Various electromagnetic (EM) wave applications have become commonplace, and humans are frequently exposed to EM waves. Therefore, the effect of EM waves on the human body should be evaluated. In this study, we focused on the specific absorption rate (SAR) due to the EM waves emitted from smartphones, developed high-resolution numerical smartphone models, and studied the SAR variation by changing the position and tilt angle (the angle between the display of the smartphone model and horizontal plane) of the smartphone models vis-à-vis the human abdomen, assuming the use of the smartphone at various tilt angles in front of the abdomen. The calculations showed that the surface shape of the human model influenced the SAR variation.

Physical attacks against cryptographic devices and their countermeasures have been studied for over a decade. Physical attacks on block-cipher algorithms usually target a few rounds near the input or the output of cryptographic algorithms. Therefore, in order to reduce the implementation cost or increase the performance, countermeasures tend to be applied to the rounds that can be targeted by physical attacks. For example, for AES, the conventional physical attacks have practical complexity when the target leakage is as deep as 4 rounds. In general, the deeper rounds are targeted, the greater the cost required for attackers. In this paper, we focus on the physical attack that uses the leakage as deep as 5 rounds. Specifically, we consider the recently proposed 5-round mixture differential cryptanalysis, which is not physical attack, into the physical attack scenarios, and propose the corresponding physical attack. The proposed attack can break AES-128 with data complexity and time complexity of 225.31. As a result, it is clear that the rounds as deep as 5 must be protected for AES. Furthermore, we evaluated the proposed attack when the information extracted from side-channel leakage contains noise. In the means of theoretical analysis and simulated attacks, the relationship between the accuracy of information leakage and the complexity of the attack is evaluated.

In the user identification (UI) scheme for a multiple-access fading channel based on a randomly generated (0, 1, -1)-signature code, previous studies used the signature code over a noisy multiple-access adder channel, and only the user state information (USI) was decoded by the signature decoder. However, by considering the communication model as a compressed sensing process, it is possible to estimate the channel coefficients while identifying users. In this study, to improve the efficiency of the decoding process, we propose an iterative deep neural network (DNN)-based decoder. Simulation results show that for the randomly generated (0, 1, -1)-signature code, the proposed DNN-based decoder requires less computing time than the classical signal recovery algorithm used in compressed sensing while achieving higher UI and channel estimation (CE) accuracies.

This work proposes a design methodology that saves the power dissipation under voltage over-scaling (VOS) operation. The key idea of the proposed design methodology is to combine critical path isolation (CPI) and bit-width scaling (BWS) under the constraint of computational quality, e.g., Peak Signal-to-Noise Ratio (PSNR) in the image processing domain. Conventional CPI inherently cannot reduce the delay of intrinsic critical paths (CPs), which may significantly restrict the power saving effect. On the other hand, the proposed methodology tries to reduce both intrinsic and non-intrinsic CPs. Therefore, our design dramatically reduces the supply voltage and power dissipation while satisfying the quality constraint. Moreover, for reducing co-design exploration space, the proposed methodology utilizes the exclusiveness of the paths targeted by CPI and BWS, where CPI aims at reducing the minimum supply voltage of non-intrinsic CP, and BWS focuses on intrinsic CPs in arithmetic units. From this key exclusiveness, the proposed design splits the simultaneous optimization problem into three sub-problems; (1) the determination of bit-width reduction, (2) the timing optimization for non-intrinsic CPs, and (3) investigating the minimum supply voltage of the BWS and CPI-applied circuit under quality constraint, for reducing power dissipation. Thanks to the problem splitting, the proposed methodology can efficiently find quality-constrained minimum-power design. Evaluation results show that CPI and BWS are highly compatible, and they significantly enhance the efficacy of VOS. In a case study of a GPGPU processor, the proposed design saves the power dissipation by 42.7% with an image processing workload and by 51.2% with a neural network inference workload.

