In this paper, a robust sound source localization approach is proposed. The approach retains good performance even when model errors exist. Compared with previous work in this field, the contributions of this paper are as follows. First, an improved broad-band and near-field array model is proposed. It takes array gain, phase perturbations into account and is based on the actual positions of the elements. It can be used in arbitrary planar geometry arrays. Second, a subspace model errors estimation algorithm and a Weighted 2-Dimension Multiple Signal Classification (W2D-MUSIC) algorithm are proposed. The subspace model errors estimation algorithm estimates unknown parameters of the array model, i.e., gain, phase perturbations, and positions of the elements, with high accuracy. The performance of this algorithm is improved with the increasing of SNR or number of snapshots. The W2D-MUSIC algorithm based on the improved array model is implemented to locate sound sources. These two algorithms compose the robust sound source approach. The more accurate steering vectors can be provided for further processing such as adaptive beamforming algorithm. Numerical examples confirm effectiveness of this proposed approach.

This paper presents a high resolution Direction-Of-Arrival (DOA) estimation method using unwrapped phase information of MUSIC-based noise subspace. Superresolution DOA estimation methods such as MUSIC, Root-MUSIC and ESPRIT methods are paid great attention because of their brilliant properties in estimating DOAs of incident signals. Those methods achieve high accuracy in estimating DOAs in a good propagation environment, but would fail to estimate DOAs in severe environments like low Signal-to-Noise Ratio (SNR), small number of snapshots, or when incident waves are coming from close angles. In MUSIC method, its spectrum is calculated based on the absolute value of the inner product between array response and noise eigenvectors, means that MUSIC employs only the amplitude characteristics and does not use any phase characteristics. Recalling that phase characteristics plays an important role in signal and image processing, we expect that DOA estimation accuracy could be further improved using phase information in addition to MUSIC spectrum. This paper develops a procedure to obtain an accurate spectrum for DOA estimation using unwrapped and differentiated phase information of MUSIC-based noise subspace. Performance of the proposed method is evaluated through computer simulation in comparison with some conventional estimation methods.

An adaptive chirp beamforming method is proposed to solve the bias problem in the direction-of-arrival (DOA) estimation of wideband chirp signals that have identical time-frequency parameters yet emanate from different directions. The proposed method, based on the steered minimum variance (STMV) method, exploits the time-frequency structure of a chirp signal to improve the DOA estimation performance by effectively suppressing the wideband chirp interferences causing the bias. Simulations are performed to demonstrate the effectiveness of the proposed method.

This letter presents a method that offers the simple calculation of the electric shielding effectiveness of a collinear unequal narrow slot array in a planar conducting screen. An integral equation for an aperture electric field on the unequal narrow slot array is used instead of coupled integral equations for a multiple slot and solved by applying Galerkin's method of moments. Numerical results illustrate the shielding effectiveness and aperture electric field distributions of the collinear unequal two-narrow slot array by using single integral equation.

Pulse radars with UWB signals are promising as a high-resolution imaging technique that can be used for the non-destructive measurement of surface details in industrial products such as antennas and aircraft. We have already proposed a fast 3-D imaging algorithm, SEABED, that utilizes a reversible transform between the time delay and the target boundary. However, data acquisition is time-consuming when obtaining an accurate image because it assumes a mono-static radar with 2-D scanning of an antenna. In this paper, we utilize linear array antennas and propose a fast and accurate imaging algorithm. We extend the reversible transform for mono-static radars to apply to bi-static radars to reduce the data acquisition time. The effectiveness of the proposed method is verified with numerical simulations and experiments.

In block transmission systems, performance degrades due to inter-block interference (IBI) when there are multipaths with delays exceeding cyclic prefix (CP) length. An interesting technique to overcome this problem is an array antenna proposed by Hori et al., which restores the CP property by minimizing a cost function. However, its performance has not been theoretically cleared. In this letter, the performance of a method which minimizes the cost function under a unit norm constraint is analyzed. It is shown that the method can suppress IBI and its interference suppression capability depends on a certain parameter. The analytical result is verified through computer simulation.

Lightweight single-layer slotted waveguide array antennas are fabricated using plastic materials with metal-plating. A plastic material that has good heat-radiation properties is investigated. Three types of antennas are fabricated by milling, using ABS resin, heat-radiating plastic, and aluminum alloy. In measurements, all three types of antennas are confirmed to have almost the same VSWR and gain in the 25 GHz frequency band.

