There are demands for high-speed and stable ground-to-train optical communication as a network environment for trains. The existing ground-to-train optical communication system developed by the authors uses a camera and a QPD (Quadrant photo diode) to capture beacon light. The problem with the existing system is that it is impossible to identify the ground station. In the system proposed in this paper, a beacon light modulated with the ID of the ground station is transmitted, and the ground station is identified by demodulating the image from the dual-port camera on the opposite side. In this paper, we developed an actual system and conducted experiments using a car on the road. The results showed that only one packet was lost with the ping command every 1 ms near handover. Although the communication device itself has a bandwidth of 100 Mbps, the throughput before and after the handover was about 94 Mbps, and only dropped to about 89.4 Mbps during the handover.

A drone swarm is a robotic architecture having multiple drones cooperate to accomplish a mission. Nowadays, heterogeneous drone swarms, in which a small number of gateway drones (GWs) act as protocol translators to enable the mixing of multiple swarms that use independent wireless protocols, have attracted much attention from many researchers. Our previous work proposed Path Optimizer — a method to minimize the number of end-to-end path-hops in a remote video monitoring system using heterogeneous drone swarms by autonomously relocating GWs to create a shortcut in the network for each communication request. However, Path Optimizer has limitations in improving communication quality when more video sessions than the number of GWs are requested simultaneously. Path Coordinator, which we propose in this paper, achieves a uniform reduction in end-to-end hops and maximizes the allowable hop satisfaction rate regardless of the number of sessions by introducing the cooperative and synchronous relocation of all GWs. Path Coordinator consists of two phases: first, physical optimization is performed by geographically relocating all GWs (relocation phase), and then logical optimization is achieved by modifying the relaying GWs of each video flow (rerouting phase). Computer simulations reveal that Path Coordinator adapts to various environments and performs as well as we expected. Furthermore, its performance is comparable to the upper limits possible with brute-force search.

In recent years, physical layer security (PLS), which is based on information theory and whose strength does not depend on the eavesdropper's computing capability, has attracted much attention. We have proposed a chaos modulation method as one PLS method that offers channel coding gain. One alternative is based on polar codes. They are robust error-correcting codes, have a nested structure in the encoder, and the application of this mechanism to PLS encryption (PLS-polar) has been actively studied. However, most conventional studies assume the application of conventional linear modulation such as BPSK, do not use encryption modulation, and the channel coding gain in the modulation is not achieved. In this paper, we propose a PLS-polar method that can realize high-quality transmission and encryption of a modulated signal by applying chaos modulation to a polar-coding system. Numerical results show that the proposed method improves the performance compared to the conventional PLS-polar method by 0.7dB at a block error rate of 10-5. In addition, we show that the proposed method is superior to conventional chaos modulation concatenated with low-density parity-check codes, indicating that the polar code is more suitable for chaos modulation. Finally, it is demonstrated that the proposed method is secure in terms of information theoretical and computational security.

In this study, we discuss a structure that realizes a wideband polarization splitter comprising fiber 1 with a single core and fiber 2 with circular pits, which touch the top and bottom of a single core. The refractive index profile of the W type was adopted in the core of fiber 1 to realize the wideband. We compared the maximum bandwidth of BW-15 (bandwidth at an extinction ratio of -15dB) for the W type obtained in this study with those (our previous results) of BW-15 for the step and graded types with cores and pits at the same location; this comparison clarified that the maximum bandwidth of BW-15 for the W type is 5.22 and 4.96 times wider than those of step and graded types, respectively. Furthermore, the device length at the maximum bandwidth improved, becoming slightly shorter. The main results of the FPS in this study are all obtained by numerical analysis based on our proposed MM-DM (a method that combines the multipole method and the difference method for the inhomogeneous region). Our MM-DM is a quite reliable method for high accuracy analysis of the FPS composed of inhomogeneous circular regions.

An approach to dedicated computers is discussed in this study as a possibility for portable, low-cost, and low-power consumption high-performance computing technologies. Particularly, dataflow architecture dedicated computer of the finite integration technique (FIT) for 2D magnetostatic field simulation is considered for use in industrial applications. The dataflow architecture circuit of the BiCG-Stab matrix solver of the FIT matrix calculation is designed by the very high-speed integrated circuit hardware description language (VHDL). The operation of the dedicated computer's designed circuit is considered by VHDL logic circuit simulation.