Smart contracts are becoming more and more popular in financial scenarios like medical insurance. Rather than traditional schemes, using smart contracts as a medium is a better choice for both participants, as it is fairer, more reliable, more efficient, and enables real-time payment. However, medical insurance contracts need to input the patient's condition information as the judgment logic to trigger subsequent execution. Since the blockchain is a closed network, it lacks a secure network environment for data interaction with the outside world. The Data feed aims to provide the service of the on-chain and off-chain data interaction. Existing researches on the data feed has solved the security problems on it effectively, such as Town Crier, TLS-N and they have also taken into account the privacy-preserving problems. However, these schemes cannot actually protect privacy because when the ciphertext data is executed by the contract, privacy information can still be inferred by analyzing the transaction results, since states of the contract are publicly visible. In this paper, based on zero-knowledge proof and Hawk technology, a on-and-off-chain complete smart contract data feed privacy-preserving scheme is proposed. In order to present our scheme more intuitively, we combined the medical insurance compensation case to implement it, which is called MIPDF. In our MIPDF, the patient and the insurance company are parties involved in the contract, and the hospital is the data provider of data feed. The patient's medical data is sent to the smart contract under the umbrella of the zero-knowledge proof signature scheme. The smart contract verifies the proof and calculates the insurance premium based on the judgment logic. Meanwhile, we use Hawk technology to ensure the privacy of on-chain contract execution, so that no information will be disclosed due to the result of contract execution. We give a general description of our scheme within the Universal Composability (UC) framework. We experiment and evaluate MIPDF on Ethereum for in-depth analysis. The results show that our scheme can securely and efficiently support the functions of medical insurance and achieve complete privacy-preserving.

In this letter, firstly, a novel adaptive beamformer using independent component analysis (ICA) algorithm is proposed. By this algorithm, the ambiguity of amplitude and phase resulted from blind source separation is removed utilizing the special structure of array manifolds matrix. However, there might exist great calibration error when the powers of interferences are far larger than that of desired signal at many applications such as sonar, radio astronomy, biomedical engineering and earthquake detection. As a result, this will lead to a significant reduction in separation performance. Then, a new method based on the combination of ICA and primary component analysis (PCA) is proposed to recover the desired signal's amplitude under strong interference. Finally, computer simulation is carried out to indicate the effectiveness of our methods. The simulation results show that the proposed methods can obtain higher SNR and more accurate power estimation of desired signal than diagonal loading sample matrix inversion (LSMI) and worst-case performance optimization (WCPO) method.

With the development of Internet technology, the demand for signing electronic contracts has been greatly increased. The electronic contract generated by the participants in an online way enjoys the same legal effect as paper contract. The fairness is the key issue in jointly signing electronic contracts by the involved participants, so that all participants can either get the same copy of the contract or nothing. Most existing solutions only focus on the fairness of electronic contract generation between two participants, where the digital signature can effectively guarantee the fairness of the exchange of electronic contracts and becomes the conventional technology in designing the contract signing protocol. In this paper, an efficient blockchain-based multi-party electronic contract signing (MECS) protocol is presented, which not only offers the fairness of electronic contract generation for multiple participants, but also allows each participant to aggregate validate the signed copy of others. Security analysis shows that the proposed MECS protocol enjoys unforgeability, non-repudiation and fairness of electronic contracts, and performance analysis demonstrates the high efficiency of our construction.

In the recent years, deep learning has achieved significant results in various areas of machine learning. Deep learning requires a huge amount of data to train a model, and data collection techniques such as web crawling have been developed. However, there is a risk that these data collection techniques may generate incorrect labels. If a deep learning model for image classification is trained on a dataset with noisy labels, the generalization performance significantly decreases. This problem is called Learning with Noisy Labels (LNL). One of the recent researches on LNL, called DivideMix [1], has successfully divided the dataset into samples with clean labels and ones with noisy labels by modeling loss distribution of all training samples with a two-component Mixture Gaussian model (GMM). Then it treats the divided dataset as labeled and unlabeled samples and trains the classification model in a semi-supervised manner. Since the selected samples have lower loss values and are easy to classify, training models are in a risk of overfitting to the simple pattern during training. To train the classification model without overfitting to the simple patterns, we propose to introduce consistency regularization on the selected samples by GMM. The consistency regularization perturbs input images and encourages model to outputs the same value to the perturbed images and the original images. The classification model simultaneously receives the samples selected as clean and their perturbed ones, and it achieves higher generalization performance with less overfitting to the selected samples. We evaluated our method with synthetically generated noisy labels on CIFAR-10 and CIFAR-100 and obtained results that are comparable or better than the state-of-the-art method.

