Short-range ambiguous clutter can seriously affect the performance of airborne radar target detection when detecting long-range targets. In this letter, a multiple-input-multiple-output (MIMO) array structure elevation filter (EF) is designed to suppress short-range clutter (SRC). The sidelobe level value in the short-range clutter region is taken as the objective function to construct the optimization problem and the optimal EF weight vector can be obtained by using the convex optimization tool. The simulation results show that the MIMO system can achieve better range ambiguous clutter suppression than the traditional phased array (PA) system.

The high-precision indoor positioning technology has gradually become one of the research hotspots in indoor mobile robots. Relax and Recover (RAR) is an indoor positioning algorithm using distance observations. The algorithm restores the robot's trajectory through curve fitting and does not require time synchronization of observations. The positioning can be successful with few observations. However, the algorithm has the disadvantages of poor resistance to gross errors and cannot be used for real-time positioning. In this paper, while retaining the advantages of the original algorithm, the RAR algorithm is improved with the adaptive Kalman filter (AKF) based on the innovation sequence to improve the anti-gross error performance of the original algorithm. The improved algorithm can be used for real-time navigation and positioning. The experimental validation found that the improved algorithm has a significant improvement in accuracy when compared to the original RAR. When comparing to the extended Kalman filter (EKF), the accuracy is also increased by 12.5%, which can be used for high-precision positioning of indoor mobile robots.

This letter theoretically analyzes and minimizes the L2-sensitivity for all-pass fractional delay digital filters of which structure is given by the normalized lattice structure. The L2-sensitivity is well known as one of the useful evaluation functions for measuring the performance degradation caused by quantizing filter coefficients into finite number of bits. This letter deals with two cases: L2-sensitivity minimization problem with scaling constraint, and the one without scaling constraint. It is proved that, in both of these two cases, any all-pass fractional delay digital filter with the normalized lattice structure becomes an optimal structure that analytically minimizes the L2-sensitivity.

This paper deals with a state-space approach for adaptive second-order IIR notch digital filters with constrained poles and zeros. A simplified iterative algorithm is derived from the gradient-descent method to minimize the mean-squared output of an adaptive notch digital filter. Then, stability and parameter-estimation bias are analyzed for the simplified iterative algorithm. A numerical example is presented to demonstrate the validity and effectiveness of the proposed adaptive state-space notch digital filter and parameter-estimation bias analysis.

This paper proposes a novel random access identifier (RAID)-linked receiver beamforming method for time division duplex (TDD)-based random access. When the number of receiver antennas at the base station is large in a massive multiple-input multiple-output (MIMO) scenario, the channel estimation accuracy per receiver antenna at the base station receiver is degraded due to the limited received signal power per antenna from the user terminal. This results in degradation in the receiver beamforming (BF) or antenna diversity combining and active RAID detection. The purpose of the proposed method is to achieve accurate active RAID detection and channel estimation with a reasonable level of computational complexity at the base station receiver. In the proposed method, a unique receiver BF vector applied at the base station is linked to each of the M RAIDs prepared by the system. The user terminal selects an appropriate pair comprising a receiver BF vector and a RAID in advance based on the channel estimation results in the downlink assuming channel reciprocity in a TDD system. Therefore, per-receiver antenna channel estimation for receiver BF is not necessary in the proposed method. Furthermore, in order to utilize fully the knowledge of the channel at the user transmitter, we propose applying transmitter filtering (TF) to the proposed method for effective channel shortening in order to increase the orthogonal preambles for active RAID detection and channel estimation prepared for each RAID. Computer simulation results show that the proposed method greatly improves the accuracy of active RAID detection and channel estimation. This results in lower error rates than that for the conventional method performing channel estimation at each antenna in a massive MIMO environment.

This brief paper proposes a dual-wideband filter consisting of a parallel-coupled stepped-impedance-resonator (SIR) and open-circuited stubs. Firstly, a notched UWB (ultra-wideband) bandpass filter (BPF) with steep skirt characteristics is theoretically designed. Then a bandstop filter(BSF) is implemented using an SIR and open stubs. By replacing the transmission line part of UWB filter with the BSF, a novel dual-wideband filter (DWBPF) is realized. As a design example, a DWBPF with two passbands, i.e. 3.4-4.8GHz and 7.25-10.25GHz, is designed to validate the design procedure. The designed filter exhibits steep skirt characteristics.

This paper shows structural optimal design of optical waveguide components utilizing an efficient 3D frequency-domain and 2D time-domain beam propagation method (BPM) with an alternating direction implicit (ADI) scheme. Usual optimal design procedure is based on iteration of numerical simulation, and total computational cost of the optimal design mainly depends on the efficiency of numerical analysis method. Since the system matrices are tridiagonal in the ADI-based BPM, efficient analysis and optimal design are available. Shape and topology optimal design shown in this paper is based on optimization of density distribution and sensitivity analysis to the density parameters. Computational methods of the sensitivity are shown in the case of using the 3D semi-vectorial and 2D time-domain BPM based on ADI scheme. The validity of this design approach is shown by design of optical waveguide components: mode converters, and a polarization beam splitter.

