Message franking is introduced by Facebook in end-to-end encrypted messaging services. It allows to produce verifiable reports of malicious messages by including cryptographic proofs, called reporting tags, generated by Facebook. Recently, Grubbs et al. (CRYPTO'17) proceeded with the formal study of message franking and introduced committing authenticated encryption with associated data (CAEAD) as a core primitive for obtaining message franking. In this work, we aim to enhance the security of message franking and introduce forward security and updates of reporting tags for message franking. Forward security guarantees the security associated with the past keys even if the current keys are exposed and updates of reporting tags allow for reporting malicious messages after keys are updated. To this end, we firstly propose the notion of key-evolving message franking with updatable reporting tags including additional key and reporting tag update algorithms. Then, we formalize five security requirements: confidentiality, ciphertext integrity, unforgeability, receiver binding, and sender binding. Finally, we show a construction of forward secure message franking with updatable reporting tags based on CAEAD, forward secure pseudorandom generator, and updatable message authentication code.

A fault-tolerant aggregate signature (FT-AS) scheme is a variant of an aggregate signature scheme with the additional functionality to trace signers that create invalid signatures in case an aggregate signature is invalid. Several FT-AS schemes have been proposed so far, and some of them trace such rogue signers in multi-rounds, i.e., the setting where the signers repeatedly send their individual signatures. However, it has been overlooked that there exists a potential attack on the efficiency of bandwidth consumption in a multi-round FT-AS scheme. Since one of the merits of aggregate signature schemes is the efficiency of bandwidth consumption, such an attack might be critical for multi-round FT-AS schemes. In this paper, we propose a new multi-round FT-AS scheme that is tolerant of such an attack. We implement our scheme and experimentally show that it is more efficient than the existing multi-round FT-AS scheme if rogue signers randomly create invalid signatures with low probability, which for example captures spontaneous failures of devices in IoT systems.

We show that every polynomial threshold function that sign-represents the ODD-MAXBITn function has total absolute weight 2Ω(n1/3). The bound is tight up to a logarithmic factor in the exponent.

HDR video is possible to display the maximum 1200% luminance, however, it is limited in SDR display. In this study, we expand high luminance area considering with perceptual performance to improve a presentation performance of HDR video in the SDR display. As results of objective experiments, it is recognized that the proposed method can improve the presentation performance maximally 0.8dB in WPSNR.

In this paper, we propose a low-complexity and accurate noise suppression based on an a priori SNR (Speech to Noise Ratio) model for greater robustness w.r.t. short-term noise-fluctuation. The a priori SNR, the ratio of speech spectra and noise spectra in the spectral domain, represents the difference between speech features and noise features in the feature domain, including the mel-cepstral domain and the logarithmic power spectral domain. This is because logarithmic operations are used for domain conversions. Therefore, an a priori SNR model can easily be expressed in terms of the difference between the speech model and the noise model, which are modeled by the Gaussian mixture models, and it can be generated with low computational cost. By using a priori SNRs accurately estimated on the basis of an a priori SNR model, it is possible to calculate accurate coefficients of noise suppression filters taking into account the variance of noise, without serious increase in computational cost over that of a conventional model-based Wiener filter (MBW). We have conducted in-car speech recognition evaluation using the CENSREC-2 database, and a comparison of the proposed method with a conventional MBW showed that the recognition error rate for all noise environments was reduced by 9%, and that, notably, that for audio-noise environments was reduced by 11%. We show that the proposed method can be processed with low levels of computational and memory resources through implementation on a digital signal processor.

This paper develops a design method and theoretical analysis for piecewise nonlinear oscillators that have desired circular limit cycles. Especially, the mathematical proof on existence, uniqueness, and stability of the limit cycle is shown for the piecewise nonlinear oscillator. In addition, the relationship between parameters in the oscillator and rotational directions and periods of the limit cycle trajectories is investigated. Then, some numerical simulations show that the piecewise nonlinear oscillator has a unique and stable limit cycle and the properties on rotational directions and periods hold.

Majority operation has been paid attention as a basic element of beyond-Moore devices on which logic functions are constructed from Majority elements and inverters. Several optimization methods are developed to reduce the number of elements on Majority-Inverter Graphs (MIGs) but more area and power reduction are required. The paper proposes a new exact synthesis method for MIG based on a new topological constraint using node levels. Possible graph structures are clustered by the levels of input nodes, and all possible structures can be enumerated efficiently in the exact synthesis compared with previous methods. Experimental results show that our method decreases the runtime up to 25.33% compared with the fence-based method, and up to 6.95% with the partial-DAG-based method. Furthermore, our implementation can achieve better performance in size optimization for benchmark suites.

