A simple solution for the right-angle H-plane waveguide double bend is obtained in analytic series form. The simultaneous equations are solved to obtain the transmission and reflection coefficients in fast convergent series forms. The numerical computations are performed to show the behaviors of the transmission coefficient versus frequency.

The validity of numerical design scheme of CP-PASS (Circularly Polarized Printed Array antenna composed of Strips and Slots) is considered. The strip element of CP-PASS is composed of a strip dipole and a window which increases the frequency bandwidth of the strip element. With the window, however, analysis of the antenna becomes difficult if a simple analytical model is used. The previous design procedure requierd an experimental procedure. By using modern computers, the FDTD (finite-difference time-domain) method becomes powerful tool for the analysis of 3D-structured antennas. In this paper, numerical results of the FDTD analysis for CP-PASS is compared with results from experiments. The characteristics of the unit-radiator of CP-PASS are demonstrated numerically. This paper shows that CP-PASS can be designed numerically and a new path has opened in the study of CP-PASS.

In current teleteaching systems, video conferencing systems have been used to transmit a motion video from a teacher's site. A video that captures a teacher or his or her chalkboard is transmitted to a remote site through a communication channel. Since the resolution of the video is not very high, a camera captures either a teacher or a chalkboard, but not both at the same time. Thus, remote students have difficulty in obtaining realistic sensation. Another approach to realizing teleteaching is to use a computer-based desktop conferencing system that supports a motion video and a computer-based shared chalkboard. In this approach, a teacher has to use a mouse or a handwriting tablet for input, and therefore cannot use a real chalkboard. Moreover, the teacher cannot use gestures to remote students. This paper presents a multimedia teleteaching system that integrates an electronic whiteboard with a multimedia desktop conferencing system for providing realistic sensation to remote students. The system provides two-way communication of a video and a computerized chalkboard. A teacher uses an electronic whiteboard as a real whiteboard using direct manipulation, and transmits his or her gestures to remote students by using video communication. The system provides dual views; one view is for teacher's gestures and the other is for chalkboard contents. By providing the dual views, the system can transmit teacher's gestures all the time. Since chalkboard contents are processed and displayed as computer data, students can see them clearly. With the computerized chalkboard, a teacher or a student can zoom contents, input data written on a paper using a scanner, or add annotation.

The FDDI-II is a high speed and flexible backbone LAN. It can divide the capacity into one packet-switched channel with flexible bandwidth and up to 16 isochronous channels which may be allocated for a variety of real-time services such as video and voice. How to allocate and maintain isochronous bandwidth is an important issue for supporting good services to users. The FDDI-II standard proposed a centralized scheme to achieve this goal. In this paper, we propose a new scheme in a distributed fashion for the management of isochronous bandwidth. Based on our scheme, the network can support various services in a more efficient way.

This paper presents the results of a study made to determine the line length coverage of the high-bit-rate digital subscriber line (HDSL) present in NTT's local networks. The HDSL carries one bi-directional 784 kbit/s channel per pair and supports the digital interface at 1544kbit/s by using two cable pairs. The primary purpose of this study is to estimate the range limits for candidate transmission schemes considering line installation conditions, and to determine the most promising transmission scheme and its feasibility given the environment of NTT's local networks. Pulse amplitude modulation (PAM) and quadrature amplitude modulation (QAM) transmission schemes are compared for HDSL implementation. It is shown that 2B1Q-PAM and 16-QAM generally achieve better performance than the more complicated PAM and QAM given the presence intra-system crosstalk interference (interference between identical transmission systems). The range limits determined by inter-system crosstalk interference (interference between different transmission systems) with basic rate access (BRA) implementing a burst-mode transmission method are also estimated. This paper concludes that 2B1Q-PAM achieves the best overall performance in NTT's local networks. A feasibility study of 192-6144 kbit/s transmission is also described.

This paper presents an alternative traffic model for an ATM multiplexer providing video, voice, image, and data services. The traffic model classifies the input traffic into two types: real-time and non-real-time. The input process for realtime traffic is periodic and correlated, while that for non-realtime traffic is batch Poisson and independent. This multiplexer is assumed to be a priority queueing system with synchronous servers operating on time-frame basis and with separate finite buffers for each type of traffic. State probabilities and performance measures are successfully obtained using a Markov analysis technique and an application of the residue theorem in complex variable. The results can be applied in the design of an ATM multiplexer.

