This paper first gives the exact surface integral representation for PO diffracted electromagnetic fields from bounded flat plate through the deformations of the original surface by using field equivalence principle. This exact representation with the surface integral can be approximately reduced to novel line integral along the boundary of the plate by the use of Maggi-Rubinowicz transformation, which keeps a high accuracy even in near zone. Numerical results for the scattering of the electric dipole wave from the square planar plate are presented for demonstrating the accuracy.

The MUSIC (Multiple Signal Classification) technique with the circular array can estimate both elevational and azimuthal direction-of-arrival (DOA). This conventional method can not distinguish coherent signals, therefore, it can not estimate proper DOA in the presence of coherent signals. On the other hand, limited as to uniformly spaced linear arrays, the spatial smoothing technique is shown to be effective approach in decorrelating coherent signals. This scheme can not be applied directly to the nonlinear arrays. To overcome the coherent signal nonseparation problem in the nonlinear arrays, the approach using a linear interpolation technique has been proposed. However, this approach provides DOA estimates in one dimensional. In our proposed method, we use not only a linear interpolation technique for the circular array but also the symmetry of the circular array. The computer simulation is performed to demonstrate the usefulness of our method. As its result shows, the method can perform well even in the presence of coherent signals.

Beam reconfiguration by structural reconfigurable antenna, such as the small multi-panel reconfigurable reflector antenna, has an aspect of great concern, that is the effects due to the use of a number of small panels to form the reflecting surface. It is thus a matter of great interest to numerically investigate all possible factors affecting the performance of this type of antenna such as: neighboring panels blocking, diffraction. The "null-field hypothesis" and PTD are employed to account for the effects of both phenomena on the main beam steering ability and the cross-polar level. In addition, the transformation of the polygonal flat domains into the square domains is applied in calculating the PO radiation field due to the various irregular polygonal flat sections of the arbitrary initial approximate reflector e.g., the flat circular reflector and the paraboloidal reflector. It is found that the main contribution to the total cross polarization is depolarization due to the finite size of the panels. The maximum cross-polar gain predicted using PTD is around -30 dB. The blocking effect has minor influence on cross-polarization. Both effects cause distortion on the co-polar pattern for the observer far from boresight but blocking has more influence than edge diffraction. Both effects have minor influence on the co-polar gain. The co-polar gain has variation of less than or equal to 0.07 dB in the flat case and 0.16 dB in the paraboloid case.

We propose a method for compensating distortion of image by calibrating intrinsic camera parameters by image registration which does not need point-to-point correspondence. The proposed method divides the registration between a calibration pattern and a distorted image observed by a camera into two steps. The first step is the straightforward registration from the pattern in order to correct the displacement due to projection. The second step is the backward registration from the observed image for compensating the distortion of the image. Both of the steps use Gauss-Newton method, a nonlinear optimization technique, to minimize residuals of intensities so that the pattern and the observed image become the same. Experimental results show the usefulness of the proposed method. Finally we discuss the convergence of the proposed method which consists of the two registration steps.

Recently the effect of the angular spread caused by locally scattered signals in the vicinity of the mobile has received considerable attention. This paper proposes the Extended Array Mode Vector (EAMV) which represents the Instantaneous Angular Spread (IAS) as well as the Instantaneous Direction Of Arrival (IDOA) of the received signal at the Base Station (BS). Using the EAMV, MUSIC algorithm is generalized in order that it is possible to estimate both the IDOA and the IAS. In computer simulations, the estimates of the IDOA and the IAS in the fading situation are evaluated. The results show that the estimates for small angular spread agree well with the given values and demonstrate the validity of the proposed approach.

This paper proposes a 2.6 GHz low cost DBF array antenna system and reports its evaluation based on our experimental results. The proposed system is partially constructed by digital devices for the simplification of hardware, and employs some techniques for improving the resolution. The system is evaluated through the DOA estimation by the MUSIC algorithm inside a radio anechoic chamber. As a result, we found that the proposed system estimates the DOA with the highest accuracy at which MUSIC algorithm can perform. Moreover, this paper discusses the estimation errors. We also found that the estimation error is particularly affected from the inaccurate element interval.

