In a network with dense deployment of multiple-input multiple-output (MIMO) small cells, coverage overlap between the small cells produces intercell-interference, which degrades system capacity. This paper proposes an intercell-interference management (IIM) scheme that aims to maximize system capacity by using both power control for intercell-interference coordination (ICIC) on the transmitter side and interference cancellation (IC) on the receiver side. The power control determines transmit power levels at the base stations (BSs) by employing a neural network (NN) algorithm over the backhaul. To further improve the signal to interference plus noise ratio (SINR), every user terminal (UT) employs a multiuser detector (MUD) as IC. The MUD detects not only the desired signals, but also some interfering signals to be cancelled from received signals. The receiver structure consists of branch metric generators (BMGs) and MUD. BMGs suppress residual interference and noise in the received signals by whitening matched filters (WMFs), and then generate metrices by using the WMFs' outputs and symbol candidates that the MUD provides. On the basis of the metrices, the MUD detects both the selected interfering signals and the desired signals. In addition, the MUD determines which interfering signals are detected by an SINR based replica selection algorithm. Computer simulations demonstrate that the SINR based replica selection algorithm, which is combined with channel encoders and packet interleavers, can significantly improve the system bit error rate (BER) and that combining IC at the receiver with NN power control at the transmitter can considerably increase the system capacity. Furthermore, it is shown that choosing the detected interfering signals by the replica selection algorithm can obtain system capacity with comparable loss and less computational complexity compared to the conventional greedy algorithm.

We have proposed composite films composed of a molecular-aligned polymer and liquid crystal (LC) for substrate-free liquid crystal displays with high-contrast images. We successfully controlled the molecular alignment of the LC and formed molecular-aligned LC droplets in the polymer by controlling the fluidity of the LC/monomer mixture and the curing rate of the monomer.

We developed flexible LC devices using coat-debond polyimide substrates with a low birefringence and etched post spacers, and clarified that flexible LCDs using post spacers with small spacer distance have a high flexibility without degradation of the image quality. This result ensured the feasibility of flexible LCDs using coat-debond method.

When using a wireless capsule endoscope (WCE), it is important to know WCE location. In this paper, we focus on a time of arrival (TOA)-based localization technique, as it has better location estimation performance than other radio frequency-based techniques. However, the propagation speed of signals transmitted from inside of a human body varies depending on which biological tissues they pass through. For this reason, almost all of conventional TOA-based methods have to obtain the relative permittivity of the passed biological tissues or the propagation speed beforehand through another measurement system, i.e., magnetic resonance imaging (MRI) or computational tomography (CT). To avoid such troublesome pre-measurement, we propose a hybrid TOA/received signal strength indicator (RSSI)-based method, which can simultaneously estimate the WCE location and the averaged relative permittivity of the human body. First, we derive the principle of RSSI-based relative permittivity estimation from an finite difference time domain (FDTD) simulation. Second, we combine the TOA-based localization and the proposed RSSI-based relative permittivity estimation, and add them to the particle filter tracking technique. Finally, we perform computer simulations to evaluate the estimation accuracy of the proposed method. The simulation results show that the proposed method can accomplish good localization performance, 1.3mm, without pre-measurement of the human body structure information.

In this letter, we propose a novel framework to estimate the joint distribution of multiple Local Binary Patterns (LBPs). Multiple LBPs extracted from the same central pixel are first encoded using handcrafted encoding schemes to achieve rotation invariance, and the outputs are further encoded through a pre-trained Restricted Boltzmann Machine (RBM) to reduce the dimension of features. RBM has been successfully used as binary feature detectors and the binary-valued units of RBM seamlessly adapt to LBP. The proposed feature is called RBM-LBP. Experiments on the CUReT and Outex databases show that RBM-LBP is superior to conventional handcrafted encodings and more powerful in estimating the joint distribution of multiple LBPs.

Automatic detection of immunoreactive areas in fluorescence microscopic images is becoming a key technique in the field of biology including neuroscience, although it is still challenging because of several reasons such as low signal-to-noise ratio and contrast variation within an image. In this study, we developed a new algorithm that exhaustively detects co-localized areas in multi-channel fluorescence images, where shapes of target objects may differ among channels. Different adaptive binarization thresholds for different local regions in different channels are introduced and the condition of each segment is assessed to recognize the target objects. The proposed method was applied to detect immunoreactive spots that labeled membrane receptors on dendritic spines of mouse cerebellar Purkinje cells. Our method achieved the best detection performance over five pre-existing methods.

