This paper proposes a technique that increases the lifetime of large scale integration (LSI) devices. As semiconductor technology improves at miniaturizing transistors, aging effects due to bias temperature instability (BTI) seriously affects their lifetime. BTI increases the threshold voltage of transistors thereby also increasing the delay of an electronics device, resulting in failures due to timing violations. To compensate for aging-induced timing violations, we exploit configurable approximate computing. Assuming that target circuits have exact and approximate modes, they are configured for the approximate mode if an aging sensor predicts violations. Experiments using an example circuit revealed an increase in its lifetime to >10 years.

Although the classical vector median filter (VMF) has been widely used to suppress the impulse noise in the color image, many thin color curve pixels aligned in arbitrary directions are usually removed out as impulse noise. This serious problem can be solved by the proposed method that can protect the thin curves in arbitrary direction in color image and remove out the impulse noise at the same time. Firstly, samples in the 3x3 filter window are considered to preliminarily detect whether the center pixel is corrupted by impulse noise or not. Then, samples outside a 5x5 filter window are conditionally and partly considered to accurately distinguish the impulse noise and the noise-free pixel. At last, based on the previous outputs, samples on the processed positions in a 3x3 filter window are chosen as the samples of VMF operation to suppress the impulse noise. Extensive experimental results indicate that the proposed algorithm can be used to remove the impulse noise of color image while protecting the thin curves in arbitrary directions.

Plane wave scattering from a circular conducting cylinder and a circular conducting strip has been formulated by equivalent surface currents which are postulated from the scattering geometrical optics (GO) field. Thus derived radiation far fields are found to be the same as those formulated by a conventional physical optics (PO) approximation for both E and H polarizations.

A polyphase sequence set with orthogonality consisting complex elements with unit magnitude, can be expressed by a unitary matrix corresponding to the complex Hadamard matrix or the discrete Fourier transform (DFT) matrix, whose rows are orthogonal to each other. Its matched filter bank (MFB), which can simultaneously output the correlation between a received symbol and any sequence in the set, is effective for constructing communication systems flexibly. This paper discusses the compact design of the MFB of a polyphase sequence set, which can be applied to any sequence set generated by the given logic function. It is primarily focused on a ZCZ code with q-phase or more elements expressed as A(N=qn+s, M=qn-1, Zcz=qs(q-1)), where q, N, M and Zcz respectively denote, a positive integer, sequence period, family size, and a zero correlation zone, since the compact design of the MFB becomes difficult when Zcz is large. It is shown that the given logic function on the ring of integers modulo q generating the ZCZ code gives the matrix representation of the MFB that M-dimensional output vector can be represented by the product of the unitary matrix of order M and an M-dimensional input vector whose elements are written as the sum of elements of an N-dimensional input vector. Since the unitary matrix (complex Hadamard matrix) can be factorized into n-1 unitary matrices of order M with qM nonzero elements corresponding to fast unitary transform, a compact MFB with a minimum number of circuit elements can be designed. Its hardware complexity is reduced from O(MN) to O(qM log q M+N).

In this paper, we propose a filter-and-forward relay scheme with energy harvesting for single-carrier transmission in frequency-selective channels. The relay node harvests energy from both the source node transmit signal and its own transmit signal by self-energy recycling. The signal received by the relay node is filtered to suppress the inter-symbol interference and then forwarded to the destination node using the harvested energy. We consider a filter design method based on the signal-to-interference-plus-noise power ratio maximization, subject to a constraint that limits the relay transmit power. In addition, we provide a golden-section search based algorithm to optimize the power splitting ratio of the power splitting protocol. The simulation results show that filtering and self-energy recycling of the proposed scheme are effective in improving performance. It is also shown that the proposed scheme is useful even when only partial channel state information is available.

This paper presents a method for many-to-one voice conversion using phonetic posteriorgrams (PPGs) based on an adversarial training of deep neural networks (DNNs). A conventional method for many-to-one VC can learn a mapping function from input acoustic features to target acoustic features through separately trained DNN-based speech recognition and synthesis models. However, 1) the differences among speakers observed in PPGs and 2) an over-smoothing effect of generated acoustic features degrade the converted speech quality. Our method performs a domain-adversarial training of the recognition model for reducing the PPG differences. In addition, it incorporates a generative adversarial network into the training of the synthesis model for alleviating the over-smoothing effect. Unlike the conventional method, ours jointly trains the recognition and synthesis models so that they are optimized for many-to-one VC. Experimental evaluation demonstrates that the proposed method significantly improves the converted speech quality compared with conventional VC methods.

