We have successfully demonstrated a GaInAs/InP multiple quantum well (MQW)-based wavelength switch composed of the straight arrayed waveguide with linearly varying refractive index distribution by changing the refractive index using thermo-optic effect. Since optical path length differences between waveguides in the array were achieved through refractive index differences that were controlled by SiO2 mask design in selective metal-organic vapor phase epitaxy (MOVPE), wavelength demultiplexing, and the output port switching in each wavelength of light by the refractive index change in the array waveguides through the thermo-optic effect were achieved. We have obtained the wavelength switching and the change of transmission spectra in each output ports.

The chaotic search is introduced into Quantum-behaved Particle Swarm Optimization (QPSO) to increase the diversity of the swarm in the latter period of the search, so as to help the system escape from local optima. Taking full advantages of the characteristics of ergodicity and randomicity of chaotic variables, the chaotic search is carried out in the neighborhoods of the particles which are trapped into local optima. The experimental results on test functions show that QPSO with chaotic search outperforms the Particle Swarm Optimization (PSO) and QPSO.

A multiple-antenna receiving and combining scheme is proposed for high-data-rate transmitted-reference (TR) Ultra-Wideband (UWB) systems. The nonlinearity of the inter-symbol interference (ISI) model is alleviated via simple antenna combining. Under the simplified ISI model, frequency domain equalization (FDE) is adopted and greatly reduces the complexity of the equalizer. A simple estimation algorithm for the simplified ISI model is presented. Simulation results demonstrate that compared to the single receive antenna scheme, the proposed method can obtain a significant diversity gain and eliminate the BER floor effect. Moreover, compared to the complex second-order time domain equalizer, FDE showed better performance robustness in the case of imperfect model estimation.

H∞ optimal control is one of the most successful achievements in the post modern control theory. In the H∞ optimal control, we design a controller that minimizes the H∞ norm of a given system. Although the algorithms to solve the problem have already been reported, they focus on numerical systems (systems without any unknown parameters) and, can not be applied for parametric systems (systems with unknown parameters). Given a parametric system, this paper presents an algorithm to compute the optimal H∞ norm of the system achieved by an output feedback controller. The optimal H∞ norm is expressed as , where φ(k) denotes a root of a bivariate polynomial. A numerical example is given to show the effectiveness of the algorithm.

This paper proposes a new face recognition method based on mutual projection of feature distributions. The proposed method introduces a new robust measurement between two feature distributions. This measurement is computed by a harmonic mean of two distance values obtained by projection of each mean value into the opposite feature distribution. The proposed method does not require eigenvalue analysis of the two subspaces. This method was applied to face recognition task of temporal image sequence. Experimental results demonstrate that the computational cost was improved without degradation of identification performance in comparison with the conventional method.

High-speed wireless communication systems have attracted much attention in recent years. To achieve a high-speed wireless communication system that utilizes an ultra-wide-frequency band, a broadband antenna is required. However, it is difficult to obtain an antenna that has uniform characteristics in a broad frequency band. Moreover, propagation characteristics are distorted in a multi-path environment. Thus, the communication quality tends to degrade due to the distortion in the frequency characteristics of the wideband communication system. This paper proposes a quasi-inverse filter (QIF) to improve the compensation effect for the transmitter antenna. Furthermore, we propose a method that employs the newly developed QIF that compensates for frequency characteristic distortion. We evaluate different configurations for the compensation system employing a pre-filter and post-filter in the wideband communication system. The effectiveness of the QIF in the case of severe distortion is verified by computer simulation. The proposed method is applied to a disc monopole antenna as a concrete example of a broadband antenna, and the compensation effect for the antenna is indicated.

Spread Spectrum (SS) has been widely used for various wireless systems such as cellular systems, wireless local area network (LAN) and so on. Using multiple antennas at the receiver, two-dimensional (2D) RAKE is realized over the time- and the space-domain. However, it should be noted that the 2D-RAKE receiver must detect the bit timing prior to the RAKE combining. In case of deep fading, it is often difficult to detect it due to low signal-to-noise power ratio (SNR). To solve this problem, we propose a new blind 2D-RAKE receiver based on the constant modulus algorithm (CMA). Since it does not need a priori bit timing detection, it is possible to compensate frequency selective fading even in very low SNR environments. The proposed method is particularly suitable for the software defined radio (SDR) architecture. The performance of the proposed method is investigated through computer simulations.

This letter proposes a new algorithm of refining the quantization parameter in H.264 real-time encoding. In the H.264 encoding, the quantization parameter computed according to the quadratic rate model is not accurate in meeting the target bit rate. In order to make the actual encoded bit rate closer to the target bit rate, ρ-domain rate model is introduced in our proposed quantization parameter refinement algorithm. Simulation results show that the proposed algorithm achieves obvious gain in PSNR and has stabler encoded bit rate compared to Jiang's algorithm.