Considering the growth of the IoT network, there is a demand for a decentralized solution. Incorporating the blockchain technology will eliminate the challenges faced in centralized solutions, such as i) high infrastructure, ii) maintenance cost, iii) lack of transparency, iv) privacy, and v) data tampering. Blockchain-based IoT network allows businesses to access and share the IoT data within their organization without a central authority. Data in the blockchain are stored as blocks, which should be validated and added to the chain, for this consensus mechanism plays a significant role. However, existing methods are not designed for IoT applications and lack features like i) decentralization, ii) scalability, iii) throughput, iv) faster convergence, and v) network overhead. Moreover, current blockchain frameworks failed to support resource-constrained IoT applications. In this paper, we proposed a new consensus method (WoG) and a lightweight blockchain framework (iLEDGER), mainly for resource-constrained IoT applications in a permissioned environment. The proposed work is tested in an application that tracks the assets using IoT devices (Raspberry Pi 4 and RFID). Furthermore, the proposed consensus method is analyzed against benign failures, and performance parameters such as CPU usage, memory usage, throughput, transaction execution time, and block generation time are compared with state-of-the-art methods.

The radio map of wireless communications should be surveyed in advance when installing base stations to efficiently utilize radio waves. Generally, this is calculated using radio wave propagation simulation. Because the simulation is time-consuming, a tensor-rank minimization-based interpolation method has been proposed as fast method. However, this method interpolates the radio map using an iterative algorithm. The number of iterations required for further acceleration should be reduced; therefore, we propose a tensor interpolation using rank minimization that considers the characteristics of radio wave propagation. Furthermore, we proved that the proposed method could interpolate with fewer iterations than the existing method.

In this paper, the notion of 2-tuples distribution matrices of the rotation symmetric orbits is proposed, by using the properties of the 2-tuples distribution matrix, a new characterization of 2-resilient rotation symmetric Boolean functions is demonstrated. Based on the new characterization of 2-resilient rotation symmetric Boolean functions, constructions of 2-resilient rotation symmetric Boolean functions (RSBFs) are further studied, and new 2-resilient rotation symmetric Boolean functions with prime variables are constructed.

This letter is devoted to constructing new Type-II Z-complementary pairs (ZCPs). A ZCP of length N with ZCZ width Z is referred to in short by the designation (N, Z)-ZCP. Inspired by existing works of ZCPs, systematic constructions of (2N+3, N+2)-ZCPs and (4N+4, 7/2N+4)-ZCPs are proposed by appropriately inserting elements into concatenated GCPs. The odd-length binary Z-complementary pairs (OB-ZCPs) are Z-optimal. Furthermore, the proposed construction can generate even-length binary Z-complementary pairs (EB-ZCPs) with ZCZ ratio (i.e. ZCZ width over the sequence length) of 7/8. It turns out that the PMEPR of resultant EB-ZCPs are upper bounded by 4.

Cell-free massive MIMO (CF-mMIMO), which cooperatively utilizes a large number of antennas deployed over a communication area, has been attracting great attention as an important technology for realizing 5G-advanced and 6G systems. Recently, to ensure system scalability and mitigate inter-user interference in CF-mMIMO, a user-centric (UC) approach was investigated. In this UC approach, user-centric antenna-sets are formed by selecting appropriate antennas for each user, and postcoding is applied to reduce the strong interference from users whose antenna-sets overlap. However, in very high user density environments, since the number of interfering users increases due to increased overlapping of antenna-sets, the achievable link capacity may degrade. In this paper, we propose a user-cluster-centric (UCC) approach, which groups neighborhood users into a user-cluster and associates the predetermined number of antennas to this user-cluster for spatial multiplexing. We derive the uplink postcoding weights and explain the effectiveness of the proposed UCC approach in terms of the computational complexity of the weight computation. We also compare the uplink user capacities achievable with UC and UCC approaches by computer simulation and clarify situations where the UCC approach is effective. Furthermore, we discuss the impact of the number of interfering users considered in the zero-forcing and minimum mean square error postcoding weight computation on the user capacity.