Fresh Tea Shoot Maturity Estimation (FTSME) is the basement of automatic tea picking technique, determines whether the shoot can be picked. Unfortunately, the ambiguous information among single labels and uncontrollable imaging condition lead to a low FTSME accuracy. A novel Fresh Tea Shoot Maturity Estimating method via multispectral imaging and Deep Label Distribution Learning (FTSME-DLDL) is proposed to overcome these issues. The input is 25-band images, and the output is the corresponding tea shoot maturity label distribution. We utilize the multiple VGG-16 and auto-encoding network to obtain the multispectral features, and learn the label distribution by minimizing the Kullback-Leibler divergence using deep convolutional neural networks. The experimental results show that the proposed method has a better performance on FTSME than the state-of-the-art methods.

In this letter, a piecewise linear (PWL) sigmoid function approximation based on the statistical distribution probability of the neurons' values in each layer is proposed to improve the network recognition accuracy with only addition circuit. The sigmoid function is first divided into three fixed regions, and then according to the neurons' values distribution probability, the curve in each region is segmented into sub-regions to reduce the approximation error and improve the recognition accuracy. Experiments performed on Xilinx's FPGA-XC7A200T for MNIST and CIFAR-10 datasets show that the proposed method achieves 97.45% recognition accuracy in DNN, 98.42% in CNN on MNIST and 72.22% on CIFAR-10, up to 0.84%, 0.57% and 2.01% higher than other approximation methods with only addition circuit.

This paper describes designing a new pedestrian navigation system using a comprehensive framework called the pedestrian navigation concept reference model (PNCRM). We implement this system as a publicly-available smartphone application and evaluate its positioning performance near Omiya station's western entrance. We also evaluate users' subjective impressions of the system using a questionnaire. In both cases, promising results are obtained, showing that the PNCRM can be used as a tool for designing pedestrian navigation systems, allowing such systems to be created systematically.

Broadband amplifiers have been used in modern wireless communication systems. However, the accompanying disadvantage is that there is more nonlinear interference in the available operating frequency band. In addition to the in-band intermodulation distortion which affecting adjacent frequency bands the most important is harmonic distortion. In this letter we present a robust and low complex digital harmonic canceling model called cross-disturbing harmonic (CDH) model for broadband power amplifiers (PAs). The approach introducing cross terms is used to enhance the robustness of the model, thereby significantly increase the stability of the system. The CDH model still has excellent performance when actively reducing the number of coefficients. Comparisons are conducted between the CDH model and the other state-of-the-art model called memory polynomial harmonic (MPM) model. Experimental results show that the CDH model can achieve comparable performance as the MPM model but with much fewer (43%) coefficients.

Simultaneous multithreading technology (SMT) can effectively improve the overall throughput and fairness through improving the resources usage efficiency of processors. Traditional works have proposed some metrics for evaluation in real systems, each of which strikes a trade-off between fairness and throughput. How to choose an appropriate metric to meet the demand is still controversial. Therefore, we put forward suggestions on how to select the appropriate metrics through analyzing and comparing the characteristics of each metric. In addition, for the new application scenario of cloud computing, the data centers have high demand for the quality of service for killer applications, which bring new challenges to SMT in terms of performance guarantees. Therefore, we propose a new metric P-slowdown to evaluate the quality of performance guarantees. Based on experimental data, we show the feasibility of P-slowdown on performance evaluation. We also demonstrate the benefit of P-slowdown through two use cases, in which we not only improve the performance guarantee level of SMT processors through the cooperation of P-slowdown and resources allocation strategy, but also use P-slowdown to predict the occurrence of abnormal behavior against security attacks.

In the age of big data, recommendation systems provide users with fast access to interesting information, resulting to a significant commercial value. However, the extreme sparseness of user assessment data is one of the key factors that lead to the poor performance of recommendation algorithms. To address this problem, we propose a spectral clustering recommendation scheme with low-rank matrix completion and spectral clustering. Our scheme exploits spectral clustering to achieve the division of a similar user group. Meanwhile, the low-rank matrix completion is used to effectively predict un-rated items in the sub-matrix of the spectral clustering. With the real dataset experiment, the results show that our proposed scheme can effectively improve the prediction accuracy of un-rated items.