Digital video encapsulates the time series of a frame (still) images, where overall video quality can be obtained by using the quality of each frame image and the temporal information between the frame image. Coding of video produces degradation of these two types of information. These degradations can be classified as spatial degradation (static degradation) of a frame images and temporal degradation between frame image (dynamic degradation). In the framework of video quality evaluation it is necessary to consider those degradations, because their contents are strongly interdependable and quantification is problematic for these degradations. Therefore, the development of an objective video quality assessment method for single video quality requires to investigate how much static degradation and dynamic degradation affect single video quality. In this research, single video quality was predicted highly accuratly by using frame quality as static degradation and frame rate information as dynamic degradation.

The TFT-LCD image has non-uniform brightness that is the major difficulty of finding the visible defect called Mura in the field. To facilitate Mura detection, background signal shading should level off and Mura signal must be amplified. In this paper, Mura signal amplification and background signal flattening method is proposed based on human visual system (HVS). The proposed DC normalized contrast sensitivity function (CSF) is used for the Mura signal amplification and polynomial regression (PR) is used to level off the background signal. In the enhanced image, tri-modal thresholding segmentation technique is used for finding Dark and White Mura at the same time. To select reliable defect, falsely detected invisible region is eliminated based on Weber's Law. By the experimental results of artificially generated 1-d signal and TFT-LCD image, proposed algorithm has novel enhancement results and can be applied to real automated inspection system.

This letter describes a new QR-decomposition maximum likelihood detector that is combined with frequency-domain equalization for single-carrier transmission based multiple-input multiple-output systems. By utilizing the equalized substreams to adjust the frequency selectivity in corresponding substreams in subsequent stages, the packet error rate performances of the proposed detector is superior to that of the minimum mean squared error receiver by a factor of the receive antenna diversity gain.

Analysis of resonance frequency in shorted transmission lines with inserted capacitor has been made. The analysis shows a resonance frequency dependence on capacitance position on a shorted transmission line. Two analysis methods are presented to predict the resonance frequency and understand how the inserted capacitor affects the resonance frequency of the shorted transmission line. Using this knowledge we propose a new structure for digital controlled oscillators utilizing the capacitance's sensitivity dependence on position of the shorted transmission line to increase the frequency resolution. A 9 GHz transmission line based digital controlled oscillator was designed and fabricated as a proof of concept. Measured results show that more than 100 times frequency step resolution increase is possible utilizing the same tuning capacitor size located at different points on the transmission line.

This paper presents design and analysis of an Automatic Repeat reQuest (ARQ) scheme for enhancing the throughput and reliability of broadband wireless access systems. The impact of ARQ is emphasized in terms of early error recovery, when Internet data applications and the TCP protocol are considered over a point-to-multipoint fixed wireless system. A selective repeat type ARQ scheme is designed and analyzed through extensive, realistic modeling and simulation of the entire network protocol stack and the wireless channel. The system-wide impact of ARQ design is quantified in terms of end-to-end delay, throughput and SNR gain and in all these metrics, significant performance improvement is observed. Enhanced features, namely, Segmentation and Reassembly (SAR) and Bitmap Compression, are proposed and shown to reduce the overhead costs.

This paper proposes a wide-locking range divide-by-3 frequency divider employing 3D helical inductors fabricated in the 0.18-µm 1P6M CMOS technology. The divider consists of an nMOS cross-coupled LC oscillator and two injection MOSFETs in series with the cross-coupled NMOSFETs, and the LC resonator is composed of two 3D helical inductors and varactors. The aim of using 3D inductor is to reduce chip size. At the supply voltage of 1.2 V, the divider free-running frequency is tunable from 2.1 GHz to 2.6 GHz, and at the incident power of 0 dBm the locking range is about 2.11 GHz (29.16%), from the incident frequency 5.99 GHz to 8.1 GHz. The core power consumption is 4.56 mW. The die area is 0.6640.831 mm2.

In this paper, the impact of display on quality assessment is addressed. Subjective quality assessment experiments have been performed on both LCD and CRT displays. Two sets of still images and two sets of moving pictures have been assessed using either an ACR or a SAMVIQ protocol. Altogether, eight experiments have been led. Results are presented and discussed, some differences are pointed out. Concerning moving pictures, these differences seem to be mainly due to LCD moving artefacts such as motion blur. LCD motion blur has been measured objectively and with psycho-physics experiments. A motion-blur metric based on the temporal characteristics of LCD can be defined. A prediction model have been then designed which predict the differences of perceived quality between CRT and LCD. This motion-blur-based model enables the estimation of perceived quality on LCD with respect to the perceived quality on CRT. Technical solutions to LCD motion blur can thus be evaluated on natural contents by this mean.

