Wavelength division multiplex (WDM) photonic networks are expected as the key for the global communication infrastructure. Recent increase of communication demands require large-scale highly-dense WDM systems, which results in severe requirements for optical cross-connect systems, such as cross-talk specification. In this paper, we propose a new optical path cross-connect system (OPXC) using matrix-WDM scheme, which makes it possible to reduce cross-talk requirements of WDM filters and to construct OPXC in modular structures. The matrix-WDM scheme is a concept of two-layered optical paths, which provides wavelength group managements in the fiber dispersion equalization and EDFA gain equalization.

A novel method is proposed to calculate the distributed coupling of dual-modes in a circular resonator. New theoretical expressions are devised to accumulate the infinitesimal coupling between orthogonal modes and their validity is justified by the FD-TD analysis and experiments. The distributed coupling concept of a circular disk resonator is applied to a square disk resonator to calculate its resonant frequency. We have fabricated two types of low-profile dual-mode square dielectric disk resonator BPF, using high dielectric constant material (εr = 93) having a dimension of 5 mm 5 mm 1 mm. The filter characteristics are explained by the transmission line circuit model.

We propose a real-time low-rate video compression algorithm using fixed-rate multi-stage hierarchical vector quantization. Vector quantization is suitable for mobile computing, since it demands small computation on decoding. The proposed algorithm enables transmission of 10 QCIF frames per second over a low-rate 29.2 kbps mobile channel. A frame is hierarchically divided by sub-blocks. A frame of images is compressed in a fixed rate at any video activity. For active frames, large sub-blocks for low resolution are mainly transmitted. For inactive frames, smaller sub-blocks for high resolution can be transmitted successively after a motion-compensated frame. We develop a compression system which consists of a host computer and a memory-based processor for the nearest neighbor search on VQ. Our algorithm guarantees real-time decoding on a poor CPU.

Wavelength Division Multiplex (WDM) photonic networks are expected as key for global communication infrastructure. The accurate measurement methods for AWG-MUX/DMUX are desirable for WDM network design. We measured a transfer function matrix of an AWG-MUX to find that polarization mode dispersion (PMD) and polarization dependent loss (PDL) shows the bandpass characteristics, which may limit the maximum size and the bit rate of the system. These bandpass characteristics of PMD and PDL are reproduced by a simple AWG-MUX model: The phase constant difference of 0.5% between orthogonal modes in arrayed waveguides is sufficient to obtain the measured passband characteristics of PMD and PDL. We find phase distribution difference between two orthogonal modes in the arrayed waveguide grating gives arise to complex PMD.

Wavelength Division Multiplex (WDM) photonic networks are expected as key for global communication infrastructure. The accurate measurement methods for AWG-MUX/DMUX are desirable for WDM network design. We measured a transfer function matrix of an AWG-MUX to find that polarization mode dispersion (PMD) and polarization dependent loss (PDL) shows the bandpass characteristics, which may limit the maximum size and the bit rate of the system. These bandpass characteristics of PMD and PDL are reproduced by a simple AWG-MUX model: The phase constant difference of 0.5% between orthogonal modes in arrayed waveguides is sufficient to obtain the measured passband characteristics of PMD and PDL. We find phase distribution difference between two orthogonal modes in the arrayed waveguide grating gives arise to complex PMD.

In this paper, a scheme to remove clouds and their shadows from remotely sensed images of Landsat TM over land has been proposed. The scheme uses the image fusion technique to automatically recognize and remove contamination of clouds and their shadows, and integrate complementary information into the composite image from multitemporal images. The cloud regions can be detected on the basis of the reflectance differences with the other regions. Based on the fact that shadows smooth the brightness changes of the ground, the shadow regions can be detected successfully by means of wavelet transform. Further, an area-based detection rule is developed in this paper and the multispectral characteristics of Landsat TM images are used to alleviate the computational load. Because the wavelet transform is adopted for the image fusion, artifacts are invisible in the fused images. Finally, the performance of the proposed scheme is demonstrated experimentally.

Three multiplicative algorithms for the floating-point divide operation are compared: the Newton-Raphson method, Goldschmidt's algorithm, and a naive method that simply calculates a form of the Taylor series expansion of a reciprocal. The series also provides a theoretical basis for Goldschmidt's algorithm. It is well known that, of the Newton-Raphson method and Goldschmidt's algorithm, the former is the more accurate while the latter is the faster on a pipelined unit. However, little is reported about the naive method. In this report, we analyze the speed and accuracy of each method and present the results of numerical tests, which we conducted to confirm the validity of the accuracy analysis. Basically, the comparison are made in the context of software implementation (e. g. , a macro library) and compliance with the IEEE Standard 754 rounding is not considered. It is shown that the naive method is useful in a realistic setting where the number of iterations is small and the method is implemented on a pipelined floating-point unit with a multiply-accumulate configuration. In such a situation, the naive method gives a more accurate result with a slightly lower latency, as compared with Goldschmidt's algorithm, and is much faster than but slightly inferior in accuracy to the Newton-Raphson method.

