In this paper, we propose an efficient method for computing the weight spectrum of LDPC convolutional codes based on circulant matrices of quasi-cyclic codes. In the proposed method, we reduce the memory size of their parity-check matrices with the same distance profile as the original codes, and apply a forward and backward tree search algorithm to the parity-check matrices of reduced memory. We show numerical results of computing the free distance and the low-part weight spectrum of LDPC convolutional codes of memory about 130.

We propose a cyclic sleep control technique for backup resources in reconfigurable optical add/drop multiplexer (ROADM) systems to simultaneously achieve power savings and high-speed recovery from failures. Processes to check the reliability of backup resources, backup transponders and paths, are also provided in the control technique. The proposed technique uses sleep mode where backup transponders are powered down to minimize power for power savings. At least one of the backup transponders is always activated after self-checking using the loopback fiber connection in the ROADM and it becomes a shared backup for working transponders to enable high-speed recovery from failures. This activated backup transponder is powered down again after the next transponder is activated. These state transitions are cyclically applied to each backup transponder. This “cyclic” aspect of operation enables network operators to continuously monitor the reliability for all backup resources with the sleep mode. The activated backup transponders at both ends of the path are used in checking the reliability of backup paths. Therefore, all backup resources, both transponders and paths, can be regularly checked with the sleep mode to ensure data are stably forwarded. We estimated the power consumption with this technique under various conditions and found a trade-off between power reduction and the recovery capabilities from failures. We achieved more than 34% power saving of backup transponders maintaining the failure recovery time within 50ms in experiments. Furthermore, we confirmed the reliability of backup paths in experiments using backup transponders with the cyclic sleep control technique. These results indicated that the proposed control technique is promising in dramatically and reliably reducing the power consumption of backup resources.

We propose TagFlow, a data plane mechanism for classification in Software-Defined Networking (SDN). We first argue that simple field-matching proposals of current SDN APIs are not efficient and flexible enough and then propose a tag based classification mechanism as an alternative. Moreover, we propose user-defined actions as an improvement over current hardcoded actions in SDN APIs. Our experiments show TagFlow forwarding is almost 40% faster than OpenFlow. Furthermore, our user-defined actions at SDN southbound are thousands of times faster that equivalent northbound implementations in the literature.

The traffic load of cellular networks varies in both time and spatial domains, causing many base stations (BS) to be under-utilized. Assisted by cell zooming, dynamic BS sleep control is considered as an effective way to improve energy efficiency during low traffic hours. Therefore, how densely the BSs should be deployed with cell zooming and BS sleeping is an important issue. In this paper, we explore the energy-optimal cellular network planning problem with dynamic BS sleeping and cell zooming for the cases in which traffic is uniformly distributed in space but time-varying. To guarantee the quality of multi-class services, an approximation method based on Erlang formula is proposed. Extensive simulations under our predefined scenarios show that about half of energy consumption can be saved through dynamic BS sleeping and power control. Surprisingly, the energy-optimal BS density we obtained is larger than the one without considering BS sleeping. In other words, deploying more BSs may help to save energy if dynamic BS sleeping is executed.

Dysarthric speech results from damage to the central nervous system involving the articulator, which can mainly be characterized by poor articulation due to irregular sub-glottal pressure, loudness bursts, phoneme elongation, and unexpected pauses during utterances. Since dysarthric speakers have physical disabilities due to the impairment of their nervous system, they cannot easily control electronic devices. For this reason, automatic speech recognition (ASR) can be a convenient interface for dysarthric speakers to control electronic devices. However, the performance of dysarthric ASR severely degrades when there is background noise. Thus, in this paper, we propose a noise reduction method that improves the performance of dysarthric ASR. The proposed method selectively applies either a Wiener filtering algorithm or a Kalman filtering algorithm according to the result of voiced or unvoiced classification. Then, the performance of the proposed method is compared to a conventional Wiener filtering method in terms of ASR accuracy.

This study investigated the distribution of attention to frontal space in augmented reality (AR). We conducted two experiments to compare binocular and monocular observation when an AR image was presented. According to a previous study, when participants observed an AR image in monocular presentation, they perceived the AR image as more distant than in binocular vision. Therefore, we predicted that attention would need to be shifted between the AR image and the background in not the monocular observation but the binocular one. This would enable an observer to distribute his/her visual attention across a wider space in the monocular observation. In the experiments, participants performed two tasks concurrently to measure the size of the useful field of view (UFOV). One task was letter/number discrimination in which an AR image was presented in the central field of view (the central task). The other task was luminance change detection in which dots were presented in the peripheral field of view (the peripheral task). Depth difference existed between the AR image and the location of the peripheral task in Experiment 1 but not in Experiment 2. The results of Experiment 1 indicated that the UFOV became wider in the monocular observation than in the binocular observation. In Experiment 2, the size of the UFOV in the monocular observation was equivalent to that in the binocular observation. It becomes difficult for a participant to observe the stimuli on the background in the binocular observation when there is depth difference between the AR image and the background. These results indicate that the monocular presentation in AR is superior to binocular presentation, and even in the best condition for the binocular condition the monocular presentation is equivalent to the binocular presentation in terms of the UFOV.