Many important problems in communication networks, transportation networks, and logistics networks are solved by the minimization of cost functions. In general, these can be complex optimization problems involving many variables. However, physicists noted that in a network, a node variable (such as the amount of resources of the nodes) is connected to a set of link variables (such as the flow connecting the node), and similarly each link variable is connected to a number of (usually two) node variables. This enables one to break the problem into local components, often arriving at distributive algorithms to solve the problems. Compared with centralized algorithms, distributed algorithms have the advantages of lower computational complexity, and lower communication overhead. Since they have a faster response to local changes of the environment, they are especially useful for networks with evolving conditions. This review will cover message-passing algorithms in applications such as resource allocation, transportation networks, facility location, traffic routing, and stability of power grids.

Power analysis exploits the leaked information gained from cryptographic devices including, but not limited to, power consumption generated during cryptographic operations. If a number of power traces are given to an attacker, it is possible to reveal a cryptographic key efficiently, sometimes within a few minutes, using various statistical methods. In this sense, software countermeasures including higher-order masking or software dual-rail with precharge logic have been proposed to produce randomized or constant power consumption during the key-dependent operations. However, they have critical disadvantages in terms of computational time and security. In this paper, we propose a new solution called “one-bit to four-bit dual conversion” for enhanced security against power analysis. For an exemplary embodiment of the proposed scheme, we apply it to an AES implementation and demonstrate its security and performance. The overall costs are approximately 148KB memory space for the lookup tables and about a 3-fold increase in execution time than the straightforward implementation of AES.

A broadband miniature GaAs p-HEMT MMIC Doherty power amplifier (DPA) with a series connected load operating at the C band has been developed. To minimize the circuit size, a lumped-element load modulation circuit without a quarter wavelength transmission line has been introduced to MMIC technology. For both an input and output power divider/combiner circuit, two baluns are used to reduce the length of the phase adjuster circuit without causing instability. An inherent DPA instability problem related with the degenerated sub-harmonic frequency has been analyzed with the S and T parameters of DPA circuit components, resulting in a novel stabilized circuit. The developed stabilized DPA delivered a maximum power added efficiency (PAE) of 49% and a maximum output power of 23.4dBm. Greater than 40% PAE below a 10-dB input back-off from a saturated output power is obtained for a frequency range of 6.1 to 6.8GHz.

This paper presents a wideband digital predistortion (DPD) architecture suitable for wideband wireless systems, such as IEEE 802.11ad/WiGig, where low oversampling ratio of the digital-to-analog converter (DAC) is a bottleneck for available linearization bandwidth. In order to overcome the bandwidth limitation in the conventional DPD, the proposed DPD introduces a complex coefficient filter in the DPD signal processing, which enables it to achieve asymmetric linearization. This approach effectively suppresses one side of adjacent channel leakages with twice the bandwidth as compared to the conventional DPD. The concept is verified through system simulation and measurements. Using a scaled model of a 2 GHz RF carrier frequency, the measurement shows a 4.2 dB advantage over the conventional DPD in terms of adjacent channel leakage.

With the surge of social media platform, users' profile information become treasure to enhance social network services. However, attributes information of most users are not complete, thus it is important to infer latent attributes of users. Contemporary attribute inference methods have a basic assumption that there are enough labeled data to train a model. However, in social media, it is very expensive and difficult to label a large amount of data. In this paper, we study the latent attribute inference problem with very small labeled data and propose the SRW-COND solution. In order to solve the difficulty of small labeled data, SRW-COND firstly extends labeled data with a simple but effective greedy algorithm. Then SRW-COND employs a supervised random walk process to effectively utilize the known attributes information and link structure of users. Experiments on two real datasets illustrate the effectiveness of SRW-COND.

This paper is a sequel to [4] in which the system is generalized by including unknown time-varying delays in both states and input. Regarding the controller, the design of adaptive gain is simplified by including only x1 and u whereas full states are used in [4]. Moreover, it is shown that the proposed controller is also applicable to a class of upper triangular nonlinear systems. An example is given for illustration.

In 3GPP (3rd Generation Partnership Project) LTE (Long Term Evolution) systems, when HARQ (Hybrid Automatic Repeat request) retransmission is invoked, the data at the transmitter are retransmitted randomly or sequentially regardless of their relationship to the wrongly decoded data. Such practice is inefficient since precious transmission resources will be spent to retransmit data that may be of no use in error correction at the receiver. This paper proposes an incremental redundancy HARQ scheme based on Error Position Estimating Coding (ePec) and LDPC (Low Density Parity Check Code) channel coding, which is called ePec-LDPC HARQ. The proposal is able to feedback the wrongly decoded code blocks within a specific MAC (Media Access Control) PDU (Protocol Data Unit) from the receiver. The transmitter gets the feedback information and then performs targeted retransmission. That is, only the data related to the wrongly decoded code blocks are retransmitted, which can improve the retransmission efficiency and thus reduce the retransmission overload. An enhanced incremental redundancy LDPC coding approach, called EIR-LDPC, together with a physical layer framing method, is developed to implement ePec-LDPC HARQ. Performance evaluations show that ePec-LDPC HARQ reduces the overall transmission resources by 15% compared to a conventional LDPC HARQ scheme. Moreover, the average retransmission times of each MAC PDU and the transmission delay are also reduced considerably.

