Network virtualization (NV) provides a promising solution to overcome the resistance of the current Internet in aspects of architecture change, and virtual network embedding (VNE) has been recognized as a core component in NV. In this paper, the current advances in exploring model, methods and technologies for embedding the virtual network into the substrate network, are summarized. Furthermore, the future research trends are drawn. The main distinctive aspects of this survey with early ones include that it is mainly contributed to simplify the VNE problem on large networks, and that more recent publications in this field are introduced. In addition, the suggestions to the future investigation will concern some new terms of the VNE optimization.

It is known that, using just a deck of cards, an arbitrary number of parties with private inputs can securely compute the output of any function of their inputs. In 2009, Mizuki and Sone constructed a six-card COPY protocol, a four-card XOR protocol, and a six-card AND protocol, based on a commonly used encoding scheme in which each input bit is encoded using two cards. However, up until now, there are no known results to construct a set of COPY, XOR, and AND protocols based on a two-card-per-bit encoding scheme, which all can be implemented using only four cards. In this paper, we show that it is possible to construct four-card COPY, XOR, and AND protocols using polarizing plates as cards and a corresponding two-card-per-bit encoding scheme. Our protocols use a minimum number of cards in the setting of two-card-per-bit encoding schemes since four cards are always required to encode the inputs. Moreover, we show that it is possible to construct two-card COPY, two-card XOR, and three-card AND protocols based on a one-card-per-bit encoding scheme using a common reference polarizer which is a polarizing material accessible to all parties.

The high-availability seamless redundancy (HSR) protocol is a representative protocol that fulfills the reliability requirements of the IEC61850-based substation automation system (SAS). However, it has the drawback of creating unnecessary traffic in a network. To solve this problem, a dual virtual path (DVP) algorithm based on HSR was recently presented. Although this algorithm dramatically reduces network traffic, it does not consider the substation timing requirements of messages in an SAS. To reduce unnecessary network traffic in an HSR ring network, we introduced a novel packet transmission (NPT) algorithm in a previous work that considers IEC61850 message types. To further reduce unnecessary network traffic, we propose an extended dual virtual paths (EDVP) algorithm in this paper that considers the timing requirements of IEC61850 message types. We also include sending delay (SD), delay queue (DQ), and traffic flow latency (TFL) features in our proposal. The source node sends data frames without SDs on the primary paths, and it transmits the duplicate data frames with SDs on the secondary paths. Since the EDVP algorithm discards all of the delayed data frames in DQs when there is no link or node failure, unnecessary network traffic can be reduced. We demonstrate the principle of the EDVP algorithm and its performance in terms of network traffic compared to the standard HSR, NPT, and DVP algorithm using the OPNET network simulator. Throughout the simulation results, the EDVP algorithm shows better traffic performance than the other algorithms, while guaranteeing the timing requirements of IEC61850 message types. Most importantly, when the source node transmits heavy data traffic, the EDVP algorithm shows greater than 80% and 40% network traffic reduction compared to the HSR and DVP approaches, respectively.

A method for increasing alignment tolerance in simple multiple-stream transmission is described. Its use of π-shifted antenna directivity phase enables it to cancel interference even when antenna placement deviations occur. The interference cancellation by using π-shifted directivities provides higher alignment tolerance than that with conventional fixed weight methods. It also provides smaller channel gain variation than can be obtained using fixed weights even when antenna displacement occurs. An objective function is described that is determined by the alignment tolerance. The function is defined to maximize the alignment tolerance. The method's validity is confirmed by an experimental analysis of two-stream transmission in which the alignment tolerance of the proposed method is compared to that of conventional fixed weight methods.

A generalized covariance matrix taper (GCMT) model is proposed to enhance the performance of knowledge-aided space-time adaptive processing (KA-STAP) under sea clutter environments. In KA-STAP, improving the accuracy degree of the a priori clutter covariance matrix is a fundamental issue. As a crucial component in the a priori clutter covariance matrix, the taper matrix is employed to describe the internal clutter motion (ICM) or other subspace leakage effects, and commonly constructed by the classical covariance matrix taper (CMT) model. This work extents the CMT model into a generalized CMT (GCMT) model with a greater degree of freedom. Comparing it with the CMT model, the proposed GCMT model is more suitable for sea clutter background applications for its improved flexibility. Simulation results illustrate the efficiency of the GCMT model under different sea clutter environments.

