttlecock. There are many situations that may cause occlusion or misdetection. In this paper, a method is proposed to track players and shuttlecock in broadcast badminton videos. We apply adaptive Kalman filter, trajectory confidence estimation and confidence-update (Location Similarity and Relative Motion Relation, RMR) to improve the accuracy of object trajectories. In our experiments, the proposed method significantly enhance the tracking success rate of players and shuttlecock.

Job scheduling on many-core computers with tens or even hundreds of processing cores is one of the key technologies in High Performance Computing (HPC) systems. Despite many scheduling algorithms have been proposed, scheduling remains a challenge for executing highly effective jobs that are assigned in a single computing node with diverse scheduling objectives. On the other hand, the increasing scale and the need for rapid response to changing requirements are hard to meet with existing scheduling models in an HPC node. To address these issues, we propose a novel adaptive scheduling model that is applied to a single node with a many-core processor; this model solves the problems of scheduling efficiency and scalability through an adaptive optimistic control mechanism. This mechanism exposes information such that all the cores are provided with jobs and the tools necessary to take advantage of that information and thus compete for resources in an uncoordinated manner. At the same time, the mechanism is equipped with adaptive control, allowing it to adjust the number of running tools dynamically when frequent conflict happens. We justify this scheduling model and present the simulation results for synthetic and real-world HPC workloads, in which we compare our proposed model with two widely used scheduling models, i.e. multi-path monolithic and two-level scheduling. The proposed approach outperforms the other models in scheduling efficiency and scalability. Our results demonstrate that the adaptive optimistic control affords significant improvements for HPC workloads in the parallelism of the node-level scheduling model and performance.

This letter addresses the problem of space-time adaptive processing (STAP) for airborne nonuniform linear array (NLA) radar using a generalized sidelobe canceller (GSC). Due to the difficulty of determining the spatial nulls for the NLAs, it is a problem to obtain a valid blocking matrix (BM) of the GSC directly. In order to solve this problem and improve the STAP performance, a BM modification method based on the modified Gram-Schmidt orthogonalization algorithm is proposed. The modified GSC processor can achieve the optimal STAP performance and as well a faster convergence rate than the orthogonal subspace projection method. Numerical simulations validate the effectiveness of the proposed methods.

High Efficiency Video Coding (HEVC) has a better coding efficiency comparing with H.264/AVC. However, performance enhancement results in increased computational complexity which is mainly brought by the quadtree based coding tree unit (CTU). In this paper, an early termination algorithm based on AdaBoost classifier for coding unit (CU) is proposed to accelerate the process of searching the best partition for CTU. Experiment results indicate that our method can save 39% computational complexity on average at the cost of increasing Bjontegaard-Delta rate (BD-rate) by 0.18.

The step size is a parameter of fundamental importance in learning algorithms, particularly for the natural policy gradient (NPG) methods. We derive an upper bound for the step size in an incremental NPG estimation, and propose an adaptive step size to implement the derived upper bound. The proposed adaptive step size guarantees that an updated parameter does not overshoot the target, which is achieved by weighting the learning samples according to their relative importances. We also provide tight upper and lower bounds for the step size, though they are not suitable for the incremental learning. We confirm the usefulness of the proposed step size using the classical benchmarks. To the best of our knowledge, this is the first adaptive step size method for NPG estimation.