An optimum placement of capacitors in the layout of Switched Capacitor networks is presented in this paper. The performance of integrated circuits is generally degraded by perturbations of physical parameters of each device and parasitic strays. The optimality imposed in this paper is the minimum degradation of a transfer function with respect to the distribution of capacitance values. A capacitance value per unit area fabricated on a LSI chip is assumed to be perturbed linearly with its x and y coordinates. The capacitor placement is determined so that the effects of such perturbation of capacitances to the overall transfer-characteristics are canceled. As the result, input-output transfer function will stay nominal under the linear perturbation model with arbitrary gradients.

A Monte Carlo calculation is performed to examine the transport coefficients of the electron gas under an inhomogeneous electric field. The expressions constructed from the M. C. results are then incorporated into the hydrodynamic formulation to calculate the internal characteristics of a silicon BJT device. The calculated results agree well with the Monte Carlo prediction.

This paper proposes a technique for designing two-dimensional (2-D) digital filters approximating an arbitrary magnitude function. The technique is based on 2-D spectral factorization and rational approximation of the complex exponential function. A 2-D spectral factorization technique is used to obtain a recursively computable and stable system with nonsymmetric half-plane support from the desired 2-D magnitude function. Since the obtained system has an exponential function type transfer function and cannot be realized directly in a rational form, a class of realizable 2-D digital filters is introduced to approximate the exponential type transfer function. This class of filters referred to as two-dimensional log magnitude approximation (2-D LMA) filters can be viewed as an extension of the class of 1-D LMA filters to the 2-D case. Filter coefficients are given by the 2-D complex cepstrum coefficients, i.e., the inverse Fourier transform of the logarithm of the given magnitude function, which can be efficiently computed using 2-D FFT algorithm. Consequently, computation of the filter coefficients is straightforward and efficient. A simple stability condition for the 2-D LMA filters is given. Under this condition, the stability of the designed filter is guaranteed. Parallel implementation of the 2-D LMA filters is also discussed. Several examples are presented to demonstrate the design capability.

The development of computers capable of handling complex objects requires nonverbal interfaces that can bidirectionally mediate nonverbal communication including the gestures of both people and computers. Nonverbal expressions are poweful media for enriching and facilitating humancomputer interaction when used as interface languages. Four gestural modes are appropriate for human-computer interaction: the sign, indication, illustration and manipulation modes. All these modes can be conveyed by a generalized gesture interface that has specific processors for each mode. The basic component of the generalized gesture interface, a gesture dictionary, is proposed. The dictionary can accept sign and indicating gestures in which postures or body shapes are significant, pass their meaning to a computer and display gestures from the computer. For this purpose it converts body shapes into gestural codes by means of two code systems and, moreover, it performs bidirectional conversions of several gesture representations. This dictionary is applied to the translation of Japanese into sign language; it displays an actor who speaks the given Japanese sentences by gesture of sign words and finger alphabets. The performance of this application confirms the adequacy and usefulness of the gesture dictionary.

In speech output expected as an ideal man-machine interface, there exists an important issue on emotion production in order to not only improve its naturalness but also achieve more sophisticated speech interaction between man and machine. Speech has two aspects, which are prosodic information and phonetic feature. For the purpose of application to natural and high quality speech synthesis, the role of prosody in speech perception has been studied. In this paper, prosodic components, which contribute to the expression of emotions and their intensity, are clarified by analyzing emotional speech and by conducting listening tests of synthetic speech. The analysis is performed by substituting the components of neutral speech (i.e., one with no particular emotion) with those of emotional speech preserving the temporal correspondence by means of DTW. It has been confirmed that prosodic components, which are composed of pitch structure, temporal structure and amplitude structure, contribute to the expression of emotions more than the spectral structure of speech. The results of listening tests using prosodic substituted speech show that temporal structure is the most important for the expression of anger, while all of three components are much more important for the intensity of anger. Pitch structure also plays a significant role in the expression of joy and sadness and their intensity. These results make it possible to convert neutral utterances into utterances expressing various emotions. The results can also be applied to controlling the emotional characteristics of speech in synthesis by rule.