Optimizating the deployment of wireless sensor networks, which is one of the key issues in wireless sensor networks research, helps improve the coverage of the networks and the system reliability. In this paper, we propose an evolutionary algorithm based on modified t-distribution for the wireless sensor by introducing a deployment optimization operator and an intelligent allocation operator. A directed perturbation operator is applied to the algorithm to guide the evolution of the node deployment and to speed up the convergence. In addition, with a new geometric sensor detection model instead of the old probability model, the computing speed is increased by 20 times. The simulation results show that when this algorithm is utilized in the actual scene, it can get the minimum number of nodes and the optimal deployment quickly and effectively.Compared with the existing mainstream swarm intelligence algorithms, this method has satisfied the need for convergence speed and better coverage, which is closer to the theoretical coverage value.

We have studied ultra-low-power superconductor circuits using adiabatic quantum flux parametron (AQFP) logic. Latches, which store logic data in logic circuits, are indispensable logic elements in the realization of AQFP computing systems. Among them, feedback latches, which hold data by using a feedback loop, have advantages in terms of their wide operation margins and high stability. Their drawbacks are their large junction counts and long latency. In this paper, we propose a majority gate-based feedback latch for AQFP logic with a reduced number of junctions. We designed and fabricated the proposed AQFP latches using a standard National Institute of Advanced Industrial Science and Technology (AIST) process. The measurement results showed that the feedback latches operate with wide operation margins that are comparable with circuit simulation results.

A brain-computer interface (BCI) translates the brain activity into commands to control external devices. P300 speller based character recognition is an important kind of application system in BCI. In this paper, we propose a framework to integrate channel correlation analysis into P300 detection. This work is distinguished by two key contributions. First, a coefficient matrix is introduced and constructed for multiple channels with the elements indicating channel correlations. Agglomerative clustering is applied to group correlated channels. Second, the statistics of central tendency are used to fuse the information of correlated channels and generate virtual channels. The generated virtual channels can extend the EEG signals and lift up the signal-to-noise ratio. The correlated features from virtual channels are combined with original signals for classification and the outputs of discriminative classifier are used to determine the characters for spelling. Experimental results prove the effectiveness and efficiency of the channel correlation analysis based framework. Compared with the state-of-the-art, the recognition rate was increased by both 6% with 5 and 10 epochs by the proposed framework.

The dyadic filter bank property of multivariate empirical mode decomposition (MEMD) for white Gaussian noise (WGN) is well established. In order to investigate the way MEMD behaves in the presence of fractional Gaussian noise (fGn), we conduct thorough numerical experiments for MEMD for fGn inputs. It turns out that similar to WGN, MEMD follows dyadic filter bank structure for fGn inputs, which is more stable than empirical mode decomposition (EMD) regardless of the Hurst exponent. Moreover, the estimation of the Hurst exponent of fGn contaminated with different kinds of signals is also presented via MEMD in this work.

A single-flux-quantum (SFQ) arithmetic logic unit (ALU) was designed and tested to evaluate the effectiveness of introducing dynamically reconfigurable logic gates in the design of a superconducting logic circuit. We designed and tested a bit-serial SFQ ALU that can perform six arithmetic/logic functions by using a dynamically reconfigurable AND/OR gate. To ensure stable operation of the ALU, we improved the operating margin of the SFQ AND/OR gate by employing a partially shielded structure where the circuit is partially surrounded by under- and over-ground layers to reduce parasitic inductances. Owing to the introduction of the partially shielded structure, the operating margin of the dynamically reconfigurable AND/OR gate can be improved without increasing the circuit area. This ALU can be designed with a smaller circuit area compared with the conventional ALU by using the dynamically reconfigurable AND/OR gate. We implemented the SFQ ALU using the AIST 2.5kA/cm2 Nb standard process 2. We confirmed high-speed operation and correct reconfiguration of the SFQ ALU by a high-speed test. The measured maximum operation frequency was 30GHz.