This paper presents the outline of the systolic array recursive least-squares (RLS) processor prototyped primarily with the aim of broadband mobile communication applications. To execute the RLS algorithm effectively, this processor uses an orthogonal triangularization technique known in matrix algebra as QR decomposition for parallel pipelined processing. The processor board comprises 19 application-specific integrated circuit chips, each with approximately one million gates. Thirty-two bit fixed-point signal processing takes place in the processor, with which one cycle of internal cell signal processing requires approximately 500 nsec, and boundary cell signal processing requires approximately 80 nsec. The processor board can estimate up to 10 parameters. It takes approximately 35 µs to estimate 10 parameters using 41 known symbols. To evaluate signal processing performance of the prototyped systolic array processor board, processing time required to estimate a certain number of parameters using the prototyped board was comapred with using a digital signal processing (DSP) board. The DSP board performed a standard form of the RLS algorithm. Additionally, we conducted minimum mean-squared error adaptive array in-lab experiments using a complex baseband fading/array response simulator. In terms of parameter estimation accuracy, the processor is found to produce virtually the same results as a conventional software engine using floating-point operations.

The hardware implementation of a proposed high dimensional discrete torus knot code was successfully realized on an ASIC chip. The code has been worked on for more than a decade since then at Aichi Prefectural University and Nagoya Institutes of Technology, both in Nagoya, Japan. The hardware operation showed the ability to correct the errors about five to ten times the burst length, compared to the conventional codes, as expected from the code configuration and theory. The result in random error correction was also excellent, especially at a severely degraded error rate range of one hundredth to one tenth, and also for high grade characteristic exceeding 10-6. The operation was quite stable at the worst bit error rate and realized a high speed up to 50 Mbps, since the coder-decoder configuration consisted merely of an assemblage of parity check code and hardware circuitry with no critical loop path. The hardware architecture has a unique configuration and is suitable for large scale ASIC design. The developed code can be utilized for wider applications such as mobile computing and qualified digital communications, since the code will be expected to work well in both degraded and high grade channel situations.

C-axis junction-arrays, with a-b plane sizes of sub-microns to 10 microns, were patterned on Bi2Sr2CaCu2O8+x single crystals with either a mesa or an overlap structure. We measured the current-voltage (I-V) characteristics with microwave irradiation at a few to 100 gigahertz. At a few gigahertz, often observed were chaotic properties. Under irradiation at 100 GHz, we successfully performed harmonic mixings between the 100 GHz signal and up to the 100th harmonic of a local oscillator at about 1 GHz. Given in this paper are discussions on the observation of individual Shapiro steps, and descriptions of the relevant results. Our experimental results show that intrinsic Josephson junctions in layered superconductors can be good candidates for high frequency applications.

The capability of frequency-swept cross-borehole radar to detect an empty rectangular cylinder embedded in a dielectric medium is simulated numerically by employing the boundary element method. The frequency loci providing the strongest double dips in the received signal pattern are plotted as functions of the observation distance and the cross-sectional width. It is found that, regardless of the shape of the rectangular cross-section, the strongest double dips become double nulls in the near-field region.

In this paper, a new approach to adaptive direction-of-arrival (DOA) estimation based upon a database retrieval technique is proposed. In this method, angles and signal powers are quantized, and a set of true correlation vectors of the array antenna input vectors for various combinations of the quantized angles and signal powers is stored in a database. The k-d tree is then selected as the data structure to facilitate range searching. Estimated a correlation vector, range searching is performed to retrieve several correlation vectors close to it from the k-d tree. The DOA and the signal power are estimated by taking the weighted average of angles and powers associated with the retrieved correlation vectors. Unlike the other high-resolution methods, this method requires no eigenvalue computation, thus allowing a fast computation. It is shown through simulation results that the processing speed of the proposed method is much faster than that of the root-MUSIC that requires the eigenvalue decomposition.

The subject of this study is to propose a new structure that can realize simultaneously high breakdown voltage and high packing density for both Nch low side switch and Pch high side switch in 200 V class rating. As the conventional techniques for the electric field relaxation, the structure of field plate, field ring and RESURF are well known, but these techniques are inadequate for the high packing density because they are the techniques in surface region. In order to conquer this subject, it is necessary to relax the electric field in the deep region. The electric field relaxation was investigated by device simulation. In the Nch low side switch the electric field is relaxed by buried oxide film in SOI structure. However, electric field relaxation cannot be realized only by adapting the SOI structure for Pch high side switch. Then we tried to insert an intrinsic layer between P-drift layer and the buried oxide film in order to spread the depletion layer in the deep region. This spread depletion layer by intrinsic layer and the depletion layer by field plate connect vertically, and the dosage of the ion implantation for drift layer can be set to two times higher than the case without intrinsic layer. As the results, it was revealed that the SOI structure with intrinsic layer is effective to achieve this subject. Furthermore, by fabricating both Nch low side switch and Pch high side switch on intrinsic SOI substrate, breakdown voltage more than 250 V were achieved.

