Multi-layer transport networks that utilize sub-lambda paths over a wavelength path have been shown to be effective in accommodating traffic with various levels of granularity. For different service requirements, a virtualized network was proposed where the infrastructure is virtually sliced to accommodate different levels of reliability. On the other hand, network reconfiguration is a promising candidate for quasi-dynamic and multi-granular traffic. Reconfiguration, however, incurs some risks such as service disruption and fluctuations in delay. There has not yet been any study on accommodating and reconfiguring paths according to different service classes in multi-layer transport networks. In this paper, we propose differentiated reconfiguration to address the trade-off relationship between accommodation efficiency and disruption risk in virtualized multi-layer transport networks that considers service classes defined as a combination of including or excluding a secondary path and allowing or not allowing reconfiguration. To implement the proposed network, we propose a multi-layer redundant path accommodation design and reconfiguration algorithm. A reliability evaluation algorithm is also introduced. Numerical evaluations show that when all classes are divided equally, equipment cost can be reduced approximately by 6%. The proposed reconfigurable networks are shown to be a cost effective solution that maintains reliability.

An L2-in-L3 tunneling technology plays an important role in network virtualization based on the concept of Software-Defined Networking (SDN). VXLAN (Virtual eXtensible LAN) and NVGRE (Network Virtualization using Generic Routing Encapsulation) protocols are being widely used in public cloud datacenters. These protocols resolve traditional VLAN problems such as a limitation of the number of virtual networks, however, their network performances are low without dedicated hardware acceleration. Although STT (Stateless Transport Tunneling) achieves far better performance, it has pragmatic problems in that STT packets can be dropped by network middleboxes like stateful firewalls because of modified TCP header semantics. In this paper, we propose yet another layer 4 protocol (Segment-oriented Connection-less Protocol, SCLP) for existing tunneling protocols. Our previous study revealed that the high-performance of STT mainly comes from 2-level software packet pre-reassembly before decapsulation. The SCLP header is designed to take advantage of such processing without modifying existing protocol semantics. We implement a VXLAN over SCLP tunneling and evaluate its performance by comparing with the original VXLAN (over UDP), NVGRE, Geneve, and STT. The results show that the throughput of the proposed method was comparable to STT and almost 70% higher than that of other protocols.

This paper proposes the MIMO MC-CDMA channel estimation method for the various mobile environments. The distinctive feature of the proposed method is possible to robustly estimate with respect to the mobile velocity using the Kalman filter with the colored driving source. Effectiveness of the proposed method are shown by computer simulations.

This paper analyzes the impact of directional antennas in improving the transmission capacity, defined as the maximum allowable spatial node density of successful transmissions multiplied by their data rate with a given outage constraint, in wireless networks. We consider the case where the gain Gm for the mainlobe of beamwidth can scale at an arbitrarily large rate. Under the beamwidth scaling model, the transmission capacity is analyzed for all path-loss attenuation regimes for the following two network configurations. In dense networks, in which the spatial node density increases with the antenna gain Gm, the transmission capacity scales as Gm4/α, where α denotes the path-loss exponent. On the other hand, in extended networks of fixed node density, the transmission capacity scales logarithmically in Gm. For comparison, we also show an ideal antenna model where there is no sidelobe beam. In addition, computer simulations are performed, which show trends consistent with our analytical behaviors. Our analysis sheds light on a new understanding of the fundamental limit of outage-constrained ad hoc networks operating in the directional mode.

The dramatic growth in wireless data traffic has triggered the investigation of fifth generation (5G) wireless communication systems. Small cells will play a very important role in 5G to meet the 5G requirements in spectral efficiency, energy savings, etc. In this paper, we investigate low complexity millimeter-wave communication systems with uniform circular arrays (UCAs) in line-of-sight (LOS) multiple-input multiple-output (MIMO) channels, which are used in fixed wireless access such as small cell wireless backhaul for 5G. First, we demonstrate that the MIMO channel matrices for UCAs in LOS-MIMO channels are circulant matrices. Next, we provide a detailed derivation of the unified optimal antenna placement which makes MIMO channel matrices orthogonal for 3×3 and 4×4 UCAs in LOS channels. We also derive simple analytical expressions of eigenvalues and capacity as a function of array design (link range and array diameters) for the concerned systems. Finally, based on the properties of circulant matrices, we propose a high performance low complexity LOS-MIMO precoding system that combines forward error correction (FEC) codes and spatial interleaver with the fixed IDFT precoding matrix. The proposed precoding system for UCAs does not require the channel knowledge for estimating the precoding matrix at the transmitter under the LOS condition, since the channel matrices are circulant ones for UCAs. Simulation results show that the proposed low complexity system is robust to various link ranges and can attain excellent performance in strong LOS environments and channel estimation errors.