In this paper, the artificial noise (AN)-aided multiple-input single-output (MISO) cognitive radio network with simultaneous wireless information and power transfer (SWIPT) is considered, in which the cognitive user adopts the power-splitting (PS) receiver architecture to simultaneously decode information and harvest energy. To support secure communication and facilitate energy harvesting, AN is transmitted with information signal at cognitive base station (CBS). The secrecy energy efficiency (SEE) maximization problem is formulated with the constraints of secrecy rate and harvested energy requirements as well as primary user's interference requirements. However, this challenging problem is non-convex due to the fractional objective function and the coupling between the optimization variables. For tackling the challenging problem, a double-layer iterative optimization algorithm is developed. Specifically, the outer layer invokes a one-dimension search algorithm for the newly introduced tight relaxation variable, while the inner one leverages the Dinkelbach method to make the fractional optimization problem more tractable. Furthermore, closed-form expressions for the power of information signal and AN are obtained. Numerical simulations are conducted to demonstrate the efficiency of our proposed algorithm and the advantages of AN in enhancing the SEE performance.

The sidelobe level at tilts around 30-40 degrees in both the E and H planes due to a tapered excitation of units of 2×2 radiation slots is suppressed by introducing slit layers over a corporate-feed waveguide slot array antenna. The slit layers act as averaging the excitation of the adjacent radiating slots for sidelobe suppression in both planes. A 16×16-element array in the 70GHz band is fabricated. At the design frequency, the sidelobe levels at tilts around 30-40 degrees are suppressed from -25.4dB to -31.3dB in the E-plane and from -27.1dB to -38.9dB in the H-plane simultaneously as confirmed by measurements. They are suppressed over the desired range of 71.0-76.0GHz frequencies, compared to the conventional antenna.

For the blind estimation of short-code direct sequence spread spectrum (DSSS) signal pseudo-noise (PN) sequences, the eigenvalue decomposition (EVD) algorithm, the singular value decomposition (SVD) algorithm and the double-periodic projection approximation subspace tracking with deflation (DPASTd) algorithm are often used to estimate the PN sequence. However, when the asynchronous time delay is unknown, the largest eigenvalue and the second largest eigenvalue may be very close, resulting in the estimated largest eigenvector being any non-zero linear combination of the really required largest eigenvector and the really required second largest eigenvector. In other words, the estimated largest eigenvector exhibits unitary ambiguity. This degrades the performance of any algorithm estimating the PN sequence from the estimated largest eigenvector. To tackle this problem, this paper proposes a spreading sequence blind estimation algorithm based on the rotation matrix. First of all, the received signal is divided into two-information-period-length temporal vectors overlapped by one-information-period. The SVD or DPASTd algorithm can then be applied to obtain the largest eigenvector and the second largest eigenvector. The matrix composed of the largest eigenvector and the second largest eigenvector can be rotated by the rotation matrix to eliminate any unitary ambiguity. In this way, the best estimation of the PN sequence can be obtained. Simulation results show that the proposed algorithm not only solves the problem of estimating the PN sequence when the largest eigenvalue and the second largest eigenvalue are close, but also performs well at low signal-to-noise ratio (SNR) values.

This paper describes a method of measuring the unsymmetric voltage of conducted noise using a floating measurement system. Here, floating means that there is no physical connection to the reference ground. The method works by correcting the measured voltage to the desired unsymmetric voltage using the capacitance between the measurement instrument and the reference ground plane acting as the return path of the conducted electromagnetic noise. The existing capacitance measurement instrument needs a probe in contact with the ground, so it is difficult to use for on-site measurement of stray capacitance to ground at troubleshooting sites where the ground plane is not exposed or no ground connection point is available. The authors have developed a method of measuring stray capacitance to ground that does not require physical connection of the probe to the ground plane. The developed method can be used to estimate the capacitance between the measurement instrument and ground plane even if the distance and relative permittivity of the space are unknown. And a method is proposed for correcting the voltage measured with the floating measurement system to obtain the unsymmetric voltage of the noise by using the measured capacitance to ground. In the experiment, the unsymmetric voltage of a sinusoidal wave transmitting on a co-axial cable was measured with a floating oscilloscope in a shield room and the measured voltage was corrected to within 2dB of expected voltage by using the capacitance measured with the developed method. In addition, the voltage of a rectangular wave measured with the floating oscilloscope, which displays sag caused by the stray capacitance to ground, was corrected to a rectangular wave without sag. This means that the phase of the unsymmetric voltage can also be corrected by the measured stray capacitance. From these results, the effectiveness of the proposed methods is shown.