This paper proposes the concept of Tool-Based Direct Deformation Method (TB-DDM) which supports networked CAD (Computer Aided Design) systems with virtual reality technologies. TB-DDM allows designers to sculpt free forms directly with tools; each tool has its deforming characteristics, such as, the area and the shape of deformation. TB-DDM's direct deformation interface is independent of form representations because the system automatically calculates appropriate deformation according to its form representation when a tool pushes" a form. The deformation with TB-DDM is concisely described by the initial shape, types of tools, and thier loci; the description enables cooperative CAD systems with narrow bandwidth network to share design process rapidly and to distribute computational load.

The many-user networked virtual world system InterSpace" is described. This system's main purpose is to enhance the user's communication activities. In InterSpace, the real world information is embedded in the shared virtual world as a combination of video and CG images. Users can ovserve and access this information by simply looking and approaching embedded images. The concept of InterSpace and a prototype system of this service are introduced.

A multi-stage noise-shaping (MASH) A/D converter combining an RC-integrator and a digital correction technique for high accuracy is described. Using 1.2-µm BiCMOS technology, we developed an A/D converter for digital audio with an S/N ratio of over 100 dB. This paper discusses the principles of MASH technology with an RC-integrator, the technique for correcting RC variation, and the experimental results obtained with a fabricated chip.

The double-stage threshold-type foreground-background congestion control for the common-store queueing system with multiple nonpreemptive priority classes is proposed to improve the transient performance, where the numbers of accepted priority packets in both foreground and background stores are controlled under the double-stage threshold-type scheduling. In the double-stage threshold-type congestion control, the background store is used for any priority packets, and some parts of the background store are reserved for lower-priority packets to accommodate more lower-priority packets in the background store, whereas some parts of the foreground store are reserved for higher-priority packets to avoid the priority deadlock. First, we derive the general set of coupled differential equations describing the system-state, and the expressions for mean system occupancy, throughput and loss probability. Second, the transient behavior of system performance is evaluated from the time-dependent state probabilities by using the Runge-Kutta procedure. It is shown that when the particular traffic class becomes overloaded, high throughputs and low loss probabilities of other priority classes can be obtained.

When a new digital broadcasting system is introduced for the viewers, it is important to be able to include new services and system aspects. That is to give the viewers new experiences and meet the demands they might have in the future. To fulfil the viewers expectations, is a key for success for the introduction of new service and product. It is equally important to look at the long term perspective and have the possibility to gradually develop the digital broadcasting systems we establish today. A fully integrated multimedia system is a hybrid of different media services, distribution paths and display object. The pros and cons of each of them must be examined and each of them used where best suited. This will probably give a more complex media world with fuzzy borders between what is broadcasting, packaged media and what is the on-line information society. In order to balance this, any new digital multimedia system needs to be developed with an open architecture, based on generally agreed standards and possibly follow a non-proprietary approach. IDUN, a prototype system for multimedia broadcasting, is on its way to fulfil these requirements. IDUN combines the powerful point to multi-point emission, domestic data storage and computer processing with the telecommunication network. It is feasible to introduce it in the analogue world of today but could better be utilised in a fully digital future. Some possible services are further proposed. Some of them with a tight relation to what a broadcaster already produces, which could give an evolutionary transfer to the new digital world.

A timing-driven global routing algorithm is proposed that directly models the path-based timing constraints. By keeping track of the critical path delay and channel densities, and using novel heuristic criteria, it can select routing paths that minimize area as well as satisfy the timing constraints. Using bipolar-specific features, this router can be used to design LSI chips that handle signals with speeds greater that a gigabit per second. Experimental results shows an average delay improvement of 17.6%.

Video compression technologies such as MPEG have enabled the efficient use of video data in the computer environment. However, the compressed video information still has a huge amount of data compared with the other media such as text, audio, and graphics. Therefore, it is very important to handle the video information in a networked database for the efficient use of resources like storage media. Furthermore, in the networked database, its retrieval methods including search and delivery become the key issues especially for the video information which requires a large network bandwidth. In this paper, a video browsing method using an automatic fast scene cut detection for networked video database access is described. The scene cut is defined as the scene change frame and is detected by temporal change in interframe luminance difference and chrominance correlation which are obtained from spatio-temporally scaled image directly extracted from the MPEG compressed video without any complex processing of video decoding. The detected scene change frames are further investigated to exploit the relationship between the scene cuts and are classified in order to make a hierarchical indexing. These results of detection are stored as an scene index file using the MPEG format. The simulation results are also presented for several test video sequences to show that these methods have enabled the efficient video database construction and accessing.

This paper presents a heuristic floorplanning method that improves the method proposed by Vijayan and Tsay. It is based on tentative insertion of constraints, that intentionally produces redundant constraints to make it possible to search in a wide range of solution space. The proposed method can reduce the total area of blocks with the removal and insertion of constraints on the critical path in both horizontal and vertical constraint graphs. Experimental results for MCNC benchmarks showed that the quality of solutions of the proposed method is better than [7],[8] by about 15% on average, and even for the large number of blocks, the proposed method keeps the high quality of solutions.