In real world applications of multiclass classification models, misclassification in an important class (e.g., stop sign) can be significantly more harmful than in other classes (e.g., no parking). Thus, it is crucial to improve the recall of an important class while maintaining overall accuracy. For this problem, we found that improving the separation of important classes relative to other classes in the feature space is effective. Existing methods that give a class-sensitive penalty for cross-entropy loss do not improve the separation. Moreover, the methods designed to improve separations between all classes are unsuitable for our purpose because they do not consider the important classes. To achieve the separation, we propose a loss function that explicitly gives loss for the feature space, called class-sensitive additive angular margin (CAMRI) loss. CAMRI loss is expected to reduce the variance of an important class due to the addition of a penalty to the angle between the important class features and the corresponding weight vectors in the feature space. In addition, concentrating the penalty on only the important class hardly sacrifices separating the other classes. Experiments on CIFAR-10, GTSRB, and AwA2 showed that CAMRI loss could improve the recall of a specific class without sacrificing accuracy. In particular, compared with GTSRB's second-worst class recall when trained with cross-entropy loss, CAMRI loss improved recall by 9%.

We study a new transistor-level side-channel leakage caused by charges trapped in between stacked transistors namely residual electric charges (RECs). Building leakage models is important in designing countermeasures against side-channel attacks (SCAs). The conventional work showed that even a transistor-level leakage is measurable with a local electromagnetic measurement. One example is the current-path leak [1], [2]: an attacker can distinguish the number of transistors in the current path activated during a signal transition. Addressing this issue, Sugawara et al. proposed to use a mirror circuit that has the same number of transistors on its possible current paths. We show that this countermeasure is insufficient by showing a new transistor-level leakage, caused by RECs, not covered in the previous work. RECs can carry the history of the gate's state over multiple clock cycles and changes the gate's electrical behavior. We experimentally verify that RECs cause exploitable side-channel leakage. We also propose a countermeasure against REC leaks and designed advanced encryption standard-128 (AES-128) circuits using IO-masked dual-rail read-only memory with a 180-nm complementary metal-oxide-semiconductor (CMOS) process. We compared the resilience of our AES-128 circuits against EMA attacks with and without our countermeasure and investigated an RECs' effect on physically unclonable functions (PUFs). We further extend RECs to physically unclonable function. We demonstrate that RECs affect the performance of arbiter and ring-oscillator PUFs through experiments using our custom chips fabricated with 180- and 40-nm CMOS processes*.

The damage cost caused by malware has been increasing in the world. Usually, malwares are packed so that it is not detected. It is a hard task even for professional malware analysts to identify the packers especially when the malwares are multi-layer packed. In this letter, we propose a method to identify the packers for multi-layer packed malwares by using k-nearest neighbor algorithm with entropy-analysis for the malwares.

We propose a biometric identification system where the chosen- and generated-secret keys are used simultaneously, and investigate its fundamental limits from information theoretic perspectives. The system consists of two phases: enrollment and identification phases. In the enrollment phase, for each user, the encoder uses a secret key, which is chosen independently, and the biometric identifier to generate another secret key and a helper data. In the identification phase, observing the biometric sequence of the identified user, the decoder estimates index, chosen- and generated-secret keys of the identified user based on the helper data stored in the system database. In this study, the capacity region of such system is characterized. In the problem settings, we allow chosen- and generated-secret keys to be correlated. As a result, by permitting the correlation of the two secret keys, the sum rate of the identification, chosen- and generated-secret key rates can achieve a larger value compared to the case where the keys do not correlate. Moreover, the minimum amount of the storage rate changes in accordance with both the identification and chosen-secret key rates, but that of the privacy-leakage rate depends only on the identification rate.

An authentication code (A-code) is a two-party message authentication code in the information-theoretic security setting. One of the variants of A-codes is a multi-receiver authentication code (MRA-code), where there are a single sender and multiple receivers and the sender can create a single authenticator so that all receivers accepts it unless it is maliciously modified. In this paper, we introduce a multi-designated receiver authentication code (MDRA-code) with information-theoretic security as an extension of MRA-codes. The purpose of MDRA-codes is to securely transmit a message via a broadcast channel from a single sender to an arbitrary subset of multiple receivers that have been designated by the sender, and only the receivers in the subset (i.e., not all receivers) should accept the message if an adversary is absent. This paper proposes a model and security formalization of MDRA-codes, and provides constructions of MDRA-codes.