In 3GPP (3-rd Generation Partnership Project) LTE (Long Term Evolution) systems, D2D (Device-to-Device) communication has been selected as a next generation study item. In uplink D2D communication that underlies LTE systems, uplink interference signals generated by CUE (Cellular User Equipment) have a profound impact on the throughput of DUE (D2D User Equipment). For that reason, various resource allocation algorithms which consider interference channels have been studied; however, these algorithms assume accurate channel estimation and feedback of D2D related links. Therefore, in order to estimate uplink channels of D2D communication, SRS (Sounding Reference Signal) defined in LTE uplink channel structure can be considered. However, when the number of interferes increases, the SRS based method incurs significant overheads such as side information, operational complexity, channel estimation and feedback to UE. Therefore, in this paper, we propose an efficient channel estimation and CSI (Channel State Information) feedback method for D2D communication, and its application in LTE systems. We verify that the proposed method can achieve a similar performance to SRS based method with lower operational complexity and overhead.

Internet traffic classification is an essential step for stable service provision. The payload signature classifier is considered a reliable method for Internet traffic classification but is prohibitively computationally expensive for real-time handling of large amounts of traffic on high-speed networks. In this paper, we describe several design techniques to minimize the search space of traffic classification and improve the processing speed of the payload signature classifier. Our suggestions are (1) selective matching algorithms based on signature type, (2) signature reorganization using hierarchical structure and traffic locality, and (3) early packet sampling in flow. Each can be applied individually, or in any combination in sequence. The feasibility of our selections is proved via experimental evaluation on traffic traces of our campus and a commercial ISP. We observe 2 to 5 times improvement in processing speed against the untuned classification system and Snort Engine, while maintaining the same level of accuracy.

In this paper, we propose a modified-error adaptive feedback active noise control (ANC) system using a linear prediction filter. The proposed ANC system is advantageous in terms of the rate of convergence, while maintaining stability, because it can reduce narrowband noise while suppressing disturbance, including wideband components. The estimation accuracy of the noise control filter in the conventional system is degraded because the disturbance corrupts the input signal to the noise control filter. A solution of this problem is to utilize a linear prediction filter. The linear prediction filter is utilized for the modified-error feedback ANC system to suppress the wideband disturbance because the linear prediction filter can separate narrowband and wideband noise. Suppressing wideband noise is important for the head-mounted ANC system we have already proposed for reducing the noise from a magnetic resonance imaging (MRI) device because the error microphones are located near the user's ears and the user's voice consequently corrupts the input signal to the noise control filter. Some simulation and experimental results obtained using a digital signal processor (DSP) demonstrate that the proposed feedback ANC system is superior to a conventional feedback ANC system in terms of the estimation accuracy and the rate of convergence of the noise control filter.

This paper proposes a noise reduction method for impact noise with damped oscillation caused by clinking a glass, hitting a bottle, and so on. The proposed method is based on the zero phase (ZP) signal defined as the IDFT of the spectral amplitude. When the target noise can be modeled as the sum of the impact part and the damped oscillation part, the proposed method can reduce them individually. First, the proposed method estimates the damped oscillation spectra and subtracts them from the observed spectra. Then, the impact part is reduced by replacing several samples of the ZP observed signal. Simulation results show that the proposed method improved 10dB of SNR of real impact noise.

Multi-user MIMO (MU-MIMO) improves the system channel capacity by employing the transmission between a base station and multiple user terminals (UTs). Block Diagonalization (BD) has been proposed in order to realize MU-MIMO broadcast transmission. The BD algorithm cancels inter-user interference by creating the weights so that the channel matrixes for the other users are set to be zero matrixes. However, when the number of transmit antennas is equals to the total number of received antennas, the transmission rate by the BD algorithm is decreased. This paper proposes a new antenna selection method at the UTs to reduce the number of nulls for the other users except an intended user by the BD algorithm. It is verified via bit error rate (BER) evaluation that the proposed method is effective compared to the conventional BD algorithm, especially, when the number of users is increased with a low bit rate. Moreover, this paper evaluates the transmission rate based on IEEE802.11ac standard when considering BD algorithm with ideal user scheduling. Although the number of equivalent receive antenna is only one by the proposed method when the number of antennas at the the UT is two, it is shown that the transmission rate by the proposed method is higher than that by the conventional BD algorithm when the SNR is low even in the condition on user scheduling.

Realization of a planar dual-band fork three-way power divider (PDBF3PD) with Cheng's equivalent structure is discussed. The Cheng's structure consists of two open-circuited stubs and a transmission line, and the characteristic impedances tend to be high. As a result, the realizable range of frequency ratios of upper frequency to lower frequency is limited in a narrow area. In this paper, an impedance scale factor is proposed to transform characteristic impedances into a realizable range and to facilitate the design of PDBF3PDs. Theoretical considerations are verified using a simulator of ADS2008U and by an experiment.