M-ary/SS is a version of Direct Sequence/Spread Spectrum (DS/SS) aiming to improve the spectral efficiency employing orthogonal codes. However, due to the auto-correlation property of the orthogonal codes, it is impossible to detect the symbol timing by observing correlator outputs. Therefore, conventionally, a preamble has been inserted in M-ary/SS signals. In this paper, we propose a new blind adaptive array antenna for M-ary/SS systems that combines signals over the space axis without any preambles. It is surely an innovative approach for M-ary/SS. The performance is investigated through computer simulations.

We propose an implementation of the tapped delay line adaptive array (TDLAA) at the base station for improving the BER performance of asynchronous multi-user mobile communication over fast fading channels using multiple antennas. The data of each user at the mobile station, which applies two transmit antennas, are encoded by Space Time Block Code (STBC). The proposed scheme transmits the pilot signal and information data in alternate time slots. We derive performance criteria for designing such a scheme under the assumption that the fading is classified as fast fading. We show that the proposed scheme can suppress co-channel interference (CCI) and defeat Doppler spread effectively.

We have successfully demonstrated a GaInAs/InP multiple quantum well (MQW)-based wavelength switch composed of the straight arrayed waveguide with linearly varying refractive index distribution by changing the refractive index using thermo-optic effect. Since optical path length differences between waveguides in the array were achieved through refractive index differences that were controlled by SiO2 mask design in selective metal-organic vapor phase epitaxy (MOVPE), wavelength demultiplexing, and the output port switching in each wavelength of light by the refractive index change in the array waveguides through the thermo-optic effect were achieved. We have obtained the wavelength switching and the change of transmission spectra in each output ports.

In the Intelligent Transportation System, millimeter waves are used and antennas are required beam scanning ability. In the millimeter wave operation, a lens antenna is one of the prominent candidates which achieves wide angle beam scanning. Wide angle scanning can be achieved by introducing Abbe sine condition to lens surface shaping. Authors designed the shaped lens antenna that could achieve beam scanning 30. The narrow beam widths were maintained on the scanning plane. However, the beam widths were broadened on the transverse plane and large gain reduction was appeared. It was clarified that the reason of this beam deterioration was due to the phase delay on the antenna aperture. In this paper, an array feed composed of a group of rectangular horns is employed to compensate the phase delay on the antenna aperture. In designing the array feed, because there were no examples of phase radiation pattern synthesis, a new radiation pattern synthesis method is studied. Ability of the weighting matrix contained in the Least Mean Square synthesis method is paid attention. Adequate weighting matrix is found out. Satisfactory phase radiation pattern that can compensate the phase delay and an adequate amplitude radiation pattern are achieved. As a result, the improvement of scanned beam widths and antenna gains through the array feed are ensured. And adequate horn arrangements of the array feed for improving scanned beam are clarified. Moreover, in order to examine the realization of an actual array feed, the exact electromagnetic simulation is conducted. The validity of the radiation pattern synthesis is clarified.

The center-feed in a single-layer slotted waveguide array[1]-[3] is one of the key components in polarization division duplex (PDD) wireless systems. Two center-feed arrays with orthogonal polarization and boresight beams are orthogonally arranged side-by-side for transmission and reception, simultaneously. Each antenna has extremely high XPD (almost 50 dB in measurement) and a very high isolation (over 80 dB in measurement) between two arrays is observed provided the symmetry of slot arrangement is preserved [4]. Unfortunately, the area blocked by the center feed causes high sidelobe levels. This paper proposes the ridged cross-junction multiple-way power divider for realizing blockage reduction and symmetrical slot arrangement at the same time.

Millimeter-waves integrated circuits offer a unique opportunity for a holistic design approach encompassing RF, analog, and digital, as well as radiation and electromagnetics. The ability to deal with the complete system covering a broad range from the digital circuitry to on-chip antennas and everything in between offers unparalleled opportunities for completely new architectures and topologies, which were previously impossible due the traditional partitioning of various blocks in conventional design. This can open a plethora of new architectural and system level innovation within the integrated circuit platform. This paper reviews some of the challenges and opportunities for mm-wave ICs and presents several solutions to them.