A 2-D beam scanning array antenna fed by a compact 16-way 2-D beamforming network (BFN) designed in Broadside Coupled Stripline (BCS) is addressed. The proposed 16-way 2-D BFN is formed by interconnecting two groups of 4x4 Butler Matrix (BM). Each group is composed of four compact 4x4 BMs. The critical point of the design is to propose a simple and compact 4x4 BM without crossover in BCS to achieve a better transmission coefficient of the 16-way 2-D BFN with reduced size of merely 0.8λ0×0.8λ0×0.04λ0. Moreover, the complexity of the interface connection between the 2-D BFN and the 4x4 patch array antenna is reduced by using probe feeding. The 16-way 2-D BFN is able to produce the phase shift of ±45°, and ±135° in x- and y- directions. The 2-D BFN is easily integrated under the 4x4 patch array to form a 2-D phased array capable of switching 16 beams in both elevation and azimuth directions. The area of the proposed 2-D beam scanning array antenna module has been significantly reduced to 2λ0×2λ0×0.04λ0. A prototype operating in the frequency range of 4-6GHz is fabricated and measured to validate the concept. The measurement results agree well with the simulations.

With the rapid increase in the amount of data communication in 5G networks, there is a strong demand to reduce the power of the entire network, so the use of highly power-efficient millimeter-wave (mm-wave) networks is being considered. However, while mm-wave communication has high power efficiency, it has strong straightness, so it is difficult to secure stable communication in an environment with blocking. Especially when considering use cases such as autonomous driving, continuous communication is required when transmitting streaming data such as moving images taken by vehicles, it is necessary to compensate the blocking problem. For this reason, the authors examined an optimum radio access technology (RAT) selection scheme which selects mm-wave communication when mm-wave can be used and select wide-area macro-communication when mm-wave may be blocked. In addition, the authors implemented the scheme on a prototype device and conducted field tests and confirmed that mm-wave communication and macro communication were switched at an appropriate timing.

This paper investigates a service deployment model for network function virtualization which handles per-flow priority to minimize the deployment cost. Service providers need to implement network services each of which consists of one or more virtual network functions (VNFs) with satisfying requirements of service delays. In our previous work, we studied the service deployment model with per-host priority; flows belonging to the same service, for the same VNF, and handled on the same host have the same priority. We formulated the model as an optimization problem, and developed a heuristic algorithm named FlexSize to solve it in practical time. In this paper, we address per-flow priority, in which flows of the same service, VNF, and host have different priorities. In addition, we expand FlexSize to handle per-flow priority. We evaluate per-flow and per-host priorities, and the numerical results show that per-flow priority reduces deployment cost compared with per-host priority.

This paper proposes a backup resource allocation model for virtual network functions (VNFs) to minimize the total allocated computing capacity for backup with considering the service delay. If failures occur to primary hosts, the VNFs in failed hosts are recovered by backup hosts whose allocation is pre-determined. We introduce probabilistic protection, where the probability that the protection by a backup host fails is limited within a given value; it allows backup resource sharing to reduce the total allocated computing capacity. The previous work does not consider the service delay constraint in the backup resource allocation problem. The proposed model considers that the probability that the service delay, which consists of networking delay between hosts and processing delay in each VNF, exceeds its threshold is constrained within a given value. We introduce a basic algorithm to solve our formulated delay-constraint optimization problem. In a problem with the size that cannot be solved within an acceptable computation time limit by the basic algorithm, we develop a simulated annealing algorithm incorporating Yen's algorithm to handle the delay constraint heuristically. We observe that both algorithms in the proposed model reduce the total allocated computing capacity by up to 56.3% compared to a baseline; the simulated annealing algorithm can get feasible solutions in problems where the basic algorithm cannot.