The behavior of TM-wave scattering from a dielectric-loaded semicircular trough in a conducting half-space is investigated. The dielectric loading is made of a circular cylinder which lies in a semi-circular trough in the perfectly conducting plane. The formulation is numerically evaluated to investigate the scattered field pattern for various dielectric loading conditions. It is found that the scattering patterns exhibit the resonant behavior due to both of the concave surface contour and the dielectric loading.

Low-field mobilities and velocity versus electric field relations are among the key input parameters for drift-diffusion simulations of field-effect and bipolar transistors. For example, most device simulations that treat scattering from ionized impurities contain mobilities or velocity versus field relations based on the Born approximation (BA). The BA is insensitive to the sign of the charged impurity and is especially poor for ionized impurity scattering because of the relatively strong scattering of long-wavelength carriers, which have low energies, and therefore violate the validity condition for the BA. Such carriers occur at high symmetry points in the Brillouin zone and are critical for device behavior. There has been a tendency in the past to assume that majority and minority mobilities are equal. This assumption can lead to incorrect interpretations of device data and thereby misleading design strategies based on such simulations. We have calculated the majority electron and minority hole mobilities in GaAs at 300 K for donor densities between 51016 and 11019 cm-3 and the majority hole and minority electron mobilities for acceptor densities between 51016 and 11020 cm-3. We have included all the important scattering mechanisms for GaAs: acoustic phonon, polar optic phonon, nonpolar optic phonon (holes only), piezoelectric, ionized impurity, carrier-carrier, and plasmon scattering. The ionized impurity and carrier-carrier scattering processes have been calculated with a quantum mechanical phase-shift analysis to obtain more accurate matrix elements for these two scattering mechanisms. We compare the total scattering rate for majority electrons due to ionized impurities based on exact phase shifts and on the BA used by Brooks-Herring. We also present additional data that show the differences between the exact phase-shift analyses and the BA for majority electron scattering rates as functions of carrier energy and scattering angle. These results show that the calculated low-field mobilities are in good agreement with experiment, but they predict that at high dopant densities minority mobilities should increase with increasing dopant density for a short range of densities. This effect occurs because of the reduction of plasmon scattering and the removal of carriers from carrier-carrier scattering because of the Pauli exclusion principle. Some recent experiments support this finding. These results are important for device modeling because of the need to have reliable values for the minority mobilities and velocity-field relations.

In the coming information society, people will have to be engaged in the information environment for their everyday activities. We propose a new design concept of Contextual Metaphors for constructing a human interface. It introduces multiple metaphors and makes it easy for people to directly participate into the environment. The major part of the concept is to provide good contextual support for their everyday activities with a layered design of three cognitively distinct concepts. They are the use of everyday based object metaphors, the task oriented assignment of each of metaphors to system functions and the scenario based sequencings of scenes of those metaphors. A prototyping of the concept showed effectiveness of the concept together with some remarks on the actual design.

We have developed an efficient general-purpose two-dimensional device simulation system which consists of a solver, and pre- and post-processors. This system can easily handle any complicated device having a non-rectangular shape. It can also be applied to compound semiconductor devices with heterojunctions, including optical devices such as laser diodes. In order to handle any device, a new program for construction of device geometry is developed as a preprocessor. It has an efficient graphic interface to reduce the time required to input data for simulations, which is a very time consuming task for complicated devices. A new efficient data structure representing device geometry is introduced in the program. During postprocessing, any physical quantity can be displayed on the multi-window screen. In addition, a general-purpose solver for basic semiconductor equations is implemented in the system. Using this system, any device can be successfully analyzed in a unified manner and the turn-around time for the simulation is significantly reduced.