An effect of complex permeability of noise suppression sheets (NSS) on circuit parameters was investigated by a magnetic circuit analysis using cross-sectional size and material parameters. The series resistance and inductance of the coplanar waveguide (CPW) with a NSS considering the effect of the complex permeability of the NSS were quantitatively estimated. The result indicated that the imaginary and real part of the effective permeability affected the resistance and inductance, respectively. Furthermore, this analysis was applied to an 8-µm-wide CPW with a 0.5-µm-thick Co85Zr3Nb12 film for quantitative estimation of the resistance, the inductance and the characteristic impedance. The estimated parameters were almost similar to the measured values. These results showed that the frequency characteristics of the circuit parameters could be controlled by changing size and material parameters.

In IoT (Internet-of-Things) era, the number and variety of hardware devices becomes continuously increasing. Several IoT devices are utilized at infrastructure equipments. How to maintain such IoT devices is a serious concern. Capacitance measurement is one of the powerful ways to detect anomalous states in the structure of the hardware devices. Particularly, measuring capacitance while the hardware device is running is a major challenge but no such researches proposed so far. This paper proposes a capacitance measuring device which measures device capacitance in operation. We firstly combine the AC (alternating current) voltage signal with the DC (direct current) supply voltage signal and generates the fluctuating signal. We supply the fluctuating signal to the target device instead of supplying the DC supply voltage. By effectively filtering the observed current in the target device, the filtered current can be proportional to the capacitance value and thus we can measure the target device capacitance even when it is running. We have implemented the proposed capacitance measuring device on the printed wiring board with the size of 95mm × 70mm and evaluated power consumption and accuracy of the capacitance measurement. The experimental results demonstrate that power consumption of the proposed capacitance measuring device is reduced by 65% in low-power mode from measuring mode and proposed device successfully measured capacitance in 0.002μF resolution.

Analyzing aging-induced delay degradations of ring oscillators (ROs) is an effective way to detect recycled field-programmable gate arrays (FPGAs). However, it requires a large number of RO measurements for all FPGAs before shipping, which increases the measurement costs. We propose a cost-efficient recycled FPGA detection method using a statistical performance characterization technique called virtual probe (VP) based on compressed sensing. The VP technique enables the accurate prediction of the spatial process variation of RO frequencies on a die by using a very small number of sample RO measurements. Using the predicted frequency variation as a supervisor, the machine-learning model classifies target FPGAs as either recycled or fresh. Through experiments conducted using 50 commercial FPGAs, we demonstrate that the proposed method achieves 90% cost reduction for RO measurements while preserving the detection accuracy. Furthermore, a one-class support vector machine algorithm was used to classify target FPGAs with around 94% detection accuracy.

To solve the area and power problems in Finite Impulse Response (FIR) implementations, a faithfully truncated adder-based FIR design is presented in this paper for significant area and power savings while the predefined output accuracy can still be obtained. As a solution to the accuracy loss caused by truncated adders, a static error analysis on the utilization of truncated adders in FIRs was performed. According to the mathematical analysis, we show that, with a given accuracy constraint, the optimal truncated adder configuration for an area-power efficient FIR design can be effortlessly determined. Evaluation results on various FIR implementations by using the proposed faithfully truncated adder designs showed that up to 35.4% and 27.9% savings in area and power consumption can be achieved with less than 1 ulp accuracy loss for uniformly distributed random inputs. Moreover, as a case study for normally distributed signals, a fixed 6-tap FIR is implemented for electrocardiogram (ECG) signal filtering was implemented, in which even with the increased truncated bits up to 10, the mean absolute error (Ē) can be guaranteed to be less than 1 ulp while up to 29.7% and 25.3% savings in area and power can be obtained.