In this paper, we propose an improved method of embedding and detecting data in a printed image using a camera of a mobile device. The proposed method is based on the data diffusion method. We discuss several problems in the conventional lens distortion correction method. In addition, the possibility of using multiple captured images by employing a motion-image-capturing technique is also examined. A method of selecting captured images that are expected to obtain a high detection rate is also proposed. From the experimental results, it is shown that the proposed method is effective for improving data detection.

Network intelligence is a discipline that builds on the capabilities of network systems to act intelligently by the usage of network resources for delivering high-quality services in a changing environment. Wide area network intelligence is a class of network intelligence in wide area network which covers the core and the edge of Internet. In this paper, we propose a system based on machine learning for wide area network intelligence. The whole system consists of a core machine for pre-training and many terminal machines to accomplish faster responses. Each machine is one of dual-hemisphere models which are made of left and right hemispheres. The left hemisphere is used to improve latency by terminal response and the right hemisphere is used to improve communication by data generation. In an application on multimedia service, the proposed model is superior to the latest deep feed forward neural network in the data center with respect to the accuracy, latency and communication. Evaluation shows scalable improvement with regard to the number of terminal machines. Evaluation also shows the cost of improvement is longer learning time.

The Android pattern unlock is a popular graphical password scheme, where a user is presented a 3×3 grid and required to draw a pattern on the onscreen grid. Each pattern is a sequence of at least four contact points with some restrictions. Theoretically, the security level of unlock patterns is determined by the size of the pattern space. However, the number of possible patterns is only known for 3×3 and 4×4 grids, which was computed by brute-force enumeration. The only mathematical formula for the number of possible patterns is a permutation-based upper bound. In this article, we present an improved upper bound by counting the number of “visible” points that can be directly reached by a point.

In this paper, we propose and analyze the opportunistic amplify-and-forward (AF) relaying scheme using antenna selection in conjunction with different adaptive transmission techniques over Rayleigh fading channels. In this scheme, the best antenna of a source and the best relay are selected for communication between the source and destination. Closed-form expressions for the outage probability and average symbol error rate (SER) are derived to confirm that increasing the number of antennas is the best option as compared with increasing the number of relays. We also obtain closed-form expressions for the average channel capacity under three different adaptive transmission techniques: 1) optimal power and rate adaptation; 2) constant power with optimal rate adaptation; and 3) channel inversion with a fixed rate. The channel capacity performance of the considered adaptive transmission techniques is evaluated and compared with a different number of relays and various antennas configurations for each adaptive technique. Our derived analytical results are verified through extensive Monte Carlo simulations.

Sound localization systems are widely studied and have several potential applications, including hearing aid devices, surveillance and robotics. However, few proposed solutions target portable systems, such as wearable devices, which require a small unnoticeable platform, or unmanned aerial vehicles, in which weight and low power consumption are critical aspects. The main objective of this research is to achieve real-time sound localization capability in a small, self-contained device, without having to rely on large shaped platforms or complex microphone arrays. The proposed device has two surface-mount microphones spaced only 20 mm apart. Such reduced dimensions present challenges for the implementation, as differences in level and spectra become negligible, and only time-difference of arrival (TDoA) can be used as a localization cue. Three main issues have to be addressed in order to accomplish these objectives. To achieve real-time processing, the TDoA is calculated using zero-crossing spikes applied to the hardware-friendly Jeffers model. In order to make up for the reduction in resolution due to the small dimensions, the signal is upsampled several-fold within the system. Finally, a coherence-based spectral masking is used to select only frequency components with relevant TDoA information. The proposed system was implemented on a field-programmable gate array (FPGA) based platform, due to the large amount of concurrent and independent tasks, which can be efficiently parallelized in reconfigurable hardware devices. Experimental results with white-noise and environmental sounds show high accuracies for both anechoic and reverberant conditions.

Extending the very popular tori interconnection networks[1]-[3], Torus-Connected Cycles (TCC) have been proposed as a novel network topology for massively parallel systems [5]. Here, the set-to-set disjoint paths routing problem in a TCC is solved. In a TCC(k,n), it is proved that paths of lengths at most kn2+2n can be selected in O(kn2) time.

In this paper, a built-in test circuit for an electrical interconnect test method is proposed to detect an open defect occurring at an interconnect between an IC and a printed circuit board. The test method is based on measuring the supply current of an inverter gate in the test circuit. A time-varying signal is provided to an interconnect as a test signal by the built-in test circuit. In this paper, the test circuit is evaluated by SPICE simulation and by experiments with a prototyping IC. The experimental results reveal that a hard open defect is detectable by the test method in addition to a resistive open defect and a capacitive open one at a test speed of 400 kHz.