We investigate the minimum weights of simple full-length array LDPC codes (SFA-LDPC codes). The SFA-LDPC codes are a subclass of LDPC codes, and constructed algebraically according to two integer parameters p and j. Mittelholzer and Yang et al. have studied the minimum weights of SFA-LDPC codes, but the exact minimum weights of the codes are not known except for some small p and j. In this paper, we show that the minimum weights of the SFA-LDPC codes with j=4 and j=5 are upper-bounded by 10 and 12, respectively, independent from the prime number p. By combining the results with Yang's lower-bound limits, we can conclude that the minimum weights of the SFA-LDPC codes with j=4 and p>7 are exactly 10 and those of the SFA-LDPC codes with j=5 are 10 or 12.

Spread Spectrum (SS) has been widely used for various wireless systems such as cellular systems, wireless local area network (LAN) and so on. Using multiple antennas at the receiver, two-dimensional (2D) RAKE is realized over the time- and the space-domain. However, it should be noted that the 2D-RAKE receiver must detect the bit timing prior to the RAKE combining. In case of deep fading, it is often difficult to detect it due to low signal-to-noise power ratio (SNR). To solve this problem, we propose a new blind 2D-RAKE receiver based on the constant modulus algorithm (CMA). Since it does not need a priori bit timing detection, it is possible to compensate frequency selective fading even in very low SNR environments. The proposed method is particularly suitable for the software defined radio (SDR) architecture. The performance of the proposed method is investigated through computer simulations.

Satellite broadcasting in the 21-GHz band is expected to transmit large-capacity signals such as ultrahigh-definition TV. However, this band suffers from large amounts of rain attenuation. In this regard, we have been studying rain fading mitigation techniques, in which the radiation power is increased locally in the area of heavy rainfall. To design such a satellite broadcasting system, it is necessary to evaluate service availability when using the locally increased beam technique. The rain attenuation data should be derived from the rainfall rate data. We developed a method to transform rainfall rate into rain attenuation in the 21 GHz band. Then, we performed a simulation that applied the method to the analysis of the service availability for an example phased array antenna configuration. The results confirmed the service availability increased with the locally increased beam technique.

An exact computable expression is obtained for the electromagnetic field of a three-dimensional partially finite periodic array of lossless or lossy magnetodielectric spheres illuminated by a plane wave propagating parallel to the array axis. The array is finite in the direction of the array axis and is of infinite extent in the directions transverse to the array axis. Illustrative numerical examples are presented.

A variable phase shifter using a movable waffle iron metal plate comprised of iron rods a quarter-wavelength in length is proposed. A study of the waffle iron structure was carried out and the design method for creating a structure that would achieve large phase changes, small loss, and good isolation between adjacent phase shifters is discussed. Experiments on 1-port and 2-port phase shifters operating in the 5 GHz band show that they not only have low loss characteristics but also wide phase changes. Furthermore, the application to phased array antennas using the proposed phase shifter and its principle are demonstrated.

We developed a content delivery system using a partially reconfigurable FPGA to securely distribute digital content on the Internet. With partial reconfigurability of a Xilinx Virtex-II Pro FPGA, the system provides an innovative single-chip solution for protecting digital content. In the system, a partial circuit must be downloaded from a server to the client terminal to play content. Content will be played only when the downloaded circuit is correctly combined (=interlocked) with the circuit built in the terminal. Since each circuit has a unique I/O configuration, the downloaded circuit interlocks with the corresponding built-in circuit designed for a particular terminal. Thus, the interface of the circuit itself provides a novel authentication mechanism. This paper describes the detailed architecture of the system and clarify the feasibility and effectiveness of the system. In addition, we discuss a fail-safe mechanism and future work necessary for the practical application of the system.

MUSIC-based estimation of direction of arrival (DOA) using universal steering vector (USV) is experimentally studied. A four-element array antenna and a four-channel receiver are employed for the experiment. In order to improve the accuracy of DOA estimation, USV which has already included the effect of mutual coupling between array elements and effect of array elements themselves is compensated to further include the electric delay and loss of four channels in the receiver. The compensated USV (C-USV) approach proposed in this paper does not need the time-consuming measurement of array element pattern because the compensating matrix for USV is obtained by measuring the S parameters between RF input ports of the feeding cables and IF output ports of the receiver. The experimental results of MUSIC-based DOA estimation show that C-USV approach is an accurate, effective and practical method for the MUSIC-based DOA estimation.