Rate monotonic traffic scheduling algorithm had been shown to be the optimal static priority assignment scheme. The system model studied in can be considered (although not realistic) as a preemptive multiplexer which accepts constant bit rate connections that generate packets periodically. The multiplexer adopts a service discipline such that a lower priority packet can be preempted at any stage by a higher priority one without any loss. The constraint is that every packet has to complete its service before the arrival of its succeeding packet generated by the same connection. In this paper, we study the schedulability problem of rate monotonic schedulers for a fixed-length packet switched network such as the ATM network. A necessary and sufficient condition for a set of m constant bit rate connections to be rate monotonic schedulable is first derived and then utilized to design fast admission control algorithms. One of our algorithms computes in advance the minimum period of a connection which can be accepted given a set of existing connections.

Connector contact resistance may become unstable if fretting occurs. Such motions result in the formation of insulating oxides on the surface of base metal contacts or organic polymers on contacts made of platinum group metals. These degradations are termed fretting corrosion and frictional polymerization, respectively. Motion may be caused by external vibration or fluctuating temperature. The lower the frequency of movement, the fewer the number of cycles to contact failure. Increasing the contact normal load or reducing the amplitude of movement may stabilize the connection. Tin and palladium and many of their alloys are especially prone to fretting failure. Tin mated to gold is worse than all-tin contacts. Gold and high gold-silver alloys that are softer when mated to palladium stabilize contact resistance since these metals transfer to the palladium during fretting; but flash gold coatings on palladium and palladium nickel offer marginal improvement for the gold often quickly wears out. Dissimilar metal contact pairs show behaviors like that of the metal which predominates on the surface by transfer. Contact lubricants can often prevent fretting failures and may even restore unlubricated failed contacts to satisfactory service.

This paper proposed the method as an estimation on the size of discharge spots through observation on traces after the discharge arose in circumstances gases mixed hydrocarbon gas. Namely, the circular carbonaceous deposit and the carbonaceous heap are observed on cathode and anode surface, respectively, after the short gap discharge arises in N2+NO+CH4 gases. The current density, which is the normal conversion current density, is calculated from the size of the trace of discharge and its value is about 1.010-9 A/(cm2 Pa2) in case that the concentration of CH4 is 0.6%. The value is about 1/5 of values that are reported in the former articles and is reasonable one.

Simple expressions for constriction resistance of multitude conducting spots were analytically formulated by Greenwood. These expressions, however, include some approximations. Nakamura presented that the constriction resistance of one circular spot computed using the BEM is closed to Maxwell's exact value. This relative error is only e=0. 00162 [%]. In this study, the constriction resistances of two, five and ten conducting spots are computed using the boundary element method (BEM), and compared with those obtained using Greenwood's expressions. As the conducting spots move close to each other, the numerical deviations between constriction resistances computed using Greenwood's expressions and the BEM increase. As a result, mutual resistance computed by the BEM is larger than that obtained from Greenwood's expressions. The numerical deviations between the total resistances computed by Greenwood's expressions and that by the BEM are small. Hence, Greenwood's expressions are valid for the total constriction resistance calculation and can be applied to problems where only the total resistance of two contact surfaces, such as a relay and a switch, is required. However, the numerical deviations between the partial resistances computed by Greenwood's expression and that by the BEM are very large. The partial resistance calculations of multitude conducting spots are beyond the applicable range of Greenwood's expression, since Greenwood's expression for constriction resistance of two conducting spots is obtained by assuming that the conducting spots are equal size. In particular, the deviation between resistances of conducting spots, which are close to each other, is very large. In the case of partial resistances which are significant in semiconductor devices, Greenwood's expressions cannot be used with high precision.

Decision trees are used as a convenient means to explain given positive examples and negative examples, which is a form of data mining and knowledge discovery. Standard methods such as ID3 may provide non-monotonic decision trees in the sense that data with larger values in all attributes are sometimes classified into a class with a smaller output value. (In the case of binary data, this is equivalent to saying that the discriminant Boolean function that the decision tree represents is not positive. ) A motivation of this study comes from an observation that real world data are often positive, and in such cases it is natural to build decision trees which represent positive (i. e. , monotone) discriminant functions. For this, we propose how to modify the existing procedures such as ID3, so that the resulting decision tree represents a positive discriminant function. In this procedure, we add some new data to recover the positivity of data, which the original data had but was lost in the process of decomposing data sets by such methods as ID3. To compare the performance of our method with existing methods, we test (1) positive data, which are randomly generated from a hidden positive Boolean function after adding dummy attributes, and (2) breast cancer data as an example of the real-world data. The experimental results on (1) tell that, although the sizes of positive decision trees are relatively larger than those without positivity assumption, positive decision trees exhibit higher accuracy and tend to choose correct attributes, on which the hidden positive Boolean function is defined. For the breast cancer data set, we also observe a similar tendency; i. e. , positive decision trees are larger but give higher accuracy.