Proposed here is an internal representation and mapping method for multimedia information in which retrieval is based on the impression documents desired to make. A user interface design for a system using this method is also proposed. The proposed internal representation and mapping method represents each desired document impression as an axis in a semantic space. Documents are represented as points in the space. Queries are represented as subspaces. The proposed user interface design employs a method of visual presentation of the semantic space. Pictorial examples are given to illustrate the range of impressions represented by the axes. The relations between the axes are represented by dispersion diagrams for the documents stored in the document base. With this method, the user can intuitively decide the appropriate subspace for his needs and can specify it directly. For evaluation purposes, a prototype system has been developed. An image retrieval experiment shows that the proposed internal representation and mapping method and the user interface design provide effective tools for information retrieval.

In two-dimensional simulation of thin-base RHET, we combined three different simulation methods--the Schrödinger equation, the Monte Carlo simulation, and two-dimensional device simulation within a drift and diffusion model. We found that, in the thin-base RHET, the potential distribution differs from that expected from the thick-base RHET. In the thin-base RHET, the potential of the intrinsic base region does not equal that of the base electrode because the intrinsic base region is depleted and the negative emitter voltage (VEB0) raises the potential of both the intrinsic base and the nondoped region under the intrinsic base. There are also modified by the collector voltage. We also show emitter current-voltage characteristics, transfer ratio, and transit time calculated using this method and compare them with results for the one-dimensional case.

In order to realize flexible interaction control between user and information processing system, a special purpose user model is proposed on the basis of the knowledge-based design method of user interface system. The user-specific control knowledge of user-oriented interface environment is represented explicitly in the user model and utilized in the user-oriented interface system. Furthermore, the framework of user-oriented interface environment based on this user model called user-model-driven interface system, is proposed as one of user-adaptive human interface systems, in this paper. According to the proposed framework, a prototype system of the user-model-driven interface system is implemented and the facility of user-specific interaction control based on the user model has been verified with respect to an electronic mail handling task.

The new notion of "multiuser interface", an interface for groups working together in a shared workspace, originated from the expansion of CSCW research and the spread of the groupware concept. This paper introduces a new multiuser interface design approach based on the translucent video overlay technique. This approach was realized in the multimedia desktop conference system Team WorkStation. Team WorkStation demonstrates that this translucent video overlay technique can achieve two different goals: (1) fused overlay for realizing the open shared workspace, and (2) selective overlay for effectively using limited screen space. This paper first describes the concept of open shared workspace and its implementation based on the fused overlay technique. The shared work window of Team-WorkStation is created by overlaying translucent individual workspace images. Each video layer is originally physically separated. However, because of the spatial relationships among marks on each layer, the set of overlaid layers provides users with sufficient semantics to fuse them into one image. The usefulness of this cognitive fusion was demonstrated through actual usage in design sessions. Second, the problem of screen space limitation is described. To solve this problem, the idea of ClearFace based on selective overlay is introduced. The ClearFace idea is to lay translucent live face video windows over a shared work window. Through the informal observations of experimental use in design sessions, little difficulty was experienced in switching the focus of attention between the face images and the drawing objects. The theory of selective looking accounts for this flexible perception mechanism. Although users can see drawn objects behind a face without difficulty, we found that users hesitate to draw figures or write text over face images. Because of this behavior, we devised the "movable" face window strategy.

In this paper, the eigen-function weighted boundary integral epuation method (EW-BIEM) is applied to analyze the dispersion characteristics of various planar transmission lines with finite metallization thickness, such as the micro-strip lines, conductor-backed coplanar waveguides and micro-coplanar striplines for the first time. Due to the choice of the eigen-functions as weighted functions instead of Green's function, the computational time is shortened to a great extent and the singularity problems are also avoided. The difficulty in treating strip thickness can be overcome by considering the 90 edge on the strip as a 90 circular arc whose radius tends to zero. The computational results clearly demonstrate that the effects of finite strip thickness on the propagation properties of these transmission lines can be treated easily and efficiently with this method.