Low luminous efficacy is one of the major drawbacks of PDPs, with the discharge being the predominant limiting factor. Numeric simulations granting deeper insight in the core processes of the discharge are presented and the key parameters influencing the plasma efficiency are examined.

In high-speed TDMA mobile communications, frequency-selective fading is a serious problem because a delay time difference between multipath signals is large in comparison with symbol duration. We have proposed a spatial-domain RAKE receiver using a multibeam adaptive antenna to reduce frequency-selective fading and to realize path-diversity. The multibeam adaptive antenna resolves multipath signals in the spatial domain, and combines array outputs. In this paper, we propose the application of MUSIC algorithm to estimation of the time delays of multipath signals to make the incident signals coincide with a common reference signal. Because the MUSIC algorithm can estimate the time delays accurately, the BER performance of the proposed scheme is improved. Furthermore, we propose weighting factors which easily realize the maximal-ratio combining.

Abnormal IDDQ (Quiescent VDD supply current) indicates the existence of physical damage in a circuit. Using this phenomenon, a CAD-based fault diagnosis technology has been developed to analyze the manufacturing yield of logic LSI. This method to detect the fatal defect fragments in several abnormalities identified with wafer inspection apparatus includes a way to separate various leakage faults, and to define the diagnosis area encircling the abnormal portions. The proposed technique progressively narrows the faulty area by using logic simulation to extract the logic states of the diagnosis area, and by locating test vectors related to abnormal IDDQ. The fundamental diagnosis way employs the comparative operation of each circuit element to determine whether the same logic state with abnormal IDDQ exists in normal logic state or not.

Mathematical proof for the equivalent edge currents for physical optics (POEECs) is given for plane wave incidence and the observer in far zone; the perfect accuracy of POEECs for plane wave incidence as well as the degradation for the dipole source closer to the scatterer is clearly explained for the first time. POEECs for perfectly conducting plates are extended to those for impedance plates.

We introduce the characteristics for continuous wave operation at room temperature of InGaN laser diodes fabricated on SiC substrates. The threshold current was 60 mA, the threshold voltage was 8.3 V, and the oscillation wavelength was 404.4 nm. The lifetime of the laser diodes with a constant light output of 1 mW at 25 was 57 hours. The heat dissipation of the devices mounted p-side-up on a stem without using a heat sink was shown to be as good as that of devices mounted p-side-down with an external heat sink, owing to the high thermal conductivity of SiC substrates.

Signal conservation logic (SCL) is a model of logic for the physical world subject to the matter conservation law. This letter proves that replication, complementary replication, and computational universality called elemental universality are equivalent in SCL. Since intelligence has a close relation to computational universality, the presented theorem may mean that life under the matter conservation law eventually acquires some kind of intelligence.

This paper proposes a novel universal line termination scheme for the ONUs (optical network units) of fiber-optic local access systems. Its main feature is that only low cost AD/DA converters for Hi-Fi audio are needed. Because audio AD/DA converters are insufficient for ISDN basic rate access (● 320kbaud) and cause waveform distortion, we develop a simple detection algorithm that does not use any equalizing filter. The algorithm can handle plural channels with one general purpose MPU (micro-processing unit). Based on this, a novel architecture for a fiber-optic local access system is presented that removes the MPUs from each optical network unit (ONU) and places them in the central office (CO). The proposed system yields a small, service-uniform ONU that supports a wide range of narrow-band services (POTS & ISDN) with no distinction. To realize this system at the lowest possible cost, a high-speed code division multiplexing (CDM) scheme with novel code word sets is developed.

This paper presents two man-machine reliability models. A system consists of one machine unit, one operator, and one event detecting monitor. The machine unit has three states, normal, abnormal, and failed. The event detecting monitor may fail in two ways. If a machine unit becomes abnormal, the event detecting monitor sends a signal, and the operator takes necessary actions. If the operator fails in the action in the cause of human error, the machine unit goes down. The condition of the operator is classified into two types, good and bad. The time to repair, and the human error rate both depend on the condition of the operator. The MTTF is obtained by using a Markov model and numerical computation. Furthermore, the optimal operating period which minimizes the overall cost is decided by using computer methods. Some numerical examples are shown.