In a practical classification problem, there are cases where incorrect labels are included in training data due to label noise. We introduce a classification method in the presence of label noise that idealizes a classification method based on the expectation-maximization (EM) algorithm, and evaluate its performance theoretically. Its performance is asymptotically evaluated by assessing the risk function defined as the Kullback-Leibler divergence between predictive distribution and true distribution. The result of this performance evaluation enables a theoretical evaluation of the most successful performance that the EM-based classification method may achieve.

Cancellation of self interference (SI) is an important technology in order for wireless communication system devices to perform full-duplex communication. In this paper, we propose a novel self-interference cancellation using null beamforming to be applied entire IEEE 802.11 frame including the legacy part for full-duplex wireless communication on Cooperative MIMO (Multiple Input Multiple Output). We evaluate the SI cancellation amount by the proposed method using a field programmable gate array (FPGA) and software defined radio (SDR), and show the experimental results. In the experiment, it is confirmed that the amount of SI cancellation by the proposed method was at least 18dB. The SI cancellation amount can be further potentiated with more accurate CSI (channel state information) by increasing the transmission power. It is shown that SI can be suppressed whole frame which includes legacy preamble part. The proposed method can be applied to next generation wireless communication standards as well.

Backscatter communication is an emerging wireless access technology to realize ultra-low power terminals exploiting the modulated reflection of incident radio wave. This paper proposes a method to measure the phase angle of backscatter link using principal component analysis (PCA). The phase angle measurement of backscatter link at the receiver is essential to maximize the signal quality for subsequent demodulation and to measure the distance and the angle of arrival. The drawback of popular phase angle measurement with naive phase averaging and linear regression analysis is to produce erroneous phase angle, where the phase angle is close to $pmrac{pi}{2}$ radian and the signal quality is poor. The advantage of the proposal is quantified with a computer simulation, a conducted experiment and radio propagation experiments.

In this paper, we propose a real-time vibration extraction system, which extracts vibration component within a given frequency range from videos in real time, for realizing tremor suppression used in microsurgery assistance systems. To overcome the problems in our previous system based on the mean Lucas-Kanade (LK) optical flow of the whole frame, we have introduced a new architecture combining dense optical flow calculated with simple feature matching and block-based band-pass filtering using band-limited multiple Fourier linear combiner (BMFLC). As a feature of optical flow calculation, we use the simplified rotation-invariant histogram of oriented gradients (RIHOG) based on a gradient angle quantized to 1, 2, or 3 bits, which greatly reduces the usage of memory resources for a frame buffer. An obtained optical flow map is then divided into multiple blocks, and BMFLC is applied to the mean optical flow of each block independently. By using the L1-norm of adaptive weight vectors in BMFLC as a criterion, blocks belonging to vibrating objects can be isolated from background at low cost, leading to better extraction accuracy compared to the previous system. The whole system for 480p and 720p resolutions can be implemented on a single Xilinx Zynq-7000 XC7Z020 FPGA without any external memory, and can process a video stream supplied directly from a camera at 60fps.

Approximate computing (AC) has recently emerged as a promising approach to the energy-efficient design of digital systems. For realizing the practical AC design, we need to verify whether the designed circuit can operate correctly under various operating conditions. Namely, the verification needs to efficiently find fatal logic errors or timing errors that violate the constraint of computational quality. This work focuses on the verification where the computational results can be observed, the computational quality can be calculated from computational results, and the constraint of computational quality is given and defined as the constraint which is set to the computational quality of designed AC circuit with given workloads. Then, this paper proposes a novel dynamic verification framework of the AC circuit. The key idea of the proposed framework is to incorporate a quality assessment capability into the Coverage-based Grey-box Fuzzing (CGF). CGF is one of the most promising techniques in the research field of software security testing. By repeating (1) mutation of test patterns, (2) execution of the program under test (PUT), and (3) aggregation of coverage information and feedback to the next test pattern generation, CGF can explore the verification space quickly and automatically. On the other hand, CGF originally cannot consider the computational quality by itself. For overcoming this quality unawareness in CGF, the proposed framework additionally embeds the Design Under Verification (DUV) component into the calculation part of computational quality. Thanks to the DUV integration, the proposed framework realizes the quality-aware feedback loop in CGF and thus quickly enhances the verification coverage for test patterns that violate the quality constraint. In this work, we quantitatively compared the verification coverage of the approximate arithmetic circuits between the proposed framework and the random test. In a case study of an approximate multiply-accumulate (MAC) unit, we experimentally confirmed that the proposed framework achieved 3.85 to 10.36 times higher coverage than the random test.