Wireless body area networks (BANs) are attracting much attention due to their suitable for healthcare and medical applications. Unfortunately, electrostatic discharge (ESD) is a major electromagnetic (EM) noise source that can degrade wireless communication performance. In this study, we measure EM noise power in the 2.4GHz and 30MHz bands for indirect ESD testing specified in IEC 61000-4-2 standard, and derived a statistical ESD noise model from the measurement results. The ESD noise power was found to follow a lognormal distribution in both 2.4GHz and 30MHz bands. We use this ESD noise model to conduct bit error rate (BER) simulations in a communication channel with additive white Gaussian noise (AWGN) plus ESD noise at 2.4GHz and 30MHz bands. The result is that the BER performance is virtually the same in both bands, and decreases with the signal to noise power ratio (SNR). It is also shown that an error floor exists in the BER performances at both frequencies, which, if the ESD noise power is larger than the Gaussian noise, cannot be improved by increasing the SNR. Although the ESD noise power at 2.4GHz band is nearly 30dB smaller than that at 30MHz band, the signal attenuation along the human body at 2.4GHz band is much larger compared to 30MHz band. This may yield a similar SNR level at 30MHz and 2.4GHz bands in an ESD-dominated environment, so that the 2.4GHz band does not have an obvious merit for BAN applications. Since there are so many in-band interference sources at 2.4GHz band, the 30MHz band seems more promising for vital data transmission in a BAN scenario even in an ESD-dominated environment.

In this letter, we propose a novel discriminative representation for patterned fabric defect inspection when only limited negative samples are available. Fisher criterion is introduced into the loss function of deep learning, which can guide the learning direction of deep networks and make the extracted features more discriminating. A deep neural network constructed from the encoder part of trained autoencoders is utilized to classify each pixel in the images into defective or defectless categories, using as context a patch centered on the pixel. Sequentially the confidence map is processed by median filtering and binary thresholding, and then the defect areas are located. Experimental results demonstrate that our method achieves state-of-the-art performance on the benchmark fabric images.

We investigate the influence of launching conditions on misalignment tolerance of pluggable ballpoint-pen interconnects, where graded-index plastic optical fibers (GI POFs) are coupled with ball lenses mounted on their end faces. The lateral-misalignment tolerance of the ballpoint-pen connector decreased with an increase in the driving current of a vertical cavity surface emitting laser (VCSEL) under the center launching condition. This was attributed to the VCSEL multimode oscillation, which increased the connector coupling loss through the higher-order guided mode launching in the GI POF and the resulting output beam expansion in the ballpoint-pen connector. The driving-current dependence of the connector coupling loss could be decreased using offset launchings. For a radial launching offset of 20µm, we could obtain coupling losses below 1dB for lateral coupling offsets of ±50µm with little dependence on the driving current. This suggests that data transmission quality for misaligned connection of the GI POFs can be improved further by optimizing launching systems for the ballpoint-pen interconnects.

This paper proposes a multiband automatic tunable antenna system for wide frequency bands of 704-2690MHz for cellular wireless communication systems. The proposed system controls variable capacitors connected between the antenna and a transmitter based on the received power of a probe. Locating the probe near the tip of the antenna enables frequency-a operation. The antenna is a multiband two-arm monopole antenna printed on a 60mm × 10mm area of a 60mm × 100mm FR-4 printed circuit board (PCB). The probe is a small dipole antenna capacitively coupled with the antenna. Fine-tuning based on simple hill-climbing optimization compensates the mismatch due to the surroundings, e.g., a user's hand/head or desk assuming channel-informed rough-tuning beforehand. A prototype consisting of varicap diodes and some other devices demonstrates automatic tunability.

Established in self-organized mode between mobile terminals (MT), mobile Ad Hoc networks are characterized by a fast change of network topology, limited power dissipation of network node, limited network bandwidth and poor security of the network. Therefore, this paper proposes an efficient one round certificateless authenticated group key agreement (OR-CLAGKA) protocol to satisfy the security demand of mobile Ad Hoc networks. Based on elliptic curve public key cryptography (ECC), OR-CLAGKA protocol utilizes the assumption of elliptic curve discrete logarithm problems (ECDLP) to guarantee its security. In contrast with those certificateless authenticated group key agreement (GKA) protocols, OR-CLAGKA protocol can reduce protocol data interaction between group users and it is based on efficient ECC public key infrastructure without calculating bilinear pairings, which involves negligible computational overhead. Thus, it is particularly suitable to deploy OR-CLAGKA protocol on MT devices because of its limited computation capacity and power consumption. Also, under the premise of keeping the forward and backward security, OR-CLAGKA protocol has achieved appropriate optimization to improve the performance of Ad Hoc networks in terms of frequent communication interrupt and reconnection. In addition, it has reduced executive overheads of key agreement protocol to make the protocol more suitable for mobile Ad Hoc network applications.