The 2020 International Conference on Emerging Technologies for Communications (ICETC2020) was held online on December 2nd—4th, 2020, and 213 research papers were accepted and presented in each session. It is expected that the accepted papers will contribute to the development and extension of research in multiple research areas. In this survey paper, all accepted research papers are classified into four research areas: Physical & Fundamental, Communications, Network, and Information Technology & Application, and then research papers are classified into each research topic. For each research area and topic, this survey paper briefly introduces the presented technologies and methods.

Liquid crystal (LC) device has high tunability with low power consumption and it is important not only in visible region but also in terahertz region. In this study, birefringence and absorption losses of hydrogen-bonded LC was estimated at 2.5 THz. Our results indicate that introduction of alkoxy chain to hydrogen-bonded LC is effective to increase birefringence in terahertz region. These results indicate that hydrogen-bonded LCs are a strong candidate for future terahertz devices because of their excellent properties in the terahertz region.

To access Internet services supported in a home network, a mobile node must obtain the right to use an access network, and it must be able to contact a home network gateway to access the Internet in the home network. This means that the device must be authenticated by an AP to use the access network, and it must additionally be authenticated by the home network gateway to access its home network. EAP-PEAP is currently the most commonly used authentication protocol in access networks, and IKEv2 is common security protocol for mutual authentication on the Internet. As the procedures in EAP-PEAP and IKEv2 are quite similar, EAP-PEAP can be replaced by IKEv2. If the access network authentication uses IKEv2-based protocols and the home network authentication also uses IKEv2, the IKEv2 messages exchanged in each authentication become duplicated. However, it should be noted that EAP-IKEv2 is not able to carry EAP exchanges. We propose a hybrid authentication mechanism that can be used to authenticate a mobile node for both networks simultaneously. The proposed mechanism is based on the IKEv2-EAP exchanges instead of the EAP exchanges currently used to authenticate the access network, but our scheme adopts the encapsulation method defined by EAP-IKEv2 to transport the IKEv2 message over IEEE 802.11 so as not to change the current access network authentication architecture and the message format used by the authentication protocols. The scheme authenticates both networks through a single IKEv2 authentication, rather than two authentication procedures - one for the access network and one for the home network. This reduces the number of exchanged messages and authentication time.

In recent years, federated learning has attracted more and more attention as it could collaboratively train a global model without gathering the users' raw data. It has brought many challenges. In this paper, we proposed layer-based federated learning system with privacy preservation. We successfully reduced the communication cost by selecting several layers of the model to upload for global averaging and enhanced the privacy protection by applying local differential privacy. We evaluated our system in non independently and identically distributed scenario on three datasets. Compared with existing works, our solution achieved better performance in both model accuracy and training time.

Machine learning, especially deep learning, is dramatically changing the methods associated with optical thin-film inverse design. The vast majority of this research has focused on the parameter optimization (layer thickness, and structure size) of optical thin-films. A challenging problem that arises is an automated material search. In this work, we propose a new end-to-end algorithm for optical thin-film inverse design. This method combines the ability of unsupervised learning, reinforcement learning and includes a genetic algorithm to design an optical thin-film without any human intervention. Furthermore, with several concrete examples, we have shown how one can use this technique to optimize the spectra of a multi-layer solar absorber device.

Personalized news recommendation is becoming increasingly important for online news platforms to help users alleviate information overload and improve news reading experience. A key problem in news recommendation is learning accurate user representations to capture their interest. However, most existing news recommendation methods usually learn user representation only from their interacted historical news, while ignoring the clustering features among users. Here we proposed a hierarchical user preference hash network to enhance the representation of users' interest. In the hash part, a series of buckets are generated based on users' historical interactions. Users with similar preferences are assigned into the same buckets automatically. We also learn representations of users from their browsed news in history part. And then, a Route Attention is adopted to combine these two parts (history vector and hash vector) and get the more informative user preference vector. As for news representation, a modified transformer with category embedding is exploited to build news semantic representation. By comparing the hierarchical hash network with multiple news recommendation methods and conducting various experiments on the Microsoft News Dataset (MIND) validate the effectiveness of our approach on news recommendation.