From edge devices to cloud servers, providing optimized hardware acceleration for specific applications has become a key approach to improve the efficiency of computer systems. Traditionally, many systems employ commercial field-programmable gate arrays (FPGAs) to implement dedicated hardware accelerator as the CPU's co-processor. However, commercial FPGAs are designed in generic architectures and are provided in the form of discrete chips, which makes it difficult to meet increasingly diversified market needs, such as balancing reconfigurable hardware resources for a specific application, or to be integrated into a customer's system-on-a-chip (SoC) in the form of embedded FPGA (eFPGA). In this paper, we propose an eFPGA generation suite with customizable architecture and integrated development environment (IDE), which covers the entire eFPGA design generation, testing, and utilization stages. For the eFPGA design generation, our intellectual property (IP) generation flow can explore the optimal logic cell, routing, and array structures for given target applications. For the testability, we employ a previously proposed shipping test method that is 100% accurate at detecting all stuck-at faults in the entire FPGA-IP. In addition, we propose a user-friendly and customizable Web-based IDE framework for the generated eFPGA based on the NODE-RED development framework. In the case study, we show an eFPGA architecture exploration example for a differential privacy encryption application using the proposed suite. Then we show the implementation and evaluation of the eFPGA prototype with a 55nm test element group chip design.

Compared with the unicast scenario, X channels with multicast messaging can support richer transmission scenarios. The transmission efficiency of the wireless multicast X channel is an important and open problem. This article studies the degrees of freedom of a propagation-delay based multicast X channel with two transmitters and arbitrary receivers, where each transmitter sends K different messages and each receiver desires K - 1 of them from each transmitter. The cyclic polynomial approach is adopted for modeling and analysis. The DoF upper bound is analyzed and shown to be unreachable. Then a suboptimal scheme with one extra time-slot cycle is proposed, which uses the cyclic interference alignment method and achieves a DoF of K - 1. Finally, the feasibility conditions in the Euclidean space are derived and the potential applications are demonstrated for underwater acoustic and terrestrial radio communications.

Aiming at the problem of the deterioration of the contact performance caused by the wear debris generated during the fretting wear of the electrical connector, low-frequency fretting wear experiments were carried out on the contacts of electrical connectors, the accumulation and distribution of the wear debris were detected by the electrical capacitance tomography technology; the influence of fretting cycles, vibration direction, vibration frequency and vibration amplitude on the accumulation and distribution of wear debris were analyzed; the correlation between characteristic value of wear debris and contact resistance value was studied, and a performance degradation model based on the accumulation and distribution of wear debris was built. The results show that fretting wear and performance degradation are the most serious in axial vibration; the characteristic value of wear debris and contact resistance are positively correlated with the fretting cycles, vibration frequency and vibration amplitude; there is a strong correlation between the sum of characteristic value of wear debris and the contact resistance value; the prediction error of ABC-SVR model of fretting wear performance degradation of electrical connectors constructed by the characteristic value of wear debris is less than 6%. Therefore, the characteristic value of wear debris in contact subareas can quantitatively describe the degree of fretting wear and the process of performance degradation.

An efficient bent waveguide and an optical power splitter with a resonator constructed by a metal-dielectric-metal plasmonic waveguide have been analyzed. The method of solution is the finite difference time domain (FD-TD) method with the piecewise linear recursive convolution (PLRC) method. The resonator can be realized by utilizing impedance mismatch at the connection between a narrow waveguide and an input/output waveguide. Numerical results for the bent waveguide show that transmission bands can be controlled by adjusting the length of the narrow waveguide. We have also shown that the optical power of the power splitter is entirely distributed into the output waveguide at the resonant wavelength and its distribution ratio can be controlled.

In this study, the bending losses of chalcogenide glass channel optical waveguides consisting of an As2Se3 core and an As2S3 lower cladding layer were numerically evaluated across the astronomical N-band, which is the mid-infrared spectral range between the 8 µm and 12 µm wavelengths. The results reveal the design rules for bent waveguides in mid-infrared astrophotonic devices.