We construct two types of reverberation chambers, one is 4(m) × 2(m) × 2(m)-sized and the other is 2(m) × 2(m) × 2(m)-sized for realizing a multipath-rich environment for MIMO-OTA measurements. In this paper, we measure fundamental propagation characteristics, including amplitude statistics, multipath-delay statistics, spatial correlation characteristics, and cross polarization characteristics over a frequency range of 800MHz to 5GHz in our reverberation chamber. Also, we confirm the existence of spatially uniform area of 1m2 area, which might be sufficiently large to set a device under test (DUT) in the chamber. Theoretical considerations about the characteristics are also given to support the design of reverberation chamber.

Runtime analysis is to enhance the safety of critical systems by monitoring the change of corresponding external environments. In this paper, a modified FTA approach, making full utilization of the existing safety analysis result, is put forward to achieve runtime safety analysis. The procedures of the approach are given in detail. This approach could be widely used in safety engineering of critical systems.

This paper proposes a compact three-mode H-shaped resonator bandpass filter fed by antiparallel coupled input/output lines. To investigate the resonant behavior of the H-shaped resonator, even/odd-mode resonance conditions of the resonator are first derived analytically. The multimode resonances of the H-shaped resonator filter are modeled by a multipath circuit formed with resonance paths. Moreover, a direct source/load coupling path is connected in parallel, of which the value shows a frequency dependency because of the antiparallel coupled feeding lines, thereby generating four transmission zeros (TZs) greater than the number of a theoretical limitation. The H-shaped resonator bandpass filter is synthesized, developed, and tested, showing a third-order passband response with four TZs located near the passband, and a wide stopband property.

The applicability of at-speed scan-based logic built-in self-test (BIST) is being severely challenged by excessive capture power that may cause erroneous test responses even for good circuits. Different from conventional low-power BIST, this paper is the first to explicitly focus on achieving capture power safety with a novel and practical scheme, called capture-power-safe logic BIST (CPS-LBIST). The basic idea is to identify all possibly-erroneous test responses caused by excessive capture power and use the well-known approach of masking (bit-masking, slice-masking,vector-masking) to block them from reaching the multiple-input signature register(MISR). Experiments with large benchmark circuits and a large industrial circuit demonstrate that CPS-LBIST can achieve capture power safety with negligible impact on test quality and circuit overhead.

We propose a new algorithm to suppress both stationary background noise and nonstationary directional interference noise in a speech enhancement system that employs the generalized sidelobe canceller. Our approach builds on advances in generalized sidelobe canceller design involving the transfer function ratio. Our system is composed of three stages. The first stage estimates the transfer function ratio on the acoustic path, from the nonstationary directional interference noise source to the microphones, and the powers of the stationary background noise components. Secondly, the estimated powers of the stationary background noise components are used to execute spectral subtraction with respect to input signals. Finally, the estimated transfer function ratio is used for speech enhancement on the primary channel, and an adaptive filter reduces the residual correlated noise components of the signal. These algorithmic improvements give consistently better performance than the transfer function generalized sidelobe canceller when input signal-to-noise ratio is 10 dB or lower.

A new theorem is proposed on BIBO (Bounded Input Bounded Output) stability of a general feedback amplifier circuit formulated by BIBO operators. The proposed theorem holds for both linear and nonlinear BIBO operators. The meaning of this theorem is clarified by applying it to continuous-time linear cases.

In this paper, we consider multi-source multi-relay power allocation in cooperative wireless networks. A new intelligent optimization algorithm, multi-objective free search (MOFS), is proposed to efficiently allocate cooperative relay power to better support multiple sources transmission. The existence of Pareto optimal solutions is analyzed for the proposed multi-objective power allocation model when the objectives conflict with each other, and the MOFS algorithm is validated using several test functions and metrics taken from the standard literature on evolutionary multi-objective optimization. Simulation results show that the proposed scheme can effectively get the potential optimal solutions of multi-objective power allocation problem, and it can effectively optimize the tradeoff between network sum-rate and fairness in different applications by selection of the corresponding solution.

This paper presents a mechanism for detecting dynamic loop and procedure nesting during the actual program execution on-the-fly. This mechanism aims primarily at making better strategies for performance tuning or parallelization. Using a pre-compiled application executable machine code as an input, our mechanism statically generates simple but precise markers that indicate loop entries and loop exits, and dynamically monitors loop nesting that appears during the actual execution together with call context tree. To keep precise loop structures all the time, we monitor the indirect jumps that enter the loop regions and the setjmp/longjmp functions that cause irregular function call transfers. We also present a novel representation called Loop-Call Context Graph that can keep track of inter-procedural loop nests. We implement our mechanism and evaluate it using SPEC CPU2006 benchmark suite. The results confirm that our mechanism can successfully reveal the precise inter-procedural loop nest structures from all of SPEC CPU2006 benchmark executions without any particular compiler support. The results also show that it can reduce runtime loop detection overheads compared with the existing loop profiling method.