The recently proposed distributed adaptive direct position determination (D-ADPD) algorithm provides an efficient way to locating a radio emitter using a sensor network. However, this algorithm may be suboptimal in the situation of colored emitted signals. We propose an enhanced distributed adaptive direct position determination (EDA-DPD) algorithm. Simulations validate that the proposed EDA-DPD outperforms the D-ADPD in colored emitted signals scenarios and has the similar performance with the D-ADPD in white emitted signal scenarios.

As three dimensional (3D) discrete wavelet transform (DWT) is widely used for high resolution volumetric data compression, and to further improve the performance of lossless coding, the adaptive directional lifting (ADL) structure based on non-separable 3D DWT with a (5,3) filter is proposed in this paper. The proposed 3D DWT has less lifting steps and better prediction performance compared to the existing separable 3D DWT with fixed filter coefficients. It also has compatibility with the conventional DWT defined by the JPEG2000 international standard. The proposed method shows comparable and better results with the non-separable 3D DWT and separable 3D DWT and it is effective for lossless coding of high resolution volumetric data.

Because accurate position information plays an important role in wireless sensor networks (WSNs), target localization has attracted considerable attention in recent years. In this paper, based on target spatial domain discretion, the target localization problem is formulated as a sparsity-seeking problem that can be solved by the compressed sensing (CS) technique. To satisfy the robust recovery condition called restricted isometry property (RIP) for CS theory requirement, an orthogonalization preprocessing method named LU (lower triangular matrix, unitary matrix) decomposition is utilized to ensure the observation matrix obeys the RIP. In addition, from the viewpoint of the positioning systems, taking advantage of the joint posterior distribution of model parameters that approximate the sparse prior knowledge of target, the sparse Bayesian learning (SBL) approach is utilized to improve the positioning performance. Simulation results illustrate that the proposed algorithm has higher positioning accuracy in multi-target scenarios than existing algorithms.

The Virtual Machine Consolidation (VMC) algorithm is the core strategy of virtualization resource management software. In general, VMC efficiency dictates cloud datacenter efficiency to a great extent. However, all the current Virtual Machine (VM) consolidation strategies, including the Iterative Correlation Match Algorithm (ICMA), are not suitable for the dynamic VM consolidation of the level of physical servers in actual datacenter environments. In this paper, we propose two VM consolidation and placement strategies which are called standard Segmentation Iteration Correlation Combination (standard SICC) and Multi-level Segmentation Iteration Correlation Combination (multi-level SICC). The standard SICC is suitable for the single-size VM consolidation environment and is the cornerstone of multi-level SICC which is suitable for the multi-size VM consolidation environment. Numerical simulation results indicate that the numbers of remaining Consolidated VM (CVM), which are generated by standard SICC, are 20% less than the corresponding parameters of ICMA in the single-level VM environment with the given initial condition. The numbers of remaining CVMs of multi-level SICC are 14% less than the corresponding parameters of ICMA in the multi-level VM environment. Furthermore, the used physical servers of multi-level SICC are also 5% less than the used servers of ICMA under the given initial condition.

This paper proposes a new class of Hilbert pairs of almost symmetric orthogonal wavelet bases. For two wavelet bases to form a Hilbert pair, the corresponding scaling lowpass filters are required to satisfy the half-sample delay condition. In this paper, we design simultaneously two scaling lowpass filters with the arbitrarily specified flat group delay responses at ω=0, which satisfy the half-sample delay condition. In addition to specifying the number of vanishing moments, we apply the Remez exchange algorithm to minimize the difference of frequency responses between two scaling lowpass filters, in order to improve the analyticity of complex wavelets. The equiripple behavior of the error function can be obtained through a few iterations. Therefore, the resulting complex wavelets are orthogonal and almost symmetric, and have the improved analyticity. Finally, some examples are presented to demonstrate the effectiveness of the proposed design method.

Most Android applications are written in JAVA and run on a Dalvik virtual machine. For smartphone vendors and users who wish to know the performance of an application on a particular smartphone but cannot obtain the source code, we propose a new technique, Dalvik Profiler for Applications (DPA), to profile an Android application on a Dalvik virtual machine without the support of source code. Within a Dalvik virtual machine, we determine the entry and exit locations of a method, log its execution time, and analyze the log to determine the performance of the application. Our experimental results show an error ratio of less than 5% from the baseline tool Traceview which instruments source code. The results also show some interesting behaviors of applications and smartphones: the performance of some smartphones with higher hardware specifications is 1.5 times less than the phones with lower specifications. DPA is now publicly available as an open source tool.