Nowadays, in various wireless sensor networks, both aperiodically generated packets like event detections and periodically generated ones for environmental, machinery, vital monitoring, etc. are transferred. Thus, packet loss caused by collision should be suppressed among aperiodic and periodic packets. In addition, some packets for wireless applications such as factory IoT must be transferred within permissible end-to-end delays, in addition to improving packet loss. In this paper, we propose transmission timing control of both aperiodic and periodic packets at an upper layer of medium access control (MAC). First, to suppress packet loss caused by collision, transmission timings of aperiodic and periodic packets are distributed on the time axis. Then, transmission timings of delay-bounded packets with permissible delays are assigned within the bounded periods so that transfer within their permissible delays is possible to maximally satisfy their permissible delays. Such control at an upper layer has advantages of no modification to the MAC layer standardized by IEEE 802.11, 802.15.4, etc. and low sensor node cost, whereas existing approaches at the MAC layer rely on MAC modifications and time synchronization among all sensor nodes. Performance evaluation verifies that the proposed transmission timing control improves packet loss rate regardless of the presence or absence of packet's periodicity and permissible delay, and restricts average transfer delay of delay-bounded packets within their permissible delays comparably to a greedy approach that transmits delay-bounded packets to the MAC layer immediately when they are generated at an upper layer.

Machine learning (ML) has been used for various tasks in network operations in recent years. However, since the scale of networks has grown and the amount of data generated has increased, it has been increasingly difficult for network operators to conduct their tasks with a single server using ML. Thus, ML with edge-cloud cooperation has been attracting attention for efficiently processing and analyzing a large amount of data. In the edge-cloud cooperation setting, although transmission latency, bandwidth congestion, and accuracy of tasks using ML depend on the load balance of processing data with edge servers and a cloud server in edge-cloud cooperation, the relationship is too complex to estimate. In this paper, we focus on monitoring anomalous traffic as an example of ML tasks for network operations and formulate transmission latency, bandwidth congestion, and the accuracy of the task with edge-cloud cooperation considering the ratio of the amount of data preprocessed in edge servers to that in a cloud server. Moreover, we formulate an optimization problem under constraints for transmission latency and bandwidth congestion to select the proper ratio by using our formulation. By solving our optimization problem, the optimal load balance between edge servers and a cloud server can be selected, and the accuracy of anomalous traffic monitoring can be estimated. Our formulation and optimization framework can be used for other ML tasks by considering the generating distribution of data and the type of an ML model. In accordance with our formulation, we simulated the optimal load balance of edge-cloud cooperation in a topology that mimicked a Japanese network and conducted an anomalous traffic detection experiment by using real traffic data to compare the estimated accuracy based on our formulation and the actual accuracy based on the experiment.

To enhance safety and efficiency in the traffic environment, developing intelligent transportation systems (ITSs) is of paramount importance. In ITSs, roadside units (RSUs) are critical components that enable the environment awareness and connectivity via using radar sensing and communications. In this paper, we focus on RSUs with multiple radar systems. Specifically, we propose a parameter selection method of multiple radar systems to enhance the overall sensing performance. Furthermore, since different radars provide different sensing and tracking results, to benefit from multiple radars, we propose fusion algorithms to integrate the tracking results of different radars. We use two commercial frequency-modulated continuous wave (FMCW) radars to conduct experiments at Hsinchu city in Taiwan. The experimental results validate that our proposed approaches can improve the overall sensing performance.

We developed a self-controllable voltage level (SVL) circuit and applied this circuit to a single-power-supply, six-transistor complementary metal-oxide-semiconductor static random-access memory (SRAM) to not only improve both write and read performances but also to achieve low standby power and data retention (holding) capability. The SVL circuit comprises only three MOSFETs (i.e., pull-up, pull-down and bypass MOSFETs). The SVL circuit is able to adaptively generate both optimal memory cell voltages and word line voltages depending on which mode of operation (i.e., write, read or hold operation) was used. The write margin (VWM) and read margin (VRM) of the developed (dvlp) SRAM at a supply voltage (VDD) of 1V were 0.470 and 0.1923V, respectively. These values were 1.309 and 2.093 times VWM and VRM of the conventional (conv) SRAM, respectively. At a large threshold voltage (Vt) variability (=+6σ), the minimum power supply voltage (VMin) for the write operation of the conv SRAM was 0.37V, whereas it decreased to 0.22V for the dvlp SRAM. VMin for the read operation of the conv SRAM was 1.05V when the Vt variability (=-6σ) was large, but the dvlp SRAM lowered it to 0.41V. These results show that the SVL circuit expands the operating voltage range for both write and read operations to lower voltages. The dvlp SRAM reduces the standby power consumption (PST) while retaining data. The measured PST of the 2k-bit, 90-nm dvlp SRAM was only 0.957µW at VDD=1.0V, which was 9.46% of PST of the conv SRAM (10.12µW). The Si area overhead of the SVL circuits was only 1.383% of the dvlp SRAM.