This letter proposes an image fusion method which adopts a union of multiple directional lapped orthogonal transforms (DirLOTs). DirLOTs are used to generate symmetric orthogonal discrete wavelet transforms and then to construct a union of unitary transforms as a redundant dictionary with a multiple directional property. The multiple DirLOTs can overcome a disadvantage of separable wavelets to represent images which contain slant textures and edges. We analyse the characteristic of local luminance contrast, and propose a fusion rule based on interscale relation of wavelet coefficients. Relying on the above, a novel image fusion method is proposed. Some experimental results show that the proposed method is able to significantly improve the fusion performance from those with the conventional discrete wavelet transforms.

Dynamic analysis is frail and insufficient to find hidden paths in environment-intensive program. By analyzing a broad spectrum of different concolic testing systems, we conclude that a number of them cannot handle programs that interact with the environment or require a complete working model. This paper addresses this problem by automatically identifying and modifying outputs of the data input interface function(DIIF). The approach is based on fine-grained taint analysis for detecting and updating the data that interacts with the environment to generate a new set of inputs to execute hidden paths. Moreover, we developed a prototype and conducted extensive experiments using a set of complex and environmentally intensive programs. Finally, the result demonstrates that our approach could identify the DIIF precisely and discover hidden path obviously.

Given a graph G, a set of spanning trees of G are completely independent if for any vertices x and y, the paths connecting them on these trees have neither vertex nor edge in common, except x and y. In this paper, we prove that for graphs of order n, with n ≥ 6, if the minimum degree is at least n-2, then there are at least ⌊n/3⌋ completely independent spanning trees.

In this paper, synchronization for uncertain fractional order chaotic systems is investigated. By using the fractional order extension of the Lyapunov stability criterion, a linear feedback controller and an adaptive controller are designed for synchronizing uncertain fractional order chaotic systems without and with unknown external disturbance, respectively. Quadratic Lyapunov functions are used in the stability analysis of fractional-order systems, and fractional order adaptation law is constructed to update design parameter. The proposed methods can guarantee that the synchronization error converges to zero asymptotically. Finally, illustrative examples are given to confirm the theoretical results.

We discuss software reliability assessment considering multiple changes of software fault-detection phenomenon. The testing-time when the characteristic of the software failure-occurrence or fault-detection phenomenon changes notably in the testing-phase of a software development process is called change-point. It is known that the occurrence of the change-point influences the accuracy for the software reliability assessment based on a software reliability growth models, which are mainly divided into software failure-occurrence time and fault counting models. This paper discusses software reliability growth modeling frameworks considering with the effect of the multiple change-point occurrence on the software reliability growth process in software failure-occurrence time and fault counting modeling. And we show numerical illustrations for the software reliability analyses based on our models by using actual data.

Wireless sensor networks (WSNs) are ubiquitous in a wide range of applications requiring the monitoring of physical and environmental variables, such as target localization and identification. One of these applications is the sensing of ferromagnetic objects. In typical applications, the area to be monitored is typically large compared to the sensing radius of each magnetic sensor. On the other hand, the RF communication radii of WSN nodes are invariably larger than the sensing radii. This makes it economical and efficient to design and implement a sparse network in terms of sensor coverage, in which each point in the monitored area is likely to be covered by at most one sensor. This work aims at investigating the sensing potential and limitations (e.g. in terms of localization accuracy on the order of centimeters) of the Honeywell HMC 1002 2-axis magnetometer used in the context of a sparse magnetic WSN. The effect of environmental variations, such as temperature and power supply fluctuations, magnetic noise, and sensor sensitivity, on the target localization and identification performance of a magnetic WSN is examined based on experimental tests. Signal processing strategies that could enable an alternative to the typical “target present/absent” mode of using magnetic sensors, such as providing successive localization information in time, are discussed.

Combining heterogeneous wireless networks that cross licensed and unlicensed spectra is a promising way of supporting the surge in mobile traffic. The unlicensed band is mostly used by wireless LAN (WLAN) nodes which employ carrier sense multiple access/collision avoidance (CSMA/CA). Since the number of WLAN devices and their traffic are increasing, the wireless resource of the unlicensed band is expected be more depleted in 2020s. In such a wireless environment, the throughput could be extremely low and unstable due to the hidden terminal problem and exposed terminal problem despite of the large resources of the allocated frequency band and high peak PHY rate. In this paper, we propose user equipment (UE) centric access in the unlicensed band, with support by licensed band access in the mobile network. The proposed access enables robust downlink transmission from the access point (AP) to the UEs by mitigating the hidden terminal problem. The licensed spectrum access passes information on the user data waiting at the AP to the UEs and triggers UE reception opportunity (RXOP) acquisition. Furthermore, the adaptive use of UE centric downlink access is presented by using the channel utilization measured at the AP. Computer simulations confirm that licensed access assistance enhances the robustness of the unlicensed band access against the hidden terminal problem.