Sound field telecommunication describes a voice communication system, intended to implement a virtual meeting, in which participants at distant sites experience the sensation of sharing a single room for conversation. Binaural synthesis reconstructs the sound propagation pattern of a particular room or environment in the vicinity of each ear, which seems appropriate for a personal multimedia environment. Localization cues in spatial hearing comprise both the sink's transfer function and source attenuation. Sink directional cues are captured by binaural head related transfer functions (HRTFs). Source attenuation is modeled as a frequency-independent function of the direction, dispersion, and distance of the source, capturing sensitivity, amplification, and mutual position. Audio windows, aural analogues of video windows, can be thought of as a user interface to binaural sound presentation for a teleconferencing system. Exocentric representation of audio window entities allows manipulation of all teleconferees in a projected egalitarian medium. We are implementing a system that combines dynamically selected HRTFs with dynamically determined source and sink position, azimuth, focus, and size parameters, controlled via iconic manipulation in a graphical window. With such an interface, users may arrange a virtual conference environment, steering the virtual positions of teleconferees.

This paper describes a unified process and device simulation system named P &D Workbench (Process and Device Workbench). The P &D Workbench is an EWS (Engineering Work Station) based system which is connected with MFCs (Main Frame Computers) via networks and can easily execute 2-dimensional process, device, topography and capacitance simulations. Since the P &D Workbench has a supervisor, data-base and excellent user interface using Japanese menu functions and mouse operations, a handling time can be dramatically reduced. The supervisor controls the simulation sequence and file transfer, and manages jobs and files both on EWSs and MFCs, so that plural simulations of splitting conditions can be automatically executed. Short TAT (Turn Around Time) is achieved by selecting an appropriate platform depended on a problem size and MFCs' CPU loads. The effects of the P &D Workbench are shown in examples applied to the development of a 4M-DRAM.

A spherical-harmonics expansion method is used to find approximate numerical solutions of the Boltzmann Transport Equation in the homogeneous case. Acoustic and optical phonon scattering, ionized impurity scattering as well as an energy band structure fitting the silicon density of states up to 2.6 eV above the conduction-band edge are used in the model. Comparisons with Monte Carlo data show excellent agreement, and prove that detailed information on the high-energy tail of the distribution function can be obtained at very low cost using this methodology.

A new monolithic transmit-receive GaAs FET switch has been developed, named the FET series-shunt connected TR switch and capable of switching high rf transmitting power. Both insertion loss and isolation limitations of this type TR switch have been analyzed using the switching cutoff frequency of the control FET, and the formula for calculating the rated power is provided. A unique feature of this switch is that the power handling of the switch is not limited by the FET gate break-down voltage but is limited by the saturation current, so higher handling power capability is available by using FETs with a larger gate periphery. A design example of the TR switch at a rated power of 8 W in the transmit mode as well as the results of an X band switch are presented.

We present schemes for disseminating information in the n-dimensional hypercube with some faulty nodes/edges. If each processor can send a message to t neighbors at each round, and if the number of faulty nodes/edges is k(kn), then this scheme will broadcast information from any source to all destinations within any consecutive n+[(k+l)/t] rounds. We also discuss the case where the number of faulty nodes is not less than n.

To realize a highly efficient small antenna, high-Tc superconductors are adopted to fabricate both a self-resonating helical radiator and a quarter-wave matching circuit. The actual gain and bandwidth measured at 478 MHz using a 1/45-wavelength radiator were respectively 1.5 dBi and 0.35%, indicating that this type of antenna has a high radiation efficiency and a fairly wide bandwidth. It is also confirmed through experiments and theoretical simulations that a decrease in the surface resistance of the radiator more effectively improves the radiation efficiency than a decrease in the surface resistance of the matching circuit.