A number of parallel applications run on a high-performance computing (HPC) system simultaneously. Job mapping and scheduling become crucial to improve system utilization, because fragmentation prevents an incoming job from being assigned even if there are enough compute nodes unused. Wireless supercomputers and datacenters with free-space optical (FSO) terminals have been proposed to replace the conventional wired interconnection so that a diverse application workload can be better supported by changing their network topologies. In this study we firstly present an efficient job mapping by swapping the endpoints of FSO links in a wireless HPC system. Our evaluation shows that an FSO-equipped wireless HPC system can achieve shorter average queuing length and queuing time for all the dispatched user jobs. Secondly, we consider the use of a more complicated and enhanced scheduling algorithm, which can further improve the system utilization over different host networks, as well as the average response time for all the dispatched user jobs. Finally, we present the performance advantages of the proposed wireless HPC system under more practical assumptions such as different cabinet capacities and diverse subtopology packings.

The segmentation of Mycobacterium tuberculosis images forms the basis for the computer-aided diagnosis of tuberculosis. The segmented objects are often broken due to the low-contrast objects and the limits of segmentation method. This will result in decreasing the accuracy of segmentation and recognition. A simple and effective post-processing method is proposed to connect the broken objects. The broken objects in the segmented binary images are connected based on the information obtained from their skeletons. Experimental results demonstrate the effectiveness of our proposed method.

Hough-based voting approaches have been widely used to solve many detection problems such as object and action detection. These approaches for action detection cast votes for action classes and positions based on the local spatio-temporal features of given videos. The voting process of each local feature is performed independently of the other local features. This independence enables the method to be robust to occlusions because votes based on visible local features are not influenced by occluded local features. However, such independence makes discrimination of similar motions between different classes difficult and causes the method to cast many false votes. We propose a novel Hough-based action detection method to overcome the problem of false votes. The false votes do not occur randomly such that they depend on relevant action classes. We introduce vote distributions, which represent the number of votes for each action class. We assume that the distribution of false votes include important information necessary to improving action detection. These distributions are used to build a model that represents the characteristics of Hough voting that include false votes. The method estimates the likelihood using the model and reduces the influence of false votes. In experiments, we confirmed that the proposed method reduces false positive detection and improves action detection accuracy when using the IXMAS dataset and the UT-Interaction dataset.

In this paper, a new scheme for personalized web page recommendation using multi-user search engine query information is proposed. Our contribution is a scheme that improves the accuracy of personalization for various types of contents (e.g., documents, images and music) without increasing user burden. The proposed scheme combines “preference footprints” for browsed pages with collaborative filtering. We acquire user interest using words that are relevant to queries submitted by users, attach all user interests to a page as a footprint when it is browsed, and evaluate the relevance of web pages in relation to words in footprints. The performance of the scheme is evaluated experimentally. The results indicate that the proposed scheme improves the precision and recall of previous schemes by 1%-24% and 80%-107%, respectively.

Linear feedback shift register (LFSR) reseeding is an effective method for test data reduction. However, the test patterns generated by LFSR reseeding generally have high toggle rate and thus cause high test power. Therefore, it is feasible to fill X bits in deterministic test cubes with 0 or 1 properly before encoding the seed to reduce toggle rate. However, X-filling will increase the number of specified bits, thus increase the difficulty of seed encoding, what's more, the size of LFSR will increase as well. This paper presents a test frame which takes into consideration both compression ratio and power consumption simultaneously. In the first stage, the proposed reseeding-oriented X-filling proceeds for shift power (shift filling) and capture power (capture filling) reduction. Then, encode the filled test cubes using the proposed Compatible Block Code (CBC). The CBC can X-ize specified bits, namely turning specified bits into X bits, and can resolve the conflict between low-power filling and seed encoding. Experiments performed on ISCAS'89 benchmark circuits show that our scheme attains a compression ratio of 94.1% and reduces capture power by at least 15% and scan-in power by more than 79.5%.

Rain attenuation can drastically impact the service availability of satellite communication, especially in the higher frequency bands above 20 GHz, such as the Ka-band. Several countermeasures, including site and time diversity, have been proposed to maintain satellite link service. In this paper, we evaluate the performance of a power boost beam method, which is an adaptive satellite power control technology based on using rain radar data obtained throughout Japan to forecast the power margin. Boost beam analysis is considered for different beam sizes (50, 100, 150, and 200km) and beam numbers (1-4 beams) for a total of 16 cases. Moreover, we used a constant boost power corresponding to the rainfall rate of 20mm/h. The obtained results show that in comparison to the case with no boost, the effective rain intensity in each boost case was reduced.

We have proposed composite films composed of a molecular-aligned polymer and liquid crystal (LC) for substrate-free liquid crystal displays with high-contrast images. We successfully controlled the molecular alignment of the LC and formed molecular-aligned LC droplets in the polymer by controlling the fluidity of the LC/monomer mixture and the curing rate of the monomer.

We developed flexible LC devices using coat-debond polyimide substrates with a low birefringence and etched post spacers, and clarified that flexible LCDs using post spacers with small spacer distance have a high flexibility without degradation of the image quality. This result ensured the feasibility of flexible LCDs using coat-debond method.