A one-shot system is a system that can be used only once during its life, and whose failures are detected only through inspections. In this paper, we discuss an inspection policy problem of one-shot system composed of multi-unit in series. Failed units are minimally repaired when failures are detected and all units in the system are replaced when the nth failure is detected after the last replacement. We derive the expected cost rate approximately. Our goal is to determine the optimal inspection policy that minimizes the expected cost rate.

This contribution addresses optimum wireless link selection in a 5G heterogeneous Multicomm environment in which multiple distinct Radio Access Technologies can be operated simultaneously by a given Mobile Device. The related decision making mechanisms are proposed to be part of the Mobile Device User Equipment which identifies the preferred Radio Access Technologies to be operated as well as the preferred Modulation and Coding parameters and finally selects the optimum choice either independently or through negotiation with the Network Infrastructure Equipment. In this context, the concerned Mobile Device is able to manage the bandwidth to be employed for communication — the bandwidth per Radio Access Technology is typically defined by the Network Infrastructure but the possibility for aggregating a multitude of distinct technologies introduces a new degree of freedom enabling the choice of the bandwidth selection. Simulation results demonstrate that the Mobile Device driven selection of a Multicomm configuration may either substantially reduce Mobile Device power consumption (75% in a typical example) or increase the aggregate throughput at an identical power consumption level compared to the single link case (a 3x factor in a typical example).

This paper considers how to evaluate the resiliency for virtualized system with software rejuvenation. The software rejuvenation is a proactive technique to prevent the failure caused by aging phenomenon such as resource exhaustion. In particular, according to Gohsh et al. (2010), we compute a quantitative criterion to evaluate resiliency of system by using continuous-time Markov chains (CTMC). In addition, in order to convert general state-based models to CTMCs, we employ PH (phase-type) expansion technique. In numerical examples, we investigate the resiliency of virtualized system with software rejuvenation under two different rejuvenation policies.

Due to ease of implementation for various user interactive applications, much research on motion recognition has been completed using Kinect. However, one drawback of Kinect is that the skeletal information obtained is provided under the assumption that the user faces Kinect. Thus, the skeletal information is likely incorrect when the user turns his back to Kinect, which may lead to difficulty in motion recognition from the application. In this paper, we implement a highly accurate human motion capture system by installing six Kinect sensors over 360 degrees. The proposed method enables skeleton to be obtained more accurately by assigning higher weights to skeletons captured by Kinect in which the user faces forward. Toward this goal, the front vector of the user is temporally traced to determine whether the user is facing Kinect. Then, more reliable joint information is utilized to construct a skeletal representation of each user.

We propose a novel sparse representation-based direction-of-arrival (DOA) estimation method. In contrast to those that approximate l0-norm minimization by l1-norm minimization, our method designs a reweighted l1 norm to substitute the l0 norm. The capability of the reweighted l1 norm to bridge the gap between the l0- and l1-norm minimization is then justified. In addition, an array covariance vector without redundancy is utilized to extend the aperture. It is proved that the degree of freedom is increased as such. The simulation results show that the proposed method performs much better than l1-type methods when the signal-to-noise ratio (SNR) is low and when the number of snapshots is small.

In indoor localization using sensor networks, performance improvements are required for non-line-of-sight (NLOS) environments in which the estimation error is high. NLOS mitigation schemes involve the detection and elimination of the NLOS measurements. The iterative minimum residual (IMR) scheme, which is often applied to the localization scheme using the time of arrival (TOA), is commonly employed for this purpose. The IMR scheme is a low-complexity scheme and its NLOS detection performance is relatively high. However, when there are many NLOS nodes in a sensor field, the NLOS detection error of the IMR scheme increases and the estimation accuracy deteriorates. Therefore, we propose a new scheme that exploits coarse NLOS detection based on stochastic characteristics prior to the application of the IMR scheme to improve the localization accuracy. Improved performances were confirmed in two NLOS channel models by performing numerical simulations.

This paper studies a cascade system of dynamic binary neural networks. The system is characterized by signum activation function, ternary connection parameters, and integer threshold parameters. As a fundamental learning problem, we consider storage and stabilization of one desired binary periodic orbit that corresponds to control signals of switching circuits. For the storage, we present a simple method based on the correlation learning. For the stabilization, we present a sparsification method based on the mutation operation in the genetic algorithm. Using the Gray-code-based return map, the storage and stability can be investigated. Performing numerical experiments, effectiveness of the learning method is confirmed.

This paper proposes and analyses an improved direction finding (DF) method that uses a rotating interferometer. The minimum sampling frequency is deduced in order to eliminate the phase ambiguity associated with a long baseline, the influence of phase imbalance of receiver is quantitatively discussed and the Root Mean Square Error (RMSE) of both bearing angle and pitch angle are also demonstrated. The theoretical analysis of the rotating interferometer is verified by simulation results, which show that it achieves better RMSE performance than the conventional method.