A novel compact 5-pole bandpass filter (BPF) using two different types of resonators, one is coaxial TEM-mode resonator and the other dielectric triple-mode resonator, is proposed in this paper. The coaxial resonator is a simple single-mode resonator, while the triple-mode dielectric resonator (DR) includes one TM01δ mode and two degenerate HE11 modes. An excellent spurious performance of the BPF is obtained due to the different resonant behaviors of these two types of resonators used in the BPF. The coupling scheme of the 5-pole BPF includes two cascade triplets (CTs) which produce two transmission zeros (TZs) and a sharp skirt of the passband. Behaviors of the resonances, the inter-resonance couplings, as well as their tuning methods are investigated in detail. A procedure of mapping the coupling matrix of the BPF to its physical dimensions is developed, and an optimization of these physical dimensions is implemented to achieve best performance of the filter. The designed BPF is operated at 1.84GHz with a bandwidth of 51MHz. The stopband rejection is better than 20dB up to 9.7GHz (about 5.39×f0) except 7.85GHz. Good agreement between the designed and theoretically synthesized responses of the BPF is reached, verifying well the proposed configuration of the BPF and its design method.

The Euclidean projection operation is the most complex and time-consuming of the alternating direction method of multipliers (ADMM) decoding algorithms, resulting in a large number of resources when deployed on hardware platforms. We propose a simplified line segment projection algorithm (SLSA) and present the hardware design and the quantization scheme of the SLSA. In simulation results, the proposed SLSA module has a better performance than the original algorithm with the same fixed bitwidths due to the centrosymmetric structure of SLSA. Furthermore, the proposed SLSA module with a simpler structure without hypercube projection can reduce time consuming by up to 72.2% and reduce hardware resource usage by more than 87% compared to other Euclidean projection modules in the experiments.

This paper addresses a distributed filter over wireless sensor networks for optimal estimation. A distributed filter over the networks allows all local estimators to calculate optimal estimates with a scalable communication cost. Outputs of the distributed filter for the optimal estimation can be denoted as a solution of a consensus optimization problem. Thus, the distributed filter is designed based on distributed alternating direction method of multipliers (ADMM). The remarkable points of the distributed filter based on the ADMM are that: the distributed filter has a faster convergence rate than distributed subgradient projection algorithm; the weight, which is optimized by a semidefinite programming problem, accelerates the convergence rate of the proposed method.

A surrogate-based electromagnetic (EM) optimization using neural networks (NNs) is presented for computationally efficient microwave bandpass filter (BPF) design. This paper first describes the forward problem (EM analysis) and the inverse problems (EM design), and the two fundamental issues in BPF designs. The first issue is that the EM analysis is a time-consuming task, and the second one is that EM design highly depends on the structural optimization performed with the help of EM analysis. To accelerate the optimization design, two surrogate models of forward and inverse models are introduced here, which are built with the NNs. As a result, the inverse model can instantaneously guess initial structural parameters with high accuracy by simply inputting synthesized coupling-matrix elements into the NN. Then, the forward model in conjunction with optimization algorithm enables designers to rapidly find optimal structural parameters from the initial ones. The effectiveness of the surrogate-based EM optimization is verified through the structural designs of a typical fifth-order microstrip BPF with multiple couplings.

We studied whether a statement similar to the Ghouila-Houri's theorem might hold for alternating orientations of cocomparability graphs. In this paper, we give the negative answer. We prove that it is NP-complete to decide whether a cocomparability graph has an orientation that is alternating and acyclic. Hence, cocomparability graphs with an acyclic alternating orientation form a proper subclass of alternately orientable cocomparability graphs. We also provide a separating example, that is, an alternately orientable cocomparability graph such that no alternating orientation is acyclic.

The altered fingerprints help criminals escape from police and cause great harm to the society. In this letter, an altered fingerprint detection method is proposed. The method is constructed by two deep convolutional neural networks to train the time-domain and frequency-domain features. A spectral attention module is added to connect two networks. After the extraction network, a feature fusion module is then used to exploit relationship of two network features. We make ablation experiments and add the module proposed in some popular architectures. Results show the proposed method can improve the performance of altered fingerprint detection compared with the recent neural networks.

While social media is now used by many people and plays a role in distributing information, it has recently created an unexpected problem: the actual shrinkage of information sources. This is mainly due to the ease of connecting people with similar opinions and the recommendation system. Biased information distribution promotes polarization that divides people into multiple groups with opposing views. Also, people may receive only the seemingly positive information that they prefer, or may trigger them into holding onto their opinions more strongly when they encounter opposing views. This, combined with the characteristics of social media, is accelerating the polarization of opinions and eventually social division. In this paper, we propose a model of opinion formation on social media to simulate polarization. While based on the idea that opinion neutrality is only relative, this model provides new techniques for dealing with polarization.