The cycling wheelchair “Profhand” was developed in Japan as locomotion and lower limb rehabilitation device for hemiplegic subjects and elderly persons. Functional electrical stimulation (FES) control of paralyzed lower limbs enables application of the Profhand to paraplegic subjects as a rehabilitation device. In this paper, simplified muscle stimulation control for FES cycling with Profhand was examined for practical application, because cycling speed was low and not stable in our preliminary study and there was a difficulty in setting stimulation electrodes for the gluteus maximus. First, a guideline of target cycling speed to be achieved by FES cycling was determined from voluntary cycling with healthy subjects in order to evaluate FES cycling control. The cycling speed of 0.6m/s was determined as acceptable value and 1.0m/s was as ideal one. Then, stimulation to the gluteus maximus and that to the dorsiflexor muscles in addition to the quadriceps femoris were examined for simple FES cycling control for Profhand with healthy subjects. Stimulation timing was adjusted automatically during cycling based on muscle response time to electrical stimulation and cycling speed, which was shown to be effective for FES cycling control. Simple FES cycling control with Profhand removing stimulation to the gluteus maximus was found to be feasible. Stimulation to the dorsiflexor muscles with the quadriceps femoris was suggested to be effective for practical, simple FES cycling with Profhand in case of removing the gluteus maximus stimulation.

In recent years, multiple-input multiple-output (MIMO) channel models for crowded areas, such as indoor offices, shops, and outdoor hotspot environments, have become a topic of significant interest. In such crowded environments, propagation paths are frequently shadowed by moving objects, such as pedestrians or vehicles. These shadowing effects can cause time variations in the delay and angle-of-arrival (AoA) characteristics of a channel. In this paper, we propose a method for modeling the shadowing effects of pedestrians in a cluster-based channel model. The proposed method uses cluster power variations to model the time-varying channel properties. We also propose a novel method for estimating the cluster power variation properties from measured data. In order to validate our proposed method, channel sounding in the 3GHz band is conducted in a cafeteria during lunchtime. The results for the K parameter, delay spreads, and AoA azimuth spreads are compared for the measured data and the channel data generated using the proposed method. The results indicate that the time-varying delay-AoA characteristics can be effectively modeled using our proposed method.

Effects of electron beam irradiation at 15 keV on graphene are investigated by optical and electron characterization using Raman and two-terminal resistance measurement and photoconductivity measurement. In Raman spectra, increase of defects in D-peak to G-peak ratio by increase of electron irradiation by 70 mC/cm2 was found. Resistance of graphene showed an increase after the irradiation. Rather sensitive change was found in photoconductivity of irradiated graphene under ultra-violet (UV) illumination, suggesting irradiation induced defects affect a photoconductivity properties of the graphene.

Network virtualization environments (NVEs) are emerging to meet the increasing diversity of demands by Internet users where a virtual network (VN) can be constructed to accommodate each specific application service. In the future Internet, diverse service providers (SPs) will provide application services on their own VNs running across diverse infrastructure providers (InPs) that provide physical resources in an NVE. To realize both efficient resource utilization and good QoS of each individual service in such environments, SPs should perform adaptive control on network and computational resources in dynamic and competitive resource sharing, instead of explicit and sufficient reservation of physical resources for their VNs. On the other hand, two novel concepts, software-defined networking (SDN) and network function virtualization (NFV), have emerged to facilitate the efficient use of network and computational resources, flexible provisioning, network programmability, unified management, etc., which enable us to implement adaptive resource control. In this paper, therefore, we propose an architectural design of network orchestration for enabling SPs to maintain QoS of their applications aggressively by means of resource control on their VNs efficiently, by introducing virtual network provider (VNP) between InPs and SPs as 3-tier model, and by integrating SDN and NFV functionalities into NVE framework. We define new north-bound interfaces (NBIs) for resource requests, resource upgrades, resource programming, and alert notifications while using the standard OpenFlow interfaces for resource control on users' traffic flows. The feasibility of the proposed architecture is demonstrated through network experiments using a prototype implementation and a sample application service on nation-wide testbed networks, the JGN-X and RISE.