We propose a new method of progressive transmission of continuous tone images using multi-level error diffusion method. Assuming that the pixels are ordered and the error is diffused to later pixels, multi-level error-diffused images are resolved into a multiple number of bit planes. In an image with 8 bits per pixel, the number of the bit planes that we construct is 9, and the 2-level, 3-level, 5-level,, error-diffused images are produced by a successive use of the bit planes. The original image is finally achieved precisely.

This study presents a method that can be used to manage individual pieces of information in large scale distributed geographic information systems (GIS). In a distributed GIS, ordinary users usually cannot alter any of the contents on the server. The method in this study can be used to alter the content or add individual datums onto these types of non-write-permitted data sets. The authors have called it a 'Geographic Differential Script File' (GDSF). A client creates a GDSF, which contains private information that is to be added onto the served data. The client keeps this file on a local disk. When the user employs the data, he applies the differential script sequence onto the downloaded data in order to retrieve the information. GDSF is a collection of graphic operation commands which insert and delete objects as well as modify operations. GDSF also contains modifications of the attribute information of geographic entities. This method can also be used to revise information that is published on ROM media, e. g. CD-ROM or DVD-ROM, as well as in a distributed environment. In this paper, the method and results of applying it are presented.

Object-Oriented database systems (OODBMS) are well known for modeling complex and dynamic application domains. Typically OODBMS have to handle large and complex structured objects whose values and structures can change frequently. Consequently there is a high demand for systems which support temporal and versioning features in both objects (or database population) and schema. This paper presents a mechanism for accessing the temporal versioned objects stored in the database which supports schema versioning. The results shown here can be considered as a value-added extension of our model called TVOO described in detail in [1] and [2]. In contrast to conventional database models, in TVOO objects and classes are not physically discarded from the database after they are modified or deleted. They are time dependent and the history of the changes which occur on them are kept as Version hierarchies. Therefore our model enriches the database environment with temporal and versioning features. Also, an access mechanism which makes it possible to access any object under any schema version is defined in such a way that not only objects created under old versions of schema classes can be accessed from new versions, but also objects created by new schema class versions can be accessed from old versions of the respective class.

A zerotree image-coding scheme is introduced that effectively exploits the inter-scale self-similarities found in the octave decomposition by a wavelet transform. A zerotree is useful for efficiently coding wavelet coefficients; its efficiency was proved by Shapiro's EZW. In the EZW coder, wavelet coefficients are symbolized, then entropy-coded for further compression. In this paper, we analyze the symbols produced by the EZW coder and discuss the entropy for a symbol. We modify the procedure used for symbol-stream generation to produce lower entropy. First, we modify the fixed relation between a parent and children used in the EZW coder to raise the probability that a significant parent has significant children. The modified relation is flexibly modified again based on the observation that a significant coefficient is more likely to have significant coefficients in its neighborhood. The three relations are compared in terms of the number of symbols they produce.

In this paper, we describe a routing method for path on SDH Network with digital cross-connect control, which is implemented in an automated path provisioning function. Excessive concentration of assigned time slots at particular links results in longer restoration time, which is needed to switch or reroute paths on failure link. We propose an optimization method to provision the shortest route considering deconcentration of time slots assigned on each link. After defining LP-based formulation for path routing, we carried out computer simulation study for restoration performance on sample networks, assuming each restoration process for paths on failure link is executed one after another. Mean restoration time by our proposed method has reduced to a great extent compared to a basic routing method. It has been proven that the proposed method can realize effective use of resources and faster restoration time, and can be utilized in commercial systems.

This paper studies the application of a media synchronization mechanism to the interleaved transmission of video and audio specified by the H.223 Annex in PHS. The media synchronization problem due to network delay jitters in the interleaved transmission has not been discussed in either the Annex or any related standards. The slide control scheme, which has been proposed by the authors, is applied to live media. We also propose a QOS control scheme to control both quality of the media synchronization and that of the transmission delay. Through simulation we confirm the effectiveness of the slide control scheme and the QOS control scheme in the interleaved transmission.

For transmission of video signals, it is important that the system allows a certain degree of flexibility in bit rate as well as quality, depending upon the requirements of media and channel conditions. In this paper, we discuss the hierarchical transmission of Huffman code using multi-code/multi-rate DS/SS system to realize flexible transmission. We first discuss and show that the structure of Huffman code tree directly expresses hierarchical structure, and that parallel transmission of Huffman code can achieve hierarchical transmission. By assigning different transmission data rate to the bits in each stratum, it is possible to transmit different amount of information from each stratum. Further, we show the quality of each of the stratum can easily controlled by an appropriate power distribution to each parallel transmission branch.

A novel image improving algorithm for compressed image sequence by merging a reference image is presented. A high quality still image of the same scene is used as a reference image. The degraded images are improved by merging reference image with them. Merging amount is controlled by the resemblance between the reference image and compressed image after applying motion compensation. Experiments conducted on sequences of JPEG images are given. This technique does not need a prior knowledge of compression technique so it can be applied to other techniques as well.