Reservoir computing (RC) is an attractive alternative to machine learning models owing to its computationally inexpensive training process and simplicity. In this work, we propose EnsembleBloomCA, which utilizes cellular automata (CA) and an ensemble Bloom filter to organize an RC system. In contrast to most existing RC systems, EnsembleBloomCA eliminates all floating-point calculation and integer multiplication. EnsembleBloomCA adopts CA as the reservoir in the RC system because it can be implemented using only binary operations and is thus energy efficient. The rich pattern dynamics created by CA can map the original input into a high-dimensional space and provide more features for the classifier. Utilizing an ensemble Bloom filter as the classifier, the features provided by the reservoir can be effectively memorized. Our experiment revealed that applying the ensemble mechanism to the Bloom filter resulted in a significant reduction in memory cost during the inference phase. In comparison with Bloom WiSARD, one of the state-of-the-art reference work, the EnsembleBloomCA model achieves a 43× reduction in memory cost while maintaining the same accuracy. Our hardware implementation also demonstrated that EnsembleBloomCA achieved over 23× and 8.5× reductions in area and power, respectively.

This paper proposes a novel multi-layer substrate integrated waveguide (SIW) resonator loaded with asymmetric E-shaped slot-lines and shows a tri-band band-pass filter (BPF) using the proposed structure. In the previous literature, various SIW resonators have been proposed to simultaneously solve the problems of large area and high insertion loss. Although these SIWs have a lower insertion loss than planar-type resonators using a printed circuit board, the size of these structures tends to be larger. A multi-layer SIW resonator loaded with asymmetric E-shaped slot-lines can solve the above problems and realize a tri-band BPF without increasing the size to realize further miniaturization. The theoretical design method and the structural design are shown. Moreover, the configured structure is fabricated and measured for showing the validity of the design method in this paper.

In this paper, millimeter wave (mmWave) filtenna arrays for 5G applications are proposed. Two kinds of 2-element subarrays are designed for horizontal and vertical polarizations. Each subarray consists of three substrate integrated waveguide (SIW) cavities and two sets of stacked patches. Fully-shielded combined eighth-mode SIW (FSD-CEMSIW) cavities are used in the filtenna design. This cavity not only works as the first-stage resonator but also as the power divider for the subarray. As a result, a four-order bandpass filtering response is achieved. Filtenna arrays were fabricated and measured for demonstration. The impedance bandwidths of these subarrays cover 24-30GHz, including the 5G mmWave bands (n257, n258, and n261) with measured average gains of 8.2dBi and more than 22dB out-of-band suppression. The proposed antennas can be good candidates for 5G mmWave communication to reduce the system complexity and potential cost of the mmWave front-ends.

Recently, the performances of discriminative correlation filter (CF) trackers are getting better and better in visual tracking. In this paper, we propose spatial-temporal regularization with precise state estimation based on discriminative correlation filter (STPSE) in order to achieve more significant tracking performance. First, we consider the continuous change of the object state, using the information from the previous two filters for training the correlation filter model. Here, we train the correlation filter model with the hand-crafted features. Second, we introduce update control in which average peak-to-correlation energy (APCE) and the distance between the object locations obtained by HOG features and hand-crafted features are utilized to detect abnormality of the state around the object. APCE and the distance indicate the reliability of the filter response, thus if abnormality is detected, the proposed method does not update the scale and the object location estimated by the filter response. In the experiment, our tracker (STPSE) achieves significant and real-time performance with only CPU for the challenging benchmark sequence (OTB2013, OTB2015, and TC128).

At present, the application of different types of memristors in electronics is being deeply studied. Given the nonlinearity characterizing memristors, a circuit with memristors cannot be treated by classical circuit analysis. In this paper, memristor is equivalent to a nonlinear dynamic system composed of linear dynamic system and nonlinear static system by Volterra series. The nonlinear transfer function of memristor is derived. In the complex frequency domain, the n-order complex frequency response of memristor is established by multiple Laplace transform, and the response of MLC parallel circuit is taken as an example to verify. Theoretical analysis shows that the complex frequency domain analysis method of memristor transforms the problem of solving nonlinear circuit in time domain into n times complex frequency domain analysis of linear circuit, which provides an idea for nonlinear dynamic system analysis.

This paper proposes two accurate source-number estimation methods for array antennas and multi-input multi-output radar. Direction of arrival (DOA) estimation is important in high-speed wireless communication and radar imaging. Most representative DOA estimation methods require the source-number information in advance and often fail to estimate DOAs in severe environments such as those having low signal-to-noise ratio or large transmission-power difference. Received signals are often bandlimited or narrowband signals, so the proposed methods first involves denoising preprocessing by removing undesired components then comparing the original and denoised signal information. The performances of the proposed methods were evaluated through computer simulations.