This paper describes an adaptively weighted code division multiplexing (AW-CDM) system, in other words, power controlled spread-spectrum multiplexing system and describes its application to hierarchical digital broadcasting of television signals. The AW-CDM, being combined with multi-resolutional video encoder, can provide such a hierarchical transmission that allows both high quality services for fixed receivers and reduced quality services for mobile/portable receivers. The carrier and the clock are robustly regenerated by using a spread-spectrum multiplexed pseudorandom noise (PN) sounder as a reference in the receiver. The PN reference is also used for Rake combining with signals via different paths, and for adaptive equalization (EQ). In a prototype AW-CDM modem, three layers of hierarchical video signals (highs: 5.91Mbps, middles: 1.50Mbps, and lows: 0.46 Mbps) are divided into a pair of 64 orthogonal spread-spectrum subchannels, each of which can be given a different priority and therefore a different threshold. In this case, three different thresholds are given. The modem's transmission rate is 9.7Mbps in the 6MHz band. Indoor transmission tests confirm that lows (weighted power layer I), middles (averaged power layer II), and highs (lightened power layer III) are retrievable under conditions in which the desired to undesired signal ratios (DURs) are respectively 0dB, 8.5dB, and 13.5dB. If the undesired signals are multipaths, these performances are dramatically improved by Rake combining and EQ. The AW-CDM system can be used for 20-30 Mbps advanced television (ATV) transmission in the 6-MHz bandwidth simply by changing the binary inputs into quaternary or octonary inputs.

This paper presents a method, called reduced scan shift, which generates short test sequences for full scan circuits. In this method, scan shift operations can be reduced, i.e., not all but part of flip-flops (FFs) are controlled and observed. This method, unlike partial scan methods, does not decrease fault coverage. In the reduced scan shift, test vectors for the combinational part of a circuit are fistly generated. Since short test sequence will be obtained from the small test vectors set, test compaction techniques are used in the test vector generation. For each test vector in the obtained test set, it is found which FFs should be controlled or observed. And then a scan chain is configured so that FFs more frequently required to be controlled (observed) can be located close to the scan input (output). After the scan chain is configured, the scan shift requirement is examined for the essential faults of each test vector. Essential fault is defined to be a fault which is detected by only one test vector but not other test vectors. The order of test vectors is carefully determined by comparing the scan control requirement of a test vector with the scan observation requirement of another test vector so that unnecessary scan shift operations only for controlling or observing FFs can be reduced. A method of determining the order of test vectors with state transition is additionally described. The effectiveness of the proposed method is shown by the experimental results for benchmark circuits.

In this paper we propose a formal linearization method which permits us to transform nonlinear systems into linear systems by means of the Chebyshev interpolation. Nonlinear systems are usually represented by nonlinear differential equations. We introduce a linearizing function that consists of a sequence of the Chebyshev polynomials. The nonlinear equations are approximated by the method of Chebyshev interpolation and linearized with respect to the linearizing function. The excellent characteristics of this method are as follows: high accuracy of the approximation, convenient design, simple operation, easy usage of computer, etc. The coefficients of the resulting linear system are obtained by recurrence formula. The paper also have error bounds of this linearization which show that the accuracy of the approximation by the linearization increases as the order of the Chebyshev polynomials increases. A nonlinear filter is synthesized as an application of this method. Numerical computer experiments show that the proposed method is able to linearize a given nonlinear system properly.

By applying Wigner distribution, which has high time resolution and high random noise reducing capability, to the acoustic bio–signals, the possibility of early diagnosis in both intracranial vascular deformation and prosthetic cardiac valve malfunction increased. Especially in latter case, 1st–order local moment of the distribution showed its effectiveness.

Precise measurements of temperature dependence of the Andreev reflection current for the N–I–S junctions were carried out. Au and Pb were used as N (normal metal) and S (superconducting material), respectively. The experimental results agreed with the analyses based on the Arnold theory.

A coupled-mode analysis of a symmetric planar nonlinear directional coupler (NLDC) is presented by using a singular perturbation scheme. The effects of linear coupling and nonlinear modification of refractive index are treated to be small perturbations, and the modal fields of isolated linear waveguides are employed as the basis of propagation model. The self-consistent first-order coupled-mode equations governing the transfer of optical power along the NLDC are obtained in analytically closed form. It is shown that tha critical power for optical switching derived from the coupled-mode equations is in close agreement with that obtained by the numerical analysis using the finite difference beam propagation mathod.