In this paper, we show that motion sharpening phenomenon can be explained as a form of visual masking for a special case where a video sequence is composed of alternate frames with different level of sharpness. A frame of higher sharpness behaves to mask the ambiguity of a subsequent frame of lower sharpness and hence preserves the perceptive quality of the whole sequence. Borrowing the mechanism for visual masking, we formulated a quantitative model for deriving the minimum spatial frequency conditions which preserves the subjective quality of the frames being masked. The quantitative model takes into account three fundamental properties of the video signals, namely the size of motion, average luminance and the power of each frequency components. The psychophysical responses towards the changes of these properties are obtained through subjective assessment tests using video sequences of simple geometrical patterns. Subjective experiments on natural video sequences show that more than 75% of viewers could make no distinction between the original sequence and the one processed using the quantitative model.

For wireless receivers, low-power 1.2-V 12-bit 100-MSPS pipeline ADCs are fabricated in 90-nm CMOS technology. To achieve low-power dissipation at 1.2 V without the degradation of SNR, the configuration of 2.5 bit/stage is employed with an I/Q amplifier sharing technique. Furthermore, single-stage pseudo-differential amplifiers are used in a Sample-and-Hold (S/H) circuit and a 1st Multiplying Digital-to-Analog Converter (MDAC). The pseudo-differential amplifier with two-gain-stage transimpedance gain-boosting amplifiers realizes high DC gain of more than 90 dB with low power. The measured SNR of the 100-MSPS ADC is 66.7 dB at 1.2-V supply. Under that condition, each ADC dissipates only 55 mW.

As THz wave has the advantages of enough resolution and penetration to materials, it has been examined to be used for the imaging system. The propagation distance of THz wave is limited to be short. That is also the advantage for application to the indoor wireless communication etc. For the achievement of the ultra-high frequency oscillator (and concurrently transmitter) device, the properties of small, electronic excitation, the antenna constructed and being on the wafer are important. For the purpose, the Negative differential resistance Dual channel transistor (NDR-DCT) proposed by AIST is utilized. In this paper, as an initial theoretical analysis, we simulated the oscillation frequency of this device at about 100 GHz-1THz within the Terahertz band on which the above applications was expected. The equivalent circuit model of NDR-DCT was shown based on the analogy with the resonant tunnelling diode (RTDs), and the antenna as the resonance circuit part was designed by the numerical analysis. The possibility of the THz oscillation of this device was confirmed. The slit reflector that we proposed can realize the slot antenna on the device effectively and is suitable for three terminal structure semiconductor. its manufacturing is relatively easy.

This paper discusses the design of configurations of videophone equipment aimed at online sign interpretation. We classified interpretation services into three types of situations: on-site interpretation, partial online interpretation, and full online interpretation. For each situation, the spatial configurations of the equipment are considered keeping the issue of nonverbal signals in mind. Simulation experiments of sign interpretation were performed using these spatial configurations and the qualities of the configurations were assessed. The preferred configurations had the common characteristics that the hearing subject could see the face of his/her principal conversation partner, that is, the deaf subject. The results imply that hearing people who do not understand sign language utilize nonverbal signals for facilitating interpreter-mediated conversation.

In recent years, a horizontal table with a large number of attributes is widely used in OLAP or e-business applications to analyze multidimensional data efficiently. For efficient storing and querying of horizontal tables, recent works have tried to transform a horizontal table to a traditional vertical table. Existing works, however, have the drawback of not considering an optimized PIVOT operation provided (or to be provided) in recent commercial RDBMSs. In this paper we propose a formal approach that exploits the optimized PIVOT operation of commercial RDBMSs for storing and querying of horizontal tables. To achieve this goal, we first provide an overall framework that stores and queries a horizontal table using an equivalent vertical table. Under the proposed framework, we then formally define 1) a method that stores a horizontal table in an equivalent vertical table and 2) a PIVOT operation that converts a stored vertical table to an equivalent horizontal view. Next, we propose a novel method that transforms a user-specified query on horizontal tables to an equivalent PIVOT-included query on vertical tables. In particular, by providing transformation rules for all five elementary operations in relational algebra as theorems, we prove our method is theoretically applicable to commercial RDBMSs. Experimental results show that, compared with the earlier work, our method reduces storage space significantly and also improves average performance by several orders of magnitude. These results indicate that our method provides an excellent framework to maximize performance in handling horizontal tables by exploiting the optimized PIVOT operation in commercial RDBMSs.