This paper presents examination result of possibility for automatic unclear region detection in the CAD system for colorectal tumor with real time endoscopic video image. We confirmed that it is possible to realize the CAD system with navigation function of clear region which consists of unclear region detection by YOLO2 and classification by AlexNet and SVMs on customizable embedded DSP cores. Moreover, we confirmed the real time CAD system can be constructed by a low power ASIC using customizable embedded DSP cores.

The Canonical Polyadic Decomposition (CPD) is the tensor analog of the Singular Value Decomposition (SVD) for a matrix and has many data science applications including signal processing and machine learning. For the CPD, the Alternating Least Squares (ALS) algorithm has been used extensively. Although the ALS algorithm is simple, it is sensitive to a noise of a data tensor in the applications. In this paper, we propose a novel strategy to realize the noise suppression for the CPD. The proposed strategy is decomposed into two steps: (Step 1) denoising the given tensor and (Step 2) solving the exact CPD of the denoised tensor. Step 1 can be realized by solving a structured low-rank approximation with the Douglas-Rachford splitting algorithm and then Step 2 can be realized by solving the simultaneous diagonalization of a matrix tuple constructed by the denoised tensor with the DODO method. Numerical experiments show that the proposed algorithm works well even in typical cases where the ALS algorithm suffers from the so-called bottleneck/swamp effect.

In this paper, we present a classification method for a Computer-Aided Diagnosis (CAD) system in a colorectal magnified Narrow Band Imaging (NBI) endoscopy. In an endoscopic video image, color shift, blurring or reflection of light occurs in a lesion area, which affects the discrimination result by a computer. Therefore, in order to identify lesions with high robustness and stable classification to these images specific to video frame, we implement a CAD system for colorectal endoscopic images with the Convolutional Neural Network (CNN) feature and Support Vector Machine (SVM) classification on the embedded DSP core. To improve the robustness of CAD system, we construct the SVM learned by multiple image sizes data sets so as to adapt to the noise peculiar to the video image. We confirmed that the proposed method achieves higher robustness, stable, and high classification accuracy in the endoscopic video image. The proposed method also can cope with differences in resolution by old and new endoscopes and perform stably with respect to the input endoscopic video image.

Although many software engineering studies have been conducted, it is not clear whether they meet the needs of software development practitioners. Some studies evaluated the effectiveness of software engineering research by practitioners, to clarify the research satisfies the needs of the practitioners. We performed replicated study of them, recruiting practitioners who mainly belong to SMEs (small and medium-sized enterprises) to the survey. We asked 16 practitioners to evaluate cutting-edge software engineering studies presented in ICSE 2016. In the survey, we set the viewpoint of the evaluation as the effectiveness for the respondent's own work. As a result, the ratio of positive answers (i.e., the answers were greater than 2 on a 5-point scale) was 33.3%, and the ratio was lower than past studies. The result was not affected by the number of employees in the respondent's company, but would be affected by the viewpoint of the evaluation.

Local discriminative regions play important roles in fine-grained image analysis tasks. How to locate local discriminative regions with only category label and learn discriminative representation from these regions have been hot spots. In our work, we propose Searching Discriminative Regions (SDR) and Learning Discriminative Regions (LDR) method to search and learn local discriminative regions in images. The SDR method adopts attention mechanism to iteratively search for high-response regions in images, and uses this as a clue to locate local discriminative regions. Moreover, the LDR method is proposed to learn compact within category and sparse between categories representation from the raw image and local images. Experimental results show that our proposed approach achieves excellent performance in both fine-grained image retrieval and classification tasks, which demonstrates its effectiveness.

The present paper proposes orthogonal variable spreading factor codes over finite fields for multi-rate communications. The proposed codes have layered structures that combine sequences generated by discrete Fourier transforms over finite fields, and have various code lengths. The design method for the proposed codes and examples of the codes are shown.