A novel method for illumination-invariant face representation is presented based on the orthogonal decomposition of the local image structure. One important advantage of the proposed method is that image gradients and corresponding intensity values are simultaneously used with our decomposition procedure to preserve the original texture while yielding the illumination-invariant feature space. Experimental results demonstrate that the proposed method is effective for face recognition and verification even with diverse lighting conditions.

Considering that existing clutter cancellation methods process information either in the time domain or in the spatial domain, this paper proposes a new clutter cancellation method that utilizes joint multi-domain information for passive radar. Assuming that there is a receiving array at the surveillance channel, firstly we propose a multi-domain information clutter cancellation model by constructing a time domain weighted matrix and a spatial weighted vector. Secondly the weighted matrix and vector can be updated adaptively utilizing the constant modulus constraint. Finally the weighted matrix is derived from the principle of optimal filtering and the recursion formula of weighted vector is obtained utilizing the Gauss-Newton method. Making use of the information in both time and spatial domain, the proposed method attenuates the noise and residual clutter whose directions are different from that of the target echo. Simulation results prove that the proposed method has higher clutter attenuation (CA) compared with the traditional methods in the low signal to noise ratio condition, and it also improves the detection performance of weak targets.

In this paper, we present the channel estimation (CE) problem in the orthogonal frequency division multiplexing system with offset quadrature amplitude modulation (OFDM/OQAM). Most CE methods rely on the assumption of a low frequency selective channel to tackle the problem in a way similar to OFDM. However, these methods would result in a severe performance degradation of the channel estimation when the assumption is not quite inaccurate. Instead, we focus on estimating the channel impulse response (CIR) itself which makes no assumption on the degree of frequency selectivity of the channels. After describing the main idea of this technique, we present an iterative CE method that does not require zero-value guard symbols in the preamble and consequently improves the spectral efficiency. This is done by the iterative estimation of the unknown transmitted data adjacent to the preamble. Analysis and simulation results validate the efficacy of the proposed method in multipath fading channels.

The dark channel prior (DCP)-based image dehazing method has been widely used for enhancing visibility of outdoor images. However, since the DCP-based method assumes that the minimum values within local patches of natural outdoor haze-free images are zero, underestimation of the transmission is inevitable when the assumption does not hold. In this letter, a novel iterative image dehazing algorithm is proposed to compensate for the underestimated transmission. Experimental results show that the proposed method can improve the dehazing performance by increasing the transmission estimation accuracy.

We propose a novel method for estimating acoustic scenes such as user activities, e.g., “cooking,” “vacuuming,” “watching TV,” or situations, e.g., “being on the bus,” “being in a park,” “meeting,” utilizing the information of acoustic events. There are some methods for estimating acoustic scenes that associate a combination of acoustic events with an acoustic scene. However, the existing methods cannot adequately express acoustic scenes, e.g., “cooking,” that have more than one subordinate category, e.g., “frying ingredients” or “plating food,” because they directly associate acoustic events with acoustic scenes. In this paper, we propose an acoustic scene estimation method based on a hierarchical probabilistic generative model of an acoustic event sequence taking into account the relation among acoustic scenes, their subordinate categories, and acoustic event sequences. In the proposed model, each acoustic scene is represented as a probability distribution over their unsupervised subordinate categories, called “acoustic sub-topics,” and each acoustic sub-topic is represented as a probability distribution over acoustic events. Acoustic scene estimation experiments with real-life sounds showed that the proposed method could correctly extract subordinate categories of acoustic scenes.

This study proposes a two-pass spoken term detection (STD) method. The first pass uses a phoneme-based dynamic time warping (DTW)-based STD, and the second pass recomputes detection scores produced by the first pass using conditional random fields (CRF)-based triphone detectors. In the second-pass, we treat STD as a sequence labeling problem. We use CRF-based triphone detection models based on features generated from multiple types of phoneme-based transcriptions. The models train recognition error patterns such as phoneme-to-phoneme confusions in the CRF framework. Consequently, the models can detect a triphone comprising a query term with a detection probability. In the experimental evaluation of two types of test collections, the CRF-based approach worked well in the re-ranking process for the DTW-based detections. CRF-based re-ranking showed 2.1% and 2.0% absolute improvements in F-measure for each of the two test collections.

Magnet-less non-reciprocal metamaterial (MNM) synthesise artificial magnetic gyrotropy by metal ring resonator with unilateral component insertion. Clear advantage to natural magnetic material is full integrated circuit ingredient compatibility but still suffers from drawbacks of consumption power in active component and footprint of ring resonator. A new MNM structure by a varactor inserted figure of eight resonator is introduced, which enables reduction of active components by half and even smaller footprint to the original simple ring resonator structure in addition to frequency tunability.